Filters

List of pipe-drain Tenders

List of latest pipe-drain Tenders in Indian Tenders. Click on any pipe-drain Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for pipe-drain Tenders.

All-Tenders (126)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Local Bodies

TRN :49058227 | 14 May, 2025

Tender Value : 0

Ballia - Uttar Pradesh

Tender for tender for supply of brick, brick mortar, bhasmi, cement, coarse sand, local sand, fine sand, soil, stone, rebar, ballast, slab, sanitation kit. material, wall painting material, morang, solar light, street light, ro plant, high mast light, school bench, hand pump rebar material, saw plant, stationery, banner-poster, submersible and water supply material, all types and sizes of pipes for underground drain, hume pipe, stone dust, iron grill, iron pipe, asbestos sheet, tin shed, cement brick interlocking brick, cut stone, paint, gate door, tiles, hand pump material, pouring spirit, electrical material, snowsem rebar primer, distemper, plywood, kota stone, gsv, pvc pipe, wc, pen, boulder, toilet shed and related materials, rickshaw pullia, e rickshaw, csc installation work, hydraulic cart, shed (karkat), plastic bank installation work, dustbin. tender is invited for purchase of garbage container work and installation of female incinerator

Local Bodies

TRN :49059091 | 20 May, 2025

Tender Value : 5.80 Lacs

Varanasi - Uttar Pradesh

Tender for drainage work through pipe from ward no. 2, sikraulmo lashkar sunbeam school, varuna culvert to shyam sundars house

Central Government/Public Sector

TRN :49059370 | 30 May, 2025

Tender Value : 0

Cuddapath - Andhra Pradesh

Tender for supply of elgi make screw compressor spares , consumable spares list , air filter element , oil filter , element separator (e90-160) , minimum pressure valve kit , intake valve kit (e132-160) , coupling element e90-160 , blow down valve kit , pressure transmitter , temperature sensor , air inlet system , nc intake valve 4 inch hpkg-120 , ss t bolt clamp jt6a20-dia 170 , elbow; rubber 6” , indicator: air filter clog , drive coupling,dia 80/60 , a/e pkg gr:1.326 axis 284 , connector; pvc hose 3/4 , steel reinforced pvc hose 60mm , after and oil cooler assy-e-160 , base assembly-e160 , bracket - airend , vertical tank e132-e160 , hose-3 inch discharge , bracket air filter assy , filter head 360 lpm machining , dia 550 pusher fan 400v , oil return line assembly , exhaust fan 6 sq 220v , pressure regulator prne , ball valve 3 , hose set e90-e160 wc (4nos) , filter assy. -360 lpm , fan dia. 42 with hub ee160 , steel reinforce pvc hose 20mm gre , o/c &a/c assy ee160 alu.coler , tank rec e90-e160 horizone , pipe assy mpv hose to cool , hose assy mpv to cooler , pipe with elbow assy , hose assy 1 1/2 tv to oil out , hose assy tv to oil in , pipe with flange assy , pipe tee assy , hose with metallic bellow 32nb , hose assy airend to tank , hose assy 1 1/2 tank to tee , air end package 1.11: 1 , steel reinforce pvc hose 10mm gre , steel reinforce pvc hose 20mm gre , steel reinforce pvc hose 50mm gre , control system of modele90- e160 , hex reducing nipple 1/4”(m) x 1/8”(m) , pr regulator , tms elbow ¼”x ¼” (t) , tee pipe¼ ” , tms coupling ¼”x ¼” (t) , hex nipple ¼” , connector hose adapter ½” , hose ½” x 1000l (e132-160) , tube ¼”2 mts , spares for compressor of modele132- e160 , base & drive system , anti vibration mount - e132- e160 , cooling and lubrication system 90-160 wc , o ring 54.2 x 47.2 x 3.5 , element, therm valve 155 deg , elbow tms 1 ½” x 1 ½” , tee; pipe; ¼” npt , pr transmitter 16 bar, 4.20 ma , filter oil , oil filter indicator , nipple; hex; ¼” npt , seperator element 1200 cfm , gasket flange 2” for e160-8 bar , mpv with check valve -mpvl65 , pr. releif valve , plug, hex 1 ½” npt , oil sight glass , nipple ; pipe; ¾” npt x 300 , elbow tms ¼” x ¼” npt , transparent tube 8x6 1.2 , coupling; tms; 1/4”x1/8” npt , o ring id 80.0x2.5 thick , hex nipple , tee pipe , pressure switch 0.2-7.5 bar , pressure guage , spares for compressor of modele75-85 , consumable spares list , neuron ii , air filter element , oil filter , element seperator , minimum pressure valve kit , intake valve kit , pr. regulator , coupling drive (or) coupling element , pressure transmitter , temperature sensor , hose assy-a/e to tank , blowdown valve kit , actuator kit , oil sight tube6mmx 4mm - 0.5m , ferrule 6 mm , pipe sets dis sys e75-horizon , pipe assy mpv to hose , hose assy mpv to cooler , pipe assy ms to ball valve , discharge hose , hose oil line , fan assy 23 inch , air inlet & control system , 5/8” x m10 bush reducer , intake valve – nc , hex nipple¼” x 1/8 ”npt , pressure regulator , tee branch ¼” x ¼” npt , tubing 6mm 1.5m , coupling tms ¼” x 1/8” npt , connector ½” npt , ss t bolt clamp dia 170 , connector rubber 6” , rubber hose duct connector , ss t bolt clamp , elbow ½” npt , elbow tms ¼” x ¼” npt , temp sensor , discharge system , ¼” tms elbow , minimum pressure valve , water seperator , hose mpv out to ac , scavenging line pipe , tms elbow ¼” npt , ¼” tms elbow , pressure releif valve – 1” npt , o ring , hex reducing nipple , assy strainer , tms elbow , hose assy – 80 nb , hex plug – 1” npt , oil sight glass tube 0.5m , pipe nipple – ¾” npt , tube nylon 6x4 1.5m , ¼” tms elbow , seperator , pressure transmitter , cooling system , oil cooler &after coller assembly , fan motor 2 hp , lubrication system , elbow 1 ¼”x m42 , pipe tank to tv , tee branch 1 ¼“ npt , spin on filter , filter head , element thermal valve , housing thermal valve 1 ¼” npt , swivelelbow connector 1 ¼” npt , pms coupling 1 ¼” bsp x 1 ¼” od , swivelelbow connector 1 ½ ” bsp x 1” od , swivel banjo connector m27 x 2 , motor and base assembly system , coupling drive , anti vibration mount –motor , anti vibration mount –airend , recommended sparesfor e18-e22& & e30-e7.5 ac 415vfor horizon series kit of spares upto 2500 hrs of running , air filter element , oil filter , element seperator , insurance kit e11 elgi neuron ii plc , minimum pressure valve kit , 240v ac solenoid valve , pipe coupling style 12-1 ½” , ‘o’ -ring , blow down valve kit , coupling element rotex 48 , intake valve kit , auto drain valve assembly/ kit , pressure trasmitter , temperature sensor , nylon tubedia 10 x 8 , nylon tube dia 6 x 4 , recommended sparesfor e30-e37 & e18-7.5 nii plc for horizon series , air filter element , oil filter kit , element seperator , insurance kit (7,5,10 & 13 kgf/cm2) , minimum pressure valve kit , 240v ac solenoid valve , hose with metallic bellow 50nb , blow down valve kit , coupling element, rotex 48 , intake valve kit nc -3” , pressure transmitter , temperature sensor , nylon tube dia 10 x 8 , nylon tube dia 6 x 4 , recommended spares for ee110-14ac 415 with nii plc.. fab : bjfl100050 , glass oil sight 1 ½” npt , air filter assy-1200 cfm , sst bolt clamp jt6a20-dia 70 , solenoid valve 240vnc , hose pvc ¾” , connector pvc hose ¾” , tubings 6mm , sleeve for 6x4mm tube , neuron 11 controller , pr transmitter 16bar, 4.20ma , temp sensor 0-150 deg, kty 10 , o ring-62.5x55.5x3.5 , o ring id 80.0x2.5 thick , pipe assy mpv hose to cool , gasket intake valve to airend , hose assy 1/2x1000hose assy 1/2x1000 , strainer assembly , element therm valve 125deg , orifice 3/8” x 1/8” , gasket flex hose 2 ½” , gasket flex hose 3” 20s , elbow tms ¼” x ¼” npt , elbow tms ½”x1/4”npt , coupling tms ¼” x ¼” npt , coupling tms 3/8” x ¼” npt , pressure regulator prne , drive coupling e110-e132 4 pol , mpv with check valve mpv l65 , inc intake valve 4inch hpkg-120 , o/c & a/c assy ee160 alu cooler , pipe assy-dcv , gasket flange 2” asa b165 , element separator,2016ts hor , ther valve house m/c flg type , hose assembly oil outlet , hose flexible 3” nb e20 dpsac , elbow rubber 6” , hose assy oil outlet , hose assy oil outlet , cooling & lubrication system , intake valve assly , intake valve assly , minimum pressure valve(mpv) assy , minimum pressure valve(mpv) assy , blow down valve (bdv)assembly , thermal valve assly , 50 va transformer , nrv 1/2 , split cooler assembly , split cooler assembly , blow down valve kit , intake valve kit nc , model: e160- 8.( water cooled) , solenoid valve , anti vibration mount , gasket dcv pipe air end slide e160 , hose 3 discharge for e160 5.5 bar , hose 3 mpv toac , hose-1 1/4oil cooler out , hose -1 1/4 oil cooler in , adopter nut pressure switch , hose -1 1/4 oil ignition , flange assembly- tank o tv , o-ring, 54.2 x 47.2x 3.5 , bolt hex m12 x 45 8.8 z yp5-8m , housing, thermal val;ve m/c , hose1 1/4 oil injection , elbow 1 1/2 bsp , hose - 3 1/2 discharge fore160 , hose - 2 1/2 pmv to tankfor e160 , flange assembly - mpv to tank , pipe nipple - 3 npt , transparent tube 8x6 , hex nipple orifice e160 , solenoid valve , hose 1/2 x 1000l , tube 1/4 , control panel e160, wc, 400v- sfu , plc controller set , shroud-exhaust fan

State Government

TRN :49059396 | 16 May, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for tender for urgent replacement of damaged pcb board, refrigerant gas chagrining, drain pipe replacement, shifting and reinstallation of different split type ac at different floors of a/b/c block of new secretariat building, kolkata-700001 (job no.-ns/rw/04 of 25-26) .

Local Bodies

TRN :49061876 | 15 May, 2025

Tender Value : 0

Prayagraj - Uttar Pradesh

Tender for tender for supply of materials for schemes/programs like construction of public toilets etc., construction and repair of drains, construction and repair of ditches, renovation of wells, repair/reboring/installation of india mark-2 hand pumps and construction and repair of platforms, construction of soak pits, interlocking work, supply of materials used in construction of mdm sheds, led electric bulbs, solar/street lights, water tanker, construction/repair of boundary wall, hume pipe, construction of school/panchayat bhawan and anganwadi centre and painting of windows/doors etc./ bleaching powder, sanitizer mask, fogging machine, foot sprayer/power sprayer/cleaning worker kit and other equipment for protection against covid-19 and supply of materials and project board used in this work.

State Government

TRN :49061881 | 16 May, 2025

Tender Value : 0

Prayagraj - Uttar Pradesh

Tender for tender for in village panchayat harakhpur, under state finance/ fifth state finance/ 15th finance commission/ mnrega/ national rural sanitation mission/ kayakalp yojana/ swachh bharat mission rural scheme/ public toilet construction etc. schemes/ programmes, construction and repair of drains, construction and repair of drains, renovation of well, repair/ reboring/ installation of india mark 2 hand pump and construction and repair of platform, construction of soak pit, interlocking work, supply of material used in mdm shed construction, led. electric bulbs, solar/street lights, water tanker, construction/repair of boundary wall, hume pipe, construction of school/panchayat building and anganwadi center and painting of windows/doors etc./ bleaching powder, sanitizer mask for protection against covid-19, fogging machine, foot sprayer/power sprayer/cleaning worker kit, other equipment and supply of material and project board used in this work

State Government

TRN :49062033 | 13 May, 2025

Tender Value : 2.34 Lacs

Paravur - Kerala

Tender for tender for pakarappally devaswom - paravur group - constructing toilet block-- 1 appendix i-constructing toilet block 2 earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 4 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) 5 centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete 6 solid block masonry using pre cast solid blocks (factory made) of size 30x20x15 cm or nearest available size confirming to is 2185 part i of 1979 for foundation and plinth with thickness 15cm in: cm 1:6 ( 1 cement :6 coarse sand) etc complete 7 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 8 steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth level thermo - mechanically treated bars of grade fe-500d or more 9 solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level with thickness 15cm in : cm 1:6 ( 1 cement : 6 coarse sand) etc complete 10 reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (zone iii) : 3 graded stone aggregate 20 mm nominal size). 11 centering and shuttering including strutting, etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers 12 steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 13 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 14 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.size of tile 600 x 600 mm. 15 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineerin-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 16 providing and fixing water closet squatting pan (indian type w.c. pan) with 100 mm sand cast iron p or s trap, 10 litter low level white p.v.c.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests 17 supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge. 18 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:w.c. pan with isi marked white solid plastic seat and lid 19 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china flat back wash basin size 550x400mm with single 15 mm c.p.brass pillar taps 20 finishing walls with acrylic smooth exterior paint of required shade:new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 21 supply and fixing pvc door with frame including locking arrangements as per the direction of engineer-in-charge 22 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to openings/ wooden frames with rawl plugs screws etc 23 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 24 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 25 providing and placing on terrace (at all floor levels) polyethylene water storage tank :isi 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 26 supplying and fixing cp health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 27 providing and fixing c.p brass bib cock of approved quality conforming to is: 8931.15 mm nominal bore 28 providing and fixing c.p. brass shower rose with 15 or 20 mm inlet:100 mm diameter 29 appendix ii-septic tank and soak pit 30 supplying and installing ready made pvc septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (provision for cc/rcc/sand/06mm aggregate for the preparation of bed shall be paid separately. 4.35 to 50 flush capacity

State Government

TRN :49062069 | 13 May, 2025

Tender Value : 87.7 Thousand

Kangazha - Kerala

Tender for tender for dbhs kangazha changanacherry group- repair and maintenance to the toilets -- 1 dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: - asbestos sheet 2 labour charges for dismantling damaged closet - fitter (1st) engaged 3 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. - for thickness of tiles 10 mm to 25 mm 4 earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil 5 solid block masonry using pre cast solid blocks (factory made) of size 30x20x15 cm or nearest available size confirming to is 2185 part i of 1979 for foundation and plinth with thickness 15cm in: cm 1:6 ( 1 cement :6 coarse sand) etc complete 6 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 7 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. -size of tile 600 x 600 mm. 8 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:-w.c. pan with isi marked white solid plastic seat and lid 9 extra labour charges and material charges for washing and clearng toilet inside (floor and wall) using acid soap water, wire brush, water etc. 10 steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 11 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12 supplying and providing the pvc sintex door, including all cost of material and labour charge. etc.

corporations/Associations/Others

TRN :49062190 | 11 Jun, 2025

Tender Value : 7.64 Crore

Kalol - Gujarat

Tender for tender for providing plumbing, lowering, laying, jointing r.c.c np3 pipe for sewer collecting system, construction of house connection chamber, road resurfacing and o&m of 2 years for kalol town under ground drainage project.

corporations/Associations/Others

TRN :49062345 | 29 May, 2025

Tender Value : 5.43 Lacs

Muradnagar - Uttar Pradesh

Tender for tender for ward no. 13 moh. pipeline road moh. mahajanan from ravindra kashyap to hariom kashyaps house via deepaks house and subsidiary lane. c.c. road and r.c.c. drain construction work.

Related Searched Keywords : pipe drain

List of pipe-drain Tenders

Tender for drainage work through pipe from ward no. 2, sikraulmo lashkar sunbeam school, varuna culvert to shyam sundars house

Tender for tender for urgent replacement of damaged pcb board, refrigerant gas chagrining, drain pipe replacement, shifting and reinstallation of different split type ac at different floors of a/b/c block of new secretariat building, kolkata-700001 (job no.-ns/rw/04 of 25-26) .

Tender for tender for providing plumbing, lowering, laying, jointing r.c.c np3 pipe for sewer collecting system, construction of house connection chamber, road resurfacing and o&m of 2 years for kalol town under ground drainage project.

Tender for tender for ward no. 13 moh. pipeline road moh. mahajanan from ravindra kashyap to hariom kashyaps house via deepaks house and subsidiary lane. c.c. road and r.c.c. drain construction work.

Get pipe drain Tender Alert...

Related Searched Keywords : pipe drain

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us