Filters

List of pin-cushion Tenders

List of latest pin-cushion Tenders in Indian Tenders. Click on any pin-cushion Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for pin-cushion Tenders.

All-Tenders (14)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :49020313 | 19 May, 2025

Tender Value : 0

Bareilly - Uttar Pradesh

Tender for outsource work - greasing per wheelgreasing per wheel including brake shoe lining fittingking pin work (per king pin)diesel tank opening, fastening and repairengine oil with oil filter changeengine head opening, fastening tataengine head opening, fastening leylandengine head tappet fitting tataengine head tappet fitting leylandengine replacement euro-2/3 tataengine replacement euro-2/3 leylandengine replacement euro-4piston ring job completeradiator assembly replacementviscous fan assembly replacement (complete work)inter cooler assembly replacementturbo charger replacementside plate packing change (complete work) tataa.c. unit replacementa.c. unit repaircooling plate packing change (complete work)timing plate replacement (complete work)timing cover oil seal replacement (complete work)rear main engine oil seal replacement (complete work)engine flywheel replacement (complete work)cam shaft replacement (complete work engine mounting pad replacement. front/rearengine assembly (tata/leyland) (dismantling and assembly).fire pump removalfire pump removalinjector removalinjector fittinginjector complete repair (euro-2/3)fi pump lever and bush replacement. (complete work)fi pump assembly (euro-2/3) (complete work)clutch plate/pressure plate changegear box replacement 1st.40gear box replacement 1st.60 clutch release bearing replacementclutch release bearing repair.clutch sleeve cylinder replacementclutch sleeve cylinder repairclutch master cylinder replacementclutch master cylinder repairclutch booster opening and installation bs04p.shaft opening and fastening per shaftrubber cushion changing tatarubber cushion changing leylandrubber cushion with center bearing changing tatarubber cushion with center bearing changing leylandsliding yoke replacementsliding yoke repairp.shaft bearing lock repair per shaft.replacing front seal of gear box.gear box assembling (tata)gear box assembling (leyland).gear box oil change (tata).gear box oil change (leyland).gear lever setting tatagear lever setting leylandclutch plate repair (tata).clutch plate repair (leyland).pressure plate repair (tata).pressure plate repair (leyland) front spring replacement per piecefront spring repair per piece.front chassis bracket replacement per piecefront brake drum replacementfront brake diaphragm assembly replacementdiaphragm washer replacementfront axle complete opening/fittingfront axle complete assembling.toy rod repair.push & pull rod repair.front stub axle opening/fittingfront haw opening/fittingrear spring replacement per piecerear spring repair per piecerear chassis bracket per piececrown cage roughly complete replacementcrown cage assembly complete repair rear axle complete disassemblyrear axle complete assembling.rear diaphragm assembly replacementrear brake drum replacementhub opening/fixingaccelerator cavity replacementsteering box awning replacedsteering rod & steering wheel replacementpower steering vane pump replacementpower steering vane pump repair.steering box overhaulair dire fittingair dire repair.dual valve repairprotection valve fittingdd unit repairdd unit replacementpressure tank replacementself starter replacementself starter repairalternator replacementalternator repaircomplete repair of wiringwiper machine fittingfog light fittingwind screen glass fitting per glass seat fitting per seatseat metal panel opening/fastening (per running feet)body structure channel straightening (per running feet)body structure angle straightening (per running feet)battery box iron fittingchassis straighteningpaneling complete bodyreplacing cushion and back rexine of one seatreplacing mazda rubberchassis u bolt tightening and fittingreplacing front glass door windowreplacing front bumper/ rear bumperreplacing front doorreplacing front doorreplacing front door grillrepairing front window screen frame replacing front wind screen framereplacing side window framerepairing rear portionfull body painting outsidepainting inside/outside by repair (running feet)painting front portion of bussoldering/tyingtube puncture repairdiameter change copychecking and correcting wheel alignment bs 6 replacing fusebs 6 changing vadri cut outbs 6 changing uds pumpbs 6 opening and installing daf nozzlebs 6 cleaning urea linebs 6 cleaning silencer (dpf)bs 6 replacing air filter primary safetybs 6 replacing urea filterbs 6 replacing steering filterbs 6 mixing tapidbs 6 replacing turbo chargerbs 6 opening wiring (common rail wiring)bs 6 opening wiring tying 2 (main wiring)bs 6 opening wiring tying 3 (wiring harness)bs 6 opening wiring tying 4 (gear wax wiring)bs 6 wiring opening & tying 5 (chassis wiring)bs 6 wiring opening & tying 6 (light wiring)front wheel overhaulingstore / loading unloading technical helper rate per day per worker (05 workers required)semi skilled labour rate per day per worker (04 workers required)skilled labour rate per day per worker

State Government

TRN :49020391 | 20 Jun, 2025

Tender Value : 0

Panaji - Goa

Tender for tender for expression of interest tender for national games sports equipment on rental basis-aquatics sports equipment 2 osb 9 starting platform equipped with false start detection system and early start detecting device with no springing effect having a non slip surface of 0.5 x 0.5 meter backstroke hand grip at 0.6 above water level with complete mounting material ready to use confirming to fina , sfi regulations of make anti / mryta 3 floating goal post as per fina specification of make malmsten / anti 4 anti-wave lanes 50 mts long of make anti / mryt 5 backstroke ledge for start of make finis 6 ball cage for 10 balls of make indian 7 ball releasing mechanism of make indian 8 athletics sports equipment 9 assorted rake (with 1.50m handle) (60cm x 20cm) of make nelco 10 cross bar stands (high jump) to hold 6 cross bars of make nelco 11 cross bar stands (pole vault) to hold 6 cross bars of make nelco 12 cutting player of make indigeneous 13 discus 1 kg steel or brass rim for competition (wa approved) minimum 3 brands of make nelco 14 discus 2 kg steel or brass rim for competition (wa approved) minimum 3 brands of make nelco 15 discus stand (20 discus in one stand) of make nelco 16 folding stool (umpires & lap scorers) of make standard 17 hammer 4.00 kg dia turned brass / iron / alloy for competition (wa approved) minimum 3 brands of make nelco 18 hammer 500 gm ms (for fixing nails) of make standard 19 hammer 7.260 kg dia turned brass/ iron/ alloy for competition (wa approved) minimum 3 brands of make nelco 20 hammer cage with door & net (as per wa rule) of make nelco 21 hammer extra wire and handle - men (wa approved) of make nelco 22 hammer extra wire and handle - women (wa approved) of make nelco 23 hammer stand (12 hammers in one stand) of make nelco 24 high jump fiber cross bar (4m) (wa approved) of make nelco 25 high jump height measuring rod - 0.00m to 2.50mof make nelco 26 high jump landing mattress with cover 6m x 4m x 0.70m of make nelco 27 high jump uprights aluminium telescopic of make nelco 28 hurdles - steeple chase including water jump 1 set (wa approved) of make nelco 29 hurdles automatic aluminium - competition (wa approved)of make ate 30 hurdles carrying trolly (20 hurdles in 1 trolly) of make standard 31 javelin 600 gm. 40m range for competition (wa approved) minimum 2 brandsof make nelco/ate 32 javelin 600 gm. 50m range for competition (wa approved) minimum 2 brandsof make nelco/ate 33 javelin 600 gm. 60m range for competition (wa approved) minimum 2 brands of make nelco/ate 34 javelin 600 gm. 70m range for competition (wa approved) minimum 2 brandsof make nelco/ate 35 javelin 600 gm. non range for competition (wa approved) minimum 2 brandsof make nelco/ate 36 javelin 800 gm. 60 m range for competition (wa approved) minimum 2 brandsof make nelco/ate 37 javelin 800 gm. 70 m range for competition (wa approved) minimum 2 brandsof make nelco/ate 38 javelin 800 gm. 80 m range forcompetition (wa approved) minimum 2 brandsof make nelco/ate 39 javelin 800 gm. 90 m range for competition (wa approved)minimum 2 brands of make nelco/ate 40 javelin 800 gm. non range for competition (wa approved) minimum 2 brandsof make nelco/ate 41 javelin stand (20 javelins in one stand) of make nelco 42 jumping mattress trolly 5m x 3m of make nelco 43 ladder for hammer retriving of make standard 44 pole rack (to hold 10 poles) of make nelco 45 pole vault box of make nelco 46 pole vault crow bar (bar lifter)4.0m long aliminium (telescopic) of make nelco 47 pole vault elastic cross bar of make nelco 48 pole vault fiber cross bar - 4.5m (wa approved) of make nelco 49 pole vault height measuring rod (0.00m to 5.50m) of make nelco 50 pole vault landing mattress (wa approved) of make nelco 51 pole vault uprights (wa approved) with base pair sets of make nelco 52 relay baton different colours with number 1 to 8 aluminium of make nelco 53 shot 4 kg of different dia from 95mm, 100mm, 105mm, 109mm and 110 mm for competition (tuned iron & alloy) minimum 2 brands wa approved of make nelco/ate 54 shot 7.260 kg different dia from 110mm, 115mm, 120mm, 125mm, 129mm, 130mm for competition (turned iron & alloy) minimum 2 brands wa approved of make nelco/ate 55 shot return channel 20m long of make nelco 56 shot stand (20 shots in stand) of make nelco 57 stand with bowl (mgco2/ gym chalk) of make nelco 58 starters stand of make nelco 59 starting blocks combatable with start information syatem wa approved of make nelco 60 starting blocks trolley (10 blocks in one trolly) of make nelco 61 concentric circle of make nelco 62 badminton sports equipment 63 hova courts of make yonex 64 umpire chair of make sanrit 65 basketball sports equipment 66 basketball trolley(to accommodate 15 balls) of make cosco 67 basketball trolley(to accommodate 8 balls) of make cosco 68 billiards & snooker sports equipment 69 sharma s1 snooker tables (12 x 6) with steel cushion long rest half rest spider rest goose neck rest cue extension chalk cues table cover iron ball spotter ball rack table brushes corner brusher of make sharma 70 boxing sports equipment 71 boxing ring (aibaapporved) of make greenhill 72 canoeing & kayaking sports equipment 73 kayak paddle 100% carbon graphite fiber available in ultra-light and stiff variant adjustable clamp on shaft with lock and unlock facility adjustable to 5 cm with a left and right angle protractor icf and ikca approvedof make braca iv 74 canoe paddle 100% carbon graphite fiber available in ultra-light and stiff variant adjustable clamp on shaft with lock and unlock facility adjustable to 5 cm with a left and right angle protractor icf and ikca approved of make braca iv 75 kayak ergometer length: 2.50 m - 3.10 m width: 0.40 m - 0.70 m height: 0.40 m - 0.70 m weight: 40 kg (approximate) povides easily readable, relevant numeric / graphic information to the athlete while training on the ergometer its display shows following updates: paddling time distance speed / power stroke rate / water-air ratio / max heart rate (requires serial interface to polar chest ribbon or similar) average speed / power graphic left / right power balance pacer icf and ikca approved of make dansprint aps 76 canoe ergometer length: 3.10 m - 3.30 m width: 0.40 m - 0.52 m height: 0.60 m - 0.70 m weight: 40 kg (approximate) povides easily readable, relevant numeric / graphic information to the athlete while training on the ergometer its display shows following updates: paddling time distance speed / power stroke rate / water-air ratio / max heart rate (requires serial interface to polar chest ribbon or similar) average speed / power graphic left / right power balance pacer icf and ikca approved of make dansprint aps 77 interval 2000 split / rate watch - stop watch included in the packages: - cr2032 batteries (2) - interval 2000 - interval protective bumper - lanyard memory: 2000 splits, best and average split, 600+ segments identified by date and time, stroke rate w/time unit weight: 2.2 oz (66.369 kg) display dimensions: 1.625 x 1.25 in buoyancy: floats (note: control unit with bumper and lanyard floats) display: high-contrast monochrome lcd backlight: blue/green electroluminescent backlight, auto-on controls: 5 buttons (3 side, 2 front), tactile and audible response. battery type: 2 cr2032 (1 display, 1 backlight) battery life expectancy: 300+ hours case: injection-molded polymer case, acrylic lensof make nielsen & kellerman 78 canoe knee pad made from lightweight and durable closed mini-cell foam that can be shaped for a custom fit and superior comfort icf and ikca approved of make braca iv 79 seats k1 icf and ikca approved of make nelo 80 seats k2 icf and ikca approved of make nelo 81 seats k4 icf and ikca approved of make nelo 82 foot rest k1 icf and ikca approved of make nelo 83 foot rest k2 icf and ikca approved of make nelo 84 foot rest k4 icf and ikca approved of make nelo 85 spare rudder k1 icf and ikca approved of make nelo 86 spare rudder k2 icf and ikca approved of make nelo 87 spare rudder k4 icf and ikca approved of make nelo 88 stop watch electronic with 100 memories included in the packages: - cr2032 batteries (2) - interval 2000 - interval protective bumper - lanyard memory: 2000 splits, best and average split, 600+ segments identified by date and time, stroke rate w/time unit weight: 2.2 oz (66.369 kg) display dimensions: 1.625 x 1.25 in buoyancy: floats (note: control unit with bumper and lanyard floats) display: high-contrast monochrome lcd backlight: blue/green electroluminescent backlight, auto-on controls: 5 buttons (3 side, 2 front), tactile and audible response. battery type: 2 cr2032 (1 display, 1 backlight) battery life expectancy: 300+ hours case: injection-molded polymer case, acrylic lens of make nielsen & kellerman 89 rope garware (in meter) of make nelo 90 balls (big size) of make nelo 91 life jackets ultra low olympic gold medal cut clever figure-hugging shoulder straps integrated side straps 50-70n of gaia environmentally friendly soft foam size available xs (weight: 30-50 kg) sm (weight: 45-70 kg) lxl (weight: 65-90 kg) xxl (weight: 85-110 kg) fl/xl (weight: 60-90 kg) icf and ikca approved of make hiko sports 92 slalom paddles 100% carbon, aluminium & titanium reinforced tips with adjustable shaft upto 5cm of make braca iv 93 spray deck canoe slalom blind stitched and latex sealed seams throughout. 10/11 mm shockcord style deck. 4/5 mm tough faced neoprene with silicone printed reinforcing on top. no seams in the deck section icf and ikca approved of make hiko sports 94 spray deck kayak slalom blind stitched and latex sealed seams throughout. 10/11 mm shockcord style deck. 4/5 mm tough faced neoprene with silicone printed reinforcing on top. no seams in the deck section icf and ikca approved of make hiko sports 95 helmet canoe slalom ultra lightweight competition helmet ideal for whitewater kayak / canoe racing, surf lifesaving, freestyle kayaking and rafting. construction material high impact ralvek thermoplastic for a stiffer, safer shell. the interior is a top grade closed cell eva foam liner. detachable fit pads give you a super comfortable custom fit without abosrbing moisture. low profile shell design foam vent inserts for cold water paddling interior impact liner is a low profileshell design, closed- cell waterproof eva foam weight 500 gms ce-1385 certified and icf approved for international and olympic layak / canoe racing icf and ikca approved of make hiko sports 96 life jackets canoe slalom ultra low olympic gold medal cut clever figure-hugging shoulder straps integrated side straps 50-70n of gaia environmentally friendly soft foam size available xs (weight: 30-50 kg) sm (weight: 45-70 kg) lxl (weight: 65-90 kg) xxl (weight: 85-110 kg) fl/xl (weight: 60-90 kg) icf and ikca approved of make hiko sports 97 jetties for canoe sprint material: high density polyethylene (hdpe), marlex hdpe 50100 / qtr 571 cube dimensions: 500mm x 500mm x 400mm higher holding strength - corrugated design sides to interlock cubes together for higher pressure resistance and strength in water & provision to pass cables or pipes under the cover top cover: separate cover made of marlex hdpe 50100 / qtr 571 with 20mm thick and antiskid design for extra strength & prevent wear & tear lug thickness: 22mm (+-5%)to ensure sufficient strength min. weight of cube with cover 8.5 kgs/cube (+-5%) buoyancy: 360 kgs/sq. mtr flat floor, floor stiffening with painted grip accessories and connectors: made of same hdpe material to avoid any frictional damages complete accessories, short pin, short screw & nuts, cleat, washer, required for constructing floating surface including rope ua radiation proof buoyancy test report qb 1557-1992 diagonal tensile strength test report gb/t 1040.1-2006 compressive strength test: gb/t 8813-2008 supply, installation and handover of project at site hdpe side railing, height 1000mm icf and ikca approved of make indigeous 98 k2 (not more than 18kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 650 cm weight: not more than18kg icf and ikca approved of make nelo 99 k4 (not more than 30kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 1100 cm weight: not more than30kg icf and ikca approved of make nelo 100 c1 (not more than 14kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 520 cm weight: not more than14kg icf and ikca approved of make nelo 101 c2 (not more than 20kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 650 cm weight: not more than20kg icf and ikca approved of make nelo 102 c4 (not more than 30kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 900 cm weight: not more than30kg icf and ikca approved of make nelo 103 judo sports equipment 104 judo mats for competition and warm up area (tatami) of make taishan 105 kabaddi sports equipment 106 synthetic kabaddi mats thickness 35-40 mm - total 1500 pieces for 4 courts (2 court for practice and 2 for fop) of make indigeous 107 kho kho sports equipment 108 kho-kho mats (30m x 20m) size:1m x1m . density:30 mm (approved/preferred by kfi) of make gravolite 109 kho-kho poles-sheesham ( height:120-125cms above the ground & 40-50cms below the ground, wooden circumference:9-10 cms at the top & 28.25-31.4 cm at bottom.) colour:white of make shiv naresh 110 mallakhamb sports equipment 111 pole mallakhamb for competition & warm up area above the ground 2600 to 2800 mm, under the ground 800 to 900 mm, neck 180 to 200 mm, top - 70 mm, total length 3400 - 3700 mm, circumference: bottom - 530-550 mm, below the neck 300 to 350 mm, neck 180 to 200 mm, top 350 mmof make kepl khalsa 112 hanging mallakhamb for competition & warm up area height 1700 to 1900 mm, neck height 180 to 200 mm, top height - 70 mm, distance b/w bottom and ground 650-700 mm, circumference: bottom 450 to 500 mm, neck 180 to 200 mm, below the neck 250 to 300 mmof make kepl khalsa 113 structure of hanging mallakhamb for competition & warm up area height of structure/stand - 4600 to 4800 mm, width - 12 feetof make kepl khalsa 114 structure of rope mallakhamb for competition & warm up area height of structure/stand - 5800 to 6000 mm, width - 12 feetof make kepl khalsa 115 powder stand 3 feet with steel tubeof make kepl khalsa 116 rubber foam mattresses for competition and warm up area length - 2 m, width - 1 m, thickness - 6 cm to 10 cmof make kepl khalsa 117 portable mallakhamb above the ground 2600 to 2800 mm, neck 200 mm, top - 70 mm, total length 3400 - 3700 mm, circumference: bottom - 530-550 mm, below the neck 300 to 350 mm, neck 180 to 200 mm, top 350 mmof make kepl khalsa 118 modern pentathlon 119 uipm laser pistols (shooting) (model - pp320exp laser pistol set)of make ecoaims 120 uipm laser target (shooting) (model - lt600 laser hit / miss target) of make ecoaims 121 fencing piste of make absolute fencing 122 fencing apparatus of make absolute fencing 123 pencak silat sports equipment 124 arena mattress (5 cm)(1 set of 92 green, 2 yellow, 3 red, 3 blue)of make indigenous 125 roll ball sports equipment 126 goalpost (size & design as per irbf guidelines) of make indigenous 127 rowing sports equipment 128 single scull boat imported (coastal boats) of make swift racing 129 double scull boat imported (coastal boats) of make swift racing 130 4 seat catamaran importedof make swift racing 131 catamaran obm 4 stroke 25hp of make rowing solutions 132 rugby sports equipment 133 rugby specific goal posts (set of 2 goal posts) 6 inch diameter, 20m height x 4 poles & 4 inch diameter, 6m height x 2 poles of make scrum 134 sqay martial arts sports equipment 135 arena of size 10 x 10 women (sqay arena mats) yellow & purple colour mats (total 100 pieces) of make haily 136 arena of size 12 x 12 men (sqay arena mats) yellow & purple colour mats (total 144 pieces)of make haily 137 table tennis sports equipment 138 table tennis tables - show court- black of make cosco 139 umpires tables of make cosco 140 taekwondo sports equipment 141 taekwondo mats (red & blue colour, 1m x 1m x 24mm thick, daedo or kwon or any wt approved mats) of make indigeous 142 weightlifting sports equipment 143 men bar with collar (warm up & training area) of make eleiko 144 women bar with collar (warm up & training area)of make eleiko 145 discs & plates (fop main stage) (1 set disc & plates in fop (main stage) will consist of 25 kg x 4, 20 kg x 2, 15 kg x 2, 10 kg x 2, 5 kg x 2, 2.5 kg x 2, 2 kg x 2, 1.5 kg x 2, 1 kg x 2, 0.5 kg x 2) of make eleiko 146 discs & plates (warm up & training area) (16 sets disc & plates inwarmup & training area will consist of 25 kg x 2, 20 kg x 2, 15 kg x 2, 10 kg x 2, 5 kg x 2, 2.5 kg x 2, 2 kg x 2, 1.5 kg x 2, 1 kg x 2, 0.5 kg x 2)of make eleiko 147 discs racks (warm up & training area)of make eleiko 148 powder standof make eleiko 149 resin trayof make eleiko 150 warmup & training platform(3 mts. x 3mts.)of make eleiko 151 wrestling sports equipment 152 wrestling mats of make taishan 153 wushu sports equipment 154 taolu arena of make taishan 155 for warm up area - kabaddi mats thickness 35mm,1m x 1m of make rxn 156 sanda arena of make taishan 157 for warm up area - judo mats thickness 40mm, 2m x 1m of make rxn 158 yachting sports equipment 159 rescue boats 4.5 meter rib (rigid inflatable boat), with 2000mm beam, 350mm draft (including appendages), 450mm dia. hypalon coated fabric collars of 1500gsm, 1670dtex material, with 5 airtight compartments, fitted with 40hp 4-stroke obm with manual tiller steering handle and capacity of 6 people. fuel capacity of 2 external tanks of 23-liter capacity each per boat cruising speed of 16 to 18 knots. the boat should be unsinkable when flooded and fully loaded and highly maneuverable, suiting rescue operations in seas.boat to be supplied with irs class certificate. accessories to be provided: 1no. boat repair kit, anchor with rope, 2 paddles, 1 set lifting slings. 1 bollard and 2 fairleads of make chougule fiberglass 160 jury boat 4700 mm long rib (rigid inflatable boat) with fiberglass hull, breadth of 2000mm, max draft of 450mm (including appendages), with 460mm dia. hypalon coated fabric of 1500gsm, 1670dtex, having 5 nos.foam-filled compartments, with single 60 hp 4-stroke obm fitted with remote control and steering system on a center console unit. fuel capacity of 2 external tanks of 23-liter capacity each per boat. cursing speed of 18-20 knot and a capacity of 6-8 people. the boat should be unsinkable when flooded and fully loaded and highly maneuverable.boat to be supplied with irs class certification. accessories to be provided: 1no. boat repair kit, anchor with rope, 2 paddles, 1 set lifting slings. 1 bollard and 2 fairleads of make chougule fiberglass

corporations/Associations/Others

TRN :49022053 | 19 May, 2025

Tender Value : 0

Bareilly - Uttar Pradesh

Tender for tender for outsource work - greasing per wheelgreasing per wheel including brake shoe lining fittingking pin work (per king pin)diesel tank opening, fastening and repairengine oil with oil filter changeengine head opening, fastening tataengine head opening, fastening leylandengine head tappet fitting tataengine head tappet fitting leylandengine replacement euro-2/3 tataengine replacement euro-2/3 leylandengine replacement euro-4piston ring job completeradiator assembly replacementviscous fan assembly replacement (complete work)inter cooler assembly replacementturbo charger replacementside plate packing change (complete work) tataa.c. unit replacementa.c. unit repaircooling plate packing change (complete work)timing plate replacement (complete work)timing cover oil seal replacement (complete work)rear main engine oil seal replacement (complete work)engine flywheel replacement (complete work)cam shaft replacement (complete work) engine mounting pad replacement. front/rearengine assembly (tata/leyland) (dismantling and assembly).fire pump removalfire pump removalinjector removalinjector fittinginjector complete repair (euro-2/3)fi pump lever and bush replacement. (complete work)fi pump assembly (euro-2/3) (complete work)clutch plate/pressure plate changegear box replacement 10.40gear yoke replacement 10.60 clutch release wearing replacementclutch release wearing repair.clutch sleeve cylinder replacementclutch sleeve cylinder repairclutch master cylinder replacementclutch master cylinder repairclutch booster opening and installation bs04p.shop opening and fastening per shaftrubber cushion changing tatarubber cushion changing leylandrubber cushion with center bearing changing tatarubber cushion with center bearing changing leylandsliding yoke replacementsliding yoke repairp.shop fastening per shaft.replacing front seal of gear box.gear box assembling (tata)gear box assembling (leyland).gear box oil change (tata).gear box oil change (leyland).gear lever setting tatagear lever setting leylandclutch plate repair (tata).clutch plate repair (leyland).pressure plate repair (tata). pressure plate repair (leyland).front spring replacement per piecefront spring repair per piece.front chassis bracket replacement/fitment per piecefront brake drum replacementfront brake diaphragm assembly replacementdiaphragm washer replacementfront axle complete opening/fasteningfront axle complete assembling.toy rod repair.push and pull rod repair.front stove axle opening/fasteningfront haw opening/fasteningrear spring replacement per piecerear spring repair per piecerear chassis bracket per piececrown cage assembly complete replacementcrown cage assembly complete repair rear axle complete disassemblyrear axle complete assembling.replace rivet diaphragm assemblyreplace rear brake drumopening/fixing the windshieldaccelerator cable replacementsteering box arombly replacementsteering rod & steering wheel replacementpower steering vane pump replacementpower steering vane pump repair.steering walks overhaulair dyer fittingair dyer repair.dual valve repairprotection valve fittingdd unit repairdd unit replacementpressure tank replacementself starter replacementself starter repairalternator replacementalternator repaircomplete repair of wiringwiper machine fitting fog light fittingwind screen glass fitting per glassseat fitting per seatseat metal panel opening fastening (per running feet)body structure channel straightening (per running feet)body structure angle straightening (per running feet)battery box iron fittingchassis straighteningpaneling complete bodyreplacing one seat cushion and back rexinereplacing mazda rubberchassis u bolt tightening and fittingreplacing front glass retainer and biddingfront bumper / rear bumper straighteningfront shade replacementfront shade repairfront shade grill replacementfront shade grill repairfront wind screen frame repair bs 6 changing fusebs 6 changing vadi cut outbs 6 changing uds pumpbs 6 opening and installing daf nozzlebs 6 cleaning urea linebs 6 cleaning silencer (dpf)bs 6 changing air filter primary safetybs 6 changing urea filterbs 6 changing steering filterbs 6 mixing tapidbs 6 changing turbo chargerbs 6 wiring opening-tying 1 (common rail wiring)bs 6 wiring opening-tying 2 (main wiring)bs 6 wiring opening-tying 3 (wiring harness)bs 6 wiring opening 6 wiring opening 6 (chassis wiring)bs 6 wiring opening 6 (light wiring)front wheel overhaulingstore / loading unloading technical helper rate per person per day (05 persons required)semi skilled labour rate per person per day (04 persons required)skilled labour rate per person per day

corporations/Associations/Others

TRN :49026548 | 27 May, 2025

Tender Value : 15.15 Lacs

Baghpat - Uttar Pradesh

Tender for tender for providing led street light network in dark zone at iidc baghpat. - supply & fixing 90 w led street light having die cast aluminium body and diffuser with driver set suitable for 90 watt confirming to ip 66 protection complete in all respect with surge protection device. minimum cat aa (crompton/philips with 5 year warrenty against defects,damaged & missing)make: cormpton/philips/bajaj/wipro. 2 supply & fixing steel tubular pole 9.50 metre long designated 410 sp-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 3 s/f of street light junction box made of smc material complete with 4 way terminal block, cable gland etc. 4 s/f of 6 amp to 32 amp sp mcb (10ka) b curve 5 supply & fixing 32mm dia,1.20m long gi bend pipe with 02 nos. clamp of 50x6mm ms flat suitable for fixing street light on st pole including cost of men and t&p. 6 supply & fixing upsida logo plate(retro-reflective) on st pole including cost of clamp and nut & bolt as per design of e/i. 7 supply & fixing pole earthling of pole by inserting ms rod 20x2500mm in vertically ground level and connecting the pole with the help of 6 swg gi wire including cost of all material, men and t&p. in industrial area as per upsida/uppcl technical specification. 8 s/e of d clamps of 38mm x 6mm flat iron for wall/ roof type service bracket with bolts, nuts etc, complete in all respects including painting with aluminium paint 9 supply & fixing of 100 x 110 mm shackle insulator /100 x 80 mm pin insulator including g.i. bolts/ spindle nuts etc.complete in all respect.as pre uppwd sch. no. 621 10 supply, sagging & tensioning of 6 swg gi earth wire including cost of material, men and t&p 11 suppy,laying & drawing of3x1.5 sq mm pvc insulated copper cable for street/flood lights connection in existing pipe/surface/air as required including cost of material, men and t&p. (havells/polycab/grandlay) 12 supplying and laying of 25 sq.mm 3.5 core aluminium conductor pvc insulated, armoured, served, sheathed cable 1100 v grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. uppwd sch 510(j)-507 13 supply and laying of 16 sq mm 2 core aluminium conductor pvc insulated , armoured , served ,sheathed cable 1100 v grade in existing pipe/surface/pole etc.( havells/polycab/grandley) schedule 501©-507 14 supply & fixing of 25 sq. mm 3.5 core cable socket/lug with insulated tape in cable termination complete in all respect. 15 supply & fixing of 16 sq. mm 2 core cable socket/lug with insulated tape in cable termination complete in all respect. 16 supply & fixing of 25 sq. mm 3.5 core brass nickle plated compression gland for pvc insulated cable complete in all respect. 17 supply & fixing of 16 sq. mm 2 core brass nickle plated compression gland for pvc insulated cable complete in all respect. 18 providing & fixing 35mm x6mm g.i. earth strip on surface or in recess including cost of gi saddle/al. alloy/cadmium/pvc fastener etc.plated iron screw etc. as required for connections. 19 supply and fixing of ms/gi clamp as per design suitable for fixing shackle insulator, made out for 50x6mm m.s. flat including nut, bolt & washer.(for tun and t-points ) 20 supply , sagging & tensoning of overhead line with insulated acsr weasel conductor including binding etc complete in all respects. 21 supply,sagging,tensioning,jointing and binding of acsr weasel conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including materiai,men an t&p for proper completion of work . 22 cleaning & spray painting of st bend pole and power st pole ( upto 7 mtr height in case of shut down) with one coat of red oxide primerand two coat of aliminium paint/pu paint as per direction of engineer incharge including cost of all material, men and hydraulic cran,other t&p ( burger/nerolac/asian mark) 23 painting letter ( pole no. ) 2.5 cmm up to 8.0 cm size complete on street light pole/panel/other electrical properties under upsida including cost of all material , men and t&p. uppwd civilsor sch item mno.817, ch-26 24 supply & fixing of 16 mtr high mast shaft of approved make with rising system hot dip glavanized inside & out sidedip,heavingpolesheetthickness3mm.topdia minium 150 mm, bottom dia 360 mmbase plate 32 mm thicksuitable forwindvelocity asperis 875part 3& havingnocircumferentialweld,withaccessoriesfor highmastsuchasheadframesuitablefor6to12 luminaries&its controlgearboxes 1.5hppowertool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch,including making suitable foundationaspermanufaturedrawing/sitereuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. (bajaj/philips/wipro/crompton/bp & approved make in uppwd) all respect (bajaj/philips/wipro/bp & approved make in ppwd) with upsida acrylic glow shine prescribed logo 25 supply & fixing of factory wired integral 200 w led flood light luminaries with die cast aluminium housing built with driver set confirming to ip 66 protection complete in all respect, cat.-aa (bajaj/philips/wipro/crompton/approved make in uppwd) with labour. 26 supply and fixing 25a tpn capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering insteument & instrument box with cts etc. complete in all respect. (with labour) 27 supply and wiring of submain with 2 number 2.5 sqmm frlsh pvc insulated single core multistranded copper conductor cable in existing conduit complete in all respects complete. 28 supplying and laying of 16 sq.mm 4 core aluminium conductor pvc insulated, armoured, served, sheathed cable 1100 v on serface the cable run shall be fixed on ms clamps etc of suitable size or as directed by the e.i. grade at a complete in all respects cable laying in existing pipe. (havells/polycab/grandley) 29 supply & laying of 63 mm hdpe pipe isi marked along with all accessories like socket, bend, couple etc. confirming to is 14930 part il complete with fitting and cutting jointing etc direct in grownd 75 cm below ground level including excavition and refilling the trench but excluding sand cushining and protective covering etc. 30 supply & fixing of 16 sq. mm 4 core brass nickle plated compression gland for pvc insulated cable complete in all respect. 31 supply & fixing of 16 sq. mm size pin or plan type copper tin plated socket/lug to cable leads with insulated tape and making connection to point complete in all respect. 32 supply & fixing of 50 mm dia gi pipe b class for climbing up the cable from ground to over head line lt pole complete with gl fitting including material, labour and t&p as per upsidc sch item no. 25a. 1(ls 6.0 mtr for each hm) 33 supply and laying of 32mm x6mm g.i. earth strip from earth electroded directly in the ground level as required on surface or in recess including cost of gl saddle/al. alloy/cadmium/pvc fastener etc.plated iron screw etc. as required for connections. (5m for each) 34 s/b of 40 mm dia x 4.5 mtr. long g.i. pipe vertically for earthing having 12 mm dia. holes spaced 75 mm apart drilled upto 2 mtr, from the bottom complete with earthing lead of no.6 to 8 swg gi wire in g.i.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction e/i complete in all respect as per drawing uppwd sch. no. 701 35 supply & erection of stay set at 3.5 metres away from the pole complete with galvanised 19 mm dia x1.80 metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm g.i. stay wire etc. in 1:3:6 cement concrete complete in all respect. 36 supply & fixing of led light strip with driver on street light pole at central verge road no. 1 &2 including cost work t&p men and material complete in all respect. the led strip should be in tri colour as red, white and green (each colour 6 mtr.respectively.) with 01 year warranty against defects/damage/missing. 37 supply and wiring of sub main with 02 nos.of 2.5 sq.mm frlsh pvc insulated 1100 v grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and t&p required for proper completion of work as directed e/i 38 fabrication, supply and fixing of work information board in m.s. frame made by 50mm dia square pipe of stainless steel grade ss-304 & 16 mm thick base plate with back supporting of bracing by ms flat of 25x6mm and 2.85 mtr long supporting leg made from 65mm pipe ss-304 grade with proper grouting arrangement. the board should be retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 meter from ground by providing 0.45x0.45x0.60 mtr cement concrete stone pad as per drawing enclosed.the borad should be installed within 07 day of signing of contract boand.)

Government Departments

TRN :49028329 | 14 May, 2025

Tender Value : 1.90 Lacs

Jhunjhunu - Rajasthan

Tender for tender for for stationery and general items purchases-normal pen mrp 5-9 ballnormal pen mrp 5-9 gelstandard pen mrp 10-25 ballstandard pen mrp 10-25 gelofficer pen mrp 50-80 ballofficer pen mrp 50-80 gelstudent pen mrp 2-4 ballstudent attendance register 45 namestudent attendance register 55 nameemployee attendance registeremployee attendance registeremployee attendance register double meetingemployee attendance register double meetingemployee attendance register by meetinglinewise registerlinewise registerlinewise registerlinewise registerjoinwise registerletter dispatch listletter dispatch listletter receipt listeligible receipt registerpeon bushtemporary stock registertemporary stock register inspector registerbill inflation registergovernment cash bookgovernment cash bookbank column cash bookbank column cash bookbank column cash bookbank column cash book with cloth bindingcasual leave registerbalan registerlibrary book issue registerlibrary book issue registerlibeni book issue registerjaimeri book issue registerbook list registerbook list registerbook list registercotton cloth red barta (standard size)rim 10 gsm legal sizerim 70 gsm a4 sizerim 10 gsm fs sizewhite paper rim 16x26lined paper ring 16x26file cover laminated two piecefile cover laminated spring withfile pad cardboardpost paid reggian black scholarship registerstapler no. hp 45heavy duty stapler (hd 23517, 05-23524fl)stapler no. 10stapler pin bigstapler pin smallpin cushionpermanent marker pen goti sizepermanent marker pen fine sizewhite board markerhighlighter penswitch colour smallswitch colour largeswitch colour extra largepencil colour smallpencil colour largepencil colour extra largebax colour smallwax colour largewax colour extra largepaper flag 25x70 mm 3 colours 80 sheetspaper tagcoil jaise 9x24pitching machine (dp 600)pitching machine (dp 700)pitching machine (dp 800)dry (poker) with steel handle awl (poken) of wooden handlechart paper thickdrawing sheet a3 sizeeraser/eraser (10pc)pencil (10pc)sharpener (10pc)pay-post registerfee posting registerscale plastic 12 inchscale steel 12 inch clear papergum labelgum tube 18 mlmuster rajkitner medium sizefogistic 8.15gmfevicol 25,50 100.200mlp.l. formabsence sheet form no. 100envelope a size laminatedenvelope a size mesh clothenvelope a size laggedenvelope f size mesh clothlikshat 94 size plainenvelope 11x5 size plainenvelope 10x12 size plainenvelope 15x12 size plainenvelope 9x4 size laminatedenvelope 11x5 size laminatedenvelope 10x12 size laminatedenvelope 15x12 size laggedenvelope 9x4 size mesh clothenvelope 10x12 size mesh clothenvelope 11x5 size mesh clothenvelope 15x12 size mesh clothtravel registerpaper counting spongewhite bhimbatti big size (15.10pc pkt)colorful bhimbatti big size (150pc pkt) etc

Central Government/Public Sector

TRN :34426922 | 10 May, 2025

Tender Value : 0

Hapur - Uttar Pradesh

Tender for gem bids for item category/???? ???????????? envelope yellow , envelope yellow a 4 size , register opd 300 page a4 size , medicine stock book 100 pg , medicine stock book 200 pg , medicine stock book 400 pg , medicine stock book 600 pg , kapoor balls packet , latrine brush , pauchha large , pauchha small , guard file , gucchi tag , scale plastic 12 inch , gum botle 500 ml , lock small 32-38mm , lock medium 67mm 10cm , lock large 77 mm- 12 cm , register 2q. , register 4q. , register 6q. , pilot pen , ball pen blue red black , calculator branded 12 digit 150 steps , calculator branded 14 digit 300 steps , stepler small 10-1m , small stepler pin , stepler big , stepler big pin , stamp pad , fevicol 25 gm liquid , fevicol 50 gm liquid , fluid correctioner , attandance register a 3 size good quality of reputed company , log book generator , log book vehicle , white paper a4 size , white paper legal size , white paper a3 size , cobra file , index file , punching machine 6mm , writtng pad 20 page , all pin , pin cushion , my clear bag a3 size , l folder transparant , gel pen , scale steel , highlighter all colours , all pin plastic head , carbon paper 100 sheets boxex , fevi stick 15 gm , fevi stick 25 gm , pad clip plastic , paper tag , paper form good quality of reputed company , nameplatemetal12inch6 inch , glossy paper photosheet 254gsm , chart paper good quality of reputed company , cello tape 36 mm , white board marker , scissor 6 inch , scissor 12 inch, heavy, iron made , suja, heavy steel , paper weight glass made transparent square , whitechildrenchalk box , file cover with printed cmo hapur , kodak file good quality of reputed company , dak pad , board pin , t head pin , brown tape , white board in square feet, heavy angle , notice board in square feet, heavy angle , stamp pad ink , jute bag 35cm h, 30cm w, 10cm d , pen drive - 4 gb , pen drive - 8 gb , pen drive - 16 gb , usb connective wire , one side usb second side c port type connecting wire , pitthu bag medium size , office table top

Central Government/Public Sector

TRN :34405167 | 08 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for gem bids for register 4 qr , register 6 qr , register 8 qr , register 10 qr , register 12 qr , printed register 20 x 30 , envelope 11 x 5 , envelope 9 x 4 , envelope a4 , envelope file size , envelope white , envelope with cloth 16 x 18 , a4 paper , fs paper , bond paper fs , bond paper , duplicating paper , carbon paper , glossy paper , add gel pen , add gel refill , pen v5 and v7 , uniball micro pen , uniball impact pen , uniball impact refill , pen reynolds , reynolds pen refill , cd marker pen , board marker pen , permanent board marker pen , sketch pen , cartridge 12 a , pen stand , pencil , sharpener , eraser , whitener , cello tape 1 inch , cello tape half inch , cello tape 2 inch , brown tape 2 inch , colour tape , tape despenser , binder clip 25 mm , binder clip 32 mm , index folder , dak folder , lather dak folder , plastic folder , file cover , white file cover , file binder , car diary , do letter , colour flag , sticky pad , post it note , drawing sheet , fevicol , glue stick , gum tube , highlighter , ink bottle half ltr , ink pad , lamination roll , note pad , paper cutter , paper cutter blade , paper pin , pin cushion , paper pin box , paper weight , u clip , poker , punching machine , scale steel , scissors , seal lakh , pencil cell , sponge , stapler large , stapler small , stapler pin large , stapler pin small , calculator , clip board , tag cotton , tag large , talc sheet

Central Government And Public Sector

TRN :34406424 | 13 May, 2025

Tender Value : 0

Kota - Rajasthan

Tender for gem bids for hub of l 150 jaw coupling make rathi lovejoy , spider of l 150 jaw coupling, make rathi , t cushion nitrile rubber of swq 276 l 140 coupling, make rathi lovejoy, one set is 6 nos of t cushion , snap wrap ring of swq 276 l 140 coupling. outside ring with screws. make rathi lovejoy , single adaptor hub of swq 276 l 140 coupling, make rathi lovejoy , set of bolts per side hex head screw of swq 276 l 140 coupling, make rathi lovejoy,one set is 6 nos of bolts , set of pin and nut and rubber bush of rb 105 3 coupling, make rathi lovejoy, one set is 3 nos , hub bush half of rb 105 3 coupling, make rathi lovejoy , hub pin half of rb 105 3 coupling, make rathi lovejoy , set of pin and cone ring and nut of rc 048 coupling, make rathi lovejoy, one set is 6 nos , hub bush half of rc 048 coupling, make rathi lovejoy , hub pin half of rc 048 coupling, make rathi lovejoy , set of pin and nut and rubber bush of rb 198 10 coupling, make rathi lovejoy one set is 10 nos , hub bush half of rb 198 10 coupling, make rathi lovejoy , hub pin half of rb 198 10 coupling, make rathi lovejoy , set of pin and nut and rubber bush of rb 144 6 coupling. make rathi lovejoy, one set is 6 nos , hub bush half of rb 144 6 coupling, make rathi lovejoy , hub pin half of rb 144 6 coupling, make rathi lovejoy

Local Bodies

TRN :48606691 | 15 May, 2025

Tender Value : 56.65 Crore

Prayagraj - Uttar Pradesh

Tender for tender for kareli - nurulla road to askari market road block c and block d housing scheme and nurulla road from mahavir chauraha to karamat ki chowki near sasur khedari river and also till the connecting road - clearing grass and removal of rubbish upto a distance of 30 m outside the periphery of the area as per technical specification clause 201. 3 dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 60 metres as per instructions of e-i-c. (by mechanical means). 4 i) cement concrete 5 ii) reinforced cement concrete/ r.b. 6 dismantling of flexible pavements and disposal of dismantled material up to a lead of 100 m, stacking serviceable and unserviceable materials separately as per technical specification clause 202. bituminous / granular courses (by mechanical means) 7 dismantling of road gully chamber of various sizes including c.i. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 8 removing all type of hume pipes and stacking within a lead of 1000 metres including t&p, earthwork and dismantling of masonry works. 9 (i) up to 600 mm dia 10 removal of telephone / electric poles / street light / lamp post including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately 11 disposal of moorum/building rubbish malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. note- item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. 12 dewatering using 10hp to 70hp diesel engine pump set including hire charges, cost of diesel, engine oil, pump operator, labor charges, conveyance of pump set and fuel to site and back, loading, unloading and any other incidental charges etc., complete. (hire charges for diesel pump set for 10 hp) 13 [b] bill no. 2 - earthworks 14 excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and leading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location within all lifts and lead upto 1000m 15 removal of unserviceable soil including excavation loading and disposal but excluding replacement by suitable soil which shall be paid separately as per clause 305 16 i) lead upto 1000 m 17 ii) lead upto 8000 m 18 earth work in excavation of foundation of structures as per drawing and technical specification, including setting out construction of shoring and bracing, removal of stumps and other deleterious matter dressing of sides and bottom, backfilling the excavation earth to the extent required and utilizing the remaining earth locally for road work. 19 mechanical means (depth upto 1.5 m) 20 i) excavation 21 filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 22 [c] bill no. 3 - development of carriageway 23 stabilization of in-situ (existing pavement crust) or soil or otherwise sub base/ base course up to the required depth by cold in-situ recycling using cement and chemical additives / otherwise: providing pulverizing, spreading, milling and mixing of chemical additives at the appropriate rate as per job mix design in accordance with irc-sp-72-2015 , irc-37-2012 & 2018 and irc sp 89 (part ii) 2018. cementitious additive @ rate of minimum 5 - 7% and ccs/cs additive should be spread on the existing pavement using a mobile truck mounted containerized cement/ additive spreader with micro processor controlled weighing and spreading system. the additive spreader shall have variable working width sufficient to cover whole pavement lane. the in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 m and with minimum engine horse power of 440 kw with a variable working depth up to 50 cm. the resultant stabilized mix then would be profiled to the required grade, level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth wheel roller to achieve desired proctor density as per irc 37-2012 & 2018 and complete in all respect and curing with water as required including all materials, labour and machinery etc. the entire in-situ process would be carried out in single pass with milling and pulverising of damaged asphalt pavement / soil/ aggregates / soil-aggregate mixture to the desired depth and with simultaneous addition of additives and water with machine integrated spray bars fited on the wheeled self-propelled and vibratory pad foot roller to achieve the desired proctor density in all respects. the tandem roller be followed by pneumatic tyre roller. the minimum unconfined compressive strength (ucs) of stabilized sub base/ base should be 4.5 to 7 mpa after 7 / 28 days of curing as per irc-sp- 72-2015 , irc-37-2012 & 2018 . also durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per irc 37-2012 & 2018 and irc sp 89 (part ii) 2018. the gradation mixes and materials should be as per irc 37-2012 & 2018 and irc sp 89 (part ii) 2018. the train of equipments to be used are binder spreader- water tanker- additive truck- recycler- padfoot roller (20 tonne) + single drum compactor- grader- tandom roller- pneumatic tyreroller (20 tonne) 24 sami layerproviding and laying stress absorbing membrane interlayer (sami)/bitumen impregnated geotextile layer after clearing of the road surface geotextile conforming to physical requirements of claues 703-3, laid over a tack coat of paving grade bitumen 80- 100 penetration, laid at the rate of 1.05 kg per sqm over thoroughly cleaned and repaired surface to provide a water resistance membrane and crack retarding layer paving fabric to be free of wrinkling and folding and to be laid before cooling of tack coat, brooming and rolling of surface with pneumatic roller to maximise paving fabric contact with pavement surface. 25 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (tack coat on bituminous surfaces ) 26 providing and laying 40mmthickbitumencarpete(b.c.) with 100-120 tph hot mix plant producing and average output of 75 tonege par hour using crushed aggregates of specified grading premixed with bitumen binder(vg-30) @ 5.40% of mix as per most specification clause. etc all comp of work. 27 providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from aggregat aggregate natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recommended proportions as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads as per direction of the engineer-in-charge; for the following grades of concrete.note: extra cement up to 10% of the minimum specified cement content in design mix shall. be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 28 m.s. (tor steel or plain) in plain work such as rcc or rb work including binding for proper shape and including supply of steel and its wastage bend, hooks and authorized overlapping shall be measured and including cost of binding wire. excluding gst (sor-504). 29 [d] bill no. 4 - pedestrian infrastructure (footpath) 30 sand filling in foundation trenches as per drawing & technical specification and as per direction of engineer-in-charge. (including beneath all paver blocks, cobble areas for levelling purpose, etc.) 31 plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (pcc below all paving area, kerb channel, road edge kerb, table top, property edge beam) 32 construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at omc, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (by mix in place method) 33 i) for grading-i material 34 plain/reinforced cement concrete in open foundation complete as per drawing and technical specifications, pcc grade m30using batching plant transit mixer & manual placing(80 mm thickness) r & manual placingand giving broom finish. (pcc with broom finish thickness 80 mm) 35 providing and laying 75mm thick m-30 grade batch mix cement concrete and applying stamping finish to the top surface of freshly laid plain/ reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per direction of the engineer-in-charge. the process shall include the following:-the concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. the approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. the approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. these stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the hole surface to be stamped is completed within the time while concrete is in plastic stage of setting.after stamping, the curing shall be done as per manufactures specifications. after initial curing the imprinted joints shall be grouted using cement slurry mixed with color hardener as per theequirement. the surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/sqm.on finished surface.the construction joints shall be provided by groove cutting of size 4mm x 20mm in panel size 3m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing and laying (pu) polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (cost of concrete for flooring is not included in this item which shall be paid separately.) 36 80 mm thick c.c. paver block of m-35 grade with approved color design and pattern. 37 supply and fixing of tactile indicators made from ss-304 grade stainless steel. warning tactile indicator shall be installed on the walking surface in a raised grid pattern of dots or stud. minimum 36 studs to be placed in 300x300 mm area. dimensions - 35mm outer dia x25mm inner dia, stem dia 8mmx12mm, weight - 28grm.all the indicator will be installed into correctly drilled holes and place any suitable adhesive, all the indicators shall be aligned property, all complete as per direction of engineer-in-charge. 38 supply & fixing of tactile indicators made from ss-304 grade stainless steel. directorial tactile indicator shall be installed on walking surface, consisting of a series of raised bar/strip. min 4 bars/strip to be placed in direction perpendicular to distance of travel in 300x300 mm area. dimensions-280mm l x 35mm w x 4.5mm, stem dia 8mmx12mm, weight - 250grm all the indicator will be installed into correctly drilled holes and place any suitable adhesive, all the indicators shall be aligned property., all complete as per direction of engineer-in-charge. 39 providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to is : 15622 of approved make in all colors and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of engineer-in-charge 40 chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (dsr-11.20) 41 providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of engineer-in-charge. (saucer drain along the road edge, curved kerbs at property entry/exit, curved kerbs at side roads) 42 providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of engineer-in-charge (length of finished kerb edging shall be measured for payment). (precast c.c. kerb stone shall be approved by engineer-in-charge). 43 cc grade m20 using batching plant transit mixer & manual placing all complete as per direction of e-i-c. 44 [e] bill no. 5 -parking 45 construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at omc, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (by mix in place method) 46 i) for grading-i material 47 supplying and filling in plinth with sand under floors/in trenches, including watering, ramming, consolidating and dressing all complete with material (from source to site), labor and t&p etc. required for proper completion of the work. (including royalty). 48 plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days and giving broom finish. (pcc) 49 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.80 mm thick c.c. paver block of m-35 grade with approved color design and pattern. 50 [f] bill no. 6 -cycle track 51 nil 52 [g] bill no. 7 - traffic signs, markings and other road appurtenances 53 providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow ms tube posts/horizontal members/bracings covered with 1.63mm thick ms sheet. the sheet shall be fixed with 30x5mm ms flat by suitable welding/riveting. the panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. ms channel islc 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long ms angle 40x40x6mm bracing. suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. the work shall be executed as per drawing/direction of engineer-in-charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the engineer-in-charge. the barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. the barricading shall not be removed without prior approval of engineer[1]in-charge.(note :- one time payment shall be made for providing barricading from start of work till completion of work i/c shifting. the barricading provided shall remain to be the property of the contractor on completion of the work). 54 reflective raised pavement markers (cat eye/ road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrile) or hips (high-impact polystyrene) or acrylonitrile butadiene styrene (abs) or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4260. the reflective panels shall consist, of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lens face. lenses shall be moulded of methyl methacrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably ba 5+/.5 degree lo base and the area of each retro -reflecting surface shall not be less than 13.00 $q.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are, displaced , damaged . get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labor, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge, 55 rpm with shank 56 solar power road marker the solar studs shall be made of aluminum alloy and polycarbonate material which shall be absolutely weather resistant and strong enough to support to load of 13,635 kg tested in accordance with astm d4280. its color may be white, red, yellow, green or blue or combination as directed by the engineer. its water resistance shall meet the requirements of ip 65 in accordance with is: 12063:1987 category 2 for the protection against water ingress. the dimensions of solar studs shall not be less than 100 mm * 100 mm * 10 mm. it shall have super bright leds so as the provide long visibility from a distance of more than 800 m. its flashing rate shall not be less than 1 hz. its should be able to give the prescribed performance in the temperature range of -40 degree c to +55 degree c. its life shall be not less than 3 years. the rate shall include all material, labor, equipments, fabrication, transportation erection, installation and incidentals all complete as per direction of the engineer-in-charge 57 r.cc work (1:1.5:3) (m-20) with cement course sand &20mm the stone grit including all complete cement concrete with cement sand &20mm gauge stone grit with the proportion of (1:1.5:3)including all complete the work (morth ra-12.8 c, case-ii) 58 m.s. or iron work plain or tor for rcc work including cutting, bending, rivetting or welding etc. where necessary. excluding gst (s.i.no-504) 59 painting two coats on new concrete surfaces - painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces 60 m.s. or iron work of heavy sizes section such as trusses, built up gates, record racks, roof work, gates etc. including rivetting or welding where necessary. excluding gst (s.i.no-503) 61 painting of m.s. grill with enamul paint etc all complete work. (s.i. 15.15 new item no.) 62 providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t&p, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of engineer-in-charge and accordance with applicable specifications. 63 providing and fixing of retro- reflectorized cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting type-ivvide clause 801.3, 2mm thick aluminum sheeting, 1.5 mm thick supported on mild steel angle iron post 75mm* 75mm 6mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45cm 45cm60 cm, 60 cm below ground level as per the approved drawing. the retroreflective sheeting shall be tested for a certificate of having the sheeting coefficient of retro reflection, daytime, color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoors weathering and its having passed these tests shall be obtained from international/ government laboratory/ institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should be also obtained from indian condition within 3 years of launching ofproduct by the manufacturing abroad. alternatively, a certificate conforming to astm specification (d4956-09) on artificial accelerated weathering requirement from a reputed laboratory in india can be accepted provisionally. in such a situation , the employer/client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of 3 years outdoor weathering of the sheeting as per irc 67:2012 . legends, letters, numerals, and borders etc. should be as per mort&h specification 801.3.7. proof of the same in form of government reports shall be uploaded while quoting tender. 64 90 cm equilateral triangle with diffinitation plate size (20cm x 60 cm) 65 60 cm equilateral triangle with diffinitation plate size (20cm x 60 cm) 66 60 cm circular with diffinitation plate size (20cm x 60 cm) 67 80mm x 60mm rectangularwith diffinitation plate size (20cm x 60 cm) 68 60 mm x 45 mm rectangularwith diffinitationplate size (20cm x 60 cm) 69 60cm x 60cm square with diffinitation plate size (20cm x 60 cm) 70 90 cm high octagon 71 direction and place identification signs up to 0.90 sqm size board providing and erecting direction and place identification retro-reflectorized sign as per irc-67 made of high intensity grade sheeting the retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international/government laboratory/ institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad. alternatively, a certificate conforming to astm specification (d4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally. in such a situation, the employer/ client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67:2012. legends, letters, numerals and borders etc. should be as per mort&h specification no-801.3.7. sheet fixed over aluminum sheeting 2 mm thick with area not exceeding 0.9 sqm. supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with m-15 grade cement concrete 45x45x60cm., below ground level as per approved drawing, complete. 72 direction and place identification signs with size more than 0.90 sqm size boardproviding and erecting direction and place identification retro-reflectorized sign as per irc-67 made of high intensity grade sheeting the retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility. liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international/government laboratory/ institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad. alternatively, a certificate conforming to astm specification (d4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally. in such a situation, the employer/client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67:2012. legends, letters, numerals and borders etc. should be as per mort&h specification no-801.3.7. sheet fixed over aluminum sheeting 2 mm thick with area exceeding 0.9 sqm. supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with m-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing, complete. 73 providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans & as per irc :67 74 brick masonry work in cement mortar 1:4 (1cement: 4 coarse sand) in foundation complete with cement concrete bricks procured from c&d waste recycling plant baswar excluding pointing and plastering, as per drawing and technical specifications. 75 struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 finerness modulus.sor 2022 si no574 76 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement :3 sand)and as per direction of engineer in charge. 77 finishing walls with ready mixed premium acrylic emulsion paint (company depot tinted) having volatile organic compound (voc)less than 50 gm/liter and uv resistance as per is 15489:2004, alkali, & fungal resistance, dirt resistance exterior paint of required shade with silicon additive(for painting wall, street furniture) new work (two or more coats applied @1.43 liter/10sqm over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm) 78 supplying and fixing of cast iron antique style bench having weight of sides not less than 72 kg (36 kg each) fitted with fibre rectangle strip (should not be less than 50 mm x 25 mm and 1.6mm thick. length of bench should not be less than 6 ft (end to end of castiron support). 79 [h] bill no. 8 - utility and street light cabling 80 plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.(pcc below pipe of storm water, sewer, water, inspection chamber for storm water, telecom chamber, power chamber and sewer) 81 providing and laying non pressure np-3 class (medium duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete (storm water, sewer) 82 600 mm dia rcc pipes 83 providing of 7- way 40mm multi ducts with solid permanently solidly lubricated silicone in inner layer for ict fiber cables conforming to astm f 2160, astm d 2444 and /or equivalent indian standard. external sheathshall be in orange colorand shall be free from visual defects like blisters, shrink holes,flaking, scratches, groove lines & surface roughness. the color of the 7 nos. plb hdpe ducts shall be green, blue, yellow, brown, violet, grey , red for differentiation. outer sheet thicknessshall be 1.2mm +/-0.2mm. the inner surface of the multi channel ducts shall be spirally ribbed & shall be of a configuration for faster installation of cables. wall thickness(mm) of each of the ducts excluding rib height shall be 2.9mm +/- 0.3mm. iso requirements- iso 9001, 14001, 18001, complete as per specifications and directions of engineer-in-charge. (7 way multi utility duct for ofc) 84 supply of hdpe pipe of size 110mm for distribution system conformingn to latest/ relevant i.s. 4984/1995 specifications with all jointing materials and specials conforming to latest /relevant i.s. specifications including f.o.r. destination and all taxes and insurance etc. with loading, unloading and carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of engineer-in-charge.110mm dia hdpe pipe pn-6 class pe-100 85 supply of hdpe pipe of size 63mm for distribution system conformingn to latest/ relevant i.s. 4984/1995 specifications with all jointing materials and specials conforming to latest /relevant i.s. specifications including f.o.r. destination and all taxes and insurance etc. with loading, unloading and carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of engineer-in-charge.63mm dia hdpe pipe pn-6 class pe-100 86 rcc grade m20 using batching plant transit mixer & manual placing ( side wall, bottom slab for all inspection chamber i.e. storm water, telecom, power, sewer, water) 87 supply and installation on site - recessed double seal ofwith a clear opening of750750 mm di manhole cover and frame(material- ductile iron grade 500/7) of class b125 having minimum load capacity 125 kn load as per en124-2, the top cover( should have 2 no. of keyholes ) as per the design approved by engineer in chargedesign approved by engineer in charge. 88 supply and installation on site - recessed double seal ofwith a clear opening of750750 mm di manhole cover and frame(material- ductile iron grade 500/7) of class d400 having minimum load capacity 400 kn load as per en124-2, the top cover( should have 2 no. of keyholes ) as per the design approved by engineer in chargedesign approved by engineer in charge. (storm water) 89 supply and fixing gully grates red 048 grh – 300 750mm d.i. gully grate & frame in d400 load class , as per bs en 124 black bitumen paint, all complete as per direction of engineer-in-charge. 90 constructing rcc rectangular type manholewith a floating coat of neat cement, foundation concrete 1:6:12mix (1 cement : 6 coarse sand : 12 graded brick bats 40 mm nominal size), and making necessary channel in cement concrete of m-25 grade finished with a floating coat of neat cement, all complete as per standard design and instruction of e-i-c. 91 restoration of water pipeline in case of damage 92 [i] bill no. 9 - horticulture / landscaping works 93 trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications. 94 supplying and stacking of good earth at site including royalty but including carriage1km (earth measusred in stacks will be reduced by 20% for payment). 95 supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment) 96 mixing earth and manure in specified proportion or as directed. 97 rough dressing the trenched ground including breaking the clods. 98 fine dressing the ground 99 spreading ofmixed good earth and manure in specified proportions as above and in required thickness. 100 uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation. 101 providing & laying selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge 102 preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of officer-in-charge. 103 excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete. 104 providing and stacking of nauclea cadamba (kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. 105 providing and stacking of nyctanthes arbor-tristis (hasingar) of ht. 90-105 cm in earthen pots of size 20 cm as per direction of the officer-in-charge. 106 providing and stacking of terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. 107 providing and stacking of plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size hdpe bags as per direction of the officer-in-charge. 108 providing and stacking of plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size hdpe bags as per direction of the officer-in-charge. 109 providing and stacking of ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge.. 110 providing and stacking of ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.. 111 providing and stacking of duranta golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of earthen pot/plastic pot & as per direction of the officer-in-charge.. 112 providing and stacking of tradescantia zebrina having in 15 cm size of earthen pot/plastic pot & as per direction of the officer-in-charge. 113 providing and stacking of wedelia trilobata,full of leaves in 15 cm size ofpoly bags & as per direction of the officer-in-charge. 114 providing and stacking of asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of earthen pot / plastic pot & as per direction of the officer-in-charge.. 115 providing and stacking of ophiopogon jaburan ( variegated ), full of variegated leaves in earthen pot/plastic pot of size 20 cm. as per direction of the officer-in-charge. 116 providing and displaying of croton petra bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of earthen pot/plastic pot & as per direction of the officer-in-charge. 117 providing and fixing ms iron tree guard 60 cm dia and 2 metre high above ground level formed of 4 nos (25 x 6 mm) and 8 nos (25 x 3 mm) vertical ms riveted to 3 nos (25 x 6 mm) iron rings in two halves, bolted together with 8 mm dia and 30 mm long bolts including painting two coats with paint of approved brand over a coat of priming, complete in all respects. 118 street light works (excluding gst) 119 supply & fixing of 9 mtr gi octagonal pole of approved make (top dia 70mm, bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 mtr length) on rcc foundation including the cost of foundation, foundation bolts, excavation & back filling and required t&p complete in all respect 120 supply and fixing of led street light fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 watt. confirming to ip 66 protection complete in all respect. cat: aaa 121 supply and laying of 16 sq.mm. 4 core aluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 122 supplying and laying 6 swg g.i. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with gi thimble etc. as required. 123 supply and burring of safe earthing electrode t-39 (hot-dip galvanized), length up to 3000mm, outer pipe 76mm inner dia38mm terminal dia 12 mm ,outer gipipe of 16 swg and inner gi pipe of 12 swg withhot dip galvanization up to 100 micron filled with crystalline conductive mixture (ccm) having anti corrosive & conductive property with 50 kgs activated soil (bfc) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square c.i. frame with hinged cover & masonary housing. (from electrode terminal to switch board, cost of 25 x 3 gi. strip will be extra) make: as approved in u.p. p.w.d., & c.p.r.i. certified. 124 making connection of each street light by s/l 1.5 sqmm frlsh copper wire complete as per direction of engineer in charge. 125 supply & fixing of 9 mtr gi octagonal pole of approved make (top dia 70mm, bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with double arm bracket (1 mtr length each ) on rcc foundationincluding the cost of foundation, foundation bolts, excavation & back filling and required t&p completee in all respect. 126 supply & laying of 63 mm dia (od-63 mm & id- 51 mm nominal) dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers, etc. conforming to is 14930, part ii complete with fitting and cutting, jointing, etc. direct in ground (75 cm below ground level) including excavation & refilling the trench but excluding sand cushioning & protective covering etc, complete as required. 127 supply and fixing for automatic street light cubical control juction box painted with anti-corrosive alkali and acid proof pait consisting of 6 amps mcb (b - curve) complete in all respect 128 supply and fixing of 16 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the engineer-incharge. 129 supply and fixing of 40 amp. capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn, complete in all respect. 130 supply and laying of 32 mm x 6 mm g.i. strip from earth electrode directly in the ground as required complete in all respect. 131 supply/ erection of surface mounted decorative pole 4500 mm long having base plate 300x300x12 mm with the bottom dia 139 mm upto 1 mtr long with the thickness of 3.6 mm and the top dia is 76 mm upto 3.5 mtr. log. decorative pole made out of galvanized iron tube with cast aluminium embellishments. the poles are painted with polyturetnane paint. the pole have service window at the bottom on the pole for housing the mcb and terminal strips and as per attached drawings. 132 s/f of single arm decorative bracket 100 mm long made of cast iron/ aluminium embellishments painted with polyturetnane paint. 133 supply of led decorative drop down light made of aluminium housing fitted with polycarbonate diffuser having 500 mm dia with 70 w. 134 supplyandlayingof aluminiumconductorpvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core 135 supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn, complete in all respect. 40 a tpn 136 supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the engineer-incharge. 16 sq. mm 137 supply & laying of 63 mm dia (od-63 mm & id- 51 mm nominal) dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers, etc. conforming to is 14930, part ii complete with fitting and cutting, jointing, etc. direct in ground (75 cm below ground level) including excavation & refilling the trench but excluding sand cushioning & protective covering etc, complete as required. 138 supply and laying 6 swg g.i. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with gi thimble etc. as required. 139 supply and burring of safe earthing electrode t-39 (hot-dip galvanized), length up to 3000mm, outer pipe 76mm inner dia38mm terminal dia 12 mm ,outer gipipe of 16 swg and inner gi pipe of 12 swg withhot dip galvanization up to 100 micron filled with crystalline conductive mixture (ccm) having anti corrosive & conductive property with 50 kgs activated soil (bfc) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square c.i. frame with hinged cover & masonary housing. (from electrode terminal to switch board, cost of 25 x 3 gi. strip will be extra) make: as approved in u.p. p.w.d., & c.p.r.i. certified. 140 part - b utility shifting (including gst) 141 converstion of lt overhead line by underground lt line 142 lt xlpe insulated cable of size 3.5x400 sqmm. 143 lt xlpe insulated cable of size 3.5x240 sqmm. 144 lt xlpe insulated cable of size 3.5x150 sqmm. 145 lt xlpe insulated cable of size 3.5x70 sqmm. 146 9 mtr long stp 147 hdpe pipe 140mm dia peb0, pn-6 148 hdpe pipe 120 mm dia peb0, pn-6 149 hdpe pipe 75 mm dia p880, pn-6 150 aluminium crimping lugs 400sqmm 151 aluminium crimping lugs 240sqmm 152 aluminium crimping lugs 150sqmm 153 aluminium crimping lugs 70sqmm 154 6 swg g.l. wire for earthing along cables. 155 cable end termination using total double compression brass glands and crimping type cu. thimbles for 3.5x400 sqmm. lt cable 156 cable end termination using total double compression brass glands and crimping type cu. thimbles for 3.5x240 sqmm. lt cable 157 cable end termination using total double compression brass glands and crimping type cu. thimbles for 3.5x150 sqmm. lt cable 158 cable end termination using total double compression brass glands and crimping type cu. thimbles for 3.5x70 sqmm. lt cable 159 main lt panel at sub station- 400 kva (type a-2)lncomer- 1 set of 800 amp. tp mccb with spreader & extended handlemetering on lncomer - 1 set of digital ammeter with ass- 1 set of digatal voltmeter with vss- 1 set of led type phase lndicating light (22.5 mm.)with control mcbsoutgoing- 6 set of 250 amp. tp mccb with spreader & extended handte( 5 nos. + 1 no. for capacitor panel)- 2 set of 100 amp. tp mccb with spreader & extended handle 160 main lt panel at sub statton- 250 kva (type a-2) lncomer- 1 no. 630 amp. tp mdo acb with inbuilt mpr release with i ontoff tnai.ating lightmetering on lncomer - 1 set of digital ammeter with ass- i set oldigital volt-meler wirh vss- 1 set of led type phase indicating light (22.5 mm.j with control mcbs outgoing - 5 set of 250 amp. tp mccb with spreader & exrended handle- 2 set of 100 amp. tp mccb with spreader & extended handle flnstallation oflt distribution boards for lt underground system (type a,b&cj) 161 supply , installation, testing & commissioning of outdoor type feeder pillar panetto be made of 2 mm crca sheet and covers will be j.6mm crca sheet dulypowder coated paint with 300 amps al. busbar. (type-b2)lncomer - 250 amp. tp mccb - 1 no.outgoing - 63 amp. tp mccb - 5 nos.lnstallation of lt distribution boards forlt underground system (type-a, b & c) 162 outdoor type feeder pillar panel to be made of 2 mm crca sheet and covers will be 1.6mm crca sheet duly powder coated paint with 300 amps al. busbar. [type-b3] incomer - 100 amp. tp mccb - 1 no. outgoing - 63 amp. tp mccb - 4 nos.lnstallation of lt distribution boards for lt qnderground system [tvpe-a, b & cl 163 lockable distribution boxes of size 450x400mm with bus bar 100 amp. tpn to feed upto 10 houses (type c) 164 xlpe lt service armoured cable for single phase,2x6 sq. mm.(pvc armoured consumer service cablel 165 xlpe lt service armoured cable for single phase,2x10 sq. mm.(pvc armoured consumer service cablej 166 xlpe lt service armoured cable for three phase,4x10 sq. mm.[pvc armoured consumer service cablel 167 xlpe lt service armoured cable for three phase,4x1.6 sq. mm.(pvc armoured consumer service cablel 168 xlpe lt service armoured cable for three phase,4x25 sq. mm.(pvc armou[ed consumer service cable) 169 pvc pipe 32 mm dia 170 pvc pipe 50 mm dia 171 electronic kwh meter 1px2w with box. for single phase consumer 172 electronic kwh meter 3px4w static meter with box.for three phase consumer 173 carriage , laying of 3.5cx400 sq.mm size lt xlpe insulated cable underground in hdpe pipe size 140 mm dia. 174 carriage, laying of 3.5cx150/240 sq.mm size lt xlpe insulated cable underground in hdpe pipe size 1.20 mm dia. 175 carriage ,laying of 3.5cx70 sq.mm size lt xlpe insulated cable underground in hdpe pipe size 75mm dia. 176 painting of stp incuding paints [2 ltr red oxide and 2 ltr alluminum paint for each pole.l 177 grouting of st pole 178 cartage , erection and dismentling charges 22% of materials cost 179 conversion of 11kv overhead/underground line by 11kv line underground 180 11 kv cable size 3x185 sq.mm xlpe 181 stp 11m-is 410 sp-55 182 g.l pipe 4 dia 183 top channel 100x50x2240 mm 184 hdpe pipe 160 mm dia pe 80, pn-6 185 service clamp o/s 186 clamp for fixing pipe to pole 187 11 kv cable jointing kit size 3x185 sq.mm xlpe o/d 188 11 kv cable jointing kit size 3x185 sq.mm xlpe s/t 189 earthing complete. 190 m.s. nut & bolt with washer 191 bracing angle 65x65x6x2700 mm with clamp 192 stone pad 193 number plates with clamp 194 danger board & clamp with bolts & nuts 195 stay complete 196 g i barbed wire 197 carriage , layrng of 3x185 sq.mm size 11 kv xlpe insulated cable underground in hdpe pipe dia 160 mm. 198 painting of stp incuding paints (2 itr red oxide and z lt. allrn inrm pal,1t for each pole.) 199 grouting of st pole 200 grouting of stay set 201 cartage , erection and dismentling charges 22% of materials cost 202 conversion of 33kv overhead/ underground line by 33kv line underground 203 cable al. 3x300 sq.mm. xlpe 33 kv 204 stp 11m-is 410 sp-55 205 g.l pipe 6 dia 206 m.s.top channel 100x50x2240 mm 207 hdpe pipe 200 mm dia pe 80, pn-6 208 service clamp o/s 209 clamp for fixing pipe to pole 210 bracing angle 65x65x6x4300 mm with clamp 211 33 kv cable jointing kit 3x300 se mm outdoor 212 33 kv cable jointing kit 3x300 se mm straight through 213 earthing of pole by ms earthing rod of 2ox25o0 mm & 6 swg earthr.ng wire etc. 214 m.s. nut & bolt with washer 215 number plates with clamp 216 danger board & clamp with bolts & nuts 217 stay complete (stay rod 15x1800mm, stay wire 5 kg,, stay clamp, boult & nut rvith grouting 218 daner bqard barbed wire includin jumpering 219 carriage , layrng of 3x300 sq.mm size 33 kv xlpe insulated cable underground in hdpe pipe dia 200 mm. 220 painting of stp incuding paints (2 itr red oxide and z lt. allrn inrm pal,1t for each pole.) 221 grouting of st pole 222 grouting of stay set 223 cartage , erection and dismentling charges 22% of materials cost 224 installation of 250 kva transformer on dp for the shifting of 3 no. 250 kva. 9 no.400 kva & 3 no. 630 kva transformer 225 stp 11m-is 410 sp-55 226 ms channel 100x50x2240 mm 227 service clamp for round pole 228 m.s. bolt and nuts off size with washer 229 l.t. cable 3.5ox4oo so m 230 ltxlpe insulated,unarmoured aluminium singlc corc cable,1x240sq. mm.sizc 231 lt xlpe insulatcd,unarmoured aluminium singlc core cablc,1x400 sq. mm.size 232 earthing of 250 kva t/f with g.i. pip[ 233 earthing rod complet. 234 1 1 kv d.o. fi]se sets 235 1 1 kv tpmo 236 d.d. wire 70 qs mm 237 250 kva t/f 238 l.t. cubical b0x complete 239 l,t. cable 3.50x240 sq mm 240 stay set complete, 241 aluminimum lug 70 sqmm 242 aluminimum lug 240 sqmm 243 aluminimum lug 400 sqmm 244 pvc tape 245 t/f bushing connector of copper strip 246 labour , cartage & errection charges and dismentaling of existing t/f 247 dismentling and cartage from site to store charges 7% (other misclenous charges)

State Government

TRN :49020391 | 20 Jun, 2025

Tender Value : 0

Panaji - Goa

Tender for tender for expression of interest tender for national games sports equipment on rental basis-aquatics sports equipment 2 osb 9 starting platform equipped with false start detection system and early start detecting device with no springing effect having a non slip surface of 0.5 x 0.5 meter backstroke hand grip at 0.6 above water level with complete mounting material ready to use confirming to fina , sfi regulations of make anti / mryta 3 floating goal post as per fina specification of make malmsten / anti 4 anti-wave lanes 50 mts long of make anti / mryt 5 backstroke ledge for start of make finis 6 ball cage for 10 balls of make indian 7 ball releasing mechanism of make indian 8 athletics sports equipment 9 assorted rake (with 1.50m handle) (60cm x 20cm) of make nelco 10 cross bar stands (high jump) to hold 6 cross bars of make nelco 11 cross bar stands (pole vault) to hold 6 cross bars of make nelco 12 cutting player of make indigeneous 13 discus 1 kg steel or brass rim for competition (wa approved) minimum 3 brands of make nelco 14 discus 2 kg steel or brass rim for competition (wa approved) minimum 3 brands of make nelco 15 discus stand (20 discus in one stand) of make nelco 16 folding stool (umpires & lap scorers) of make standard 17 hammer 4.00 kg dia turned brass / iron / alloy for competition (wa approved) minimum 3 brands of make nelco 18 hammer 500 gm ms (for fixing nails) of make standard 19 hammer 7.260 kg dia turned brass/ iron/ alloy for competition (wa approved) minimum 3 brands of make nelco 20 hammer cage with door & net (as per wa rule) of make nelco 21 hammer extra wire and handle - men (wa approved) of make nelco 22 hammer extra wire and handle - women (wa approved) of make nelco 23 hammer stand (12 hammers in one stand) of make nelco 24 high jump fiber cross bar (4m) (wa approved) of make nelco 25 high jump height measuring rod - 0.00m to 2.50mof make nelco 26 high jump landing mattress with cover 6m x 4m x 0.70m of make nelco 27 high jump uprights aluminium telescopic of make nelco 28 hurdles - steeple chase including water jump 1 set (wa approved) of make nelco 29 hurdles automatic aluminium - competition (wa approved)of make ate 30 hurdles carrying trolly (20 hurdles in 1 trolly) of make standard 31 javelin 600 gm. 40m range for competition (wa approved) minimum 2 brandsof make nelco/ate 32 javelin 600 gm. 50m range for competition (wa approved) minimum 2 brandsof make nelco/ate 33 javelin 600 gm. 60m range for competition (wa approved) minimum 2 brands of make nelco/ate 34 javelin 600 gm. 70m range for competition (wa approved) minimum 2 brandsof make nelco/ate 35 javelin 600 gm. non range for competition (wa approved) minimum 2 brandsof make nelco/ate 36 javelin 800 gm. 60 m range for competition (wa approved) minimum 2 brandsof make nelco/ate 37 javelin 800 gm. 70 m range for competition (wa approved) minimum 2 brandsof make nelco/ate 38 javelin 800 gm. 80 m range forcompetition (wa approved) minimum 2 brandsof make nelco/ate 39 javelin 800 gm. 90 m range for competition (wa approved)minimum 2 brands of make nelco/ate 40 javelin 800 gm. non range for competition (wa approved) minimum 2 brandsof make nelco/ate 41 javelin stand (20 javelins in one stand) of make nelco 42 jumping mattress trolly 5m x 3m of make nelco 43 ladder for hammer retriving of make standard 44 pole rack (to hold 10 poles) of make nelco 45 pole vault box of make nelco 46 pole vault crow bar (bar lifter)4.0m long aliminium (telescopic) of make nelco 47 pole vault elastic cross bar of make nelco 48 pole vault fiber cross bar - 4.5m (wa approved) of make nelco 49 pole vault height measuring rod (0.00m to 5.50m) of make nelco 50 pole vault landing mattress (wa approved) of make nelco 51 pole vault uprights (wa approved) with base pair sets of make nelco 52 relay baton different colours with number 1 to 8 aluminium of make nelco 53 shot 4 kg of different dia from 95mm, 100mm, 105mm, 109mm and 110 mm for competition (tuned iron & alloy) minimum 2 brands wa approved of make nelco/ate 54 shot 7.260 kg different dia from 110mm, 115mm, 120mm, 125mm, 129mm, 130mm for competition (turned iron & alloy) minimum 2 brands wa approved of make nelco/ate 55 shot return channel 20m long of make nelco 56 shot stand (20 shots in stand) of make nelco 57 stand with bowl (mgco2/ gym chalk) of make nelco 58 starters stand of make nelco 59 starting blocks combatable with start information syatem wa approved of make nelco 60 starting blocks trolley (10 blocks in one trolly) of make nelco 61 concentric circle of make nelco 62 badminton sports equipment 63 hova courts of make yonex 64 umpire chair of make sanrit 65 basketball sports equipment 66 basketball trolley(to accommodate 15 balls) of make cosco 67 basketball trolley(to accommodate 8 balls) of make cosco 68 billiards & snooker sports equipment 69 sharma s1 snooker tables (12 x 6) with steel cushion long rest half rest spider rest goose neck rest cue extension chalk cues table cover iron ball spotter ball rack table brushes corner brusher of make sharma 70 boxing sports equipment 71 boxing ring (aibaapporved) of make greenhill 72 canoeing & kayaking sports equipment 73 kayak paddle 100% carbon graphite fiber available in ultra-light and stiff variant adjustable clamp on shaft with lock and unlock facility adjustable to 5 cm with a left and right angle protractor icf and ikca approvedof make braca iv 74 canoe paddle 100% carbon graphite fiber available in ultra-light and stiff variant adjustable clamp on shaft with lock and unlock facility adjustable to 5 cm with a left and right angle protractor icf and ikca approved of make braca iv 75 kayak ergometer length: 2.50 m - 3.10 m width: 0.40 m - 0.70 m height: 0.40 m - 0.70 m weight: 40 kg (approximate) povides easily readable, relevant numeric / graphic information to the athlete while training on the ergometer its display shows following updates: paddling time distance speed / power stroke rate / water-air ratio / max heart rate (requires serial interface to polar chest ribbon or similar) average speed / power graphic left / right power balance pacer icf and ikca approved of make dansprint aps 76 canoe ergometer length: 3.10 m - 3.30 m width: 0.40 m - 0.52 m height: 0.60 m - 0.70 m weight: 40 kg (approximate) povides easily readable, relevant numeric / graphic information to the athlete while training on the ergometer its display shows following updates: paddling time distance speed / power stroke rate / water-air ratio / max heart rate (requires serial interface to polar chest ribbon or similar) average speed / power graphic left / right power balance pacer icf and ikca approved of make dansprint aps 77 interval 2000 split / rate watch - stop watch included in the packages: - cr2032 batteries (2) - interval 2000 - interval protective bumper - lanyard memory: 2000 splits, best and average split, 600+ segments identified by date and time, stroke rate w/time unit weight: 2.2 oz (66.369 kg) display dimensions: 1.625 x 1.25 in buoyancy: floats (note: control unit with bumper and lanyard floats) display: high-contrast monochrome lcd backlight: blue/green electroluminescent backlight, auto-on controls: 5 buttons (3 side, 2 front), tactile and audible response. battery type: 2 cr2032 (1 display, 1 backlight) battery life expectancy: 300+ hours case: injection-molded polymer case, acrylic lensof make nielsen & kellerman 78 canoe knee pad made from lightweight and durable closed mini-cell foam that can be shaped for a custom fit and superior comfort icf and ikca approved of make braca iv 79 seats k1 icf and ikca approved of make nelo 80 seats k2 icf and ikca approved of make nelo 81 seats k4 icf and ikca approved of make nelo 82 foot rest k1 icf and ikca approved of make nelo 83 foot rest k2 icf and ikca approved of make nelo 84 foot rest k4 icf and ikca approved of make nelo 85 spare rudder k1 icf and ikca approved of make nelo 86 spare rudder k2 icf and ikca approved of make nelo 87 spare rudder k4 icf and ikca approved of make nelo 88 stop watch electronic with 100 memories included in the packages: - cr2032 batteries (2) - interval 2000 - interval protective bumper - lanyard memory: 2000 splits, best and average split, 600+ segments identified by date and time, stroke rate w/time unit weight: 2.2 oz (66.369 kg) display dimensions: 1.625 x 1.25 in buoyancy: floats (note: control unit with bumper and lanyard floats) display: high-contrast monochrome lcd backlight: blue/green electroluminescent backlight, auto-on controls: 5 buttons (3 side, 2 front), tactile and audible response. battery type: 2 cr2032 (1 display, 1 backlight) battery life expectancy: 300+ hours case: injection-molded polymer case, acrylic lens of make nielsen & kellerman 89 rope garware (in meter) of make nelo 90 balls (big size) of make nelo 91 life jackets ultra low olympic gold medal cut clever figure-hugging shoulder straps integrated side straps 50-70n of gaia environmentally friendly soft foam size available xs (weight: 30-50 kg) sm (weight: 45-70 kg) lxl (weight: 65-90 kg) xxl (weight: 85-110 kg) fl/xl (weight: 60-90 kg) icf and ikca approved of make hiko sports 92 slalom paddles 100% carbon, aluminium & titanium reinforced tips with adjustable shaft upto 5cm of make braca iv 93 spray deck canoe slalom blind stitched and latex sealed seams throughout. 10/11 mm shockcord style deck. 4/5 mm tough faced neoprene with silicone printed reinforcing on top. no seams in the deck section icf and ikca approved of make hiko sports 94 spray deck kayak slalom blind stitched and latex sealed seams throughout. 10/11 mm shockcord style deck. 4/5 mm tough faced neoprene with silicone printed reinforcing on top. no seams in the deck section icf and ikca approved of make hiko sports 95 helmet canoe slalom ultra lightweight competition helmet ideal for whitewater kayak / canoe racing, surf lifesaving, freestyle kayaking and rafting. construction material high impact ralvek thermoplastic for a stiffer, safer shell. the interior is a top grade closed cell eva foam liner. detachable fit pads give you a super comfortable custom fit without abosrbing moisture. low profile shell design foam vent inserts for cold water paddling interior impact liner is a low profileshell design, closed- cell waterproof eva foam weight 500 gms ce-1385 certified and icf approved for international and olympic layak / canoe racing icf and ikca approved of make hiko sports 96 life jackets canoe slalom ultra low olympic gold medal cut clever figure-hugging shoulder straps integrated side straps 50-70n of gaia environmentally friendly soft foam size available xs (weight: 30-50 kg) sm (weight: 45-70 kg) lxl (weight: 65-90 kg) xxl (weight: 85-110 kg) fl/xl (weight: 60-90 kg) icf and ikca approved of make hiko sports 97 jetties for canoe sprint material: high density polyethylene (hdpe), marlex hdpe 50100 / qtr 571 cube dimensions: 500mm x 500mm x 400mm higher holding strength - corrugated design sides to interlock cubes together for higher pressure resistance and strength in water & provision to pass cables or pipes under the cover top cover: separate cover made of marlex hdpe 50100 / qtr 571 with 20mm thick and antiskid design for extra strength & prevent wear & tear lug thickness: 22mm (+-5%)to ensure sufficient strength min. weight of cube with cover 8.5 kgs/cube (+-5%) buoyancy: 360 kgs/sq. mtr flat floor, floor stiffening with painted grip accessories and connectors: made of same hdpe material to avoid any frictional damages complete accessories, short pin, short screw & nuts, cleat, washer, required for constructing floating surface including rope ua radiation proof buoyancy test report qb 1557-1992 diagonal tensile strength test report gb/t 1040.1-2006 compressive strength test: gb/t 8813-2008 supply, installation and handover of project at site hdpe side railing, height 1000mm icf and ikca approved of make indigeous 98 k2 (not more than 18kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 650 cm weight: not more than18kg icf and ikca approved of make nelo 99 k4 (not more than 30kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 1100 cm weight: not more than30kg icf and ikca approved of make nelo 100 c1 (not more than 14kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 520 cm weight: not more than14kg icf and ikca approved of make nelo 101 c2 (not more than 20kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 650 cm weight: not more than20kg icf and ikca approved of make nelo 102 c4 (not more than 30kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 900 cm weight: not more than30kg icf and ikca approved of make nelo 103 judo sports equipment 104 judo mats for competition and warm up area (tatami) of make taishan 105 kabaddi sports equipment 106 synthetic kabaddi mats thickness 35-40 mm - total 1500 pieces for 4 courts (2 court for practice and 2 for fop) of make indigeous 107 kho kho sports equipment 108 kho-kho mats (30m x 20m) size:1m x1m . density:30 mm (approved/preferred by kfi) of make gravolite 109 kho-kho poles-sheesham ( height:120-125cms above the ground & 40-50cms below the ground, wooden circumference:9-10 cms at the top & 28.25-31.4 cm at bottom.) colour:white of make shiv naresh 110 mallakhamb sports equipment 111 pole mallakhamb for competition & warm up area above the ground 2600 to 2800 mm, under the ground 800 to 900 mm, neck 180 to 200 mm, top - 70 mm, total length 3400 - 3700 mm, circumference: bottom - 530-550 mm, below the neck 300 to 350 mm, neck 180 to 200 mm, top 350 mmof make kepl khalsa 112 hanging mallakhamb for competition & warm up area height 1700 to 1900 mm, neck height 180 to 200 mm, top height - 70 mm, distance b/w bottom and ground 650-700 mm, circumference: bottom 450 to 500 mm, neck 180 to 200 mm, below the neck 250 to 300 mmof make kepl khalsa 113 structure of hanging mallakhamb for competition & warm up area height of structure/stand - 4600 to 4800 mm, width - 12 feetof make kepl khalsa 114 structure of rope mallakhamb for competition & warm up area height of structure/stand - 5800 to 6000 mm, width - 12 feetof make kepl khalsa 115 powder stand 3 feet with steel tubeof make kepl khalsa 116 rubber foam mattresses for competition and warm up area length - 2 m, width - 1 m, thickness - 6 cm to 10 cmof make kepl khalsa 117 portable mallakhamb above the ground 2600 to 2800 mm, neck 200 mm, top - 70 mm, total length 3400 - 3700 mm, circumference: bottom - 530-550 mm, below the neck 300 to 350 mm, neck 180 to 200 mm, top 350 mmof make kepl khalsa 118 modern pentathlon 119 uipm laser pistols (shooting) (model - pp320exp laser pistol set)of make ecoaims 120 uipm laser target (shooting) (model - lt600 laser hit / miss target) of make ecoaims 121 fencing piste of make absolute fencing 122 fencing apparatus of make absolute fencing 123 pencak silat sports equipment 124 arena mattress (5 cm)(1 set of 92 green, 2 yellow, 3 red, 3 blue)of make indigenous 125 roll ball sports equipment 126 goalpost (size & design as per irbf guidelines) of make indigenous 127 rowing sports equipment 128 single scull boat imported (coastal boats) of make swift racing 129 double scull boat imported (coastal boats) of make swift racing 130 4 seat catamaran importedof make swift racing 131 catamaran obm 4 stroke 25hp of make rowing solutions 132 rugby sports equipment 133 rugby specific goal posts (set of 2 goal posts) 6 inch diameter, 20m height x 4 poles & 4 inch diameter, 6m height x 2 poles of make scrum 134 sqay martial arts sports equipment 135 arena of size 10 x 10 women (sqay arena mats) yellow & purple colour mats (total 100 pieces) of make haily 136 arena of size 12 x 12 men (sqay arena mats) yellow & purple colour mats (total 144 pieces)of make haily 137 table tennis sports equipment 138 table tennis tables - show court- black of make cosco 139 umpires tables of make cosco 140 taekwondo sports equipment 141 taekwondo mats (red & blue colour, 1m x 1m x 24mm thick, daedo or kwon or any wt approved mats) of make indigeous 142 weightlifting sports equipment 143 men bar with collar (warm up & training area) of make eleiko 144 women bar with collar (warm up & training area)of make eleiko 145 discs & plates (fop main stage) (1 set disc & plates in fop (main stage) will consist of 25 kg x 4, 20 kg x 2, 15 kg x 2, 10 kg x 2, 5 kg x 2, 2.5 kg x 2, 2 kg x 2, 1.5 kg x 2, 1 kg x 2, 0.5 kg x 2) of make eleiko 146 discs & plates (warm up & training area) (16 sets disc & plates inwarmup & training area will consist of 25 kg x 2, 20 kg x 2, 15 kg x 2, 10 kg x 2, 5 kg x 2, 2.5 kg x 2, 2 kg x 2, 1.5 kg x 2, 1 kg x 2, 0.5 kg x 2)of make eleiko 147 discs racks (warm up & training area)of make eleiko 148 powder standof make eleiko 149 resin trayof make eleiko 150 warmup & training platform(3 mts. x 3mts.)of make eleiko 151 wrestling sports equipment 152 wrestling mats of make taishan 153 wushu sports equipment 154 taolu arena of make taishan 155 for warm up area - kabaddi mats thickness 35mm,1m x 1m of make rxn 156 sanda arena of make taishan 157 for warm up area - judo mats thickness 40mm, 2m x 1m of make rxn 158 yachting sports equipment 159 rescue boats 4.5 meter rib (rigid inflatable boat), with 2000mm beam, 350mm draft (including appendages), 450mm dia. hypalon coated fabric collars of 1500gsm, 1670dtex material, with 5 airtight compartments, fitted with 40hp 4-stroke obm with manual tiller steering handle and capacity of 6 people. fuel capacity of 2 external tanks of 23-liter capacity each per boat cruising speed of 16 to 18 knots. the boat should be unsinkable when flooded and fully loaded and highly maneuverable, suiting rescue operations in seas.boat to be supplied with irs class certificate. accessories to be provided: 1no. boat repair kit, anchor with rope, 2 paddles, 1 set lifting slings. 1 bollard and 2 fairleads of make chougule fiberglass 160 jury boat 4700 mm long rib (rigid inflatable boat) with fiberglass hull, breadth of 2000mm, max draft of 450mm (including appendages), with 460mm dia. hypalon coated fabric of 1500gsm, 1670dtex, having 5 nos.foam-filled compartments, with single 60 hp 4-stroke obm fitted with remote control and steering system on a center console unit. fuel capacity of 2 external tanks of 23-liter capacity each per boat. cursing speed of 18-20 knot and a capacity of 6-8 people. the boat should be unsinkable when flooded and fully loaded and highly maneuverable.boat to be supplied with irs class certification. accessories to be provided: 1no. boat repair kit, anchor with rope, 2 paddles, 1 set lifting slings. 1 bollard and 2 fairleads of make chougule fiberglass

Related Searched Keywords : pin cushion

List of pin-cushion Tenders

Get pin cushion Tender Alert...

Related Searched Keywords : pin cushion

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us