Filters

List of tank-machine Tenders

List of latest tank-machine Tenders in Indian Tenders. Click on any tank-machine Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for tank-machine Tenders.

All-Tenders (162)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49021348 | 13 May, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for material supply for all type construction work for year 2025-26 (under all fund) , sand (kanhan) , sand local , soft murun , hard murun , metal 100 mm , metal 80 mm , metal 40 mm , metal 20 mm , metal 10 mm , dust , rcc pipe 300 mm with colar , rcc pipe 450 mm with colar , rcc pipe 600 mm with colar , rcc pipe 800 mm with colar , rcc pipe 900 mm with colar , rcc pipe 1000 mm with colar , cement 53 grade isi mark , still 6 mm , still 8 mm , still 10mm , still 12 mm , still 16 mm , centring tar , vibrator needle , water trankar & tractor troali , backhoe loader , vibrator roller , simple steering road roller , mixchar machine , excavator 70 to 120 , excavator 120 to 220 , fiori 1 cubic meter , fiori 2 cubic meter , centring plate , waterproof compound , acrylic polymer modified liquid , acrylic polymer modified waterproofing powder , fibre glass mesh , plastic emulsion paint , water proof cement paint , lead / zink base oil paint , oil bound distemper , primer , washabe oil bound distemper , putty , birla white cement , terpentine , wood primer , information board still with painting , single lef door 16 mm thik , single lef door 32 mm thik , solid panel pvc internal door shutter , door kittas , door fremas , aluminium fixedwindows (two track sliding ) , aluminium fixedwindows (three track sliding ) , aluminium fixedwindows with mosquito net (three track sliding ) , chequered tiles , caramic tiles , vetrifide tiles , cota stone , marble tiles , granite tiles , red bricks (hat bhatta) , red bricks (round bhatta) , bricksfly aish , peving block 60 mm , peving block 80 mm , rcc compound poles 8ft , rcc compound poles 6 ft , pvc nahani , gally trap15*10 mm , swr pipe 110 mm , screw down bib 15mm , ladies ceramic urinal , wall mounturinal , water close pan complit , indian orissa pan , basin pan , water storage tank500 ltr , water storage tank 1000 ltr , water storage tank 2000 ltr , steel work , mild steel hollow pipe , mild steel i section beam , mild steel c section beam , mild steel angle , cenring kills , nut bolt and washer , profile sheet isi 0.50 mm , profile sheet fancyisi 0.50mm , g.i. sheet , stenless steel seatting bench , mild steel seatting bench , rcc bench , barbed wire / fenshing wire , electric brecker machine

Local Bodies

TRN :49021824 | 17 May, 2025

Tender Value : 42.42 Lacs

Davanagere - Karnataka

Tender for corrigendum : tender for annual supply of stationery, forms, registers, cleaning agents, printing materials and other necessary store items to city corporation office for the year 2025-26 - form no 55, 100pages pad equal to1 no,trade license form, 100pages pad equal to1 no,kmf-50 accountancy register,kmf-60 advance register,resolution book,trade license notice 1plus 1, 100pages pad equal to 1 no,kmf-26a register trade license demand book,supply of xerox papers a3 size (80gsm),supply of xerox papers legal size (80gsm),supply of xerox papers a4 size (80gsm),supply of tapal file board (best quality foldable).,supply of lase file.,supply of box file,supply of single hole punching machine,supply of gum bottle camel (250ml),supply of ink pad (medium),supply of spiral binding book (40 pages),supply of uniball pen (green/blue/black),supply of add gel pen (green/blue/black),supply of bangalore mudranalaya table calendar (2026),supply of bangalore mudranalaya wall calendar (2026),supply of stapler machine 10inch no,supply of stapler machine 24inche no,supply of stapler 10inches pin,supply of stapler 24inches pin,cl register,case register mar-4,case worker diary mar-19,case worker personal register mar-94,muddam register mar-9,birth and death application form 100pages pad equal to 1 no,e-asthi application form 100pages pad equal to1 no,aknowledgement form 1 plus 1. 100pages pad equal to1 no,kmf-24 register / b-khata register,kmf-25 register,kmf-15 register,kmf-22 form 100pages pad equal to 1 no,kmf-58 register / log book,kmf 48 register,kmf 49 register,kmf 45 register,kmf 46 register,kmf 53 register,kmf 65 register,kmf-59 form 100pafes pad-1 no,pump house log book,indent book 1plus 2. 100pages pad equal to1 no,sas notice 1 plus 1. 100pages pad equal to 1 no,water notice book 1 plus 1. 100pages pad equal to 1 no,form no 54, 100pages pad equal to 1 no,lifebuoy or branded company hand wash liquid 200ml,fen oil 1 liter good quality,broom monkeys branded,toilet brush branded company,pen stand branded company,steel cup and cap branded company,steel tray branded company,plastic tray branded company,steel tank. 20 ltr branded company,steel jug. 2 ltr branded company,cup and saser. branded company. good quality,vacuum cleaner,both room freshener good quality,jaala stick,harpick 01 ltr,tapal box with belt bag,medium size plastic dust holder,aluminum ladder 8 feet,khata file wrapper,file wrapper thick,file wrapper thin,postal cover 10l and 24b,postal cover 12l and 30b,office note first sheet,office note second sheet,table cloth 6l and 4b inches size blue and red color woolen cloth,red color cotton cloth good quality,yellow color cotton cloth good quality,green color cotton cloth good quality,white color cotton cloth good quality,hand cloth 1.6l and 2b in inches size white &color cotton cloth.(napkin),big size towel 3l 5b inches,lotion tablets. round shape. good quality,tharmas flask 1 ltr capacity. branded company,tharms flask half ltr capacity. branded company,wall clock. citizen or equivalent,godrage locker (7 lever),mop. branded company. good quality,door mat size 3l and 1.5b inches make in cooknut fiber,fiber bucket 10 ltr capacity round shape bucket,fiber jug.1 ltr capacity round shape with hand backet,air weik room sper freshaner 250 ml,attendance register

corporations/Associations/Others

TRN :49022053 | 19 May, 2025

Tender Value : 0

Bareilly - Uttar Pradesh

Tender for tender for outsource work - greasing per wheelgreasing per wheel including brake shoe lining fittingking pin work (per king pin)diesel tank opening, fastening and repairengine oil with oil filter changeengine head opening, fastening tataengine head opening, fastening leylandengine head tappet fitting tataengine head tappet fitting leylandengine replacement euro-2/3 tataengine replacement euro-2/3 leylandengine replacement euro-4piston ring job completeradiator assembly replacementviscous fan assembly replacement (complete work)inter cooler assembly replacementturbo charger replacementside plate packing change (complete work) tataa.c. unit replacementa.c. unit repaircooling plate packing change (complete work)timing plate replacement (complete work)timing cover oil seal replacement (complete work)rear main engine oil seal replacement (complete work)engine flywheel replacement (complete work)cam shaft replacement (complete work) engine mounting pad replacement. front/rearengine assembly (tata/leyland) (dismantling and assembly).fire pump removalfire pump removalinjector removalinjector fittinginjector complete repair (euro-2/3)fi pump lever and bush replacement. (complete work)fi pump assembly (euro-2/3) (complete work)clutch plate/pressure plate changegear box replacement 10.40gear yoke replacement 10.60 clutch release wearing replacementclutch release wearing repair.clutch sleeve cylinder replacementclutch sleeve cylinder repairclutch master cylinder replacementclutch master cylinder repairclutch booster opening and installation bs04p.shop opening and fastening per shaftrubber cushion changing tatarubber cushion changing leylandrubber cushion with center bearing changing tatarubber cushion with center bearing changing leylandsliding yoke replacementsliding yoke repairp.shop fastening per shaft.replacing front seal of gear box.gear box assembling (tata)gear box assembling (leyland).gear box oil change (tata).gear box oil change (leyland).gear lever setting tatagear lever setting leylandclutch plate repair (tata).clutch plate repair (leyland).pressure plate repair (tata). pressure plate repair (leyland).front spring replacement per piecefront spring repair per piece.front chassis bracket replacement/fitment per piecefront brake drum replacementfront brake diaphragm assembly replacementdiaphragm washer replacementfront axle complete opening/fasteningfront axle complete assembling.toy rod repair.push and pull rod repair.front stove axle opening/fasteningfront haw opening/fasteningrear spring replacement per piecerear spring repair per piecerear chassis bracket per piececrown cage assembly complete replacementcrown cage assembly complete repair rear axle complete disassemblyrear axle complete assembling.replace rivet diaphragm assemblyreplace rear brake drumopening/fixing the windshieldaccelerator cable replacementsteering box arombly replacementsteering rod & steering wheel replacementpower steering vane pump replacementpower steering vane pump repair.steering walks overhaulair dyer fittingair dyer repair.dual valve repairprotection valve fittingdd unit repairdd unit replacementpressure tank replacementself starter replacementself starter repairalternator replacementalternator repaircomplete repair of wiringwiper machine fitting fog light fittingwind screen glass fitting per glassseat fitting per seatseat metal panel opening fastening (per running feet)body structure channel straightening (per running feet)body structure angle straightening (per running feet)battery box iron fittingchassis straighteningpaneling complete bodyreplacing one seat cushion and back rexinereplacing mazda rubberchassis u bolt tightening and fittingreplacing front glass retainer and biddingfront bumper / rear bumper straighteningfront shade replacementfront shade repairfront shade grill replacementfront shade grill repairfront wind screen frame repair bs 6 changing fusebs 6 changing vadi cut outbs 6 changing uds pumpbs 6 opening and installing daf nozzlebs 6 cleaning urea linebs 6 cleaning silencer (dpf)bs 6 changing air filter primary safetybs 6 changing urea filterbs 6 changing steering filterbs 6 mixing tapidbs 6 changing turbo chargerbs 6 wiring opening-tying 1 (common rail wiring)bs 6 wiring opening-tying 2 (main wiring)bs 6 wiring opening-tying 3 (wiring harness)bs 6 wiring opening 6 wiring opening 6 (chassis wiring)bs 6 wiring opening 6 (light wiring)front wheel overhaulingstore / loading unloading technical helper rate per person per day (05 persons required)semi skilled labour rate per person per day (04 persons required)skilled labour rate per person per day

Government Departments

TRN :49022269 | 21 May, 2025

Tender Value : 8.46 Lacs

Agra - Uttar Pradesh

Tender for tender for zone-1, chhatta ward no. 27, bagh muzaffar khan, from saint john square to near garg homeo hall, hotmix road improvement work. - dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of engineer-in-charge. 2 supplying and stacking at site 53 mm to 22.4 mm size stone aggregate 3 supplying and stacking at site stone dust 4 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. 5 surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete: using bitumen emulsion (minimum 50% bitumen content- rs grade conforming to is : 8887) 6 providing and applying tack coat using bitumen emulsion conforming to is:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanicalbroomon bituminous surface @ 0.25kg/sqm 7 providing and laying dense graded bituminous macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of engineer-in-charge.50 to 100 mm average compacted thickness with bitumen of grade vg-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 tph capacity 8 providing and laying bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of engineer-in-charge. 40/50 mm compacted thickness with bitumen of grade vg-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 tph capacity 9 providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatichermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t&p, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of engineer-in-charge and accordance with applicable specifications. 10 reflective raised pavement markers (cat eye/ road stud) supply and flxing of raised pavement marker with made of plastic body of rpimi road stud shall be moulded from asa (acrylic styrene acrylonitrile) or hips (high-lmoact polystyrene) or acryloniilrile butadien styrene (abs) or any oiher suitable malerial approved by the engineer. the marker shall support aload of 13,635 kg tested in ccordance with astm d4280.the reflective panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internaleflection of the lighl entring the lens face. lenses shall be mouled of methyl melhecrylate conforming io astm d78b of equivalent the slop or retro-reflecting surface shall preferably be 35+1-5 degree to base and the area of each relro _reflecling sllrface shall not be less than 13.00 sq.cm the marker height shall not be less lhan 10 mm and shall nol exceed 20 mm & width shall not exceed 130 mm. the base of the marker shall be flal within 1.3 mm all road studs shall be legibly marked wilh the name , lrade or other means of identification of the manufacture. epoxynslallations, excess adhesive around the edge of the malker, excess adheslve on the pavemenl and adhesive on the exposed surfaces of the markers shall be immedialely removed. the contractor shall submit a two year warranty for sal sfactory lleldeformance including stipulated retro-refleclance of the reflecting panel , to the engineer . ln addition a two year warranty foralisfactory infield perfonnance of the finished road marker shall also be given by lhe conlractor who carries out the work of fixing of reflective road ma*ers. ln case the markers are displaced , damaged . gel worn out or lose theireflectivity compared lo stipulated standards , the contractor would be reqlllred to replace allsuch markers within 15 days ofthe inlimation from the engineer. at his own cost the rate shall include all materlals, labour, t&p,ransportalion, insiallation and incidentals all complete as per direction of the engineer-in-charge 11 supply & fixing granite stone work display board (size 2.50ft x 4.00ft) including painting, lettering etc. all complete. (none schedule) 12 sub total 13 add/deduction rs. for estimate figure amount match 14 grand total

State Government

TRN :49022557 | 14 May, 2025

Tender Value : 0

Bhavnagar - Gujarat

Tender for tender for supply of materials - (1) rcc pipe np2/ np3 pipe size 150 mm to 1200 mm price of 1 meter and price of one manol. (2) paver block plain and rubber mode 60 mm to 150 mm price of one brass. (3) price of one piece of pre-cast. (4) price of various sizes of gravel, sand, grit, metal brass for cc and rcc work. (5) price of one ton of metal (hand broken stone- 25 mm to 90 mm soft morum). (6) price of one meter of pvc pipe, gic pipe line 6 kg 63 mm to 140 mm isi brand and price of one iron valve. (7) cement i.s. i 53 grade steel price per piece and iron and steel of various sizes per kg (8) jcb and hitachi machine price per hour and small and large excavator and tractor price per hour. (9) price of one brick on reaching the site (10) price of one meter of bore (4,6, 8,”) cable starter etc. (11) price of submersible pump motor from 1.5 h,p. to 20 h.p. (12) daily wage rates and labor rates of various works. according to the size. (13) price of one piece of l.e.d street light and bulb of i,h,i company of different volts and price of 1 meter standard cable. (14) price of different cctv cameras according to mp. (15) price of dustbin no.-1 for dry/wet waste and various cleaning equipment. (16) price of distumber and oil paint per liter (17) according to different sizes price of laying tiles. (18) price of tree-car no.-1. (19) price of computer printer (complete set and according to different items and price of spare parts. (20) price of labour for making r.c.c. roads and block roads. (21) price of purchase and spraying of pesticides, lime, powder. (22) price of cleaning of sewerage chambers, toilets and septic tanks. etc.

State Government

TRN :49022598 | 14 May, 2025

Tender Value : 0

Bhavnagar - Gujarat

Tender for tender for supply of materials - (1) rcc pipe np2/ np3 pipe size 150 mm to 1200 mm price of 1 meter and price of one manol. (2) paver block plain and rubber mode 60 mm to 150 mm price of one brass. (3) price of one piece of pre-cast. (4) price of various sizes of gravel, sand, grit, metal brass for cc and rcc work. (5) price of one ton of metal (hand broken stone- 25 mm to 90 mm soft morum). (6) price of one meter of pvc pipe, gic pipe line 6 kg 63 mm to 140 mm isi brand and price of one iron valve. (7) cement i.s. i 53 grade steel price per piece and iron and steel of various sizes per kg (8) jcb and hitachi machine price per hour and small and large excavator and tractor price per hour. (9) price of one brick on reaching the site (10) price of one meter of bore (4,6, 8,”) cable starter etc. (11) price of submersible pump motor from 1.5 h,p. to 20 h.p. (12) daily wage rates and labor rates of various works. according to the size. (13) price of one piece of l.e.d street light and bulb of i,h,i company of different volts and price of 1 meter standard cable. (14) price of different cctv cameras according to mp. (15) price of dustbin no.-1 for dry/wet waste and various cleaning equipment. (16) price of distumber and oil paint per liter (17) according to different sizes price of laying tiles. (18) price of tree-car no.-1. (19) price of computer printer (complete set and according to different items and price of spare parts. (20) price of labour for making r.c.c. roads and block roads. (21) price of purchase and spraying of pesticides, lime, powder. (22) price of cleaning of sewerage chambers, toilets and septic tanks. etc.

State Government

TRN :49022859 | 12 May, 2025

Tender Value : 1.44 Crore

Lucknow - Uttar Pradesh

Tender for tender for proper drainage vidhan sabha premises, construction of drains and installing cow catchers. - providing and fixing ms cow catcher in respective areaincluding material, cutting, hoisting, fixing in position as directed by engineer in charge or as per technical specifications. 2 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per sor ch-12 si no.-21(10.25.2) 3 construction of rcc drain havingsize 0.60 m x 1.20cmincluding labour , material t&p etc for proper completion of the work. 4 construction of cc drain having internal size 45 cm x 75 cm including labour , material t&p etc for proper completion of the work. 5 construction of 1 x 3.5 m rcc culvert for providing cross drainage faciliy in between vidhan bhawan to raj bhawan 6 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material within all lifts and lead upto 1km (by mechanical means). as per dsr 16.77 7 providing and laying microsurfacing course comprising of dry fine aggregate / graded stone chipping confirming to type – iii grading (6 to 8 mm) ofmorth -table 500-31, polymer modified cationic microsurfacing grade bitumen emulsionordinary portland cement, chemical additives and water as per morth -514 propotioning and mixing in a slurry seal machine with capacity of minimum 3000 ltrs of emulsion tank, two separate cement bins, water tank of 3000 ltrs and aggregate bin of minimum 10 cum capacity, cleaning, mixing and laying at siteall complete as per the specifications and directions of the engineer – in – charge.as per sor ch-25 si no.-31 8 taking out existing cc interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of engineer-in-charge.as per sor ch-25 si no.-36 9 laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineerin-charge. (old cc paver blocks shall be supplied by the department free of cost).as per sor ch-25 si no.-35 10 providing and laying of interlocking concrete block pavements having thickness 80 mm as per drawings and technical specification clause 1504. as per sor ch-25 si no.-34

State Government

TRN :49023607 | 16 May, 2025

Tender Value : 22.62 Lacs

Lucknow - Uttar Pradesh

Tender for tender for construction and renovation work of community center located in sector-d of kanpur road scheme - rcc repairs 2 chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of engineer-in-charge. 3 75mm average thickness 4 50mm average thickness 5 25 mm average thickness 6 cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of engineer-in-charge. 7 bars upto 12 mm diameter 8 bars above 12 mm diameter 9 drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in rcc beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of engineer-in-charge.upto and including 12mm dia. 10 providing, mixing and applying bonding coat of approved adhesive on chipped portion of rcc as per specifications and direction of engineer-in-charge complete in all respect.epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make 11 providing, mixing and applying sbr polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of engineer-in-charge.note: measurement and payment: the pre-measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 n/sqmm2). 12 25 mm average thickness in 2 layers. 13 50 mm average thickness in 3 layers. 14 providing and laying sbr polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structuralmembers e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of rcc member.note: rates shall be for finished surface area of concrete and shall include the cost of making holes in existing rcc slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved super-plasticiser forrendering concrete as flowable self compacting and sbr polymer but shall exclude cost of reinforcement, bond coat, shear keys, centering and shuttering, strutting, propping etc (payment under this item shall be madeonly after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) 15 50mm thick in grade m 25 with cement content not less than 330 kg per cum 16 75mm thick in grade m 25 with cement content not less than 330 kg per cum 17 100mm thick in grade m 25 with cement content not less than 330 kg per cum 18 providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of engineer-in-charge.(the payment shall be made on the basis of actual weight of approved grout injected.) 19 epoxy injection grout in concrete/rcc work of approved make 20 providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the engineerin- charge.wooven pvc cloth 21 shotcreting r.c.c. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stoneaggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by engineer- in-chargenote: rates shall include the providing necessary ground wires etc. the levelling gauges, if used, shall be paid for separately. payment under this item shall be made only after proper wet curing has been done and surface hasbeen satisfactorily evaluated by sounding/tapping with a blunt metal instrument. 22 50mm thick in grade m 25 with cement content not less than 330 kg per cum 23 75mm thick in grade m 25 with cement content not less than 330 kg per cum 24 providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of engineer-in-charge. 25 providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of l shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by engineer-in-charge. 26 mild steel or iron work in plain work such as in r.c.c. or r.b. (when not included in an over all rates ) including bending for proper completion of the workand including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. 27 centering and shuttering including strutting, propping etc. and removal of form for : lintels, beams, plinth beams, girders, bressumers and cantilevers 28 centering and shuttering including strutting, propping etc. and removal of form for : columns, pillars, piers, abutments, posts and struts 29 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thic 30 waterproofing and terracing 31 providing and laying in situ five course water proofing treatment with app (atactic polypropylene) modified polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to is : 702, 3rd layer of roofing membrane app modified polymeric membrane 2.0 mm thick of 3.00 kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron hmhdpe film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron hmhdpe film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). 32 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 33 miscellaneous works 34 providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, includingadditional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge.note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. 35 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. 36 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand) 37 cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge.the cleaning shall consist following operations:-(i) tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) chlorination of rcc internal surface by liquid chlorine.(iv) the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. 38 door-window repair 39 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) 40 renewal of old putty of glass panes (length) 41 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead asper direction of engineer - in- charge. 42 extra for cutting reinforcement bars manually/ by mechanical means in r.c.c. or r.b. work (payment shall be made on the cross sectional area of r.c.c. or r.b. work) as per direction of engineer-in-charge. 43 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar 44 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area beyond 3 sq. metres 45 casement door double panel with french (false) mullion with zinc alloy (zamak) 3d hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.using r4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above ) x (100 mm& above) & french (false ) mullion (64mm & above) x (60 mm & above). (height above 2.5 metre) 46 toughened glass 12 mm thickness 47 finishing work 48 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 49 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 50 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 51 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 52 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 53 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : new work (two or more coats) over and including water thinnable priming coat with cement primer 54 applying priming coat:with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 55 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work 56 washrooms 57 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm 58 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 59 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including isi marked stainless steel butt hinges with necessary screws 60 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 61 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm 62 providing and fixing aluminium sliding door bolts isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Local Bodies

TRN :49025425 | 16 May, 2025

Tender Value : 0

Meerut - Uttar Pradesh

Tender for tender for supply of 1. sand, earth filling work, brick, cement, concrete, gravel, rebar, dust, raw ballast, stone ballast, interlocking tiles, floor and wall tiles 2. solar light installation and repair, street light installation and repair 3. iron bench, open gym, library, school swing 4. tank fitting, hand pump repair and rebar items 5. school, anganwadi center and materials used in panchayat office 6. electrical equipment fittings and materials 7. wall painting, flex, unipole and other works 8. stationary, dustbin, computer equipment, camera, printer etc. 9. channel fabrication, doors, windows etc. 10. corona protection related materials 11. jcb and tractor trolley and cleaning equipment etc. for pond/drain cleaning work 12. e-rickshaw purchase, fogging machine purchase, water cooler, r.o. and timely supply of other materials like public toilet etc. 13. compressor/shredder, cutting machine etc. for garbage disposal. 14. citizen information board, high mask light

State Government

TRN :49025426 | 13 May, 2025

Tender Value : 0

Meerut - Uttar Pradesh

Tender for tender for provide of construction material balu, sand work, brick, cement, sand, rod, dust, stone, interlocking tiles floor, wall tiles, solar light installation and repairing work, street light installation and repairing, iron bench, open gym, library, school swing, tank fitting, handpump repairing equipment, hand rebore, school, electric equipment, fitting equipment, wall painting, flex, unipole, stationary equipment, dustbin, computer equipment, camera, printer, channel fabrication, door, window, corona rescue equipment, drain / reservoir cleaning work, jcb, tractor, trolley cleaning equipment, e-rickshaw, fogging machine, water cooler, ro, community toilet equipment, plastic paint, cutting machine, citizen information board.

Related Searched Keywords : tank machine

List of tank-machine Tenders

Get tank machine Tender Alert...

Related Searched Keywords : tank machine

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us