Filters

List of rose-water Tenders

List of latest rose-water Tenders in Indian Tenders. Click on any rose-water Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for rose-water Tenders.

All-Tenders (18)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35614878 | 03 Nov, 2025

Tender Value : 5.25 Lacs

Krishna - Andhra Pradesh

Tender for gem bids for supply, stone aggregate 20 mm, stone aggregate 10 mm, coarsesand, cement, stone aggregate 40 mm, steel bar 08 dia, steel bar 12 dia, shuttering ply board, flyash basedprecast cement concrete solid bricks, ceramic glazed walltiles, anti skid floor tiles, cement based wall care putty, water thinnable cement primer, acrylic emulsion paint ofinterior grade, acrylic exterior paint, acrylic exteriorprimer, aluminium sliding door bolts, screw, aluminiumtower bolts, aluminium handles, aluminium ventilator ofsize 0.60x0.60 mtr with wiremess, pvc door with frame ofsize 0.76x 2.10 mtr complete, aluminium door with frameof size 1.20 x 2.10 mtr complete, aluminium window withframe of size 0.75 x 1.00 mtr, european type wc pan, flushing cistern, white cement, c.p brass hand showerhealth faucet, indian type w.c. pan, p trap, urinal basin, c.p. brass spreaders, g.i clamps for urinal, wash basin, c.p. brass pillar tap, brackets for washbasin, cp wastecoupling, p.v.c. waste pipe, looking mirror, ptmt towelrail, glass shelf, pvc pipe, ci chamber cover with frame, pvc socket, pvc elbow, cp jali, c.p. brass long body bibcock, c.p. brass angle valve, soap dish holder, p.v.c.connection pipe, cpvc pipe, clamps, cpvc solventcement, cpvc elbow, cpvc fta, cpvc tee, cpvc socket, gate valve cpvc, water storage tank, tank nipple, ppgisheet 0.50 mm, ppgi plain ridges 0.50 mm, ms squarepipe, angle iron, self driven screw, square plates, 10 mmbolts, single core copper cable, casing capping, battennails, modular switch, modular pvc gang box, pvc taperoll, pvc 4x4 box, ceiling rose, pvc battens holder, mcbbox, mcb, mcb dp, exhaust fan, led tube light, switchand socket combine set, wp wire 10 sq mm

Central Government/Public Sector

TRN :35607920 | 03 Nov, 2025

Tender Value : 14.08 Lacs

Kothagudem - Telangana

Tender for gem bids for cement , sand , 20mm stone aggregate , brick , acrylic exterior paint , acrylic exterior primer , water thinnable cement primer , acrylic distemper 1st quality , iron sheet size 5x1 06m , j or u hooks , ridge plain , single section steel , tile 600x600 mm , synthetic enamel paint , door with frame , 1200x1200 window , 8 mm dia bar , binding wire , 6 amp switch , 16 amp switch , 6 amp socket , 16 amp socket , 1.5 sq mm single core wire , 2.5 sq mm single core wire , casing caping 6 inch , modular stepped type fan regulator , 8 modular gi box with cover plate , 4 modular gi box with cover plate , ceiling rose , 6amp single pole mcbs , 16amp single pole mcbs , 63amp single pole mcbs , 12mm sweep 5 star rating ceiling fan , led light , contractors belder mistri bhisti blacksmith carpenter mason fitter electrician painter and labours charges for whole works

Central Government/Public Sector

TRN :35590801 | 17 Oct, 2025

Tender Value : 0

Alwar - Rajasthan

Tender for gem bids for aluminium door stoper , isi marked, aluminium door stoper , bath room mirror cabinet 350mm x 450mm best quality, door handle ms helical spring hinges best quality , door stopper alum 150mm best quality, door stopper alum best quality, flush washer set for low level cistern , flush washer set for low level cistern , frosted glass 4 ' x 3' x 3 mm thick best quality , frosted glass 4' x 4' x 4mm sheet glass best quality, glass pane 3mm thick 35 cm x 41 cm best quality, glass pane 3mm thick 49cmx51 cm best quality, glass pane 5 mm thick size 120 cm x 120 cm best quality, helical door hindle spring 300mm, helical door handle spring ms 300 mm, jumper valve brass for bib cock 15mm big best quality, jumper valve brass for bib cock 20mm best quality, jumper washer brass 20 mm best quality, jumper washer pvc 20 mm best quality, lakhana superior quality, legs for wall mixer completer set, legs for wall mixer completer set, m s bow handle 125mm , m s steel window handle 100mm (left) isi marked, m s steel window handle 100mm (right) isi marked, mirror of size 750mmx1200mm, 6 mm thick with fixing accessories., ms tank cover for pvc tank 500/1000 lit, ms tank cover for pvc tank 500/1000 lit, nails wire gi (reqd size and dia), plain glass 3mm thick 52cm x 27 cmcm best quality , plain glass 42 cm x 27 cmx 4 mm thick best quality, plain glass 51 cm x 30 cmx 3 mm thick best quality, ptmt ball cock 25 mm, ptmt float valve 15mm, ptmt shower rose round overhead 3", ptmt tank nipple 20mm , ptmt tank nipple 20mm , pvc bath shelf 12", pvc bend for low level cistern 90cm long 32mm best quality , pvc bottle trap for whb 31/32mm best quality, pvc coated ms curtain rods with bracket & rings 25mm dia 1mm thickness, pvc connection 375mm with nuts, pvc float valve complete set 15 mm for low level flushing cistern , pvc float valve complete set 15 mm best quality, pvc float valve 20mm size complete set, pvc lid for 500 ltr water tank, pvc pipe urinal with coupler (50mmx800mm), pvc sheet, 20 mm thick solid , pvc shyphone for low level flushing folcon , pvc shyphone set for low level flushing cistern , pvc shyphone set for low level flushing cistern , pvc washer for bib cock 15mm, pvc washer pipe 32mm, pvc waste coupling 32 mm , pvc waste coupling 32 mm , pvc waste coupling 32 mm , pvc waste coupling 38/40 mm , shelves corner pvc ( set of 3 pcs.) , soap dish holder oval pvc best quality , swivelling shower 15mm + shower arm 225mm pvc , syphone screw brass 03 nos of set, tank nipple 15mm pvc , toilet mirror & shaps size 48x18", waste pipe pvc for sink 32mm x 800mm long, waste pipe with 38/40mm with coupling, m s sliding bolts 300 mm best quality, aluminium sliding door bolt 250mm, aluminium sliding door bolt 250mm, change over switch (tpn) 04 pole current rating 63 amps, change over switch (tpn) 04 pole current rating 63 amps, change over switch 100 amp 4 pole, change over switch 160 amp 4 pole, aluminium alloy cold shrink cable joint kit 3 core x 120 sqmm model noxso-12, aluminium alloy cold shrink cable joint kit 3 core x 95 sqmm model no -xse-12, aluminium alloy cold shrink cable joint kit 3 core x 95 sqmm model no-xso-12, aluminium alloy cold shrink cable joint kit 3 core x 95 sqmm model no-xss-12

Central Government And Public Sector

TRN :35593552 | 29 Oct, 2025

Tender Value : 0

Ratnagiri - Maharashtra

Tender for gem bids for custom bid for services - total price for minimum wages including pf, overheads and site allowance: minimum 03 skilled out sourced manpower services for horticulture maintenance at kll for 2 years, qty 72 months (refer scc, sow and itb for detailed d.. , custom bid for services - total price for minimum wages including pf, overheads and site allowance: minimum 01 semi-skilled out sourced manpower services for horticulture maintenance at kll for 2 years, qty 24 months (refer scc, sow and itb for detai.. , custom bid for services - total price for minimum wages including pf, overheads and site allowance: minimum 06 unskilled out sourced manpower services for horticulture maintenance at kll for 2 years, qty 144 months (refer scc, sow and itb for detaile.. , custom bid for services - total price for bonus or exgratia at eight point three three percentage of minimum wages per month for 10 manpower services (for 2 years), qty lumpsum 1 (refer scc sow and itb for detailed description and more details) , custom bid for services - total price for esi employer contribution at three point two five percentage for 10 manpower services (for 2 years), qty lumpsum 1 (refer scc sow and itb for detailed description and more details) , custom bid for services - provision for leave with wages at four point eight one percentage of minimum wages per month for 10 manpower services (for 2 years), qty lumpsum 1 (refer scc sow and itb for detailed description and more details) , custom bid for services - provision for premium for group personnel accident insurance policy with a coverage of 5 lakhs and premium for pmjjby and premium for pmsby for 10 manpower services (for 2 years), qty lumpsum 1 (refer scc sow and itb for det.. , custom bid for services - total price for uniform cotton other ppes and safety gears for 10 manpower services (for 2 years), qty lumpsum 1 (refer scc sow and itb for detailed description and more details) , custom bid for services - total price for medical examination for 10 manpower services (for 2 years) qty lumpsum 1 (refer scc sow and itb for detailed description and more details) , custom bid for services - total price for supply of tractor trolley with diesel & driver and required manpower for 8 hours per day, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply and stacking of cow dung manure at site including royalty and carriage upto all lead as per the direction of eic, qty 800 kg (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of insecticides such as roger, cupper, fungicide etc as when as required basis banned insecticides not to be used by contractor, qty 25 l (refer scc, sow and itb for detailed description and more detai.. , custom bid for services - total price for supply of fresh lawn doob grass turf (size: 6 ft1 ft) with earth 50mm to 60mm thickness, qty 300 sqm (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of gardening shade net, thick and uv treated long life, with 90% shade (size - 1 m 1 m) colour - green, qty 1000 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of pvc pipe of size (3/4 inch) min thickness 3mm, qty 300 rm (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of drip irrigation pipe - 16 mm - elbow/tee thickness min 3mm, qty 100 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of drip irrigation pipe - 16 mm, qty 3000 rm (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of mini sprinkler for drip irrigation pipe, qty 1000 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of urea (50 kg - each bage), qty 30 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of ready made organic manure (50 kg - each bag), qty 20 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of frp/pvc pot-10 inch (with base plate), qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of frp/pvc pot-12 inch (with base plate), qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of pp/pvc pot-18 inch dia (with base plate) minimum height 3ft, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of pp/pvc pot -24 inch dia (with base plate) minimum height 4ft, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of wedelia, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of lantana, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of mini ixora, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of green ribbon grass, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of duranta golden/ yellow, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of clendendron, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of buogainvillia double /hybrid, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of mogra, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of chandani, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of mini erecta, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of tecoma creeper, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of hibiscus pink tip, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of hibiscus rosasinensis, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of miniature largestonia, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of dracaena red, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of budded rose (h t variety) 3 to 4 healthy branch 30 cm and above ht well developed with one and above flower plant, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of areca palm having ht 1 piont 50 m to 1 point 80 m with 6 to 8 suckers, well developed, fresh and healthy with lush green foliage, qty 50 each (refer scc, sow and itb for detailed description and mor.. , custom bid for services - total price for supply of supari palm having 2 to 3 m height with long, pinnate, crowded leaflets, seedlings should be of at least 2 years old, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of coconut palm having pinnate leaves 4-6m (13-20ft) long, and pinnae 60-90cm (2-3ft) long, old leaves break away cleanly, leaving the trunks mooth (seedlings should be of atleast 2 years old) , qty 50.. , custom bid for services - total price for supply of bottle palm, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of foxtail palm, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of cycas palm, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of spider plant, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of zz plant, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of lucky bamboo (dracaena sanderiana), qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of cordyline, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of chinese evergreen, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of vertical echeveria, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of kalanchoe, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of lotus seculant, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of basil (tulsi), qty 20 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of lemon, qty 20 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of lemon grass, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of ornamental plants, qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of gulmahor (seedlings should be of atleast 2 years old), qty 30 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of arjun tree (seedlings should be of atleast 2 years old), qty 20 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of water apple (seedlings should be of atleast 2 years old) , qty 20 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of amla (seedlings should be of atleast 2 years old) , qty 20 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of chiku (seedlings should be of atleast 2 years old) , qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of mango (seedlings should be of atleast 2 years old) , qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of kokam (seedlings should be of atleast 2 years old) , qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of jaam (seedlings should be of atleast 2 years old) , qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of kaju (seedlings should be of atleast 2 years old) , qty 50 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of all spices , qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of tejpatta, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of lavang, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of kalimiri, qty 25 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for cutting of grass, weeds etc upto height 2mtrs and its disposal to the designated place on daily basis by deploying tractor trolley including all labours, equipments etc, qty 800000 sqm (refer scc, sow and itb.. , custom bid for services - total price for cutting of grass, weeds etc upto height 2mtrs and its disposal to the designated place by deploying tractor trolley including all labours, equipments etc, qty 400000 sqm (refer scc, sow and itb for detailed d.. , custom bid for services - total price for cleaning of jungle incl uprooting of rank vegetation, trees etc of girth upto 30cm height of 1m above ground level and its disposal by deploying tractor trolley incl all labours equipment etc, qty 4000 sqm (r.. , custom bid for services - total price for supply of mild steel single wheel hand trolley of standard size - 04 ft x 03 ft x 01 ft minimum capacity 200kg , qty 5 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of water tank- 2000l capacity make- sintex/suprime/aashirvad three layer, qty 2 each (refer scc, sow and itb for detailed description and more details) , custom bid for services - total price for supply of vertical garden frame work with planter (panels, pots with hooks) set of three pot within single panel, qty 500 each (refer scc, sow and itb for detailehd description and more details)

State Government

TRN :35578449 | 18 Oct, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for ajwain 1kg, almond 1kg, magaj 1kg, kismish 1kg, pistagreen 1kg, kaju whole 1kg, dry apricot 200 gm, kaju 4pcs 1kg, haldiram salted peanuts 200gm, walnut giri 1kg, saffron kesar 01 gm, jaggery blocks 1 kg, jam 5kg, nutellachocolate spread 750 gm, nutella chocolate spread 350gm, tata tea gold 1kg, dal moong wash 01 kg pack, roasted chana dal 01 kg pack, dal urad chilka 01 kg pack, dal urad wash 01 kg pack, dal urad whole 01 kg pack, dal arhar 01 kg pack, dal black malka 01 kg pack, dalchana 01 kg pack, dal rajma 01 kg pack, dal moongwhole 01 kg pack, dal red malka 01 kg pack, dal lobhia01 kg pack, dal moong chilka 01 kg pack, dal black chana01 kg pack, dal kabuli chana 01 kg pack, atta flour 50 kgbag, besan 01 kg pack, black salt 1kg, boondi 200 gm, jay phal 1kg, small elachi 1kg, black elachi big 1kg, blackpepper whole 1kg, cloves 1kg, cinnamon stick 1kg, cornflour ararot starch for soup 1kg, coriander seeds 1kg, javitri whole 1kg, dabur kewra 250 ml for biryani, maida50 kg bag, soyabean chunks 1kg, lizzat papad 200gm, saunf moti 1kg, suji barik 1kg, white matar 01 kg pack, mustard oil 01 liter pack, mix pickle 5kg, honey real 1kg, refined oil 15 liter tin, white oats 1kg, prunes 200 gmpack, sweet soda 1kg, tata tea 1kg, horlicks 1kg, staranise 1 kg, corn flakes between 400 gm-500 gm, cornflakes 800 gm-1 kg, chocolate syrup 623gm, khus khus1kg, dabur gulabri zaika 250ml, rose water flavoringagent liquid, baking powder 1kg, bournvita 1 kg, roastedvermicelli 900gm, pulse candy between 500 gm-700gm, sugar 50 kg, red chilli whole 1kg, white till 1kg, tejpatta 1kg, aamchoor whole 1kg, methi dana 1 kg, wholejeera 1kg, anar dana whole 1kg, idli rawa 1kg, vermicelli400gm to 500 gm, chirwa poha 500gm, makhana 1kg, staff biscuits rs. 10 pkt, salt 01 kg pack, mustard seeds1kg, chill pickle 1kg, reetha 1kg, pancake mix 1 kg pack, rang kat 1kg, dalda ghee 1 ltr pack, custard powder 500gram pack, roohafja 750ml, maggi 560 gm pack, hing 50gm pack, imli seedless 1kg, misri dana 1kg, saunf barik1kg, colour yellow bush 100gm, colour green bush 100gm, colour red bush 100gm, chocos between 700gm-900gm, chocos 1 kg pack, peri peri seasoning between 90gm-110gm, stone flower 1kg, bel sharbat 500ml, ratanjotmasala powder 1kg pack, chironji 1kg pk, fig dry 1kg pk, pizza seasoning 1kg pk, white rajma 1kg, black chana big1kg pk, susi rice 1kg pk, dry oregano herbs 1kg pk, fivespice powder 1kg pk, chili flakes 1kg pk, black sesamesseeds 1kg pk, pipil powder 1kg pk, rice flour 1kg pk, yellow chilli powder 1 kg pack, plain idli rawa ricesemolina 1 kg pk, sahi jeera, salt sachet 1 gm sachet, black pepper powder 1 sachet, oregano 1 gm sachet, chilliflakes 1 gm sachet, sugar free 100 sachet pack, peanutbutter 1 kg, coconut powder 1 kg, milk maid 380 gm to400 gm, maggi seasoning sauce 200 gm, kellogg mueslifruits and nuts 750 gm pkt, kellogg muesli fruits and nuts500 gm pkt, daliya 500 gm, taj mahal tea bag pack 100pcs sachets, tetley masala tea bag pack 50 pcs sachets, nescafe coffee powder 500 gm pack, green chilli sauce700gm, sabut kashmiri mirch whole

Central Government/Public Sector

TRN :35578518 | 20 Oct, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for gem bids for misc, bid number gem2025b6743892 dated 09-10-2025 bid document1 36 1 1 two core armoured xlpe cable of size 10x2 sqmm, pvcinsulated pvc sheathed electric cable 6x2 sqmm 1100 volts6x2 sqmm, pvc insulated multistranded copper conductorcable of 2.5 sqmm single core, pvc insulated aluminiumconductor cable of 10 sqmm single core, led tubelightfitting 20 watt, led 2x2 fitting 36 watt make, call bell, batten backelite holder, condenser 2.5mfd make, dingdong door type bell, regulator for ceiling fan electronicsocket type, piano socket 6amp 3or 5 pin, gold uni socket6 or16 amp 6 pin code 1686, super gold switch 16a oneway, switch socket out combination unit 250 v 16 amp, gold super 3 in 1 6 or 16 amp switch socket combination, supply of air circulator turbo force wall fan of size 450mm, 11 kv indoor type resin casted metering currenttransformer of ration 100 or 5amps 10va accuracy class 0.5, energy saving led lamp 9 watt 230vac, ceiling fan 1400mm, ceiling fan 1200 mm, ceiling rose, led street lightfitting 90 watt, led street light fitting with ip 66 protectiontype for 150 watt, ht tape roll 25mm 30 inches long, plugand socket in sheet steel enclosure rating 30a tp, metalclad plugs type 2p plus e rating 20a 250 volt, frlsh pvcflexible cable copper conductor 1100 volts grade of size0.75 sqmm twin twisted, frlsh pvc insulated unsheathedindustrial standared cable copper conductor 1100 voltsgrade of size 1.5sqmm three core, pvc insulatedunsheathed wire single core copper conductor 1100 voltsgrade 1.5 sqmm solid, pvc flexible twin twisted copperconductor 1100 volts grade of size 1.00 sqmm three core, pvc insulated heavy duty armoured electric cables withcopper conductor working voltage 1100 volts 10 sqmm 4cores, pvc insulated sheathed flexible copper conductorcable three core of size 6.00 sqmm or 16 or 0.20mm1100volt, pvc insulated sheathed flexible copper conductorcable twin core of size 0.50 sqmm or 16 or 0.20mm1100volt, pvc insulated sheathed flexible copper conductorcable twin core of size 6.00 sqmm or 16 or 0.20mm1100volt, pvc insulated heavy duty unarmoured electriccables with copper conductor working voltage 1100 volts 10sqmm 4 cores, pvc insulated unsheathed cable single core2.5 sqmm 1100volt, led flood light of 60 watt, led floodlight of 80 watt, led high bay light of 150 watt, pvcinsulated and sheathed multistrand round 3 core copperconductor flexible industrial cable of 2.5 sq.mm of 1100volts, mcb sp 6-32 amp 10ka, mcb spn 32 amp 10ka, mcb tpn 63 amp 10ka, mccb 125 amp 25 ka, mccb 200am 25 ka, mccb 400 amp 50 ka, pvc insulated andsheathed multistrand round 3 core copper conductor flexibleindustrial cable of 10.0 sq.mm of 1100 volts, pvc insulatedand sheathed multistrand round 3 core copper conductorflexible industrial cable of 6.0 sqmm of 1100 volts grade, led tube of 36 watt, aluminium armoured cable xlpe 1100volts 50 sqmm 3.5 core, aluminium armoured cable xlpe1100 volt 95 sqmm 3.5 core, aluminium armoured cablexlpe 1100 volts 150 sqmm 3.5 core, electric water heaterwith safety five star rating as per bee standard capacity 25ltr, flexible connection pipe for geyser connection

Central Government/Public Sector

TRN :35578970 | 20 Oct, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for gem bids for bib cock cp 15mm, cp pillar cock 15mm bore, cp anglevalve 15mm, cp shower rose fancy type, cp towel ring, cptowel rail 60 cm long, cp telephonic showers, cp coupling32mm, cp swan neck pillar tap 15mm, cp bib cock 15mmshort body, cp bib cock 15mm long body, cp bottle trap32mm, cabinet mirror pvc, gi elbow 15mm dia isi marked, gi elbow 20mm dia isi marked, elbow reducing 20x15mm, gi socket isi marked for 15 mm dia pipe., gi socket isimarked for 20 mm dia pipe., gi bend 15mm dia isi marked., gi union 15mm isi marked, gi union 20mm isi marked, gitee 15mm dia isi marked, gi tee 20mm dia isi marked, hexa nipple gi 15mm dia isi marked, plug gi 15mm borepipe isi marked., kitchen plat rack of stain less steel overall size 31 x 30 x 10 inch, pvc ball valves 15mm bore ptmtwith epoxy coated aluminiumrod and high density plasticball, pvc ball valves 20mm bore ptmt with epoxy coatedaluminiumrod and high density plastic ball, pvc bib cockcobra series quarter turn suitable for 15mm dia bore pipe, ms sliding door bolt 300mm long and 16mm dia of bolt, al.tower bolt 150mm long isi marked, m s tower bolt 200mm long, galvanised ms wire cloth 0.56mm nominal dia ofwire and average width of aperture 1.18mm, ss aisi 304coloured coated sink with drainage board made out of 1mmthick steel sheet for kitchen 940mmx455mm with bowl size405mmx355mmx178mm, stainless steel aisi 304 colouredcoated sink without drainage board made out of 1mm thick495mmx420mm with bowl size 405mmx3550mm, plasticwater closet seat cover suitable for europian type wc, plastic water closet seat cover suitable for europian type, pvc low level flushing cistern 9 to 10ltr capacity, hydraulicdoor closer suitable for door size upto 1000mm max maxdoor weight 90 kg normal coloured, wall mixer withtelephonic or long bend arrangement with ligset and wallflange, without hand shower and tube brass c.p., vitreouschina coloured whb size 580mmx450mm, grating doom125mm dia with waste hole of ptmt, wall mixture set withhand shower, flexible pipe, adjustable wall, bracket, elbow, comply and over head shower set 15mm, cp brass, looking mirror 600mm x 450mm x 5mm beveled edge ofselected quality glass mounted on commercial plywood, basin single lever mixture swivel 15 pipe mm, cp wallmixture brass three in one for 15mm bore pipe with leg setand metal flange, floor door stopper aluminium superiorquality of size 100mm, pvc flexible waste pipe 32mm dia, pvc connections 15mm size with ptmt nuts of length450mm, rotational moulded polyethylene water storagetanks 500 ltr capacity, butt hinges ms 75mm isi marked, butt hinges ms 50mm isi marked, butt hinges ms 25mm isimarked, fevicol 1 kg pack make modi or pidilite, nail tackcut of size 20mm, nail 17 no, nails wire 30 mm, nails wire40 mm, nails wire 60 mm, screw wood steel 20mm, screwwood steel 12 mm, screw wood steel 60mm, screw woodsteel 25mm, screw wood steel 35mm, screw wood steel75mm, ply wood commercial size 7x3x12mm bwr

State Government

TRN :35557999 | 16 Oct, 2025

Tender Value : 30.35 Lacs

Jaipur - Rajasthan

Tender for "part-a (building work) based on bsr pwd - 2019, dausa earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " "pcc in foundation : providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)." random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:6 ( 1-cement : 6-sand). centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix supplying and filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. stone kharanja : random rubble dry stone kharanja under floor. brick work with clay flyash f.p.s. brick of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 6 (1 cement : 6 coarse sand) beam:- providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) providing and fixing m.s. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint extra for double leaf shutters. glazed windows : providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : windows side hung /ventilators top or centre hung (openable) supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars : providing and fixing square bars or other flat welded to window, ventilatiors etc. kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: . new work panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work door frames:-providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 100 x 75mm. p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia pipe clip 110mm dia providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.green / blackabove 3601 cm2 slabs providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). "part-b (sanitary work) based on bsr pwd - 2014, dausa circle p & f kitchen & lab. sink of approved make with c.i. brackets duly painted, 40 mm c.p. waste coupling, c.p. brass chain with rubber plug, 40 mm g.i. waste pipe up-to floor level complete including cutting and making good the wall & floor :wvc lab sink (is:2556 mark) size 530 x 430 x 180 mm " p & f chromium plated swan-neck laboratory cock of approved quality / make:one way p & f ball cock (is :1703 mark) with rod & p.v.c. ball complete :brass wt.400 gm,15mm. p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. c.p. inlet connection 15mm.brass (is : 8931 marked) p & f 15 mm. dia connection pipe of approved quality/make :(-do-) 450mm. p & f full-way valve (is:778 mark) or wheel valve of approved make :gun-metal 15mm nominal bore. p & f stop cock (is :8931 mark), superior quality & of approved make:brass 400 gm. 15mm nominal bore. p & f pvc storage tank isi marked (is : 12701) indicating the bis license no), of approved make with cover, 25mm dia 1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 (-do-) p & f g.i. pipes (external work) with g.i. fittings excluding union (is : 1239 mark) including trenching & refilling earth etc.15mm dia nominal bore'b' class p & f g.i. pipes (external work) with g.i. fittings excluding union (is : 1239 mark) including trenching & refilling earth etc.25mm dia nominal bore 'a' class construction of soakage well in all types of soil of approved drawing, top 90 cm .portion in 450mm thick masonry with cm 1:6, 80 mm thick stone slab covering, jointing of slab in cm 1:3 ,ralthal, kharanja 40mm thick m-15 grade c.c flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr . inner dia 90 cm & 10 to 12 mtr deep. "part-c (electric work) based on bsr pwd 2013, jaipur circle wiring of light point/fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is: 694) of approved make group-2 light point short point (up to 3 mtr.)" medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is: 694) of approved make in surface/reces group - on board s & f follwing sizes (dia.) of isi marked medium duty pvc conduit along with accessories in surface/ recessed using clamps, fastener as required including cutting the wall , covering conduit with wire mess and making good the same as required. group-2 25 mm dia "supplying and drawi;ng fr pvc insulated & unsheathed flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface ofr necessed conduit/ casting capping including making connections etc. as required. group-2 2 x 1.5 sq. mm" 2 x 2.5 sq. mm p & f 240/415 v mcb of breaking capacity not less than 10 ka (b/c/d tripping characteristic) isi marked is 8828 (1996)/conforming to iec 60898 in existing board/ sheets including making connections with lugs, testing etc. as required. group-2 6 a to 32 a rating p & f recessed/ surface mounting heavy duty horizontal type sheet steel distribution board phophatised/ powder painted complete with 100 amp copper copper bus bar, shorting link, neutral, earth link and din bar, conforming to is 13032 & is 8623 including making internal db termination with copper lux, testing etc. as reqd. . group-2 single door(single phase) 8 way p & f strip fluorscent tube fitting fabricated from (crca sheet and finished with powder coating/stove enamelled non corrosive uv resist ep channel) complete with accessories(low loss copperchoke, starter, starter seat)/electronic choke with terminal block duely prewired with copper conducter including making connection, testing etc. as required(without tube)1x36 watts with occb. group-2 p & f fluorscent tube rod in existing fixtures as required, minimum 3 star rating,36/40 watts p & f star rated double ball beari;ng capacitor start, aluminium body and blade ceiling fan with down rod upto 30 cm with 3x1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required.1200 mm sweep 3 star rated p & f is:371 marked 6 amp sufface type celling rose inculuding making commection testing etc. grup-2 (e071400) p & f isi marked 6 amp bakelite batten/ angle holder including making connextion testing etc as required p & f 18 swg ms recessed fan box, hexagonal/round of size 130mm dia, depth 75 mm , 12mm dia rad fan hook with 100mm length extended on eeach side. gourp-1 p & f 18 swg sheet steel boxes duly finisded with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surfacae or in recessed as required. 175 mmx 100 mmx60 mm

State Government

TRN :35558127 | 16 Oct, 2025

Tender Value : 7.36 Lacs

Jaipur - Rajasthan

Tender for "earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " p.c.c. in foundation providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement:4 coarse sand :8 gradeed stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in cement mortat 1:6 (1-cement: 6- sand) dpc:-providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required excluding the cost of centering, shuttering and reinforcement . m20 grade nominal mix/design mix. stone masonry in super structurerandom rubble stone masonry with hard stone in superstucture above plinth level and upto five level wall upto 30 cm and less thickness cement sand mortar 1:6 (1-cement: 6- sand) pillar masonary:-random rubble stone masonry with hard stone in superstucture above plinth level and upto five level for square or rectangular pillers cement sand mortar 1:4 (1-cement: 4- sand) supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 :upto 15 cm. thick. " beams:-providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. m20 grade nominal mix / design mix" centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. steel reinforcement:-p/f reinforcement for rcc work including straightening,cutting, bending, placing in position and binding (including cost of binding wire) all complete upto floor five levetmt bars (conforming of relevent is code). door frames:-providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 100 x 75mm. doors:-providing and fixing m.s. sheet 1mm thick double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint glazed window:providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] wire gauge supplying & fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars: p&f square bars or other flat welded to window/ventilators etc., guard bar 12 x12mm supplying and filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. stone kharanja: rr dry stone kharanja under floor kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete(for area of each slab upto 2001 sqcm) plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 20 mm thick plaster(ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) black board : plaster on new surface on wall in cement sand mortar 1:3 including raking of joints etc. complete fine finish: 12mm thick grading roof for water proofing treatment with water proffing compound: cement concrete 1: 2: 4 (1 cement: 2 course sand: 4 greded stone aggregate 20 mm nominal size) gola providing gola 75mm x 75mm in cement concrete 1:2:4(1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge) including finished with cement mortar 1:3(1 cement: 2 fine sand) as per standard design. "distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: new work (two or more coats) over and including scrapping and priming coat with cement primer." exterior finishing: painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: new work panting on doors & windows :- painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shade new steel work (2 or more coat on new work). copping: cement concrete flooring 1:2:4 (1 cement: 2 course sand: 4 greded stone aggregate) finishing with a floating coat of neat cement including cement slurry, making of lines or groove etc. complete but excluding the cost of nosing of steps etc. complete : 40mm thick with 20mm thick nominal size aggregate. making grooves as per design in plaster 10mm to 20mm wide. making of drip course (tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35558799 | 16 Oct, 2025

Tender Value : 22.20 Lacs

Jaipur - Rajasthan

Tender for earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils "pcc in foundation : providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)." providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).floor random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for foundation, footings, strap beam, raft, base of column etc centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for columns, pillers, posts,and struts etc "providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix / design mix add extra for providing richer mixes respectively at all floor levels providing m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix." "providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix / design mix" providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix add extra for providing richer mixes respectively at all floor levelsproviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earthfilling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. stone kharanja : random rubble dry stone kharanja under floor. brick work with clay flyash f.p.s. brick (is 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 6 (1 cement : 6 coarse sand) providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) providing and fixing m.s. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint extra for double leaf shutters. providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars : providing and fixing square bars or other flat welded to window, ventilatiors etc. kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m15 grade nominal mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete internal finishing: distempering with oil bound washeble distemper of approved brand and manufacture to give an even shade including all scaffolding new work (two or more coats) over and including scrapping and priming coat with cement primer finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry:size 125 x 100mm p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia pipe clip 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . "earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " "pcc in foundation : providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)." random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:6 ( 1-cement : 6-sand). centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix supplying and filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. stone kharanja : random rubble dry stone kharanja under floor. brick work with clay flyash f.p.s. brick of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 4 (1 cement : 4 coarse sand) beam:- providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) providing and fixing m.s. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint extra for double leaf shutters. glazed windows : providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : windows side hung /ventilators top or centre hung (openable) supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars : providing and fixing square bars or other flat welded to window, ventilatiors etc. kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: . new work panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work door frames:-providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 100 x 75mm. p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia pipe clip 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Related Searched Keywords : rose water

List of rose-water Tenders

Get rose water Tender Alert...

Related Searched Keywords : rose water

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us