Filters

List of rubber Tenders

List of latest rubber Tenders in Indian Tenders. Click on any rubber Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for rubber Tenders.

All-Tenders (414)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Local Bodies

TRN :49057309 | 27 May, 2025

Tender Value : 1.25 Crore

Bulandshahr - Uttar Pradesh

Tender for tender for over head tank industrial townshipat village kirra, khurja, district bulandshahr (up). - construction of over head tank of 1000 k.l. storage capacity at 22.50 m staging based on contractors own design and drawing including testing of tentative bearing capacity completed with 1.00 m wide r.c.c. staircase from ground level and stainless steel ladder from balcony to top of dome in balcony 1.00m high ss pipe railing over stair case .balcony and all around to dome made of three rows of 25mm dia g.i pipe medium class supported on. r.c.c. posts at suitable intervals i.e. 1.25mt.c/c or as directed by engineer in charge. including 4cm thick pcc flooring laid over 80 mm thick 1:4:8 cc and also 1.00m wide 40mm thick pcc apron around with 150mm semicircular drain with 1:2:4 mix ratio. supply & fixing of m.s. manhole cover with locking arrangement and fixed at the top of dome and supply of all materials. aluminium lightening conductor with extra arrangement of copper wire as per is 3043 latest edition laid in electricity department or as per latest isi specification. further to provide mosquito proof ventilator of approved quality & fixing at the top of dome as per direction by e/i further to provide water level; indicator with material and fixingthem at desired level connect and supply & hoist all c.i.d.f. 2 pipe2 nos of 200 mm dia inlet pipe, outlet pipe of 250 mm dia, overflow pipe of 250 mm dia & wash out pipe of 100 mm dia arrangement with ci df pipe of the general specification providing jointing material such as rubber packing with nut bolts and fix them after embedding in the bottom of the tank from the designed depth below g.l. including supply duck foot bend etc, inlet , outlet over flow and washout pipe arrangements with all fitting and to be painted, including cost of inlet, outlet, overflow, wash out pipes of required dia as per directed by e/i.and also including sluice valve etc. as required dia of outlet and inlet pipes with its chambers as requred sizes with ci cover and indication of sluice valve etc. complete.further to provide all material for supply of gate as per drawing with locking arrangements and painting with approved paint on complete structure with three coats of wheather coat of approved quality. and also mention the name of scheme and capacity of oht with enamel paint of size 4.00m x 1.50m and letter size not less than 45cm the rate should also include the design of overhead tank and water tightness of tank .structural design should be based on soil investigation report will done by contractor and consisting for specific load as per is 1893-1894 to latest revised specification if any complete with all respect. out let pipe size as per hydraulic design 250mm dia double flanged c.i.d.f pipe as per jal nigam specification structural design should follow the latest is code seismic provisions in the structural drawing & design should be checked through i.i.t/any other government institution as per approved by e/i and also including soil testing, design of structure, drawing etc will be in the scope of contractor all complete as per direction by e/i

State Government

TRN :49057509 | 24 May, 2025

Tender Value : 25.39 Lacs

Bhopal - Madhya Pradesh

Tender for tender for disposable surgical rubber gloves (v2) (q2) , single use rubber examination gloves (v2) (q2)

Central Government/Public Sector

TRN :49057816 | 03 Jun, 2025

Tender Value : 0

Sanp - Maharashtra

Tender for supply of set of rubber componentset of rubber component,set of rubber component for drivers brake valve type ed-6 str no. rdso/pe/str/emu/0 021 - 2008 [rev. 1] to drg no. tqka/245/r14. [ warranty period: 30 months after the date of deliver y ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] amm (carshed) sanpada, cr maharashtra 71.00 set

Central Government/Public Sector

TRN :49058864 | 29 May, 2025

Tender Value : 0

Kharagpur - West Bengal

Tender for supply of conical rubber thrust pad etc.conical rubber thrust pad etc.,conical rubber thrust pad to rdsos drg. no. skdl-2308 (alt.-1) & spec. no. irs r-63 f or axle box. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] electric loco in stores/bksc, jharkhand 530.00 numbers electric loco shed stores/kgp, west bengal 822.00 numbers

Central Government / Public Sector

TRN :49058972 | 21 May, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for supply of ioh kit for ep contactor filter on/off.ioh kit for ep contactor filter on/off.,ioh kit for ep contactor filter on/off. each set consists of 8 items and 12 nos: [1] conta ct 600 amps to aal pt. no.2220007100/03 -04 nos. [2] cartridge body assly to aal pt. no.222000710 0/04-01 no. [3] rubber o ring valve housing to aal pt no.2220007100/06 -02 nos. [4] rubber o ring piston sm to aal pt. no. 2220007100/07 -01 no. [5] rubber o ring cylinder sm to aal pt. no. 222000 7100/05 -01 no. [6] rubber o ring air conn to aal pt. no. 2220007100/08 -01 no. [7] seal piston sm t o aal pt. no.2220007100/09 -01 no. [8] rubber cap to aal pt.no.2220007100/10 -01 no. make/brand : aal. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]

Central Government / Public Sector

TRN :49059009 | 21 May, 2025

Tender Value : 0

Angul - Odisha

Tender for supply of o/h rubber kit of 3 items for tfp bushing to cee drg. no.loco/4/gk/097 alt.b. or latest.o/h rubber kit of 3 items for tfp bushing to cee drg. no.loco/4/gk/097 alt.b. or latest.,o/h rubber kit of 3 items for tfp bushing to cee drg. no.loco/4/gk/097 alt.b. or latest. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] els/angul, ecor odisha 39.00 set

State Government

TRN :49059083 | 15 May, 2025

Tender Value : 17.24 Lacs

Amroha - Uttar Pradesh

Tender for tender for re-electrification work of office building of state tax department (g.s.t) in dist.amroha. - rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/pvc conduit including dismantling as required. group c 2 supplying and fixing following size/ modules, gl box along with modular base & cover plate for modular switches in recess etc. as required.1 or 2 module (75mmx75mm) 3 supplying and fixing following size/ modules, gl box along with modular base & cover plate for modular switches in recess etc. as required.3 module (100mmx75mm) 4 supplying and fixing following size/ modules, gl box along with modular base & cover plate for modular switches in recess etc. as required.4 module (125mmx75mm) 5 supplying and fixing following size/ modules, gl box along with modular base & cover plate for modular switches in recess etc. as required.6 module (200mmx75mm) 6 supplying and fixing following size/ modules, gl box along with modular base & cover plate for modular switches in recess etc. as required.8 module (125mmx125mm) 7 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 a switch 8 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 5/6 a switch 9 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c 10 rewiring for twin control light point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/pvc conduit including dismantling as required. 11 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required.1x1.5sq. mm (for inverter wiring ) 12 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2x 1.5sq. mm + 1 x 1.5 sq. mm earth wire 13 same as above but for 2x 2.5sq. mm + 1 x 2.5 sq. mm earth wire 14 same as above but for 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 15 same as above but for 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 16 same as above but for 2x10 sq. mm + 1x6 sq. mm earth wire 17 same as above but for 4 x 16 sq. mm + 2 x 6 sq. mm earth wire 18 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 19 supplying and fixing single pole blanking plate in the existing mcb db complete etc. as required. 20 supplying and fixing suitable size gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required. 21 supplying and fixing suitable size gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 a modular socket outlet and 2 nos. 5/6 a modular switch, connections etc. as required. (for light plugs to be used in non residential buildings). 22 supplying and fixing suitable size gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required. 23 supplying & fixing suitable size gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, c curve including connections, painting etc. as required. 24 supplying and fixing 3 pin, 5 a ceiling rose on the existing junction box/ wooden block including connections etc. as required. 25 supplying and fixing pvc batten/ angle holder including connections etc. as required. 26 supplying and fixing call bell/ buzzer suitable for single phase, v, complete as required. 27 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way , double door 28 same as above but for 12 way , double door 29 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 4 way (4 + 12), double door 30 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer ) as required . 4way (4 + 12), double door 31 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole 32 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. double pole 33 s&f of 40 amp. sp mcb (10 ka)cat a 34 s&f of 40 amp. dp mcb (10 ka)cat a 35 s&f of 63amp. sp mcb (10 ka)cat a 36 s&f of 63amp. dp mcb (10 ka)cat a 37 s&f of 63amp. tp mcb (10 ka) c curve cat a 38 s&f of 63 amp. 4 pole mcb(10 ka)c curve cat a 39 s&f of 80to 100 amp4 pole mccb (16 ka)thermal magnetic release cat a 40 s&f of 160amp4 pole mccb (16 ka)thermal magnetic release 41 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 42 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. 43 supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation : b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (cmm/w) minimum 6.85, air delivery minimum 215 cmm, 350 rpm (tolerance as per is : 374- 2019), thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 44 installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 45 supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 2 x 10 sq. mm (19mm) 46 same as above but for 4 x 16 sq. mm (28mm) 47 same as above but for 3.5 x 70 sq. mm (38mm) 48 same as above but for 185 sqmmx3.5 core 49 supplyandlayingofaluminiumconductorpvcinsulatedarmouredservedsheathedcables1100volts gradeon wall/surface the cable run shall be fixedon m.s. clamps etc. of suitable size or asdirectedbytheengineer-incharge, completeinall respect.thearmouringofthecableshallbeproperly connected with the earth conductor by clamps etc.10 sq. mmx 2 core 50 same as above but for 16 sq. mmx4 core 51 same as above but for 70 sq. mmx3.5 core 52 same as above but for 185 sq. mm 3-1/2 core 53 supply, installation, testing and commissioning of lt panel vermin proof floor mounting , m.s. channelbase with bottom and fabricated out of 2.0/1.6mm thick crca sheet steel, painted with powder coated paint of shade as per the direction of engineer in-charge after proper sheet treatment process of sheet steel. the bus bar of panel shall be of electrical grade high conductive aluminum alloy of appropriate cross section as per rating.the main bus bar shall run throughout the panel of rating as main incomer rating. the bus bar shall be supported by non hygroscopic smc/dmc bus bar supports which shall be mounted on proper interval to ensure the bear the jerks of short circuit of 50ka for panels having acb as incomer & 36ka for panels having mccb incomers. panel shall be constructed in fully segregated compartment design for each feeder as per 3b construction format. the panel shall be completed in all respect as per is: 8623 part-2&3. there shall be separate metering compartment for incomer metering and outgoing metering.all incomer feeders shall be provided with multifunction metering along with phase indicating lights and other associated components such as ct, control mcb terminal block etc. and all outgoing feeders 100a & above shall be provided with 3 phase ammeter along with phase indicating lights and other associated components such as ct, control mcb terminal block etc. the feeders above shall be provided a accommodated all measuring instruments shall be digital type & all indicating lights shall be led type. wiring shall be done from 1100v grade pvc insulated copper flexible wire. all acb shall be electrically operated draw-out type with microprocessor based o/l, s/c & e/f release of breaking/ withstand capacity (icu/ics/icw) 50ka or more all mccb shall be thermal magneetic/microprocessor with o/l & s/c protection along with required spreaders & extended rotary handle with pad locking facility of breaking capacity (icu/ics) 36ka or more all mcb shall be thermal 10ka c curve. cubicle type switch board shall be cat-a and b only. incoming 400 amp mccb -1 no& outgoing 200 a mccb-1 no., 100 a mccb-2 nos. & 63 a mccb-1 no. 54 supply and fixing of 18-22w led batten fitting with extruded aiuninumn housing, special polycarbenate difluser for glare free light distnbution and suitable mounting for on both surface & suspended. compelete in all respect. 1980-2420 syslem lumens, >110 lm/w, pf>0.95, thd<10%, cri >80, with 3 year warranty. 55 supply and fixing of led tube light with heavy duty metal box type batten light fitting 2x22 watt suitable for upto 2x22 watt led polycarbonate tube light complete including tube suitable for both surface & suspended complete in all respect. 2x2640 sy stem lumens, >120 lm/w, pf>0.95, thd<10%, cri >80, sheet thickness min. 0.8mm, tube with aluminium heat sink. >300v over voltage protection, 2.5 kv internal surge protection, with 5 year warrantee cat-aaa 56 s/f of ip 20, front lit, mid power smd type led light, recesssurface mounting round 10 watt to 15 watt , cut out min 125 mm, height min 40 mm,, led down lighter having powder coated die cast aluminiun housing with heat sink, high purity transmisivity uv stabilized non yellowish diffuser reflector for unifom light distribution, detachable driver set, stable for 24 hr continous operation, complete in all respect 1100-1650 system lumen, >110 lm/w, pf>0.95, thd <10% at full loàd, cri >80, with 3 years warranty. 57 s/f of water tight oblong 10wled bulk head luminaire havingdie cast alluminium housingwithdriver set confirming to ip 65 and above protection ,suitable for 24 hrs. continuous operation,complete in all respect.1100 system lumens, 110 lm/w. pf>0.95, cri>70, with 3 year warranty.cat aa 58 supply and fixing of led street light fitting withmandatory driver set having die cast aluminium body with toughend glass/ uv stabilized pc cover and lenses suitablefor 75 watt. to 90 watt and confirming to ip 66, and ik07 and above protection having company logo engraved complete in all respect including labour.9000-10800 system lumens, high power led with lenses,120 lm/w, pf>0.95, thd <10% at full load, cri >70,,potted driver set in metal housing (not circuitory) phase to phase protection at 440v & >300v auto cut and re-startfeature, with 5 years warrantee. 59 s/f of led bulb 12 watt 60 supply of fresh air fan300 mm sweep metalic complete in all respect. 61 supply of heavy duty exhaust fan 300 mm sweep 900/1400 rpm 62 s&fof200amp.fourpolechangeoverswitchon50mmx 50mmx6mmangleironframe,includingthecostoflabour, t&p,paintingandothermaterialrequiredforproper completionoftheworkasperdirectionandsatisfactionofengineer in charge. 63 s/f of rubber matting1800x900x12 mm tested and chequred 64 supplyandfixingoffireextinguisher,abctype4.00 kg.capacity(isimarkedis: 15683& tacapproved) complete with initial charge and wall bracket, along with supply of all materials andlabour for proper completion of work. 65 supply andfixingofc02typefireextinguisher4.5kg. capacity (isimarkedis:2878&tacapproved) complete with initial charge and wall bracket, along with supply of all materials andlabour for proper completionof work.

Central Government/Public Sector

TRN :49059370 | 30 May, 2025

Tender Value : 0

Cuddapath - Andhra Pradesh

Tender for supply of elgi make screw compressor spares , consumable spares list , air filter element , oil filter , element separator (e90-160) , minimum pressure valve kit , intake valve kit (e132-160) , coupling element e90-160 , blow down valve kit , pressure transmitter , temperature sensor , air inlet system , nc intake valve 4 inch hpkg-120 , ss t bolt clamp jt6a20-dia 170 , elbow; rubber 6” , indicator: air filter clog , drive coupling,dia 80/60 , a/e pkg gr:1.326 axis 284 , connector; pvc hose 3/4 , steel reinforced pvc hose 60mm , after and oil cooler assy-e-160 , base assembly-e160 , bracket - airend , vertical tank e132-e160 , hose-3 inch discharge , bracket air filter assy , filter head 360 lpm machining , dia 550 pusher fan 400v , oil return line assembly , exhaust fan 6 sq 220v , pressure regulator prne , ball valve 3 , hose set e90-e160 wc (4nos) , filter assy. -360 lpm , fan dia. 42 with hub ee160 , steel reinforce pvc hose 20mm gre , o/c &a/c assy ee160 alu.coler , tank rec e90-e160 horizone , pipe assy mpv hose to cool , hose assy mpv to cooler , pipe with elbow assy , hose assy 1 1/2 tv to oil out , hose assy tv to oil in , pipe with flange assy , pipe tee assy , hose with metallic bellow 32nb , hose assy airend to tank , hose assy 1 1/2 tank to tee , air end package 1.11: 1 , steel reinforce pvc hose 10mm gre , steel reinforce pvc hose 20mm gre , steel reinforce pvc hose 50mm gre , control system of modele90- e160 , hex reducing nipple 1/4”(m) x 1/8”(m) , pr regulator , tms elbow ¼”x ¼” (t) , tee pipe¼ ” , tms coupling ¼”x ¼” (t) , hex nipple ¼” , connector hose adapter ½” , hose ½” x 1000l (e132-160) , tube ¼”2 mts , spares for compressor of modele132- e160 , base & drive system , anti vibration mount - e132- e160 , cooling and lubrication system 90-160 wc , o ring 54.2 x 47.2 x 3.5 , element, therm valve 155 deg , elbow tms 1 ½” x 1 ½” , tee; pipe; ¼” npt , pr transmitter 16 bar, 4.20 ma , filter oil , oil filter indicator , nipple; hex; ¼” npt , seperator element 1200 cfm , gasket flange 2” for e160-8 bar , mpv with check valve -mpvl65 , pr. releif valve , plug, hex 1 ½” npt , oil sight glass , nipple ; pipe; ¾” npt x 300 , elbow tms ¼” x ¼” npt , transparent tube 8x6 1.2 , coupling; tms; 1/4”x1/8” npt , o ring id 80.0x2.5 thick , hex nipple , tee pipe , pressure switch 0.2-7.5 bar , pressure guage , spares for compressor of modele75-85 , consumable spares list , neuron ii , air filter element , oil filter , element seperator , minimum pressure valve kit , intake valve kit , pr. regulator , coupling drive (or) coupling element , pressure transmitter , temperature sensor , hose assy-a/e to tank , blowdown valve kit , actuator kit , oil sight tube6mmx 4mm - 0.5m , ferrule 6 mm , pipe sets dis sys e75-horizon , pipe assy mpv to hose , hose assy mpv to cooler , pipe assy ms to ball valve , discharge hose , hose oil line , fan assy 23 inch , air inlet & control system , 5/8” x m10 bush reducer , intake valve – nc , hex nipple¼” x 1/8 ”npt , pressure regulator , tee branch ¼” x ¼” npt , tubing 6mm 1.5m , coupling tms ¼” x 1/8” npt , connector ½” npt , ss t bolt clamp dia 170 , connector rubber 6” , rubber hose duct connector , ss t bolt clamp , elbow ½” npt , elbow tms ¼” x ¼” npt , temp sensor , discharge system , ¼” tms elbow , minimum pressure valve , water seperator , hose mpv out to ac , scavenging line pipe , tms elbow ¼” npt , ¼” tms elbow , pressure releif valve – 1” npt , o ring , hex reducing nipple , assy strainer , tms elbow , hose assy – 80 nb , hex plug – 1” npt , oil sight glass tube 0.5m , pipe nipple – ¾” npt , tube nylon 6x4 1.5m , ¼” tms elbow , seperator , pressure transmitter , cooling system , oil cooler &after coller assembly , fan motor 2 hp , lubrication system , elbow 1 ¼”x m42 , pipe tank to tv , tee branch 1 ¼“ npt , spin on filter , filter head , element thermal valve , housing thermal valve 1 ¼” npt , swivelelbow connector 1 ¼” npt , pms coupling 1 ¼” bsp x 1 ¼” od , swivelelbow connector 1 ½ ” bsp x 1” od , swivel banjo connector m27 x 2 , motor and base assembly system , coupling drive , anti vibration mount –motor , anti vibration mount –airend , recommended sparesfor e18-e22& & e30-e7.5 ac 415vfor horizon series kit of spares upto 2500 hrs of running , air filter element , oil filter , element seperator , insurance kit e11 elgi neuron ii plc , minimum pressure valve kit , 240v ac solenoid valve , pipe coupling style 12-1 ½” , ‘o’ -ring , blow down valve kit , coupling element rotex 48 , intake valve kit , auto drain valve assembly/ kit , pressure trasmitter , temperature sensor , nylon tubedia 10 x 8 , nylon tube dia 6 x 4 , recommended sparesfor e30-e37 & e18-7.5 nii plc for horizon series , air filter element , oil filter kit , element seperator , insurance kit (7,5,10 & 13 kgf/cm2) , minimum pressure valve kit , 240v ac solenoid valve , hose with metallic bellow 50nb , blow down valve kit , coupling element, rotex 48 , intake valve kit nc -3” , pressure transmitter , temperature sensor , nylon tube dia 10 x 8 , nylon tube dia 6 x 4 , recommended spares for ee110-14ac 415 with nii plc.. fab : bjfl100050 , glass oil sight 1 ½” npt , air filter assy-1200 cfm , sst bolt clamp jt6a20-dia 70 , solenoid valve 240vnc , hose pvc ¾” , connector pvc hose ¾” , tubings 6mm , sleeve for 6x4mm tube , neuron 11 controller , pr transmitter 16bar, 4.20ma , temp sensor 0-150 deg, kty 10 , o ring-62.5x55.5x3.5 , o ring id 80.0x2.5 thick , pipe assy mpv hose to cool , gasket intake valve to airend , hose assy 1/2x1000hose assy 1/2x1000 , strainer assembly , element therm valve 125deg , orifice 3/8” x 1/8” , gasket flex hose 2 ½” , gasket flex hose 3” 20s , elbow tms ¼” x ¼” npt , elbow tms ½”x1/4”npt , coupling tms ¼” x ¼” npt , coupling tms 3/8” x ¼” npt , pressure regulator prne , drive coupling e110-e132 4 pol , mpv with check valve mpv l65 , inc intake valve 4inch hpkg-120 , o/c & a/c assy ee160 alu cooler , pipe assy-dcv , gasket flange 2” asa b165 , element separator,2016ts hor , ther valve house m/c flg type , hose assembly oil outlet , hose flexible 3” nb e20 dpsac , elbow rubber 6” , hose assy oil outlet , hose assy oil outlet , cooling & lubrication system , intake valve assly , intake valve assly , minimum pressure valve(mpv) assy , minimum pressure valve(mpv) assy , blow down valve (bdv)assembly , thermal valve assly , 50 va transformer , nrv 1/2 , split cooler assembly , split cooler assembly , blow down valve kit , intake valve kit nc , model: e160- 8.( water cooled) , solenoid valve , anti vibration mount , gasket dcv pipe air end slide e160 , hose 3 discharge for e160 5.5 bar , hose 3 mpv toac , hose-1 1/4oil cooler out , hose -1 1/4 oil cooler in , adopter nut pressure switch , hose -1 1/4 oil ignition , flange assembly- tank o tv , o-ring, 54.2 x 47.2x 3.5 , bolt hex m12 x 45 8.8 z yp5-8m , housing, thermal val;ve m/c , hose1 1/4 oil injection , elbow 1 1/2 bsp , hose - 3 1/2 discharge fore160 , hose - 2 1/2 pmv to tankfor e160 , flange assembly - mpv to tank , pipe nipple - 3 npt , transparent tube 8x6 , hex nipple orifice e160 , solenoid valve , hose 1/2 x 1000l , tube 1/4 , control panel e160, wc, 400v- sfu , plc controller set , shroud-exhaust fan

Local Bodies

TRN :49059460 | 20 May, 2025

Tender Value : 5.50 Lacs

Varanasi - Uttar Pradesh

Tender for tender for work of laying rubber mortar interlocking tiles up to the house of shri nepal singh, north of the koniya ghat bridge under adampur ii ward no. 68 koniya

Local Bodies

TRN :49059465 | 20 May, 2025

Tender Value : 5.16 Lacs

Varanasi - Uttar Pradesh

Tender for repair of damaged chowk near mannat vilink from sahajas house in mo. muslimpura under ward no. 87 saraiya via haroon and abdul aziz to sabir and rubber interlocking work in kutcha lane from ansar haji to iqbal master.

Related Searched Keywords : rubber

List of rubber Tenders

Tender for tender for disposable surgical rubber gloves (v2) (q2) , single use rubber examination gloves (v2) (q2)

Tender for tender for work of laying rubber mortar interlocking tiles up to the house of shri nepal singh, north of the koniya ghat bridge under adampur ii ward no. 68 koniya

Tender for repair of damaged chowk near mannat vilink from sahajas house in mo. muslimpura under ward no. 87 saraiya via haroon and abdul aziz to sabir and rubber interlocking work in kutcha lane from ansar haji to iqbal master.

Get rubber Tender Alert...

Related Searched Keywords : rubber

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us