Filters

List of ski-lift Tenders

List of latest ski-lift Tenders in Indian Tenders. Click on any ski-lift Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ski-lift Tenders.

All-Tenders (5)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35816610 | 24 Nov, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for engagement of skilled labours for optn. of high lift and medium lift on temporary basis for 3 shifts including allied duties and guarding at night at baranagar-kamarhati jnt. w/s scheme.

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

corporations/Associations/Others

TRN :35767155 | 10 Nov, 2025

Tender Value : 0

Achalpur - Maharashtra

Tender for supply of fire fighting equipment- pneumatic air lifting bag portable fire pump 275 lpm portable smoke extractor fan / blower door breaker portable monitor safety shoes safety helmet bolt cutter size 24" foam making branch as per is (fb-5x with) "delivery hose 38 mm dia. confirming to is 636-1988 type b in 15 meters length with ss male and female couplings" "delivery hose 63 mm dia. confirming to is 636-1988 type b in 15 meters length with ss male and female couplings. " mini rescue kit (crowbar, hydraulic door opener, mini hydraulic spreader, hydraulic rebar/cable cutter, mini hydraulic cutter, hydraulic pump) fireman safety belt kit portable inflatable lighting mast selectable flow nozzle made of aluminium alloy (hard anodized) light weight and easy handling having 63 mm size male instantaneous inlet megaphone long line manila rope 16 mm dia. 30 meters length short line manila rope 16 mm dia. 15 meters length grapnel with nylon rope 10 mm dia. x 30 meters length canvas gloves with anti-skid palm hydraulic jack 20 ton capacity fire extinguisher co2 4.5 kg capacity fire extinguisher abc type 4 kg capacity

State Government

TRN :35748532 | 17 Nov, 2025

Tender Value : 13.81 Crore

Ahmedabad - Gujarat

Tender for dismantling, providing, fabricating and erecting various component such as gate leaf assembly (including skin plate, rubber seal, guide roller, lifting bracket), horizontal girder assembly, arm assembly, turn buckle, replacement of trunnion assembly for 27gates and servicing of trunnion assembly for 27 gates, foot bridge, servicing and alignment of gear train and dial indicator etc. complete repair work of radial gate size 30 x 20 - 54 no. of und-2 irrigation scheme (dist: jamnagar)

Central Government/Public Sector

TRN :35711640 | 15 Nov, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for 320 01606 block bedplate assembly 320 01722 jet pistoncooling 320 02525 dowel ring 320 01656 o ring 20 x25mm 320 04554 switch cold start advance 320 01605cylinder block 320 02152 bedplate machining 320 02038bolt m14 x 164 320 a3103 crankshaft machining 32003132 gear crankshaft assembly 320 03298 bearing mainupper std 320 03301 bearing lower main std 320 03304bearing upper main rear std 320 03307 bearing lowermain rear std 320 03313 washer thrust main 320 03119seal front oil 320 03079 pulley crankshaft 320 03099hub flywheel 2105 1405 dowel pin 320 09249 kit pistonand rings standard 320 03114 rod connecting 32003310 bearing big end std 320 03685 camshaft assembly 320 03524 tappet valve 320 03677 rod push 32003584 camshaft 320 05042 casing timing 320 05129screw m8 x 20 320 05246 cover fip gear 320 05140 oring 320 05136 plug idler gear blanking m8 x 18 32008016 cover plate sae b 320 08007 o ring 1317 3507zbolt m12 x 25mm reduce flange hex 320 08017 coverplate pto 320 08009 o ring 1317 3405z bolt m10 x 20flanged 320 05084 housing flywheel 1317 3416z boltm10 x 70 flange reduced hex 1317 3307z bolt flangedm8 x 25 1317 3312z bolt m8 x 50 320 03029 seal rearoil 320 05026 cover access 1317 3303z bolt flanged m8x 16 320 03394 flywheel assy w300 320 03078 bolt m14x 108 320 02620 cylinder head 320 02616 gasketcylinder head 320 02614 bolt m12 x 140 320 a4901switch sender coolant 320 04551 washer bonded seal 320 03520 valve inlet 320 03575 spring valve 320 03533seal valve stem 320 03689 retainer valve spring 32003528 valve cotter 320 03521 valve exhaust 13173315z bolt flange head m8 x 65 320 03577 bridge piece 320 03579 adjuster screw 320 03721 shaft rocker 320 bid number gem2025b6715838 dated 25-10-2025 bid document1 88 0 0 03774 arm rocker exhaust, 320 03775 arm rocker inlet, 320 03587 pedestal, 320 03588 pedestal, 320 07634rocker cover, 320 07640 bolt isolated, 320 07580 sealrocker cover, 320 07752 filler cap assembly, 320 07504seal fuel injector, 320 07701 unit oil seperator cyclone, 826 11362 screw flange head m6 x16, 320 09049 bracketengine lifting, 826 01361 setscrew torque to 47nm, 32005551 manifold air induction turbo, 320 05521 gasket inletmanifold, 320 07035 gland boost control, 320 05693heater air intake 12v, 320 05559 gasket, 320 06265manifold exhaust, 320 06398 gasket exhaust manifold, 320 06045 bolt m10 x 57, 320 04542 pump waterassembly, 320 04510 gasket water pump, 320 04514screw pan head m8 x 25, 320 04739 housing thermostat, 320 04618 thermostat abi, 320 04543 seal c, 320 04758connector water inlet, 320 04186 pump oil, 320 a4159 oilpan assembly twin skin, 320 04162 seal oil pick up, 41023700 sealant gasket liquid gasket l5900 liquid gasketl5900-india engines only, 320 04057 seal bonded, 32004134 filter oil, 320 a4146 switch oil pressure, 13173305z bolt flanged m8 x 20, 320 04328 cooler oil 6 plate, 320 04113 gasket oil cooler cover, 320 04295 retainerfuel filter, 320 00896 core plug 16mm, 320 04040 o ring, 320 06924 pump injection 68kw 12v, 320 06578 gearinjection pump 65t, 320 05663 stud 8 x 41mm, 320 06564nut m8 flange head, 320 06577 nut m14 fuel injectionpump gear, 320 06576 pipe assembly fuel boost control, 320 a7161 pump lift, 320 07051 o ring, 320 07038 rodpush, 320 06837 injector mt3 tc 63 6, 320 02644 clampinjector, 320 02615 bolt, 320 06524 seal injector, 32006530 washer fuel injector, 320 06800 pipes hp 1 and 2, 320 06803 pipes hp 3 and 4, 320 07041 pipe filter, 32007042 pipe lift pump to filter, 320 07069 leak off circuitpipe, 320 07233 clip pipe, 320 07277 ring snap, 32007394 filter fuel 5 micron, 320 07522 cover fuel injectors, 320 07521 insert, 320 08657 adjuster autotensioner, 13173308z bolt m8 x 30 flange reduced hex, 320 06159turbocharger 68kw ac t3, 320 06266 gasket, 320 06007stud m8 x 75, 320 06008 nut lock m8 special, 320 05533tube assembly turbo crossover, 320 05569 clamp hose, 320 02698 stud m10 x 37, 320 04318 adaptor tube, 32000852 gasket drain pipe to turbo, 320 00851 o ring, 1317 3203z bolt m6 x 16 flange reduced hex, 320 05536hose 49.5mm x 55mm, 320 04388 pipe oil feed, 32006057 bolt m12 banjo, 320 06270 clip p clip, 320 06268pipe clip, 320 04221 pipe turbo oil drain, 320 04208gasket blk to o drain pipe, 320 08680 alternator 12v 95a, 1317 3422z bolt m10 x 120 flange reduced hex, 13173408z bolt m10 x 30 flange reduced, 320 09661 startermotor 12v

Related Searched Keywords : ski lift

List of ski-lift Tenders

Tender for engagement of skilled labours for optn. of high lift and medium lift on temporary basis for 3 shifts including allied duties and guarding at night at baranagar-kamarhati jnt. w/s scheme.

Get ski lift Tender Alert...

Related Searched Keywords : ski lift

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us