Filters

List of pvc Tenders

List of latest pvc Tenders in Indian Tenders. Click on any pvc Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for pvc Tenders.

All-Tenders (532)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Corporations And Associations And Others

TRN :49029360 | 26 May, 2025

Tender Value : 6.27 Crore

Agra - Uttar Pradesh

Tender for tender for repairing of existing closed ttsp in tehseel etmadpur in distt. agra - supply & fixing of isi make starter etc complete 2 supply& fixing of 4mm2 isi make copper metalled submerssible cable etc complete 3 supply, carting of 2 hp isi make sub merssible pump, isi starter including lowering into bore complete. 4 repairing of old sub merssible motor pump set including ,extraction from the bore, carting upto workshop, and lowering into bore complete. 5 making outlet, inlet, fittings with g.i. pipe, high quality pvc bib cock tap connection etc. complete 6 repairing of old existing ttsp structure as per requirement of siteincluding electric connection from electricity department, all materials,labour,t&p etc. complete 7 reboring of ttsp including lowering of pvc pipe, gi pipe, submerssible pump,starter, cable etc. complete as per unit estimate. 8 supply & fixing of isi make 10 kl capacity pvc tank three layers etc. complete. 9 supply and lowering of32mm dia upvc pipe 17 kg/cm2 (as per relevant isi code)pipe etc. complete 10 supply,laying of pvc 40 mm dia*10 kg/cm2 rising main including excavation,back filling and ,etc. complete.

corporations/Associations/Others

TRN :49029439 | 22 May, 2025

Tender Value : 0

Sabarkantha - Gujarat

Tender for annual rate for providing and supplying pvc pipes and its accessories in idar nagarpalika idar-160mm ?6 kg pvc isi pipe 110mm ?6 kg pvc isi pipe 90mm ?6 kg pvc isi pipe 75mm ?6 kg pvc isi pipe 63mm ?6 kg pvc isi pipe 160mm ?4 kg pvc isi pipe 110mm ?4 kg pvc isi pipe 90mm ?4kg pvc isi pipe 75mm ?4 kg pvc isi pipe 63mm ?4kg pvc isi pipe 160mm ?6 kg pvc isi tee 110mm ?6 kg pvc isi tee 90mm ?6 kg pvc isi tee 75mm ?6 kg pvc isi tee 63mm ?6 kg pvc isi tee 160mm ?4 kg pvc isi tee 110mm ?4 kg pvc isi tee 90mm ?4kg pvc isi tee 75mm ?4 kg pvc isi tee 63mm ?4kg pvc isi tee 160mm ?6 kg pvc isi elbo 110mm ?6 kg pvc isi elbo 90mm ?6 kg pvc isi elbo 75mm ?6 kg pvc isi elbo 63mm ?6 kg pvc isi elbo 160mm ?4 kg pvc isi elbo 110mm ?4kg pvc isi elbo 90mm ?4 kg pvc isi elbo 75mm ?4 kg pvc isi elbo 63mm ?4 kg pvc isi elbo 160mm ?6 kg pvc isi bend 110mm ?6 kg pvc isi bend 90mm ?6 kg pvc isi bend 75mm ?6 kg pvc isi bend 63mm ?6 kg pvc isi bend 160mm ?4kg pvc isi bend 110mm ?4 kg pvc isi bend 90mm ?4 kg pvc isi bend 75mm ?4 kg pvc isi bend 63mm ?4kg pvc isi bend 160mm ?6kg pvc isi cuplar 160mm ?6 kg pvc isi cuplar 110mm ?6 kg pvc isi cuplar 90mm ?6 kg pvc isi cuplar 75mm ?6 kg pvc isi cuplar 63mm ?6 kg pvc isi cuplar 110mm ?4kg pvc isi cuplar 90mm ?4 kg pvc isi cuplar 75mm ?4 kg pvc isi cuplar 63mm ?4kg pvc isi cuplar 160mm pvc joint 110mm pvc joint 90 mm pvc joint 75mm pvc joint 63mm pvc joint 160mm pvc isi sluice valve 110mm pvc isi sluice valve 90mm pvc isi sluice valve 63mm pvc isi sluice valve 160 mm c.i. caller with ring 110 mm c.i. caller with ring 90 mm c.i. caller with ring 75 mm c.i. caller with ring 63 mm c.i. caller with ring 90mmxoii service seddle 75mmxoii service seddle 110mmxoii service seddle oix6k.u pvc isi pipe oilx6k.upvc isi pipe 1x6k.u pvc isi pipe oix6k.u pvc isi pipe oilx6k.u pvc isi cuplar 1x6k.u pvc isi cuplar 1llx6k.u pvc isi cuplar oix6k.u pvc isi elbo oilx6k.u pvc isi elbo 1x6k.u pvc isi elbo [ 1llx6k.u pvc isi elbo 0ll upvc tee 0lll upvc tee 1 upvc tee 1l upvc tee 2 upvc tee 0ll upvc f.tee 0lll upvc f.tee 1 upvc f.tee 1l upvc f.tee 2 upvc f.tee 0ll upvc m.tee 0lll upvc m.tee 1 upvc m.tee 1l upvc m.tee 2 upvc m.tee 0ll upvc plain cap 0lll upvc plain cap 1 upvc plain cap 1l upvc plain cap 2 upvc plain cap 0ll upvc thed cap 0lll upvc thed cap 1 upvc thed cap 1l upvc thed cap 2 upvc thed cap 3upvc thed cap 4 upvc thed cap mcl tape roll solution 22ml solution 50ml solution 237ml solution 437ml 0ll pvc water tap 1pvc water tap hexo blade 63 mm pvc m.t.a 75 mm pvc m.t.a 90 mm pvc m.t.a 110 mm pvc m.t.a 63 mm pvc f.t.a 75 mm pvc f.t.a 90 mm pvc f.t.a 110 mm pvc f.t.a 63x 50mm pvc reducer 75x 63mm pvc reducer 90x 75mm pvc reducer 110x 90mm pvc reducer 110x 75mm pvc reducer 110x 63mm pvc reducer 0ll upvc ball valve 0lllu pvc ball valve 1 upvc ball valve 1ll upvc ball valve 2 upvc ball valve 3 upvc ball valve 4 upvc ball valve 0ll upvc tank nipple 0lll upvc tank nipple 1 upvc tank nipple 1l upvc tank nipple 2 upvc tank nipple 110mm pvc repair seddle 90mm pvc repair seddle 75mm pvc repair seddle 63mm pvc repair seddle 63x50 mm pvc bushing 75x63 mm pvc bushing 110x90 mm pvc bushing 110x75 mm pvc bushing white tank 180mm ?6 kg pvc isi pipe 200mm ?6 kg pvc isi pipe 160x 90mm pvc reducer 160x 75mm pvc reducer 160x 110mm pvc reducer 140x 90mm pvc reducer 160x90 mm pvc bushing 160x75 mm pvc bushing 160x110 mm pvc bushing 0ll steel water tap steel water tap 0ll gi nipple 0lll gi nipple gi nipple 0ll gi coupling 0lll gi coupling 1gi coupling 200 mm ci joint 160 mm ci joint 140 mm ci joint 200 mm tee 140 mm tee trikam tatha aatha 90 mm horse pipe 75 mm horse pipe 110 mm horse pipe vandri pana 200mm ?6 kg pvc isi bend 160mm ?6 kg pvc isi bend 140mm ?6 kg pvc isi bend 200mm ?6kg pvc isi cuplar 160mm ?6 kg pvc isi cuplar 140mm ?6 kg pvc isi cuplar suter raso pana i.s.i

corporations/Associations/Others

TRN :49029445 | 19 May, 2025

Tender Value : 10.00 Lacs

Kutch - Gujarat

Tender for annual rate contract for supply & provide furniture of various departments at gandhidham municipal corporation area, gandhidham.-1 office cupbord big size: 17 x 34 x 75 (25g) storvel 4 salves 2 revolving chair primium (fb, hb) 3 revolving chair full (hb) 4 revolving chair full (lb) 5 office cupboard poria size: 65 x 15 x 30 (25g) 6 office cupboard (addi) small size: 50 x 15 x 30 (25g) 7 visitor chair (a) type 8 p.v.c. chair cello unique, nilkanth & others (heavy) 9 office table 4 x 2 steel from with wooden top (drower & cupboard) (25g) 10 office table 5x21/2 steel frame with wooden top 3 drower & cupboard 11 office table 5x21/2 wooden 3 drower & cupboard 12 office table 6x3 wooden 3 drower & cupboard 13 3 - seater bench (m.s.) 14 3 - seater bench (s.s.) 15 computer table 16 3 - seater bench (s.s.) stainless steel) 17 table, with glass (1) 21/2 x 6, (2) 21/2 x 5, (3) 4x2 18 table glass with fitting

State Government

TRN :49029493 | 15 May, 2025

Tender Value : 32.33 Lacs

Gautam Buddha Nagar - Uttar Pradesh

Tender for construction of e-library room in village begmabad yea. wc-06 - earth work in excavation in ordinary soil in all of foundation trenches including dressing of the side and ramming of bottom.lifts up to 1.50 m including getting out theexcavated soil and disposal of surplus excavated soil as directed with in a lead of 50m. (most/a.r./yeida) 2 supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos/ lindane emulsifiable concentrate of 20%. (dar/2.34.1/based on uppwd/sor-2020)) 3 diluting and injecting chemical emulsion for post-constructional anti-termite treatment (excluding the cost of chemical emulsion) : treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 coarse sand) to match the existing floor: with chlorpyriphos/lindane e.c. 20% with 1% concentration (dar/2.35.3.1/based on uppwd/sor-2020)) 4 2.5 cm thick damp proof course with cement and approved coarse sand 1:1½ with and including water proofing as ordered by the engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. (uppwd/sor-2020/361) 5 applying a coat of residual petroleum bitumen of grade of vg-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 6 cement concrete with 4cmgauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, labour, tools&plants etc required for proper completion of the work. 7 b/w with bricks of class 150 in foundation & plinth in cm 1:4 (based on up pwd sor 2020) cement mortar 1:4 ( 1cement :4coarse sand) 8 m-150 brick work in 1:4 one cement and four course sand 2.20 f.m. mortar superstructure but for walls of half brick thick including supply of all material, labour, t&p etc. required for proper completion of the work. (uppwd/sor-2020/305(a)+310a 9 m-150 brick work in 1:4 one cement and four course sand 2.20 f.m. mortar superstructure but for walls of half brick thick including supply of all material, labour, t&p etc. required for proper completion of the work. (uppwd/sor-2020/305(a)+310a 10 extra for providing and placing in position 2 nos 6mm dia. m.s. bars at every third course of half brick masonry.uppwd-sor-2020-dar-18/6.15/ 11 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. (note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately). all works upto plinth level 12 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. (note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately).all works above plinth level upto floor v level 13 centringand shutteringincluding strutting, propping etc. andremoval of form for : foundation footings, base of column 14 centringand shutteringincluding strutting, propping etc. andremoval of form for : lintels, beams, plinth beam, grinder 15 centringand shutteringincluding strutting, propping etc. andremoval of form for : suspended floors, roofs, landings 16 columns, pillars, piers, abutments, posts and struts. (dar/5.9.6/based on uppwd/sor-2020)) 17 edges of slabs and breaks in floors and walls:under 20 cms wide. (dar/5.9.16.1/based on uppwd/sor-2020)) 18 earth work in rough excavation , banking excavaated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, all leads as per(a.r. )for all kind of soil. 19 steel rainforcement for r.c.c. work including straightening, cutting bending, placing in position and binding all complete upto plinth level thermo-mechanically treated bars of grade fe-500d or more./cold twisted bars. (dar/5.22.6/based on uppwd/sor-2020)) 20 12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)based on up pwd sor 2020 dar-18/13.4.2 21 6mm cement plaster of mix: 1:3 (1 cement : 3 coarse sand)based on up pwd sor 2020 dar-18/13.17 22 15mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)based on up pwd sor 2020 dar-18/13.4.2 23 finishing walls with acrylic smooth exterior paint of required shade: new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 24 distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade 25 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.dar-18/13.26 26 painting with synthetic enemel paint of approved brand and manufacture to give an even shade: two or more coats on new work. 27 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 110mm dia 28 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. single tee with door 110x110x110 mm (dar/12.42.3.2/based on uppwd/sor-2020) 29 bend 87.5° 110 mm bend (dar/12.42.5.2/based on uppwd/sor-2020) 30 shoe (plain) 110 mm shoe (dar/12.42.6.2/based on uppwd/sor-2020) 31 providing and fixing unplasticised -pvc pipe clips of approved design to unplasticised - pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with m.s. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm (dar/12.43.2/based on uppwd/sor-2020) 32 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.(dar/12.44/based on uppwd/sor-2020) 33 steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.dar-18/10.25.2 34 providing and fixing water closet squatting pan (indian type w.c. pan with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests.up pwd sor-2020-dar 18/17.1.1 35 providing and fixing wash basin with c.l. brackets, 15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:uppwd sor-2020-dar 17.7.1 36 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.20mm od pipes. (dar/18.8.2/based on uppwd/sor-2020) 37 25mm od pipes. (dar/18.8.3/based on uppwd/sor-2020) 38 providing and fixingbrass gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore. (dar/18.17.1/based on uppwd/sor-2020) 39 32 mm nominal bore. (dar/18.17.2/based on uppwd/sor-2020) 40 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer-in-charge over the rcc slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) after two days of proper curing applying a second coat of cement slurry using 2.75kg! sqm of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge. d) finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to is: 2645 and approved by engineer-in-charge including laying glass fibre doth of approved quality in top layer of plaster and finally finishing the surface with trowe’ with neat cement suvr an making pattern ot 300x300 mm square 3mm deep. e) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above operations to be done in order and as directed and specified by the engineer-in-charge: dar18/22.7.1 41 providing and placing on terrace (at all floor levels) polyethylene water storage tank isi: 12701 marked with cover and suttable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank dar 18/ 18.48 42 making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - iii) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.(dar 2018-4.17)based on uppwd sor/2020 43 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600mm (dar/11.41.2/based on uppwd/sor-2020)) 44 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (dar/8.31/based on uppwd/sor-2020)) 45 providing and fixing brass bib cock of approved quality: 15 mm nominal bore (dar/18.15.1/based on uppwd/sor-2020)) 46 providing and fixingbrass gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore. (dar/18.17.1/based on uppwd/sor-2020) 47 providing and fixing nahani trap 75x100mmincluding all complete. 48 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand-dar-18/13.6.1/p-902 49 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30mm thick including isi marked stainless steel butt hinges with necessary screws. (dar/9.21.2/based on uppwd/sor-2020)) 50 extra for providing isi marked stainless steel butt hinges instead of m.s. pressed butt hinges bright finished of required size with necessary screws. (shutter area to be measured). (dar/9.14/based on uppwd/sor-2020)) 51 renewing panes of glass in door, window & ventilators or fixing in the new work with 3mm thick glass panes fixed with brads & putty includung supply of all material , labour , tools & plants required for proper completion of workuppwd sor 2020/p26/806 52 prroviding and fixing isi mark 3 layer prelaminated particle board conforming to grade 2 type-iii of is-12823/20b laminated with 0.6-0.8 mm thick laminate conforming to is-2046/1995 and balancing lamination of 0.5 mm thick on the back side (size 700750430) including all complete 53 supply of work sb collection office/visitor chain with sheat dxwxh 400400450 mm padded with polyurithane foam complete 54 supply wook at site sb collection executive table of 3 layer prelaminated particle board (wood product) of grade 2 type 2 of is-12823/latest 1830 mm 950 mm 750mm including all complete 55 supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. dar-18/2.27 56 providing and fixing factory made isi marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as f7d, f4b, k11 b and k12 b etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 57 constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design with common burnt clay f.p.s. (non modular) bricks of class designation 7.5.(dar/18.33.1/based on uppwd/sor-2020) 58 providing, laying and jointing glazed stoneware pipes class sp-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : (dar/19.1.1/based on uppwd/sor-2020) 59 providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round s.w. pipes including bed concrete as per standard design : (dar/19.2.2/based on uppwd/sor-2020) 60 providing and fixing square-mouth s.w. gully trap class sp-1 complete withc.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (dar/19.4.1/based on uppwd/sor-2020) 61 providing and fixing heavy class ss gratingof approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and ft, ut & fd.size 150 mm x 150 mm 62 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.(dar/17.73.2/based on uppwd/sor-2020)) 63 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (dar/17.31/based on uppwd/sor-2020)) 64 providing and fixing ptmt soap dish holder having length of 138mm, breadth102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (dar/18.65/based on uppwd/sor-2020)) 65 providing and fixing chicken wire mesh (murga jali) 24 gauge and 20 mesh at junction of rcc and masonry walls including fixing in position with steel nails of 25 mm in length as approved at required as directed by engineer-in-charge, scaffolding etc. complete. (ar/yeida//based on uppwd/sor-2020))½x24 gauge 66 providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.(dar/9.101.1/based on uppwd/sor-2020))single rubber stopper 67 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:250x10mm(dar/9.97.2/based on uppwd/sor-2020)) 68 providing and fixing aluminium handles,isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.125 mm (dar/9.100.1/based on uppwd/sor-2020)) 69 providing and fixing ptmt extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 gms. (dar/18.75.3/based on uppwd/sor-2020)) 70 providing & fixing of cp heavy duty bottle trap 32mm. (complete complying with relavent standard specification and as directed by the competent authority.) for wash basin&urinal 71 providing and fixing 1 mm thick m.s. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm m.s. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and t- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer up pwd sor-2020-dar-18/10.4 72 construction of granular sub-base by providing close graded material, mixing in mechanical mix plant at omc, carriage of mixed material to work at site, spreading uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grade-1 material. (morth/(ar/yeida/based on uppwd/sor-2020) 73 providing and laying 60mm thick i.s.i. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of engineer-in-charge with conforming to is-15658 and irc:sp:63. (ar/yeida/ based on uppwd/sor-2020) 74 wiring point for light in 1.5 sq. mm. pvcinsulated singlecorecopperconductor cable (inpvcconduit with 1.5sq.mm. frlsh pvc insulated multistrand copperconductor cable as earth wire drawn inside conduit.)and5 amp.flush typeswitch& ceiling rose/angle/batten holderfixedwith3mmthickphenolic laminate backalitesheet withbrass machinescrews andcup washers mounted overexisting m.s.switch boardbox/junction boxwith supplyofallmaterial, labour& t&p etc. requiredforproper completion of the work complete in all respect, as directed by engineer in charge pwd-2018 ps no-174c 75 supply and wiring of submains with 2 nos. of 2.5 sq. mm. frlsh pvc insulated1100 vgrade multistrand singlecore copper conductorcable in 25mm dia heavy duty (2mm thick) pvc conduitwith2 nos 2.5 sq.mm.frlsh pvc insulated multistrand copperconductor cable asearth continuity wire drawn in conduit complete in all respect, as directed by engineer in charge pwd-2018 ps no-261c 76 supply and fixing of power plug with 20 amp./250 voltflush type modularswitchand 5 pin 20 a/250 voltflush typeuniversal modular socket switch on concealed m.sboxincluding supply of allmaterial, labourt&petc. complete in all respect, as directed by engineer in charge .pwd-2018 ps no-1139a 77 s&f surface/flush mounting 8 ways spn distribution board with additional metal door without mcb complete in all respect, as directed by engineer in charge. pwd-2018 ps -1024a 78 s&f of 6 amp to 32 amp. mcb (10 ka) c curve complete in all respect, as directed by engineer in charge.pwd-2018ps -1002cat-a 79 s&f of 40amp. dp mcb (10 ka) c curve complete in all respect, as directed by engineer in charge. pwd-2018 ps no-1010 cat-a 80 providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. (dar/10.18/based on uppwd/sor-2020))

State Government

TRN :49029502 | 30 May, 2025

Tender Value : 9.39 Lacs

Kutch - Gujarat

Tender for supply of playing equipment for various children park at gsecl colony kltps-1 store code: 9421400015 multi play system (baby) (mps-3 in 1) 2 store code: 9421000020 swing for 2 children height 7 ft 3 store code: 9421400033 frp wave slide : 10 ft length, 5 ft height, with safety railing, ms staircase, ms platform from 50 mm x 1? pipe, crc sheets ms steps, fitting stand at ms slide exit point, color : powder coating/auto color, galvanized anchor fasteners. 4 store code: 9421400034 standard see-saw : 6ft, 75 mm round ms pipe with stand for balancing see saw with busing, 4 seats plastic / pvc sheets with handle, cover bearing with smooth compression, color : powder coating / auto color, galvanized anchor fasteners 5 store code: 9421400032 ms spring powder coated, frp duck with handle, ms fasteners, color: powder coating /auto color, galvanized anchor fasteners. 6 store code: 9421400035 frp spiral slide:5 ft height, with safety railing, ms staircase, ms platform from 50 mm x 1? pipe, crc sheets ms steps, fitting stand at ms slide exit point, color : powder coating / auto color, galvanized anchor fasteners.

corporations/Associations/Others

TRN :49029516 | 19 May, 2025

Tender Value : 70.00 Lacs

Kutch - Gujarat

Tender for annual rate contract for the work to supply various goods at water works department of gandhidham municipal corporation.=1 isi mark 6kg/cm2 pvc pipe with socket, supreme, finolex, prince, dutron, mefer and its equivalent 1.1 63mm 1.2 90mm 1.3 110mm 1.4 160mm 1.5 200mm 1.6 225mm 2 isi mark 4kg/cm2 pvc pipe with as above mentioned brand 2.1 63mm 2.2 90mm 2.3 110mm 2.4 160mm 2.5 200mm 2.6 225mm 3.1 6 cast iron foot valve 3.2 8 cast iron foot valve 3.3 10 cast iron foot valve 4.1 6 cast iron isi mark non return valve 4.2 8 cast iron isi mark non return valve 4.3 10 cast iron isi mark non return valve 5.1 3 cast iron isi mark pn-1 sluice valve 5.2 4 cast iron isi mark pn-1 sluice valve 5.3 6 cast iron isi mark pn-1 sluice valve 5.4 8 cast iron isi mark pn-1 sluice valve 5.5 10 cast iron isi mark pn-1 sluice valve 5.6 12 cast iron isi mark pn-1 sluice valve 5.7 14 cast iron isi mark pn-1 sluice valve 5.8 16 cast iron isi mark pn-1 sluice valve 5.9 18 cast iron isi mark pn-1 sluice valve 5.10 24 cast iron isi mark pn-1 sluice valve 6 isi mark class 10kg/cm2 ac pipe fitting ci collor all sbr rubber ring set with nut bolt and other necessary item, short collar 6.1 3 short collar 6.2 4 short collar 6.3 6 short collar 6.4 8 short collar 6.5 10 short collar 6.6 12 short collar 6.7 14 short collar 6.8 16 short collar 6.9 18 short collar 6.10 24 short collar 7 isi mark class 10kg/cm2 ac pipe fitting ci collor all sbr rubber ring set with nut bolt and other necessary item, long collar 7.1 3 long collar 7.2 4 long collar 7.3 6 long collar 7.4 8 long collar 7.5 10 long collar 7.6 12 long collar 7.7 14 long collar 7.8 16 long collar 7.9 18 long collar 7.10 24 long collar 8 isi mark class 15kg/cm2 ac pipe fitting ci collor all sbr rubber ring set with nut bolt and other necessary item, short collar 8.1 3 short collar 8.2 4 short collar 8.3 6 short collar 8.4 8 short collar 8.5 10 short collar 8.6 12 short collar 8.7 14 short collar 8.8 16 short collar 8.9 18 short collar 8.10 24 short collar 9 isi mark class 15kg/cm2 ac pipe fitting ci collor all sbr rubber ring set with nut bolt and other necessary item, long collar 9.1 3 long collar 9.2 4 long collar 9.3 6 long collar 9.4 8 long collar 9.5 10 long collar 9.6 12 long collar 9.7 14 long collar 9.8 16 long collar 9.9 18 long collar 9.10 24 long collar 10 cast iron double acting air valve 3 to 24 11 isi brand engine with couple pump (dewatering set) mounted on trolley with two tires tube, heavy duty suction pipe 4 meters and heavy duty delivery pipe 10 meters 11.1 5 hp 11.2 7.5 hp 11.3 10 hp 12 isi mark priming motor with pump 12.1 0.5 hp 12.2 1 hp 13 cast iron tail piece flanged to fit class 10 kg/cm2 ac pipe from 3 to 24 14 80mm to 600mm cast iron fitting flange and without flange 15 isi brand heavy duty valve opening wrench taparia make or its equivalent 15.1 14 15.2 18 15.3 24 16 isi mark heavy duty fix spanner set 17 isi mark heavy duty ring spanner set 18 chain pully block 5 ton capacity 19 20 21 solution for pvc pipe joint 22 waterproof compound 23 liquid for quick cement setting in leakage repair 24 aprooved quality black japan oil paint 25.1 1/2 isi mark brass wheel valve 25.2 3/4 isi mark brass wheel valve 25.3 1 isi mark brass wheel valve 25.4 1/5 isi mark brass wheel valve 25.5 2 isi mark brass wheel valve 25.6 2/5 isi mark brass wheel valve 25.7 3 isi mark brass wheel valve 26.1 6 6mm thick ms pipe 26.2 10 6mm thick ms pipe 27.1 3 ms flange 27.2 4 ms flange 27.3 6 ms flange 27.4 8 ms flange 27.5 10 ms flange 27.6 12 ms flange 27.7 14 ms flange 27.8 16 ms flange 27.9 18 ms flange 27.10 24 ms flange 28 fatakdi 29.1 1/2 gi pipe 29.2 3/4 gi pipe 29.3 1 gi pipe 29.4 2 gi pipe 29.5 3 gi pipe 29.6 4 gi pipe 30 hypo chloride solution 80 to 90 gpl (chlorine liquid) in plastic cane 31 chlorine tablet isi mark 32 bleaching powder 33.1 200 liter heavy pvc tanki 33.2 500 liter heavy pvc tanki 33.3 700 liter heavy pvc tanki 33.4 1000 liter heavy pvc tanki 34 nut blot 35 rubber packing 36 spun yarn 37 stad nut approved quality 38 hexa frame approved quality 39 hexo blade isi marked 40 hand glowes isi marked 41 isi mark pvc fittings all socket, elbow, tee, inner, outer and cap etc. 41.1 2 41.2 3 41.3 4 41.4 6 41.5 8 42 all type gi fittings 43.1 3 dhoriya pipe (pvc) (can be wrapped) 43.2 4 dhoriya pipe (pvc) (can be wrapped) 43.3 5 dhoriya pipe (pvc) (can be wrapped) 43.4 6 dhoriya pipe (pvc) (can be wrapped) 44.1 2 saction pipe (for water tanker) 44.2 2/5 saction pipe (for water tanker) 44.3 3 saction pipe (for water tanker) 44.4 4 saction pipe (for water tanker) 44.5 5 saction pipe (for water tanker) 45.1 1/2 pvc fittings (socket) 45.2 3/4 pvc fittings (socket) 45.3 1 pvc fittings (socket) 45.4 1.5 pvc fittings (socket) 45.5 2 pvc fittings (socket) 45.6 3 pvc fittings (socket) 45.7 4 pvc fittings (socket) 45.8 5 pvc fittings (socket) 45.90 6 pvc fittings (socket) 45.10 8 pvc fittings (socket) 45.11 9 pvc fittings (socket) 45.12 10 pvc fittings (socket) 45.13 12 pvc fittings (socket) 46.1 1/2 pvc fittings (tee) 46.2 3/4 pvc fittings (tee) 46.3 1 pvc fittings (tee) 46.4 1.5 pvc fittings (tee) 46.5 2 pvc fittings (tee) 46.6 3 pvc fittings (tee) 46.7 4 pvc fittings (tee) 46.8 5 pvc fittings (tee) 46.9 6 pvc fittings (tee) 46.10 8 pvc fittings (tee) 46.11 9 pvc fittings (tee) 46.12 10 pvc fittings (tee) 46.13 12 pvc fittings (tee) 47.1 1/2 pvc fittings (elbow) 47.2 3/4 pvc fittings (elbow) 47.3 1 pvc fittings (elbow) 47.4 1.5 pvc fittings (elbow) 47.5 2 pvc fittings (elbow) 47.6 3 pvc fittings (elbow) 47.7 4 pvc fittings (elbow) 47.8 5 pvc fittings (elbow) 47.9 6 pvc fittings (elbow) 47.10 8 pvc fittings (elbow) 47.11 9 pvc fittings (elbow) 47.12 10 pvc fittings (elbow) 47.13 12 pvc fittings (elbow) 48.1 1/2 pvc fittings (outer) 48.2 3/4 pvc fittings (outer) 48.3 1 pvc fittings (outer) 48.4 1.5 pvc fittings (outer) 48.5 2 pvc fittings (outer) 48.6 3 pvc fittings (outer) 48.7 4 pvc fittings (outer) 48.8 5 pvc fittings (outer) 48.9 6 pvc fittings (outer) 48.10 8 pvc fittings (outer) 48.11 9 pvc fittings (outer) 48.12 10 pvc fittings (outer) 48.13 12 pvc fittings (outer) 49.1 1/2 pvc fittings (inner) 49.2 3/4 pvc fittings (inner) 49.3 1 pvc fittings (inner) 49.4 1.5 pvc fittings (inner) 49.5 2 pvc fittings (inner) 49.6 3 pvc fittings (inner) 49.7 4 pvc fittings (inner) 49.8 5 pvc fittings (inner) 49.9 6 pvc fittings (inner) 49.10 8 pvc fittings (inner) 49.11 9 pvc fittings (inner) 49.12 10 pvc fittings (inner) 49.13 12 pvc fittings (inner) 50.1 1/2 pvc fittings (reducer) 50.2 3/4 pvc fittings (reducer) 50.3 1 pvc fittings (reducer) 50.4 1.5 pvc fittings (reducer) 50.5 2 pvc fittings (reducer) 50.6 3 pvc fittings (reducer) 50.7 4 pvc fittings (reducer) 50.8 5 pvc fittings (reducer) 50.9 6 pvc fittings (reducer) 50.10 8 pvc fittings (reducer) 50.11 9 pvc fittings (reducer) 50.12 10 pvc fittings (reducer) 50.13 12 pvc fittings (reducer) 51.1 1/2 pvc fittings (end cap (dummy)) 51.2 3/4 pvc fittings (end cap (dummy)) 51.3 1 pvc fittings (end cap (dummy)) 51.4 1.5 pvc fittings (end cap (dummy)) 51.5 2 pvc fittings (end cap (dummy)) 51.6 3 pvc fittings (end cap (dummy)) 51.7 4 pvc fittings (end cap (dummy)) 51.8 5 pvc fittings (end cap (dummy)) 51.9 6 pvc fittings (end cap (dummy)) 51.10 8 pvc fittings (end cap (dummy)) 51.11 9 pvc fittings (end cap (dummy)) 51.12 10 pvc fittings (end cap (dummy)) 51.13 12 pvc fittings (end cap (dummy)) 52.1 1/2 pvc fittings (broos) 52.2 3/4 pvc fittings (broos) 52.3 1 pvc fittings (broos) 52.4 1.5 pvc fittings (broos) 52.5 2 pvc fittings (broos) 52.6 3 pvc fittings (broos) 52.7 4 pvc fittings (broos) 52.8 5 pvc fittings (broos) 52.9 6 pvc fittings (broos) 52.10 8 pvc fittings (broos) 52.11 9 pvc fittings (broos) 52.12 10 pvc fittings (broos) 52.13 12 pvc fittings (broos) 53.1 2 pvc fittings (dee-corlar) 53.2 3 pvc fittings (dee-corlar) 53.3 4 pvc fittings (dee-corlar) 53.4 5 pvc fittings (dee-corlar) 53.5 6 pvc fittings (dee-corlar) 53.6 7 pvc fittings (dee-corlar) 53.7 8 pvc fittings (dee-corlar) 53.8 9 pvc fittings (dee-corlar) 53.9 10 pvc fittings (dee-corlar) 53.10 11 pvc fittings (dee-corlar) 53.11 12 pvc fittings (dee-corlar) 53.12 13 pvc fittings (dee-corlar) 53.13 14 pvc fittings (dee-corlar) 53.14 15 pvc fittings (dee-corlar) 53.15 16 pvc fittings (dee-corlar) 53.16 17 pvc fittings (dee-corlar) 53.17 18 pvc fittings (dee-corlar) 53.18 19 pvc fittings (dee-corlar) 53.19 20 pvc fittings (dee-corlar) 53.20 21 pvc fittings (dee-corlar) 53.21 22 pvc fittings (dee-corlar) 53.22 23 pvc fittings (dee-corlar) 53.23 24 pvc fittings (dee-corlar) 54.1 2 pvc fittings (long band) 54.2 3 pvc fittings (long band) 54.3 4 pvc fittings (long band) 54.4 5 pvc fittings (long band) 54.5 6 pvc fittings (long band) 54.6 7 pvc fittings (long band) 54.7 8 pvc fittings (long band) 54.8 9 pvc fittings (long band) 54.9 10 pvc fittings (long band) 54.10 11 pvc fittings (long band) 54.11 12 pvc fittings (long band) 54.12 13 pvc fittings (long band) 54.13 14 pvc fittings (long band) 54.14 15 pvc fittings (long band) 54.15 16 pvc fittings (long band) 54.16 17 pvc fittings (long band) 54.17 18 pvc fittings (long band) 54.18 19 pvc fittings (long band) 54.19 20 pvc fittings (long band) 54.20 21 pvc fittings (long band) 54.21 22 pvc fittings (long band) 54.22 23 pvc fittings (long band) 54.23 24 pvc fittings (long band) 55.1 2 pvc fittings (pvc clamp) 55.2 3 pvc fittings (pvc clamp) 55.3 4 pvc fittings (pvc clamp) 55.4 5 pvc fittings (pvc clamp) 55.5 6 pvc fittings (pvc clamp) 55.6 7 pvc fittings (pvc clamp) 55.7 8 pvc fittings (pvc clamp) 55.8 9 pvc fittings (pvc clamp) 55.9 10 pvc fittings (pvc clamp) 55.10 11 pvc fittings (pvc clamp) 55.11 12 pvc fittings (pvc clamp) 55.12 13 pvc fittings (pvc clamp) 55.13 14 pvc fittings (pvc clamp) 55.14 15 pvc fittings (pvc clamp) 55.15 16 pvc fittings (pvc clamp) 55.16 17 pvc fittings (pvc clamp) 55.17 18 pvc fittings (pvc clamp) 55.18 19 pvc fittings (pvc clamp) 55.19 20 pvc fittings (pvc clamp) 55.20 21 pvc fittings (pvc clamp) 55.21 22 pvc fittings (pvc clamp) 55.22 23 pvc fittings (pvc clamp) 55.23 24 pvc fittings (pvc clamp) 56.1 1/2 gi fittings (socket) 56.2 3/4 gi fittings (socket) 56.3 1 gi fittings (socket) 56.4 1.5 gi fittings (socket) 56.5 2 gi fittings (socket) 56.6 3 gi fittings (socket) 56.7 4 gi fittings (socket) 56.8 5 gi fittings (socket) 56.9 6 gi fittings (socket) 56.10 8 gi fittings (socket) 57.1 1/2 gi fittings (tee) 57.2 3/4 gi fittings (tee) 57.3 1 gi fittings (tee) 57.4 1.5 gi fittings (tee) 57.5 2 gi fittings (tee) 57.6 3 gi fittings (tee) 57.7 4 gi fittings (tee) 57.8 5 gi fittings (tee) 57.9 6 gi fittings (tee) 57.10 8 gi fittings (tee) 58.1 1/2 gi fittings (elbow) 58.2 3/4 gi fittings (elbow) 58.3 1 gi fittings (elbow) 58.4 1.5 gi fittings (elbow) 58.5 2 gi fittings (elbow) 58.6 3 gi fittings (elbow) 58.7 4 gi fittings (elbow) 58.8 5 gi fittings (elbow) 58.9 6 gi fittings (elbow) 58.10 8 gi fittings (elbow) 59.1 1/2 gi fittings (outer) 59.2 3/4 gi fittings (outer) 59.3 1 gi fittings (outer) 59.4 1.5 gi fittings (outer) 59.5 2 gi fittings (outer) 59.6 3 gi fittings (outer) 59.7 4 gi fittings (outer) 59.8 5 gi fittings (outer) 59.9 6 gi fittings (outer) 59.10 8 gi fittings (outer) 60.1 1/2 gi fittings (inner) 60.2 3/4 gi fittings (inner) 60.3 1 gi fittings (inner) 60.4 1.5 gi fittings (inner) 60.5 2 gi fittings (inner) 60.6 3 gi fittings (inner) 60.7 4 gi fittings (inner) 60.8 5 gi fittings (inner) 60.9 6 gi fittings (inner) 60.10 8 gi fittings (inner) 61.1 1/2 gi fittings (reducer) 61.2 3/4 gi fittings (reducer) 61.3 1 gi fittings (reducer) 61.4 1.5 gi fittings (reducer) 61.5 2 gi fittings (reducer) 61.6 3 gi fittings (reducer) 61.7 4 gi fittings (reducer) 61.8 5 gi fittings (reducer) 61.9 6 gi fittings (reducer) 61.10 8 gi fittings (reducer) 62.1 1/2 gi fittings (nipple) 62.2 3/4 gi fittings (nipple) 62.3 1 gi fittings (nipple) 62.4 1.5 gi fittings (nipple) 62.5 2 gi fittings (nipple) 62.6 3 gi fittings (nipple) 62.7 4 gi fittings (nipple) 62.8 5 gi fittings (nipple) 62.9 6 gi fittings (nipple) 62.10 8 gi fittings (nipple) 63.1 1/2 gi fittings (end cap (dummy)) 63.2 3/4 gi fittings (end cap (dummy)) 63.3 1 gi fittings (end cap (dummy)) 63.4 1.5 gi fittings (end cap (dummy)) 63.5 2 gi fittings (end cap (dummy)) 63.6 3 gi fittings (end cap (dummy)) 63.7 4 gi fittings (end cap (dummy)) 63.8 5 gi fittings (end cap (dummy)) 63.9 6 gi fittings (end cap (dummy)) 63.10 8 gi fittings (end cap (dummy)) 64.1 1/2 apvc fittings (socket) 64.2 3/4 apvc fittings (socket) 64.3 1 apvc fittings (socket) 64.4 1.5 apvc fittings (socket) 64.5 2 apvc fittings (socket) 64.6 3 apvc fittings (socket) 64.7 4 apvc fittings (socket) 64.8 5 apvc fittings (socket) 64.9 6 apvc fittings (socket) 65.1 1/2 apvc fittings (tee) 65.2 3/4 apvc fittings (tee) 65.3 1 apvc fittings (tee) 65.4 1.5 apvc fittings (tee) 65.5 2 apvc fittings (tee) 65.6 3 apvc fittings (tee) 65.7 4 apvc fittings (tee) 65.8 5 apvc fittings (tee) 65.9 6 apvc fittings (tee) 66.1 1/2 apvc fittings (elbow) 66.2 3/4 apvc fittings (elbow) 66.3 1 apvc fittings (elbow) 66.4 1.5 apvc fittings (elbow) 66.5 2 apvc fittings (elbow) 66.6 3 apvc fittings (elbow) 66.7 4 apvc fittings (elbow) 66.8 5 apvc fittings (elbow) 66.9 6 apvc fittings (elbow) 67.1 1/2 apvc fittings (outer) 67.2 3/4 apvc fittings (outer) 67.3 1 apvc fittings (outer) 67.4 1.5 apvc fittings (outer) 67.5 2 apvc fittings (outer) 67.6 3 apvc fittings (outer) 67.7 4 apvc fittings (outer) 67.8 5 apvc fittings (outer) 67.9 6 apvc fittings (outer) 68.1 1/2 apvc fittings (inner) 68.2 3/4 apvc fittings (inner) 68.3 1 apvc fittings (inner) 68.4 1.5 apvc fittings (inner) 68.5 2 apvc fittings (inner) 68.6 3 apvc fittings (inner) 68.7 4 apvc fittings (inner) 68.8 5 apvc fittings (inner) 68.9 6 apvc fittings (inner) 69.1 1/2 apvc fittings (reducer) 69.2 3/4 apvc fittings (reducer) 69.3 1 apvc fittings (reducer) 69.4 1.5 apvc fittings (reducer) 69.5 2 apvc fittings (reducer) 69.6 3 apvc fittings (reducer) 69.7 4 apvc fittings (reducer) 69.8 5 apvc fittings (reducer) 69.9 6 apvc fittings (reducer) 70.1 1/2 apvc fittings (end cap(dummy)) 70.2 3/4 apvc fittings (end cap(dummy)) 70.3 1 apvc fittings (end cap(dummy)) 70.4 1.5 apvc fittings (end cap(dummy)) 70.5 2 apvc fittings (end cap(dummy)) 70.6 3 apvc fittings (end cap(dummy)) 70.7 4 apvc fittings (end cap(dummy)) 70.8 5 apvc fittings (end cap(dummy)) 70.9 6 apvc fittings (end cap(dummy))

Government Departments

TRN :49029618 | 15 May, 2025

Tender Value : 0

Bilaspur - Uttar Pradesh

Tender for tender for supply of cctv camera accessories - cctv camera & other related equipments etc. 2 cctvcamera 4 m.p with voice full coloured hikvision 3 10 tb hd servilance wd make hdd hard disk 4 sfppoe switch 4 port 5 sfppoe switch 8 port 6 power adoptor for sfp poe switch 7 cat 6 – cable bundle (305) mtr make d-linke 8 optical fiber armoured 6 core 9 optical fiber armoured 12 core 10 hdmi cable 5 mtr. 11 led tv for display 50 with hdmi port 12 ups offline 1 kva 13 iron box for cctv adopter etc. 14 pvc conduct pipe 15 installation (including required spare)

State Government

TRN :49003807 | 26 May, 2025

Tender Value : 30.54 Lacs

Jaipur - Rajasthan

Tender for rate contract for supply of a.c. items for nia jaipur , a.c.items , supplying of r-22 refrigerent gas, maflon/freeon/floron & equilent , supplying of r-32 refrigerent gas,maflon/freeon/floron & equilent , supplying of r-410 refrigerent gas, maflon/freeon/floron & equilent , supplying of copper pipe ½ inch (12.7 mm), total line/max flow & equilent , supplying of copper pipe ¼inch (6.4 mm), total line/max flow & equilent , supplying of copper pipe 3/8inch (9.5 mm) , total line/max flow & equilent , supplying of copper pipe 5/8inch (15.9 mm) , total line/max flow & equilent , supplying of insulation seleve (1 box : 200 pcs)(15.9 mm), supremen/total line/armaflex & equilent , supplying of insulation seleve (1 box : 200 pcs)(3.8 mm), supremen/total line/armaflex & equilent , supplying of insulation seleve(1 box : 200 pcs) (12.7 mm) , supremen/total line/armaflex & equilent , supplying insulation seleve(1 box : 250 pcs) (6.4 mm) ,supremen/total line/armaflex & equilent , supplying of drain pipe 19 mm, any good quality , supplying of breezing rod, any good quality , supplying of maascule tape (black colour) , any good quality , supplying of maascule tape (white colour) , any good quality , supplying of electric tape (1 box : 30 pcs) steelgrip, any good quality , supplying of single phase contactor 220 walt , any good quality , supplying of lpg cane (1 box : 30 pcs) , any good quality , supplying of brizing torch (double barrel) , any good quality , supplying of service jacket 48 inch (reflective), any good quality , supplying of service jacket 54 inch ( reflective) , any good quality , supplying of vacume pump single stage , any good quality , supplying of vacume pump double stage , any good quality , supplying of pvc salution tube , any good quality , supplying of taflon tape, any good quality , supplying of pin valve, any good quality , supplying of flayer nut 5/8 inch, any good quality , supplying of flayer nut ½ inch, any good quality , supplying of flayer nut¼ inch, any good quality , supplying of ptc relly , any good quality , supplying of ac service pump 1800 watt, any good quality , supplying of mini fold guage, any good quality , supplying of clamp meter, any good quality , supplying of 8 mm fastner (1 box : 50 pcs) , any good quality , supplying of empty refrigerator gas cylinder (60 kg.), any good quality , supplying of capacitor 50 + 4 mfd, any good quality , supplying of 2.5 sqmm three core frls pvc sheathed flat flexiblecopper cable as per is:694-2010., polycab/havells/kei/rr & equilent , supplying of 2.5 sqmm four core frls pvc sheathed flat flexiblecopper cable as per is:694-2010., polycab/havells/kei/rr & equilent , supplying of inlet copper tube spring bender for 1/2 inch copper pipe, polycab/havells/kei/rr & equilent , supplying of inlet copper tube spring bender for 5/8 inch copper pipe, any good quality , panasonic/voltas/hitachi/carrier/daiken/l.g./toshiba split ac 1.5 ton , indoor pcb , outdoor pcb , indoor sensor , outdoor sensor , indoor motor , outdoor motor , compressor , cooling coil , condensor coil , fan blade , panasonic/voltas/hitachi/carrier/daiken/l.g./toshiba split ac 2 ton , indoor pcb , outdoor pcb , indoor sensor , outdoor sensor , indoor motor , outdoor motor , compressor , cooling coil , condensor coil , fan blade , electrolux/videocon window ac 1.5 ton , cooling coil , condensor coil , fan blade , motor , compressor , sensor , grill , blue star 3 ton tower ac (tonner capcity 750 grams,printing 15000 pages) , pcb , single phase previnatum , contactor 3 phase , outdoor motor , indoor motor , indoor sensor , fan blade , voltas 4 ton tower ac , pcb , single phase previnatum , contactor 3 phase , outdoor motor , indoor motor , indoor sensor , fan blade , casate ac daiken 2 ton (tonner capcity 120 grams,printing 1500 pages) , pcb , blower motor , outdoor motor , sensor , drain pump , fan blade , casate ac voltas 3.5 ton , pcb , blower motor , outdoor motor , sensor , drain pump , fan blade

State Government

TRN :49005623 | 26 May, 2025

Tender Value : 18.56 Crore

Jayal - Rajasthan

Tender for tender for widening and strengthening on kasnau (sh-92a) to dehri - tarnau - merwas - upto mataji road - 1 part a road work clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of non-thorny jungle 2 excavation in soilwithdozer with lead upto 100 mexcavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. 3 construction of embankment with material obtained from roadway cuttingconstruction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of tables 300-1 and 300-2 as per morth specification clause 305.3 4 construction of embankment with material obtained from borrow pitsconstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3 5 granular sub-base with well graded material (table 400-1)by mix in place methodconstruction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesired density, complete as per morth specification clause 401. for grading iiimaterial 6 crusher run macadam baseproviding crushed run stone aggregate greading conforming to table 400-14 depositing on a prepared surface by hauling vehicles, spreading and mixing witha motor grader, watering and compacting with a threewheel 80-100 kn static roller as per morth specification clause 407 to form a layer of sub-base/base by mixing plant method with 53 mm maximum size of aggregates 7 wet mix macadamproviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead 8 prime coatproviding and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502 9 tack coatproviding and applying tack coat with bitumen emulsion (rs-1)using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503. 10 tack coatproviding and applying tack coat with bitumen emulsion (rs-1)using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per morth specification clause 503. 11 providing and laying dense graded bituminous macadam with 100-120 tph batch type hmp producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 percentby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specifications clause 505 complete in all respects. bitumen (vg-30)grading - ii (26.50 mm (nominal size)) 12 providing and laying bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler,transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specifications clause 507 complete in all respectsfor grading-ii(13 mm nominal size) bitumen (vg-30) 13 providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510.by mechanical means bitumen (vg-30) 14 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511type b bitumen (vg-30) 15 part b c.c. pavement work dry lean cement concreteconstruction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. 16 construction ofun-reinforced , plain cement concrete pavement m-40 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cementas per clause 602.2.2 , coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a in fullyautomatic batching plant andtransported to site intransit mixer for having continous agitated mixer, manufactured as per approved mix designincluding pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using fixed form paver and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawingand morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). 17 providing and fixing of dowel bars of mild steel confirming to is : 432 of specified length and diameters as per morth specification irc 15 & 58 including cutting, placing in position across transverse joint with proper spacing, providing with pvc sleeve complete as per drawing, technical specification and as per direction of the engineer-in-charge. 18 part c protection wallearthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. ordinary soil upto 3 m depth 19 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 20 stone masonry work in cement mortar in foundation complete as per drawing and morth specifications clauses 1402, 1405, 2102 & 2104. random rubble masonry in 1:6 cement mortar 21 plastering with cement mortar (1:4), 20 mm thick on stone work. 22 providing pcc m-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and morth specification clauses 1313, 1411 and 2206.650 mm thick 23 part d c.d.workearthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. ordinary soil upto 3 m depth 24 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 25 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c. grade m 20nominal mix (1:2:4) 26 providing and fixing stone slab covering over drains (kota/bijoliya quarry) having thickness 75 mm to 150 mm including filling of joints in cement mortar 1:3 with 50 mm thick cement concrete flooring in 1:2:4 mix complete with good finish as per approved drawings and specifications.for drain opeining size 300 to 450 mm stone patty drain cover size 800mm x 600mm x 75mm 27 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 28 providing and laying reinforced cement concrete pipe np3 as per design in single row providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets clause 2905. 29 600 mmdia 30 300 mm dia 31 part f road saftykilometrestonereinforced cement concrete m15grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and morth specification clause 801 32 5th kilometre stone (precast) 33 ordinary kilometer stone (precast) 34 200 m stone (precast) 35 traffic signsretro-reflectorised traffic signsproviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on gi pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 36 600 mm equilateral triangle 37 600 mm circular 38 600 mm x 450 mm rectangular 39 900 mm side octagon 40 direction and place identification signs upto 0.9 sqm size boardretro-reflectorised traffic signsproviding and erecting direction and place identification retro-reflectorised sign asper irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1. fixed over aluminium sheeting, 2 mm thickwith areanot exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and morth specification clause 801. direction and place identification signs upto 0.9 sqm size board 41 direction and place identification signs with size more than 0.9 sqm size boardretro-reflectorised traffic signsproviding and erecting direction and place identification retro-reflectorised sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1, fixed over aluminium sheeting, 2 mm thickwith areaexceeding 0.9 sqm supported on dia gi pipe firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and morth specification clause 801 42 marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160 c with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. 43 supplying and fixing of cat’s eye made of aluminium alloy size 75x100x22 mm having 21 biconvex lenses embedded in circular disk of abs plastic on each side. 44 providing and fixing mukhya mantri sadak yojana/ mahatma gandhi rajya sadak yojana informatory sign board with logo for roads funded by state road fund having m.s. definition plate of 1.60 mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast including paint logo as per approved design and colours. the logo shall be made out of 1.6mm thick circular plate duly framed with ms angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. the size of definition plate shall be 1500x600mm and embedding the posts by m-15 cement concrete block45 cm x 45 cm x 60 cm, 60 cm below ground levelincluding lettering / writing and painting etc. complete in all respect.as per morth specification clause 801. 45 supply of swiss type of hazard marker, made out of 2 mm thick m.s. sheet size of box is 15x15 cm with hold fast at bottom, the body is painted in orange stoving enamel paint with white/high intensity grade micro-prismatic type sheeting, on all four side.

Boards / Undertakings / PSU

TRN :48996540 | 13 May, 2025

Tender Value : 1.47 Crore

Matunga - Maharashtra

Tender for repair, renovation, and reconfiguration of lab 1 at the computer engineering and it engineering department, first floor, vjti, matunga, mumbai.= 1 dismantling of existing partitions, wall paneling, etc., all complete as per site requirements, and stacking the usable materials within building premises as directed by the architect/consultant/ engineer-in- charge, etc. complete. (lead upto 100 meters) 2 removal of cement tiles, existing flooring, wall tiles,marble, polished shahabad flooring, dado with or without bed concrete, including stacking the materials as directed, with all leads, lifts, etc., complete. (lead upto 100 meters) 3 dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete. ( lead upto 100 meters) 4 scraping the old paint from the plastered internal surface using a dust-free vacuum paint scraper, followed by coating the entire surface with a mixture of whiting or glue and linseed oil, including the provision of scaffolding, as directed. (the scraping of old paint should be done until the neeru finish of the plaster is achieved.) lead and lift upto 100 meters etc. complete. 5 removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete. 6 removing the existing cement plaster of any thickness without causing dust nuisance, stacking the debris up to a distance of 100 meters, cleaning the site, etc. complete. 7 providing and applying an anti-corrosive chemical to exposed reinforcement of r.c.c. members such as beams, columns, and slabs. this includes one coat of alkaline rust converter (feovert, rusticide, or equivalent) after cleaning the surface with a wire brush, followed by two coats of anti-corrosive, epoxy-based, two-component, zinc-rich primer (materemaco p 130 of basf, phenolic ipnet rb, polyalk flxoprime, or equivalent) for rebar protection on exposed reinforcement. additionally, apply a concrete-penetrating corrosive inhibitor (epco kp-100, polalk ep 113, masterseal 1414 of basf, fosroc, or equivalent) over the adjoining concrete surface. etc. complete. 8 providing and applying a bond coat of approved epoxy resin (masterbrace 1414 of basf, epi bond of krishna conchem, or equivalent) before polymer plaster or concrete to ensure a perfect bond between old concrete and new concrete/polymer plaster surfaces. the bond coat should be applied within half an hour after preparation, conforming to astm c881 type 2. this process includes the use of nylon brushes, scaffolding, labor, etc. complete. 9 providing and applying ready-mix polymer-modified cement mortar with an average thickness of 15mm, using polymer in one or more layers, in a proportion of 1:5:15 (polymer, cement, and quartz sand) as per the manufacturers specifications. the surface should be cured after 72 hours of application using wet gunny bags, etc. complete. 10 providing and applying ready-mix polymer-modified cement mortar with an average thickness of 30mm-50mm, using polymer in one or more layers, in a proportion of 1:5:15 (polymer, cement, and quartz sand) as per the manufacturers specifications. the surface should be cured after 72 hours of application using wet gunny bags, etc. complete. 11 providing and applying a 30mm thick self-curing ceramic polymer microconcrete of an approved make, having a compressive strength above m30, non-shrink, and impermeable, as a filling mortar for load-carrying r.c.c. members in two layers on cleaned concrete surfaces, including honeycomb areas (using manual or mechanical means). the mortar shall be prepared by mixing nicosil c80 and fresh 53-grade cement with the required water-cement ratio to achieve the desired consistency. the application and finishing shall be done by manual trowelling. curing shall be carried out after the initial setting time, in accordance with the manufacturers specifications. the work shall be executed in line with the specifications and as directed by the engineer-in-charge. the work must be carried out by a certified applicator, and the work shall be guaranteed for 5 years. the guarantee shall be provided on a rs. 500/- stamp paper. (the bond coat, as per item no. 08 in the boq, is to be applied before the coating.) 12 providing and applying 12mm thick internal/external ready-mix plaster conforming to is: 4031 (part-4) 1988 and is: 383-1970, in a single coat using cement mortar in a proportion of 1:4, with a special type of polymer additive (approximately 0.4%), on all types of surfaces in all positions, including scaffolding and curing. the plaster shall be followed by a smooth finishing coat of gypsum plaster of 6mm thickness, ensuring an even, smooth surface suitable for painting. complete with necessary curing, scaffolding, and all other related works. 13 providing and applying a priming coat over new/old steel and other metal surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt, and other foreign matter. the surface shall be scoured with wire brushes, fine steel wool, scrapers, and sandpaper, with scaffolding as required, etc. complete. 14 providing and applying priming coat over new wood and wood-based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt, and other foreign matter, sanding, knotting, scaffolding, etc., complete. (brands such as asian paints, dulux paints, nerolac, berger, royal, or equivalent make.) 15 providing and applying two coats of synthetic enamel paint of approved color to new/old structural steel work and woodwork in buildings, including scaffolding if necessary, cleaning, and preparing the surface (excluding primer coat). etc. complete.(brands such as asian paints, dulux paints, nerolac, berger, royal, or equivalent make.) 16 removing and refixingof doors and windows with frames and stacking the materials as directed, including all leads, lifts, labour, fitting etc., complete. (lead up to 100 meters) 17 providing and laying in pattern 600 mm x 600 mm vitrified tile flooring of 8 to 10 mm thickness and confirming to is 15622-2006 ( group bla) of approved make,quality, shade and pattern for flooring . the tile flooring shall be laid in pattern with 2 mm spacers & tiles fixed in cement mortar of 1:4. the rate shall be including floor chipping to attaining required levels, epoxy grouting of joints using approved matching colour tile grout of epoxy grout, necessary protection of the laid floor, acid wash cleaning for any stains before handover. etc. complete as per the drawing, specification and to complete satisfaction of the engineer. rate to include the wastages as per the pattern indicated in the layouts. brands like kajaria, johnson or similar etc. groove shall be filled with grout of approved shade ( brands like laticrete etc.) as dicectedby the engineer-in-charge. etc. complete. basic rate for tile material- rs. 1440/- per sq.m. 18 providing and fixing skirting, including labor, materials, and all related work, etc., complete. rate for skirting of height up to 150 mm. 19 vinyl flooring for hod cabin:providing and fixing approved color homogeneous flooring, 4mm thick with interlocking system, single-layered flexible spc vinyl flooring (spica by tusker vinyl floorings) in roll form, over the provided i.p.s. or kota stone flooring. the flooring will be fixed using approved adhesive, and all joints will be soldered with pvc rods as per the manufacturer’s specifications. the work will be completed as directed, ensuring proper leveling and cleaning. the roll width will be a minimum of 2.0 meters, and the weight of the pvc flooring will be 90 kg per 30 sqm. as directed and approved by engineer in charge. etc complete. basic rate for vinayl flooring material- rs. 900/- per sq.m. 20 providing and laying vitrified mirror/glossy/matte finish tiles of size 590 mm to 605 mm x 590 mm to 605 mm with a thickness of 8 to 10 mm, conforming to is 15622:2006 (group b1a) from an approved make, shade, and pattern, for dado and skirting in the required positions. the tiles shall be fixed in 1:4 cement mortar, including neat cement float, filling of joints, curing, cleaning, and all related work, etc., complete. basic rate for tile material- rs. 790/- per sq.m. 21 providing second-class burnt brick masonry with conventional/i.s. type bricks in cement mortar 1:6 in the superstructure, including striking joints, raking out joints, watering, scaffolding, and all related work, etc., complete. 22 lowering the debris obtained from breaking and removing cement plaster/burnt brick masonry from the first floor by any means, without causing dust nuisance or damage to the structure. the debris shall be stacked as directed by the engineer-in-charge, including cleaning the site, etc., complete. (lead up to 100 meters.) 23 removing and disposing of debris from the site to a dumping ground outside the vjti premises (in accordance with municipal rules), etc. complete. as directed by the engineer-in-charge. (minimum 6 cu.m debris per trip) 24 providing anti-termite treatment to the wooden frames of doors and windows of the existing building as per i.s. 6313 (part-iii), by drilling 6 mm dia. holes at the four corners on one side and the four corners on the other side, at a downward angle of approximately 45 degrees at the junction of the woodwork and masonry. injecting 150 ml of chlorodane 5% w.c. into each hole and sealing with putty, etc., complete, with a 2-year guarantee on bond paper. 25 providing and applying waterproof melamine polish of the required finish to the woodwork by spray machine, including knotting and preparing an even surface by scraping, applying french polish, scaffolding if required, etc., complete.note: the work is to be executed only with prior approval from the superintending engineer. (brands such as asian paints, mrf melamine or equivalent.) etc. complete. 26 providing and fixing ss t/u/l strip profiles for walls, ceilings, tiles, flooring, main doors, interior decoration, bathrooms, and living rooms, including transportation, wastage, labor, etc., complete.shape: t/u/l profilematerial: ss 304 grade stainless steeldimensions: 8 mm to 12 mmlength: 2440 mm (8 feet), 3048 mm (10 feet)type: t-sectionfinish: polishedposition: interiorcolor options: gold, rose gold, black, silver, champagne, antique hairline, antique copperthickness: 2 mm to 8 mmnote: the shape, pattern, color, and design will be directed by the architect/consultant/or engineer in charge. basic rate for material- rs. 850/- per number. 27 providing and fixing ss t/u/l strip profiles for walls, ceilings, tiles, flooring, main doors, interior decoration, bathrooms, and living rooms, including transportation, wastage, labor, etc., complete.shape: t/u/l profilematerial: ss 304 grade stainless steeldimensions: 16 mm to 32 mmlength: 2440 mm (8 feet), 3048 mm (10 feet)type: t-sectionfinish: polishedposition: interiorcolor options: gold, rose gold, black, silver, champagne, antique hairline, antique copperthickness: 2 mm to 8 mmnote: the shape, pattern, color, and design will be directed by the architect/consultant/or engineer in charge. basic rate for material- rs. 850/- per number. 28 providing and fixing sign boards foor doors:specification for waterproof signage boards (12 x 4 inch)size: 12 inches (l) x 4 inches (h) (with size tolerance is plus or minus 1%)material: high-quality, durable acrylic or pvc boardfinish: glossy or matte finish for clear readabilitywaterproof: weather-resistant, suitable for both indoor and outdoor usedesign: custom text, graphics, or logo engraving/printingmounting: wall-mountable with adhesive backing or screw mountscolors: available in multiple colors with contrast for visibility (e.g., white, black, silver)application: ideal for office cabins, rooms, labs, and other signage needsthis durable, waterproof signboard ensures clear and professional signage in various environments. including wastage, etc. complete. basic rate for material- rs. 460/- per number. 29 providing and fixing of 3d wall panels that can be painted as well.size of each panel: 2 x 2 feet.colour: any color, design, or pattern.features: lightweight, fire-resistant, easily diy, 100% recycled.made from natural bamboo plant fiber, etc., complete. basic rate for material- rs. 450/- per number. 30 providing and fixing wooden decorative fluted wall panels/louvered wall panels:material: high-quality wood (mdf, plywood, or hardwood) with a decorative veneer finish.dimensions: 8 feet x 4-5 inchesthickness: 8 mm - 12 mmdesign: fluted design with vertical or horizontal grooves for a decorative effect.color: multicolor/any colour. (customizable to match interior themes).shape: rectangular panels for seamless installation, etc., complete. basic rate for material- rs. 850/- per number. 31 providing and fixing machine cut mirror polished 16 mm to 20 mm thick telephone black / amba white / cat bary brown / rbi red / ocean brown granite stone partition with rounding the edges etc. complete. one side polishbasic rate for granite material- rs. 2530/- per sq.m. 32 providing and fixing oval-type under-counter wash hand basin of 16-inch x 22-inch size and of special color shade, having telephonic black/colored granite of 180mm thick stone black kadappa framework, including chromium-plated coupling bottle trap. the wash basin should be of cera company or equivalent, model no. 3448, as per the detailed drawing or as directed by the engineer-in-charge, etc., complete. (counter size 1.20m x 0.60m). (brands such as jaquar,kohler or equivalent make.) basic rate for wash basin - rs. 6000/- per number. 33 providing and constructing a granite kitchen platform with the installation of a stainless steel sink (600mm x 450mm) as per the detailed drawing, including vertical polished kadappa stone supports (25 to 30mm thick) on both sides, with a kadappa top (35 to 40mm thick) and a polished granite top (16 to 20mm thick). the platform will feature granite strips at the front and both sides, with two vertical granite supports (15 cm height). the top granite will be 75 cm x 40 cm, including cutting and opening for the sink of the required size in both kadappa and granite. the platform size is 5.00 m x 0.60 m, with a height of 0.75 m, etc. complete with all required finishing. basic rate for ss sink- rs. 6000/- per number. 34 supply and installation of 600x600mm modular metal perforated grid ceiling system (cg-01)the ceiling system shall be supplied and installed as per the specifications provided in the tender document, and in accordance with the directions and approval of the engineer-in-charge. the scope includes complete installation with all necessary materials, components, and finishing to ensure proper execution etc. complete. 35 providing and installation of aluminum frame works for partition with ply on both sides and laminate finish: providing and fixing partition aluminum frame work consist of 25mm x 50mm x 1.2mm thick extruded aluminium box section framework at spacing not exceeding 600mm centre to centre both ways (horizontal and vertical). the framework shall be secured at floor structural ceiling and sill/ lintel level with 25 x 50mm x 1.2mm thick horizontal aluminium section. framework to be secured to floor / walls / columns / ceiling / beams using 75mm metal screws and dowels.acoustic infill: providing & fixing acoustic insulation of approved make to g.i./ aluminum/ ms/ wooden frame partition of 50mm thick rockwool of density 48 kg/m with blanket wrapped in rp tissue suitably affixed to partition framework using where necessary gi binding wire duct tape as indicated in the drawing.outer skin:- providing and fixing 18mm plywood of brands like greenply, century or equivalent. finished with 1 mm thick laminate of approved shade applied on plywood of brands like formice, royal touche or equivalent brand.note: rate is as per aluminum framework with both side ply and laminate. etc. complete. 36 providing and fixing of laminate cladding with ply backing:providing and fixing 12mm bwr plywood (brand: greenply, century, or equivalent), directly fixed to the column. a 1mm thickness laminate of an approved shade, applied on the plywood surface. laminate brands: formica, royal touche, or equivalent. etc complete. 37 providing and installation of glass partition (toughened glass): providing 12mm toughened fixed glass partition including all patch fittings, ensuring smooth and even flush joints between glasses, fixing the same in positions to true line and level, finishing the wall joints with clear silicon sealants, cleaning the surface and ensuring that there are no scratch marks on the glass etc. complete as per drawing and specifications, glass brands should be dorma, ozone or equivalent. 38 providing and installation of glass partition (dgu glass): double-glazed unit glass with air spacer of 6 to 16mm, 95% transparency, etc. complete as per drawing and specifications, dorma or ozone or equivalent. 39 providing and installation of 12mm thick clear toughened glass door with film as required. (d2 - 0.91 x 2.10 m) specification:hardware: door to be complete with hardware to each leaf as follows: hinges: 8 nos. ss ball bearing butt hinges. door closer: concealed door closer with hold open. lock set: dead lock as approved.door handles:900mm ht. 36mm dia d type offset handle on both sides in approved powder coating. door stop: floor mounted door stopper as approved seals: drop down floor seal as approved. security system: na note: all the metal profile sections and hardware finish should match the frame. brands like dorma or ozone or equivalent. etc. complete as per drawing and specifications. 40 providing and installation of d1 - double door two-way sliding motorized door, suitable for door openings up to 1.20 meters with a maximum door weight of 100kg (both leaves). the door offers environmental protection with a working temperature range of -20°c to +50°c and is rainproof. it has a standard opening time of 3-8 seconds, with a remote control operating distance of 100 to 200 feet (depending on line of sight). the opening size is 2.4m x 2.10m, and the glass door size is 1.2m x 2.10m. brands like dorma, ozone, or equivalent, to be installed as per drawing and specifications. etc. complete. 41 providing and installation of d3 - 1.09m x 2.10m (single shutter) 12mm toughened glass door with fixed side panels, including all patch fittings, locking mechanisms, and ensuring smooth, even flush joints between the glass panels. the door is to be fixed in position to true line and level, with wall joints finished using clear silicone sealant. the surface should be cleaned and inspected to ensure there are no scratch marks on the glass. installation to be completed as per drawing and specifications, with brands like dorma, ozone, or equivalent. etc. complete. 42 pop punning: providing and applying of plaster of paris punning(1st quality isi approved pop) over plastered with minimum thickness of 8mm-12mm to existingwall surfaces, ceilings & concrete members etc., to be finished in line and plumb with smooth surface ready to receive paint base. rate to be inclusive of edge protection (gi), fibre mesh for service conduits,hacking wall surfaces for better bonding, cleaning, scrubbing the surface, providing grooves if necessary etc., complete as per architects/consultant/engineer-in-charges approval. brands like gyproc, armstrong, shera or equivalent etc. complete. 43 plastic emulsion paint (leed compliant, low voc): providing and applying plastic emulsion paint finish to walls, partitions, and ceiling surfaces of approved make, color, texture, and shade in two coats, with surface and finish acceptable to the engineer in charge to be achieved within these two coats. any additional coats, if required, shall be at the contractors cost. the work includes preparing existing surfaces by scraping away loose particles, dust, etc., washing and scrubbing, filling cracks with crack filler and binder, cleaning and making the surface dust-free, applying water-based rj london putty as directed, rubbing with sandpaper to smooth the surface, and applying one coat of primer as recommended by the approved paint manufacturer. the work also includes providing necessary scaffolding, cleaning, and protecting the site until handover, as well as masking and protecting all service devices such as switchboards, detectors, etc. the work is to be completed at all heights and leads, as per specifications or as directed by the architect/engineer in charge/consultant. brands like asian paints, berger, or equivalent are acceptable. etc. complete. 44 providing and applying premium decorative wallpaper high-end or custom designs (special finishes, custom patterns)specifications: material: non-woven fabric or vinylroll size: 21 inches wide x 33 feet long (covers 55 sq ft)pattern: various styles (floral, geometric, etc.)finish: matte, gloss, or texturedinstallation: peel & stick or pastefeatures:scratch & water-resistanteasy to clean (wipeable)fade-resistanteco-friendly, voc-freeideal for: living rooms, offices, and accent wallsmaintenance: clean with a damp cloth, no harsh chemicalscustom options: available in various colors and patterns, custom designs upon request. basic rate for wallpaper rs. 600/- per sqm. 45 standing platform (300-450 mm from ffl):construction of a standing platform at a height of 300 mm to 450 mm from the finished floor level (ffl), as per approved dimensions. the platform will be made of 18 mm thick wood (century, greenlam, or equivalent) and finished with wood polish (asian paint wood tec, mrf, or equivalent).materials:frame: mild steel or aluminum, powder-coated for corrosion resistance.surface: high-quality plywood, mdf, or approved materials with a non-slip finish.support: sturdy metal beams or supports for stability.features:height: 300 mm to 450 mm from ffl, as per design.finish: non-slip surface with smooth edges and protective coating.safety: non-slip tread and optional guardrails. etc. complete. 46 stage flooring: supply and installation of interlocking rubber tile flooring at the stage area as per the specifications and drawings provided. the flooring will consist of a 6.0 mm synthetic sport surface, including a =1.50 mm pur protect® treated vinyl surface layer, calendared and grained, supported by a pvc density single closed-cell foam, and reinforced with a fiberglass grid structure. it will feature sanosol treatment for fungistatic and bacteriostatic properties. the flooring will meet the following standards: weight: 3.7 kg/m², impact resistance (en 1517) =8 n/m, abrasion resistance (en iso 5470-1) =350 mg, shock absorption (en14808) =25% (labosport result = 28%), indentation resistance (en 1516) =0.5 mm, ball bounce (en 12235) =90%, vertical deformation (en 14809) =3.5 mm, sliding coefficient (en 13036-4) 80–110, fire (en 13501-1) cfl-s1, anti-viral activity (human coronavirus 229e) – iso 21702 (99.37% after 2 hours), energy return (nf p 90 203) =0.31 m/s, tvoc after 28 days <100 micrograms/m³ (iso 16000-6), floor score®, ce marking, en14904 compliant for multi-sports use, reach compliant, and singapore green label certified. the supply and installation will include making good any damaged surfaces using standard fillers such as birla white cement, cement-based grout, epoxy grout, or mortar, and repainting to match the color.all work will be completed in accordance with the specifications, design, drawings, and the direction of the engineer-in-charge. 47 providing and fixing of overhead storage as per the specifications and drawings provided in the tender document. etc. complete. 48 providing and fixing of surface storageas per the specifications and drawings provided in the tender document. etc. complete. 49 providing and fixing on-site a lab table as per the specifications and drawings provided in the tender document. etc. complete. 50 providing and fixing of office desk/table in faculty lounge as per the specifications and drawings provided in the tender document. etc. complete. 51 providing and fixing of office desk/table in office for hod as per the specifications and drawings provided in the tender document. etc. complete. 52 supply and installation ofhod cabin chair as per the specifications and drawings provided in the tender document. etc. complete. 53 supply and installation of faculty lounge chairs as per the specifications and drawings provided in the tender document. etc. complete. 54 supply and installation of study chairs for labs as per the specifications and drawings provided in the tender document. etc. complete. 55 supply and installation of foldable desklet tables for the seminar hall as per the specifications and drawings provided in the tender document. etc. complete. 56 removingthe exisitng light fixures, fans, wires, cables, swith boards and distribution boards etc. complete. 57 point wiring for independent plug, concealed type in min 20 mm isi marked hms pvc conduit with 1.5 sq.mm (2+1e) fr grade copper wires, modular type switch and socket, earthing and required accessories as per specification no wg-pw/sw. (brands for conduits precision/finolex/pressfit. and for cable barnds should be polycab/finolex/havells. etc. complete 58 point wiring for independent plug, concealed type in min 20 mm isi marked hms pvc conduit with 2.5 sq.mm (2+1e) fr grade copper wires, modular type switch and socket, earthing and required accessories as per specification no wg-pw/sw. (brands for conduits precision/finolex/pressfit. and for cable barnds should be polycab/finolex/havells. etc. complete 59 supplying and erecting flush type shockproof plug socket 6a & 16a (6 pin) with 16a / 25a switch combined with indicator lamp and fuse with gang box on wooden board.make /brand (roma/ legrand,/ greatwhite) etc. complete 60 supplying and erecting isi mark modular type 3 pin 6a / 16a multi socket with safety shutter, duly erected on providedplate and box with wiring connectionsetc.complete. brand : roma/gretwhite/legrand) etc. complete 61 supplying and erecting pvc surface modular double mounting plate 3 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) 62 supplying and erecting pvc surface modular double mounting plate 4 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 63 supplying and erecting pvc surface modular double mounting plate 6 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 64 supplying and erecting pvc surface modular double mounting plate 8 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 65 supplying and erecting pvc surface modular double mounting plate 12 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 66 supplying and erecting regular/ standard model ceiling fan of 1400mm with sweep complete erected in position as per specification no. fg-fn/cf brand /orient/polycab/crompton etc. complete 67 supplying and erecting flush-type ceiling fan regulators and electronic step regulators for ceiling fans (600mm, 900mm, 1200mm, and 1400mm sweep), complete with installation on the provided switchboard. make/brand: roma, legrand, or greatwhite. 68 providing and fixing 36 watt 2x2 light fitingsupplying and erecting square shaped crca /die-cast aluminium powder coated housing led panel light (slim edge-lit) 600x600mm suitable for 36 w-40w includingmotion sensor led light with provision for plane front frame with translucent cover fixed to the housing etc.complete .brand philips/havels/wipro etc. complete 69 supplying and erecting 16 to 32 a dpmcb suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 70 supplying & erecting triple pole and neutral distribution board (tpndb), 3 pole/4 pole mccb as incomer & outgoing sp mcb (24 poles) or tp mcb of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb1 (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 71 providing & erecting 3 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/tripalarm contact. mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 72 supplying, erecting & commissioning 4 pole rccb 63a, electromagnetic type with 30/100/300 ma sensitivity with earth leakage trip indication complete as per specification no. sw-rccb/rccb. (make/ brand: legrand/ schneider/ l&t/ indo asian) 73 supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with fr pvc, conforming to itd specification s/ws 113c laid in provided pvc casing capping/conduit as per specification no. wg-tw etc. complete. cables brands should be polycab/finolex/havells. etc. complete 74 supplying and installing cat-6 cable suitable for networking as per specification no. wg-coc/nc. cables brands should be polycab/finolex/havells. etc. complete. 75 supplying & erecting mains with 2 x 2.5 sq.mm. and earth wire 1.5 sq.mm frlsh pvc copper wire in hms pvc conduit min. 20mm dia. as per specification no: wg-ma/pc.etc complete. brand :polycab/finolex/havels) etc. complete 76 supplying, erecting & terminating xlpe armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 swg) g.i. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.cb-lt/cu(brand: polycab/ finolex/ havells)note - the quantity of wires for looping the required number of air conditioning units has to be calculated by the contractor with respect to the provided architectural working drawing. etc. complete 77 providing & erecting hot dipped galvanised cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) gi sheet of 150 mm width & 20 mm height complete with necessary hardware. cable tray brands should be profab or equivalent. etc. complete 78 supplying and erecting pvc box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification no: wg-ma/box. etc. complete (make/ brand: legrand/ schneider/ l&t) 79 supply & fixing of aluminum box section to be laid on the floor with all excavation, re-cementing & refinishing civil works to make good in line with the existing floor level respective junctionbox to be fabricated in 16 swg gi sheet with cut out as required for terminating the box sections. shall include pvc conduits from jb to work station powerpoints i)150 x 150x 50 mmgijunction box with cover & cut outs etc. complete. (make/ brand: legrand/ schneider/ l&t) 80 supply of a.c split unit (2 ton) :supply of ac split unit as per the specifications, and drawings provided in tender document. make (carrier/ voltas/ bluestar/ samsung) etc. complete 81 supply of 2 ton casatte ac:2 ton inverter casette ac. cooling capacity 3200-8000 watt. offers uniform 360 degree round airflow, with 4 star energy rating. etc. complete. make (carrier/ voltas/ bluestar/ samsung) etc. complete 82 installation of 2 ton ac split unit etc. complete 83 installation of 2 ton ac cassette unit etc. complete 84 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigerant having 22swg thickness and inner dia/size 22mm complete. etc. complete. material selection should be high quality and from reputed brand as directed by engineer in charge. 85 supply & installation electrical communication cable between indoor to outdoor units.cables brands should be polycab/finolex/havells. etc. complete. 86 providing and fixing in position ms frame stand for a.c. units, floor or wall mounted, with vibration isolation pads and frame to be made out of required ms sections strong enough to hold the weight of the ac unit,and should be lockable, including fixing in position using necessary scaffolding, ladder etc, and painting with two or more coats ofapproved enamel paint on a coat of red oxide etc. complete 87 insulated condensate water drain piping constructed out of pvc / hdpe hard pipeswith 6mm thick nitride insulation, fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors fasteners and concealed in brickwork or flooring. etc. complete(make: finolex/ astral/ prince) 88 supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided pc / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/ac system. etc. complete. material selection should be high quality and from reputed brand as directed by engineer in charge. 89 supplying & erecting crca sheet metal enclosures of 1.2mm thickness with 20a, 2 pin plug & earth socket and 20a, 3 pin plug top with 20a/30a single pole mcb having rated short - circuit breaking capacity (icn) 10ka complete erected on angle iron/ gi frame. etc. complete 90 carrying out core cutting of size 3 to 5 dia x 15 length in the c.c./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. etc. complete 91 supply and installation of roller blindsas per the specifications and drawings provided in the tender document. etc. complete. basic cost for blind cloth fabric material rs.900/- per sq.m. 92 carrying out test for ceramic tiles / vitrified tileswater absorption, modulus of rupture (set of 6 tiles) etc. complete. 93 carrying out test for plywood: determination of resistance to dry heat,determination of moisture content,determination of density,thickness of plywood. etc. complete. 94 carrying out test for test for glue adhesion for plywood etc. complete. 95 carrying out test for hollow / solid /aac blocksdensity test. (set of 3 blocks), compressive strength. (set of 3 blocks), water absorption test (set of 3 blocks) etc. complete. 96 providing and fixing 15 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 97 providing and fixing 20 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 98 providing and fixing 25 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 99 providing and fixing on walls/ceiling/floor 32mm dia cpvc pipe with necessary fittings, remaking good the demolished portion, etc., complete. including removing existing pipeline if necessary and conveying and stacking the same in pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 100 providing and fixing 75 mm dia stabilizer pipe/p.v.c. soil vent/waste pipe with necessary fixtures and fittings, such as bends, tees, single junctions, slotted vent, clamps, etc., complete. 101 providing and fixing 100 mm dia stabilizer pipe/p.v.c. soil vent/waste pipe with necessary fixtures and fittings, such as bends, tees, single junctions, slotted vent, clamps, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 102 providing and fixing 10 cm pvc nahani trap with grating, etc., complete. (brands such as astral, finolex, prince or equivalent make.) basic rate for nahani trap is rs. 380/- 103 providing and fixing c.p. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. basic rate for pillar cock is rs. 1250/- per number 104 providing and fixing of exhaust fan 150mm crompton/havels/usha or equivalent etc. complete. basic rate for exhasut fan is rs.1000/- per number 105 providing and fixing stainless steel round napkin hanger for bathroom/towel holder for wash basin/napkin holder/bathroom (chrome) b. heavymaterial stainless steel product dimensions 17l x 5w x 19h centimetersfinish type chromeinstallation type wall-mounted shape round including fitting etc. completed.basic rate for material is rs. 320/- 106 providing and fixing premium front glass shelf - bathroom shelf/kitchen shelves wall mounted with frosted and toughen (tradition 6 x 18) chrome including fitting etc. complete. basic rate for material is rs. 650/- 107 providing and installation of 6 mm thick mirror with 6 mm thick ply backing, as per design. the mirror will be supported by stainless steel finished buttons, etc., complete. (the glass brand should be saint-gobain, borosil, or an equivalent make) basic rate for mirror is rs. 1250/- per sq.m. 108 supply and installation of nsd make smoke detectormodel:66a, certification: ce & ertl etc. complete. 109 supply and installation of nsd make heat detectormodel:66h, certification: ce & ertl etc. complete. 110 supply and installation of response indicator make: nsdmodel: p.s (mini) etc. complete. 111 supply and installation of manual call point (m.s) make nsd 112 supply and installation of 08 zone fire alarm panel make nsd(excel) etc. complete. 113 supply and installation of flasher hooter make nsdmodel no: ms17flash etc. complete. 114 supply and installation of supply & laying 1.0 sq. mm x 2 core copper armored isi cable for alarmsystem. with accessories per meter. brand/make :polycab/finolex/havellls) etc. complete. 115 supply and installation of high quality co2 fire extinguisher (6 kg)type:carbon dioxide (co2) fire extinguisher (for electrical fires and flammable liquids)capacity: 6 kgfire rating: class b (flammable liquids) class c (electrical fires)material: cylinder: steel or aluminum alloyfinish: red powder-coated for durabilityoperating pressure: 55 bardischarge time: approx. 8-10 secondsdischarge range: 3-5 feettemperature range:operating: -10°c to +60°c storage: -30°c to +60°cmounting: includes wall bracket certification: is 15683 (india) / ul/ce certified etc. complete.note: the rates for all fire safety alarm items include the complete supply, installation, commissioning, transportation, freight, and all associated costs. 116 providing architectural/ interior design services : scope of work as below:drawings preparation: 3d views, floor plans, furniture layout, electrical layout, ceiling layout, and partition layout.color scheme & material selection: guidance on colors and material choices for finishes, flooring, and furniture.quality control: ensure standards for structural, civil, electrical, fire safety, furniture work and hvac work.interior planning: optimize lab functionality and aesthetics, including furniture, partition design, and system planning (electrical, hvac, fire safety).modifications: suggest changes to designs based on site conditions and client feedback.coordination & monitoring: ensure project progress and timely completion by working closely with contractors. deputation of interior designer degree/diploma/certificate course having knowledge of autocad and 3d home or equivalent for the full period of the work. designes. monitor on-site execution, ensuring design adherence. taking joint measurements.preparing statements for extra items and excess quantities.compliance & safety: ensure adherence to safety codes and regulations. etc. complete.

Related Searched Keywords : pvc

List of pvc Tenders

Get pvc Tender Alert...

Related Searched Keywords : pvc

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us