Filters

List of plastic-paint Tenders

List of latest plastic-paint Tenders in Indian Tenders. Click on any plastic-paint Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for plastic-paint Tenders.

All-Tenders (95)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49019630 | 13 May, 2025

Tender Value : 18.00 Lacs

Kaushambi - Uttar Pradesh

Tender for tender for painting and repair work in treasury manjhanpur - demolishing brick work manually/ by mechanical means including stacking of serviceablematerial and disposal of unserviceable material within 50 metres lead as per direction ofengineer-in-charge. 2 dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and falseceiling including disposal of un service able surplus material and stacking ofservice able material with in 50 meters lead as directed by engineer- in -charge. 3 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : 4 providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 9.7.1 second class teak wood 5 12mm cement plaster of mix 1:6 ( 1cement: 6 coarse sand ) 6 providing and laying vitrified floor tiles in different sizes of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement etc.complete. 7 removing white or colour wash by scrapping and sand papering and preparing thesurface smooth including necessary repairs to scratches etc. complete 8 providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete. 9 wall painting with premium acrylic emulsion paint of interior grade 10 providing and fixing brass bib cock of approved quility of 20mm dia complete 11 providing and fixing consealedstop cock of approved quility of 20mm dia complete 12 providing and fixing white vitreous china pedastal typewater closet with isi marked solid plastic seat and lid complete 13 providing and fixing automatic sensor based urinal systemhindware senso art sensor as per avilablity in market as per direction of e/i 14 providing and fixing hidware floracommode complete set per avilablity in market as per direction of e/i 15 providing and fixing counter top wash hand basinper avilablity in market ( jaquar or equivalent ) as per direction of e/i 16 providing and fixing shower of approved quility of 15 mm dia complete 17 providing and fixing mirror of supirior glass of approved quility and required shape complete 18 providing and fixing low lavel flushing cistern with mannualy controlled device 10 l capasity. 19 supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 5 / 6 amp. 20 providing and fixing mcb as per avilablity in market as per direction of e/i 21 providing and fixing led tube light as per avilablity in market as per direction of e/i 22 providing and fixing exhaust fan as per avilablity in marketas per direction of e/i 23 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c cuttingand making good the walls etc.internal work - exposed on wall18.10.2 20 mm dia nominal bore 24 providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 25 providing and fixing gate valve of approved quility 26 providing plumbing work by technician/ plumber 27 providing window repairing work by technician/ fiter grade 1 28 electrification work in wall panneling as per direction of e/i 29 providing wooden work repairing by carpenter 2nd class 30 providing cleaning work by beldar 31 providing colornest roller blinds polyster curtains for windows and fixing of intirior work on existing window as per direction of e/i 32 providing and fixing in wall panelling in single layer exterior grade hdhmr boards of action tesa & equivalent recommended gradingstreated for fungal/borer/termite resistance and calibrated for high moisture resistance as per grade-1, is-12406-2003 and also ecomarked labelled by isi for enviournment friendly with density 850 kg/cum (5% variation)] to existing frame/base/wall ) and top layer with action tesa ac3 8mm hdf laminated plank(880kg/m3) using fully threaded csk phillips headed s.s. screws of required sizes and headless nails, glue etc. (to secure top decorative layer on the base layer)wherever recommended all complete as per direction of the engineer-in-charge. 33 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required 34 providing & fixing glow sign bord for double lock hall as per direction of e/i 35 granite stone slab of colour black or other 8.2.2.1 area of slab upto 0.50 sqm 36 providing & fixing soap dispensor as per direction of e/i 37 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge. 14.1.1 with cement mortar 1:4 (1 cement : 4 fine sand

State Government

TRN :49019658 | 01 Jan, 0001

Tender Value : 0

Hukkeri - Karnataka

Tender for construction of kitchen shed at the government marathi higher primary school in salamwadi village - supplys ofboulders,supplys ofbond stone 20 x 20 x 45 cm,supplys ofsize stone 20 x 20 x 25 cms,supplys ofplasticizer / super plasticizer,supplys ofbinding wire,supplys oftmt bars fe 500,supplys ofcasurina poles 100 - 150 mm,supplys ofsilver oak or equivalent planks 38 mm thick,supplys ofportland cement,supplys ofcoarse sand (zone iii),supplys ofbroken stone aggregate 12 mm to 10 mm size,supplys ofbroken stone aggregate 20 mm size,supplys ofbroken stone aggregate 40 mm size,supplys ofdry distemper,supplys of5.50 mm thick plain glass,supplys ofchrominum plated screws,supplys ofcleat angles,supplys ofalluminium handles - 15 mm,supplys ofalluminium tower bolt - 20 cm,supplys ofpvc edge beading,supplys ofrubber beading for shutters beading,supplys ofnylon rollers,supplys ofaluminium window frame section 1.20 mm thick,supplys ofenamel metal paint,supplys ofms flat,supplys ofm.s rods,supplys ofhonnewood planks for panels 20 mm thick,supplys ofhonne wood,supplys ofmathi/nandi wood planks for panels 25 mm thick,supplys ofburnt bricks class 35 (non modular),supplys ofgranite/trap broken metal 100 mm and down size,supplys ofjungle wood runners and planks,supplys oflead or pvc connection pipe 32mm dia (for wash basin),supplys ofc.i. / m.s. brackets for flushing cistern,supplys ofbrass stop cock,supplys ofcp brass waste 32 mm of standard pattern,supplys ofcp brass chain with plug,supplys ofcopper plated brass piller tap 15mm,supplys ofwhite vitreous china clay flat back wash basin size 630x450mm,supplys ofbib cock 20mm nominal bore,supplys ofpolythylene pipes high density 25mm external dia,supplys ofpvc pipe of 4kg cum75 mm,supplys ofpolyenthylene water storage tank of specified capacity l,supplys ofunit cost as per the specification ( galven sheet),supplys ofcorbon electrodes,supplys ofrms gusset plate,supplys ofms pipes of 80 mm to 100 mm dia,supplys ofcudddapah slab 4 cm thick/shahabad/thandur blue,supplys ofvitrified tiles 600x600 mm,supplys ofwater proofing cement paint,supplys ofwhitening

State Government

TRN :49019662 | 01 Jan, 0001

Tender Value : 0

Hukkeri - Karnataka

Tender for construction of kitchen shed at government marathi higher primary school in modage village - supplys ofboulders,supplys ofbond stone 20 x 20 x 45 cm,supplys ofsize stone 20 x 20 x 25 cms,supplys ofplasticizer / super plasticizer,supplys ofbinding wire,supplys oftmt bars fe 500,supplys ofcasurina poles 100 - 150 mm,supplys ofsilver oak or equivalent planks 38 mm thick,supplys ofportland cement,supplys ofcoarse sand (zone iii),supplys ofbroken stone aggregate 12 mm to 10 mm size,supplys ofbroken stone aggregate 20 mm size,supplys ofbroken stone aggregate 40 mm size,supplys ofdry distemper,supplys of5.50 mm thick plain glass,supplys ofchrominum plated screws,supplys ofcleat angles,supplys ofalluminium handles - 15 mm,supplys ofalluminium tower bolt - 20 cm,supplys ofpvc edge beading,supplys ofrubber beading for shutters beading,supplys ofnylon rollers,supplys ofaluminium window frame section 1.20 mm thick,supplys ofenamel metal paint,supplys ofms flat,supplys ofm.s rods,supplys ofhonnewood planks for panels 20 mm thick,supplys ofhonne wood,supplys ofmathi/nandi wood planks for panels 25 mm thick,supplys ofburnt bricks class 35 (non modular),supplys ofgranite/trap broken metal 100 mm and down size,supplys ofjungle wood runners and planks,supplys oflead or pvc connection pipe 32mm dia (for wash basin),supplys ofc.i. / m.s. brackets for flushing cistern,supplys ofbrass stop cock,supplys ofcp brass waste 32 mm of standard pattern,supplys ofcp brass chain with plug,supplys ofcopper plated brass piller tap 15mm,supplys ofwhite vitreous china clay flat back wash basin size 630x450mm,supplys ofbib cock 20mm nominal bore,supplys ofpolythylene pipes high density 25mm external dia,supplys ofpvc pipe of 4kg cum75 mm,supplys ofpolyenthylene water storage tank of specified capacity l,supplys ofunit cost as per the specification ( galven sheet),supplys ofcorbon electrodes,supplys ofrms gusset plate,supplys ofms pipes of 80 mm to 100 mm dia,supplys ofcudddapah slab 4 cm thick/shahabad/thandur blue,supplys ofvitrified tiles 600x600 mm,supplys ofwater proofing cement paint,supplys ofwhitening

State Government

TRN :49019663 | 01 Jan, 0001

Tender Value : 0

Hukkeri - Karnataka

Tender for construction of kitchen shed at government marathi higher primary school in shettihalli village - supplys ofboulders,supplys ofbond stone 20 x 20 x 45 cm,supplys ofsize stone 20 x 20 x 25 cms,supplys ofplasticizer / super plasticizer,supplys ofbinding wire,supplys oftmt bars fe 500,supplys ofcasurina poles 100 - 150 mm,supplys ofsilver oak or equivalent planks 38 mm thick,supplys ofportland cement,supplys ofcoarse sand (zone iii),supplys ofbroken stone aggregate 12 mm to 10 mm size,supplys ofbroken stone aggregate 20 mm size,supplys ofbroken stone aggregate 40 mm size,supplys ofdry distemper,supplys of5.50 mm thick plain glass,supplys ofchrominum plated screws,supplys ofcleat angles,supplys ofalluminium handles - 15 mm,supplys ofalluminium tower bolt - 20 cm,supplys ofpvc edge beading,supplys ofrubber beading for shutters beading,supplys ofnylon rollers,supplys ofaluminium window frame section 1.20 mm thick,supplys ofenamel metal paint,supplys ofms flat,supplys ofm.s rods,supplys ofhonnewood planks for panels 20 mm thick,supplys ofhonne wood,supplys ofmathi/nandi wood planks for panels 25 mm thick,supplys ofburnt bricks class 35 (non modular),supplys ofgranite/trap broken metal 100 mm and down size,supplys ofjungle wood runners and planks,supplys oflead or pvc connection pipe 32mm dia (for wash basin),supplys ofc.i. / m.s. brackets for flushing cistern,supplys ofbrass stop cock,supplys ofcp brass waste 32 mm of standard pattern,supplys ofcp brass chain with plug,supplys ofcopper plated brass piller tap 15mm,supplys ofwhite vitreous china clay flat back wash basin size 630x450mm,supplys ofbib cock 20mm nominal bore,supplys ofpolythylene pipes high density 25mm external dia,supplys ofpvc pipe of 4kg cum75 mm,supplys ofpolyenthylene water storage tank of specified capacity l,supplys ofunit cost as per the specification ( galven sheet),supplys ofcorbon electrodes,supplys ofrms gusset plate,supplys ofms pipes of 80 mm to 100 mm dia,supplys ofcudddapah slab 4 cm thick/shahabad/thandur blue,supplys ofvitrified tiles 600x600 mm,supplys ofwater proofing cement paint,supplys ofwhitening

State Government

TRN :49019970 | 01 Jan, 0001

Tender Value : 10.45 Lacs

Channapatna - Karnataka

Tender for supply of construction material for the g.p building construction in akkuru g.p, channapatna taluk. - material-039-water poof cement paint,material-038-water closet,material-037-vitrified tiles,material-035-tmt steel,material-034-supply of wash basin,material-033-steel-1,material-032-stainless steel hand rail,material-030-size stone,material-029-sanitary items,material-028-sand,material-027-plastic emulsion paint,material-026-plastic bindgae,material-025-painter,material-024-nandi/mathi wood,material-023-name board,material-022-ms grill,material-021-ms door,material-018-honnewood,material-017-granite tiles,material-016-glazed tiles,material-015-gate valve,material-014-enamel paint,material-012 cpvc pipes,material-009 cement,material-008 cement solid block bricks,material-007 casurina poles,material-006 brass bib cock,material-005 bond stone,material-004 binding wire,material-003-40 mm jelly,material-002-20mm jally,material-001-10mm-m.s. road

State Government

TRN :49019973 | 01 Jan, 0001

Tender Value : 4.89 Lacs

Kundapura - Karnataka

Tender for the supply of constructional materials for the construction of new ladies toilet building in govt. p.u.college of hosangadi village under mgnrega and education department fund scheme of hosangadi gram panchayath limits, kundapura taluk and udupi district - clg_tl_59electrification,clg_tl_58display board,clg_tl_57polyenthylene water storage tank of specified capacity l,clg_tl_56doors(14nos),clg_tl_55polythylene pipes high density 32mm external dia,clg_tl_54pvc pipe of 10kg/cum,110 mm,clg_tl_53pvc pipe of 6kg/cum,63 mm,clg_tl_52licenced plumber with tools,clg_tl_51lead or pvc connection pipe 32mm dia (for wash basin),clg_tl_50c.i. / m.s. brackets for flushing cistern,clg_tl_49brass stop cock,clg_tl_48cp brass waste 32 mm of standard pattern,clg_tl_47cp brass chain with plug,clg_tl_46copper plated brass piller tap 15mm,clg_tl_45white vitreous china clay flat back wash basin size 550x400mm,clg_tl_44painter class i,clg_tl_43plastic emulsion paint,clg_tl_42burnt lime/shell lime,clg_tl_41border tiles 30 x 10 cms,clg_tl_40glazed tiles 300x450,clg_tl_39adhesive for joints,clg_tl_38high bond tile adhesive for vitrified tiles,clg_tl_37vitrified tiles 600x600 mm,clg_tl_36black plastic seat with lid as specified,clg_tl_35white glazed/viterous china clay 10lts low level flushingcistern, with fittings and brackets and 40 mm white c.p. flush pipe,clg_tl_34european type water classet of specific make,clg_tl_33mosquito proof coupling 25mm,clg_tl_32special for overflow pipe,clg_tl_31g.i. overflow pipe 20mm dia,clg_tl_30m.s. holder bat clamp 32mm,clg_tl_29g.i. 32mm dia telescopic flush pipes with fittings specials,clg_tl_28c.i. / m.s. brackets for flushing cistern,clg_tl_27p.v.c. flushing cistern 10 lts low level with fitting,clg_tl_26100mm s or p trap,clg_tl_25orissa pattern of size 580x440mm with integral type foot rests,clg_tl_24binding wire,clg_tl_23tmt bars fe 500,clg_tl_22silver oak or equivalent planks 38 mm thick,clg_tl_21jungle wood runners and planks,clg_tl_20mixer,clg_tl_19watering charge,clg_tl_18formwork,clg_tl_17broken granite metal 10 mm,clg_tl_16granite metal 20 mm,clg_tl_15solid concrete blocks (40x10x20 cms)-4.00 n/sqmm,clg_tl_14casurina poles 100 - 150 mm,clg_tl_13latrite,clg_tl_12stone chistler class ii,clg_tl_11mason class ii (with tools),clg_tl_10mason class i (with tools),clg_tl_09boulders,clg_tl_08bond stone 20 x 20 x 45 cm,clg_tl_07size stone 20 x 20 x 25 cms,clg_tl_06mixer (concrete) - 1 cum capacity,clg_tl_05portland cement,clg_tl_04coarse sand (zone iii),clg_tl_03broken stone aggregate 12 mm to 10 mm size,clg_tl_02broken stone aggregate 20 mm size,clg_tl_01broken stone aggregate 40 mm size

State Government

TRN :49020042 | 13 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for tender for annual repair to rawatpur colony type-iv servant qatar - dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. dsr -15.56 2 12 mm cement plaster of mixwith 1:6 (1 cement: 6 coarse sand) dsr 13.4.2 on wall. 3 12 mm cement plaster of mixwith 1:4 (1 cement: 4 coarse sand) dsr 13.4.1 on celling. 4 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dsr-9.21.1 5 providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :200x10 mm dsr9.74.2 6 providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm dsr 9.75.1 7 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per is: 1378) 300x16 mm dsr 9.62.2 8 providing and fixing bright finished brass handles with screws etc.complete: 125 mm dsr 9.81.3 9 providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete dsr 9.82 10 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with second class teak wood beading 62x19 mm.dsr-9.51.1 11 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completedsr - 13.88 12 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.dsr-13.80 13 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work (two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface dsr-13.112.1 14 finishing walls with water proofing cement paint of required shade .( old work one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. ) dsr-13.109.1 15 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .dsr-13.81 16 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old workdsr-13.99.1 17 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc., complete. dsr-11.39 18 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complet size of tile 600x600 mm .dsr-14.41.2 19 providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge. with granite stone of area less than 0.50 sqm. dsr 16.86.1 20 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.15 mm nominal dia pipes . dsr 18.8.1 21 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 25 mm nominal dia pipes . dsr 18.8.3 22 providing and fixing c.p. brass bib cock of pproved quality conforming to is:8931 : 15 mm nominal bore sor/dsr 18.49.1 23 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore sor/dsr 18.50.1 24 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15 mm nominal bore sor/dsr 18.53.1 25 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931.15 mm nominal bore dsr 18.52.1 26 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with asingle 15 mm c.p. brass pillar tap dsr 17.7.2 27 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests dsr 17.1.2 28 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredw.c. pan with isi marked white solid plastic seat and lid dsr 17.2.1 29 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 17.9.1 white glazed fire clay kitchen sink of size 600x450x 250 mm .dsr -17.9.1 30 providing and fixing t-iron frames for doors, windows and ventilators of mild steel teesections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).40x40x6mm@3.5kg/m . dsr 10.13.1 31 brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) . with f.p.s.(non modular) bricks .dsr-6.4.2 32 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate dsr 11.3.1 33 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity - white .dsr-17.18.1 34 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr-18.48 35 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter dsr12.41.2 36 renewing glass panes, with wooden fillets wherever necessary:float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) dsr14.6.1 37 cleaning of chocked sewer line by diesel running vehicle mountinghydraulic operated high pressure suction cum jetting sewer cleaningmachine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150 mm dia upto 300 mm dsr 14.77 38 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) dsr 5.2.2 39 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more.dsr 5.22a.6 40 centering and shuttering including strutting, propping etc. and removal of form work for : columns, piers, abutments, pillars, posts and struts.dsr 4.3.3

State Government

TRN :49020061 | 13 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for tender for annual repair to mc robertganj colony - dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. dsr -15.56 2 12 mm cement plaster of mixwith 1:6 (1 cement: 6 coarse sand) dsr 13.4.2 on wall. 3 12 mm cement plaster of mixwith 1:4 (1 cement: 4 coarse sand) dsr 13.4.1 on celling. 4 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dsr-9.21.1 5 providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :200x10 mm dsr9.74.2 6 providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm dsr 9.75.1 7 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per is: 1378) 300x16 mm dsr 9.62.2 8 providing and fixing bright finished brass handles with screws etc.complete: 125 mm dsr 9.81.3 9 providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete dsr 9.82 10 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with second class teak wood beading 62x19 mm.dsr-9.51.1 11 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completedsr - 13.88 12 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.dsr-13.80 13 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work (two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface dsr-13.112.1 14 finishing walls with water proofing cement paint of required shade .( old work one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. ) dsr-13.109.1 15 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .dsr-13.81 16 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work dsr-13.99.1 17 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc., complete. dsr-11.39 18 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complet size of tile 600x600 mm .dsr-14.41.2 19 providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge. with granite stone of area less than 0.50 sqm. dsr 16.86.1 20 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.15 mm nominal dia pipes . dsr 18.8.1 21 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 25 mm nominal dia pipes . dsr 18.8.3 22 providing and fixing c.p. brass bib cock of pproved quality conforming to is:8931 : 15 mm nominal bore sor/dsr 18.49.1 23 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore sor/dsr 18.50.1 24 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15 mm nominal bore sor/dsr 18.53.1 25 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931.15 mm nominal bore dsr 18.52.1 26 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with asingle 15 mm c.p. brass pillar tap dsr 17.7.2 27 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests dsr 17.1.2 28 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredw.c. pan with isi marked white solid plastic seat and lid dsr 17.2.1 29 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 17.9.1 white glazed fire clay kitchen sink of size 600x450x 250 mm .dsr -17.9.1 30 providing and fixing t-iron frames for doors, windows and ventilators of mild steel teesections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).40x40x6mm@3.5kg/m . dsr 10.13.1 31 brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) . with f.p.s.(non modular) bricks .dsr-6.4.2 32 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in:: cement mortar 1:6 (1 cement : 6 coarse sand)dsr 6.1.2 33 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate dsr 11.3.1 34 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity - white .dsr-17.18.1 35 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr-18.48 36 earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by engineer-in-charge. all kinds of soil dsr 2.6.1 37 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). dsr 4.1.8 38 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter dsr12.41.2 39 renewing glass panes, with wooden fillets wherever necessary:float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) dsr14.6.1 40 cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150 mm dia upto 300 mm dsr 14.77 41 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) dsr 5.2.2 42 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more.dsr 5.22a.6 43 centering and shuttering including strutting, propping etc. and removal of form work for : columns, piers, abutments, pillars, posts and struts.dsr 4.3.3

Government Departments

TRN :49020091 | 27 May, 2025

Tender Value : 10.00 Lacs

Raisen - Madhya Pradesh

Tender for supply of sanitation,electricals etc , sanitation, electrical, and stationary items : , mitti ghada may dakken , sarso oil ( branded) , nariyal oil ( branded) , pili mitti , geru mitti , chuna dali bala putai , khjoor jharoo , shikh jharoo , bash jharoo , toilet cleaner , sabun kapde dhone ka , saboon nahane ka , washing powder , phynil , tooth pest , tooth brush , shaving cream 100gm , shaving brush , shaving razor blade , fitkari , tongue cleaner plastic bali , kanghi , oil paint all color , oil paint silver , tar peen oil , praymer iron , wood praymer , paint brush 06 inch , plastic mug , brush letrin , brush paints 02-03inch , balti plastic 20 liter capicity , bulb holder , tubelight rod , tubelight complet ( rod,patti.starter) , wire bundle copper 1/18 , wire bundle copper 3/20 , wire bundle copper 7/20 , lapeta wire bundle copper , tourch sell/watch sell , 09 watt led , 12 watt led , 15 watt led , 40 watt led , 16 inches chakki part , reem a4 paper size , pen ball point red / blue , rifil red and blue , teproll , ink ped , stepller , stepller pin , file cover , file pad , teg , whitenner , allpin , carban paper , gond , fevicol , chalan pad , pencil , ruber , sorpner , highliter , chak , ragiter line bale 100 pages , bricks 4x4x8 , ret bina mitti kankan pather , gitti all size , cement good quality , loha tested , distemper , emulsion

Government Departments

TRN :49020435 | 22 May, 2025

Tender Value : 12.18 Lacs

Chandigarh - Chandigarh

Tender for amc for firefighting equipment installed in various building admin block, a.c. joshi library, arc hall, main guest house, girls hostel no. 3 to 7, in panjab university campus, sector -14, chandigarh.-fire fighting amc 2 annual maintenance contract of fire fighting equipment installed in various building in p.u. campus. the contract includes 4 visit in year to check the equipments i.e. fire buckets, hydrant points, hose box, hose reels, brigade inlet(up to 4 ways), smoke detector panels, smoke senser, mcp, hooters, sprinklers. the accessories which malfunction, broken or irrepairable, shall be changed & cost will be paid in the bill at the time of maintenace.the visit & report of checklist prepared by firm shall be duly checked by s.d.e. incharge & same shall be submitted to office of the undersigned. any complaint of said equipments shall be first report to s.d.e. incharge with immediate effect.after confirmation of complaint , the accessories if any to be fixed shall be , duly approved by engineer in charge at site. 3 butterfly valve 100 mm hand lever operated isi marked replaceable liner cf8m/55316 disc pn 10 cast iron water type butterfly valve size 100 mm (4 inch) 4 fire hydrant auto control fire pump pressure switch kp-35 pressure switch- 060-113391, r-0.2 to 7.5 bar d 07 to 4 bar precisioncontrol for water pumps- wide pressure range. ip 30 for water pump. 5 fire hydrant pressure gauge glycerinindustrialglycerin filled pressure gauge, dial size 2? (50 mm), stainless steel 304 case bayonet type & ss 316l internals, range 0 to 10.6 kg/cm2 with dual scale of 150 psi, direct mounting bottom entry, connection 1/4? npt (m), accuracy 1.6% fsd 6 fire pump panel pump control panel (dol starter 7 5 hp) 7 hydrant pump motor rewinding 8 over hauling of pump and motor 9 12 volt 6ah dry battery for fire panelexide 10 sensorconventional smoke detectorfeatures & benefits: automatic intelligent fire detectors with high reliability and low power consumption used for premises and items of property with medium and high concentration of valuable assets detector series iq8quad features, system advantages designed for optimal operation on system 8000, iq8control and flexes control fire alarm systems with multisensor fire detectors for the detection of all types of fires, even under the most difficult operating conditions and with 360° led visibility in alarmdetector with and without loop isolators different options of installation wiring in loop and spur combination maximum number of detectors with cable lengths of up to 3,500 m with installation cable for fire detection, e.g. cables i-y(st)yn x 2 x 0.8 mm 11 hootersounder cum strobe exclusive range of fire alarm sounder cum strobe for addressable & conventional use with red abs type plastic housings. wall mounted medium frequency sounder strobe designed as per nfpa-72 to complete the demand of fire alarm systems. the fire alarm sounder strobe is a device that produce sound & flashing when manual call point & detector sense any kind of fire activity. it has dual tone sound and it is enough to make alert everyone inside the building 12 fire panel4 zone alarm panel with lcd display for zone indication fault and fire and hooter facility. make: agni device 13 wireless radio emitter with rechargeable batteries & having inbuilt transmitter & storbe with red flasher sounder 14 wireless smoke detectors with mounting kit & testing button with 9v nippo/ eveready battery 15 wire less advance manual call poin with battery push button type & red enclosure & flap cover 16 batteries rechargeable for wireless radio emitter 17 batteries for wireless smoke detector 9v nippo/ eveready 18 batteries for wirelesss advance manual call point 19 wire (mtr) 2 core 1.5 square mm ake poly 20 hammer with chain 21 pendent sprinkler 68 degree, standardresponse, normal coverage.15mm 22 newage /swastik ss fire hydrant single landing valve. size : 63mm/ 75mm/ 80mm, inlet : 4” nb flanged, outlet : female instantaneous conforming specification : is 5290, type “b” , isi marked 23 newage/swastikmake short branch pipe, stainless steel ss304, with 63 mm male inst. inlet, male threaded outlet, with 16 mm bore hexagonal base nozzle, conforming to is: 903. isi marked 24 hose box wall mounting double door type, 30 x 24 x 10 size, to accommodate 15mtr./30 mtr. length of delivery hose and a branch pipe, glass fronted door, with lock,key and a break-glass recess for keys, red in colour 18 gauge sheet 25 newage premier brand all synthetic fibre circular woven jacketed rubber lined fire hose, delivery, 38kg/cm2 burst pressure,22kg/cm2 proof pressure,14kg/cm2 working pressure, bearing is:636-88 type a mark, 63mm x 15 mtr. length duly cooper wire bounded to fire hose coupling, , ss 304, instantaneous type, pair of male and female parts, bearing is:903 mark. 26 newage make drum for hose reelcomplete, duly painted isi marked powdercoated 27 rubber hose-is444-size-20mm length : 30 meter rubber hose (for hose reel drum) water hose,20 mm with (isi mark 444/1987) type-2,w.p. 10 kgf/cm2 with shut off nozzle 28 newage make hose reel pipe with drum,swinging wall mounting type complete with rubber hose-is444- size-20mm length : 30 meter rubber hose (for hose reel drum) water hose, 20 mm with (isi mark 444/1987) type-2,w.p. 10 kgf/cm2 with shut off nozzle 29 newage make air release valve with15 mm dia stop cock. 30 inlet breeching 2 way , sg iron body, 2 nos ss-304 63 mm male inst. inlet with non- return valve, drain valve, 220mm od, 180mm pcd, eight holes of 19mm dia, pvc blank cap & chain, wp 7 kg/cm2, tp 21 kg/cm2, painted red. 31 female coupling washerfor hydrant valveadaptor 32 hydrant seat washer/hydrant tikki 33 ci operating wheel vlavefor hydrant 34 rubber beading with double groove 35 newage make drum for hose reelcomplete, duly painted isi marked powdercoated 36 rubber hose-is444-size-20mm length : 30 meter rubber hose (for hose reel drum) water hose, 20 mm with (isi mark 444/1987) type-2,w.p. 10 kgf/cm2 with shut off nozzle 37 newage make hose reel pipe with drum,swinging wall mounting type complete with rubber hose-is444-size-20mm length : 30 meter rubber hose (for hose reel drum) water hose, 20 mm with (isi mark 444/1987) type-2,w.p. 10 kgf/cm2 with shut off nozzle 38 swastik makeair release valve with 15 mm dia stop cock 39 inlet breeching 4 way, sg iron body, 4 nos ss-304 63 mm male inst. inlet with non- return valve, drain valve, 285 mm od, 150 mm pcd 240 mm, eight holes of 23 mm dia, pvc blank cap & chain, wp 7 kg/cm2, tp 21 kg/cm2, painted red 40 inlet breeching 2 way , sg iron body, 2 nos ss-304 63 mm male inst. inlet with non- return valve, drain valve, 220mm od, 180mm pcd, eight holes of 19mm dia, pvc blank cap & chain, wp 7 kg/cm2, tp 21 kg/cm2, painted red. 41 female coupling washerfor hydrant valveadaptor 42 hydrant seat washer/hydrant tikki 43 ci operating wheel vlavefor hydrant 44 spindle with assembly complete 45 rubber beading with double groove 46 female adaptor of hydrant valve60 mm dia size 47 mcp glass size: 3”x3”, 2mm thick 48 hydrant box glass size:16”x 7” , 4 mm thick 49 blank cap suitable for 63mm hydrant valve outlet 50 hose reel drum nozzle ss 51 hydrant box key

Related Searched Keywords : plastic paint

List of plastic-paint Tenders

Get plastic paint Tender Alert...

Related Searched Keywords : plastic paint

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us