Filters

List of tower Tenders

List of latest tower Tenders in Indian Tenders. Click on any tower Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for tower Tenders.

All-Tenders (168)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :49019326 | 27 May, 2025

Tender Value : 73.46 Lacs

Surendranagar - Gujarat

Tender for tender for erection of 66kv s/c from 66kv moti vavadi to proposed 66kv jalila s/s line on d/c tower with acsr panther conductor having route length 7.6 rkm

State Government

TRN :49019658 | 13 May, 2025

Tender Value : 0

Hukkeri - Karnataka

Tender for construction of kitchen shed at the government marathi higher primary school in salamwadi village - supplys ofboulders,supplys ofbond stone 20 x 20 x 45 cm,supplys ofsize stone 20 x 20 x 25 cms,supplys ofplasticizer / super plasticizer,supplys ofbinding wire,supplys oftmt bars fe 500,supplys ofcasurina poles 100 - 150 mm,supplys ofsilver oak or equivalent planks 38 mm thick,supplys ofportland cement,supplys ofcoarse sand (zone iii),supplys ofbroken stone aggregate 12 mm to 10 mm size,supplys ofbroken stone aggregate 20 mm size,supplys ofbroken stone aggregate 40 mm size,supplys ofdry distemper,supplys of5.50 mm thick plain glass,supplys ofchrominum plated screws,supplys ofcleat angles,supplys ofalluminium handles - 15 mm,supplys ofalluminium tower bolt - 20 cm,supplys ofpvc edge beading,supplys ofrubber beading for shutters beading,supplys ofnylon rollers,supplys ofaluminium window frame section 1.20 mm thick,supplys ofenamel metal paint,supplys ofms flat,supplys ofm.s rods,supplys ofhonnewood planks for panels 20 mm thick,supplys ofhonne wood,supplys ofmathi/nandi wood planks for panels 25 mm thick,supplys ofburnt bricks class 35 (non modular),supplys ofgranite/trap broken metal 100 mm and down size,supplys ofjungle wood runners and planks,supplys oflead or pvc connection pipe 32mm dia (for wash basin),supplys ofc.i. / m.s. brackets for flushing cistern,supplys ofbrass stop cock,supplys ofcp brass waste 32 mm of standard pattern,supplys ofcp brass chain with plug,supplys ofcopper plated brass piller tap 15mm,supplys ofwhite vitreous china clay flat back wash basin size 630x450mm,supplys ofbib cock 20mm nominal bore,supplys ofpolythylene pipes high density 25mm external dia,supplys ofpvc pipe of 4kg cum75 mm,supplys ofpolyenthylene water storage tank of specified capacity l,supplys ofunit cost as per the specification ( galven sheet),supplys ofcorbon electrodes,supplys ofrms gusset plate,supplys ofms pipes of 80 mm to 100 mm dia,supplys ofcudddapah slab 4 cm thick/shahabad/thandur blue,supplys ofvitrified tiles 600x600 mm,supplys ofwater proofing cement paint,supplys ofwhitening

State Government

TRN :49019662 | 13 May, 2025

Tender Value : 0

Hukkeri - Karnataka

Tender for construction of kitchen shed at government marathi higher primary school in modage village - supplys ofboulders,supplys ofbond stone 20 x 20 x 45 cm,supplys ofsize stone 20 x 20 x 25 cms,supplys ofplasticizer / super plasticizer,supplys ofbinding wire,supplys oftmt bars fe 500,supplys ofcasurina poles 100 - 150 mm,supplys ofsilver oak or equivalent planks 38 mm thick,supplys ofportland cement,supplys ofcoarse sand (zone iii),supplys ofbroken stone aggregate 12 mm to 10 mm size,supplys ofbroken stone aggregate 20 mm size,supplys ofbroken stone aggregate 40 mm size,supplys ofdry distemper,supplys of5.50 mm thick plain glass,supplys ofchrominum plated screws,supplys ofcleat angles,supplys ofalluminium handles - 15 mm,supplys ofalluminium tower bolt - 20 cm,supplys ofpvc edge beading,supplys ofrubber beading for shutters beading,supplys ofnylon rollers,supplys ofaluminium window frame section 1.20 mm thick,supplys ofenamel metal paint,supplys ofms flat,supplys ofm.s rods,supplys ofhonnewood planks for panels 20 mm thick,supplys ofhonne wood,supplys ofmathi/nandi wood planks for panels 25 mm thick,supplys ofburnt bricks class 35 (non modular),supplys ofgranite/trap broken metal 100 mm and down size,supplys ofjungle wood runners and planks,supplys oflead or pvc connection pipe 32mm dia (for wash basin),supplys ofc.i. / m.s. brackets for flushing cistern,supplys ofbrass stop cock,supplys ofcp brass waste 32 mm of standard pattern,supplys ofcp brass chain with plug,supplys ofcopper plated brass piller tap 15mm,supplys ofwhite vitreous china clay flat back wash basin size 630x450mm,supplys ofbib cock 20mm nominal bore,supplys ofpolythylene pipes high density 25mm external dia,supplys ofpvc pipe of 4kg cum75 mm,supplys ofpolyenthylene water storage tank of specified capacity l,supplys ofunit cost as per the specification ( galven sheet),supplys ofcorbon electrodes,supplys ofrms gusset plate,supplys ofms pipes of 80 mm to 100 mm dia,supplys ofcudddapah slab 4 cm thick/shahabad/thandur blue,supplys ofvitrified tiles 600x600 mm,supplys ofwater proofing cement paint,supplys ofwhitening

State Government

TRN :49019663 | 13 May, 2025

Tender Value : 0

Hukkeri - Karnataka

Tender for construction of kitchen shed at government marathi higher primary school in shettihalli village - supplys ofboulders,supplys ofbond stone 20 x 20 x 45 cm,supplys ofsize stone 20 x 20 x 25 cms,supplys ofplasticizer / super plasticizer,supplys ofbinding wire,supplys oftmt bars fe 500,supplys ofcasurina poles 100 - 150 mm,supplys ofsilver oak or equivalent planks 38 mm thick,supplys ofportland cement,supplys ofcoarse sand (zone iii),supplys ofbroken stone aggregate 12 mm to 10 mm size,supplys ofbroken stone aggregate 20 mm size,supplys ofbroken stone aggregate 40 mm size,supplys ofdry distemper,supplys of5.50 mm thick plain glass,supplys ofchrominum plated screws,supplys ofcleat angles,supplys ofalluminium handles - 15 mm,supplys ofalluminium tower bolt - 20 cm,supplys ofpvc edge beading,supplys ofrubber beading for shutters beading,supplys ofnylon rollers,supplys ofaluminium window frame section 1.20 mm thick,supplys ofenamel metal paint,supplys ofms flat,supplys ofm.s rods,supplys ofhonnewood planks for panels 20 mm thick,supplys ofhonne wood,supplys ofmathi/nandi wood planks for panels 25 mm thick,supplys ofburnt bricks class 35 (non modular),supplys ofgranite/trap broken metal 100 mm and down size,supplys ofjungle wood runners and planks,supplys oflead or pvc connection pipe 32mm dia (for wash basin),supplys ofc.i. / m.s. brackets for flushing cistern,supplys ofbrass stop cock,supplys ofcp brass waste 32 mm of standard pattern,supplys ofcp brass chain with plug,supplys ofcopper plated brass piller tap 15mm,supplys ofwhite vitreous china clay flat back wash basin size 630x450mm,supplys ofbib cock 20mm nominal bore,supplys ofpolythylene pipes high density 25mm external dia,supplys ofpvc pipe of 4kg cum75 mm,supplys ofpolyenthylene water storage tank of specified capacity l,supplys ofunit cost as per the specification ( galven sheet),supplys ofcorbon electrodes,supplys ofrms gusset plate,supplys ofms pipes of 80 mm to 100 mm dia,supplys ofcudddapah slab 4 cm thick/shahabad/thandur blue,supplys ofvitrified tiles 600x600 mm,supplys ofwater proofing cement paint,supplys ofwhitening

Local Bodies

TRN :49019799 | 14 May, 2025

Tender Value : 9.25 Lacs

Sardarshahar - Rajasthan

Tender for construction work of cc road from sampat mal tower to sahida khan at ward no 31 sardarshahar

State Government

TRN :49020042 | 13 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for tender for annual repair to rawatpur colony type-iv servant qatar - dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. dsr -15.56 2 12 mm cement plaster of mixwith 1:6 (1 cement: 6 coarse sand) dsr 13.4.2 on wall. 3 12 mm cement plaster of mixwith 1:4 (1 cement: 4 coarse sand) dsr 13.4.1 on celling. 4 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dsr-9.21.1 5 providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :200x10 mm dsr9.74.2 6 providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm dsr 9.75.1 7 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per is: 1378) 300x16 mm dsr 9.62.2 8 providing and fixing bright finished brass handles with screws etc.complete: 125 mm dsr 9.81.3 9 providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete dsr 9.82 10 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with second class teak wood beading 62x19 mm.dsr-9.51.1 11 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completedsr - 13.88 12 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.dsr-13.80 13 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work (two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface dsr-13.112.1 14 finishing walls with water proofing cement paint of required shade .( old work one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. ) dsr-13.109.1 15 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .dsr-13.81 16 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old workdsr-13.99.1 17 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc., complete. dsr-11.39 18 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complet size of tile 600x600 mm .dsr-14.41.2 19 providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge. with granite stone of area less than 0.50 sqm. dsr 16.86.1 20 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.15 mm nominal dia pipes . dsr 18.8.1 21 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 25 mm nominal dia pipes . dsr 18.8.3 22 providing and fixing c.p. brass bib cock of pproved quality conforming to is:8931 : 15 mm nominal bore sor/dsr 18.49.1 23 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore sor/dsr 18.50.1 24 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15 mm nominal bore sor/dsr 18.53.1 25 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931.15 mm nominal bore dsr 18.52.1 26 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with asingle 15 mm c.p. brass pillar tap dsr 17.7.2 27 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests dsr 17.1.2 28 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredw.c. pan with isi marked white solid plastic seat and lid dsr 17.2.1 29 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 17.9.1 white glazed fire clay kitchen sink of size 600x450x 250 mm .dsr -17.9.1 30 providing and fixing t-iron frames for doors, windows and ventilators of mild steel teesections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).40x40x6mm@3.5kg/m . dsr 10.13.1 31 brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) . with f.p.s.(non modular) bricks .dsr-6.4.2 32 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate dsr 11.3.1 33 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity - white .dsr-17.18.1 34 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr-18.48 35 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter dsr12.41.2 36 renewing glass panes, with wooden fillets wherever necessary:float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) dsr14.6.1 37 cleaning of chocked sewer line by diesel running vehicle mountinghydraulic operated high pressure suction cum jetting sewer cleaningmachine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150 mm dia upto 300 mm dsr 14.77 38 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) dsr 5.2.2 39 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more.dsr 5.22a.6 40 centering and shuttering including strutting, propping etc. and removal of form work for : columns, piers, abutments, pillars, posts and struts.dsr 4.3.3

State Government

TRN :49020061 | 13 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for tender for annual repair to mc robertganj colony - dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. dsr -15.56 2 12 mm cement plaster of mixwith 1:6 (1 cement: 6 coarse sand) dsr 13.4.2 on wall. 3 12 mm cement plaster of mixwith 1:4 (1 cement: 4 coarse sand) dsr 13.4.1 on celling. 4 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dsr-9.21.1 5 providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :200x10 mm dsr9.74.2 6 providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm dsr 9.75.1 7 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per is: 1378) 300x16 mm dsr 9.62.2 8 providing and fixing bright finished brass handles with screws etc.complete: 125 mm dsr 9.81.3 9 providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete dsr 9.82 10 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with second class teak wood beading 62x19 mm.dsr-9.51.1 11 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completedsr - 13.88 12 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.dsr-13.80 13 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work (two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface dsr-13.112.1 14 finishing walls with water proofing cement paint of required shade .( old work one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. ) dsr-13.109.1 15 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .dsr-13.81 16 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work dsr-13.99.1 17 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc., complete. dsr-11.39 18 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complet size of tile 600x600 mm .dsr-14.41.2 19 providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge. with granite stone of area less than 0.50 sqm. dsr 16.86.1 20 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.15 mm nominal dia pipes . dsr 18.8.1 21 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 25 mm nominal dia pipes . dsr 18.8.3 22 providing and fixing c.p. brass bib cock of pproved quality conforming to is:8931 : 15 mm nominal bore sor/dsr 18.49.1 23 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore sor/dsr 18.50.1 24 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15 mm nominal bore sor/dsr 18.53.1 25 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931.15 mm nominal bore dsr 18.52.1 26 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with asingle 15 mm c.p. brass pillar tap dsr 17.7.2 27 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests dsr 17.1.2 28 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredw.c. pan with isi marked white solid plastic seat and lid dsr 17.2.1 29 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 17.9.1 white glazed fire clay kitchen sink of size 600x450x 250 mm .dsr -17.9.1 30 providing and fixing t-iron frames for doors, windows and ventilators of mild steel teesections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).40x40x6mm@3.5kg/m . dsr 10.13.1 31 brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) . with f.p.s.(non modular) bricks .dsr-6.4.2 32 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in:: cement mortar 1:6 (1 cement : 6 coarse sand)dsr 6.1.2 33 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate dsr 11.3.1 34 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity - white .dsr-17.18.1 35 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr-18.48 36 earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by engineer-in-charge. all kinds of soil dsr 2.6.1 37 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). dsr 4.1.8 38 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter dsr12.41.2 39 renewing glass panes, with wooden fillets wherever necessary:float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) dsr14.6.1 40 cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150 mm dia upto 300 mm dsr 14.77 41 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) dsr 5.2.2 42 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more.dsr 5.22a.6 43 centering and shuttering including strutting, propping etc. and removal of form work for : columns, piers, abutments, pillars, posts and struts.dsr 4.3.3

corporations/Associations/Others

TRN :49020317 | 14 May, 2025

Tender Value : 40.00 Lacs

Bhatinda - Punjab

Tender for annual repair, maintenance and operation armo works of civil and electrical on lump sum service charges on deposit work in office building r.o.bhatinda for epfo regional office bhavishya nidhi bhavan ,urban estate phase -i ,near tv tower,bhatinda

State Government

TRN :49020428 | 20 Jun, 2025

Tender Value : 19.39 Lacs

Jabalpur - Madhya Pradesh

Tender for surface cleaning and painting work of tower structures of total 02 no 132kv ehv lines (total 617 nos. towers and weight of towers 2105.97mt) under eht-maint. dn satna on labour contract basis at the risk and cost of m/s. shri vardhman trade, jabalpu

State Government

TRN :49020519 | 15 May, 2025

Tender Value : 0

Pandavapura - Karnataka

Tender for tender for melukote gp nrlm shed - ppura mason class 1,eletrification,gst,ppura cp brass waste 32 mm of standard pattern,ppura brass stop cock,ppura lead or pvc connection pipe 32mm dia (for wash basin),ppura licenced plumber with tools,ppura pvc pipe of 4kg cum,63 mm,ppura pvc pipe of 4kg cum,110 mm,ppura polyenthylene water storage tank of specified capacity l,ppura labour charges for lifting and placing in position and making connection at 7%,ppura handling loading and unloading 3% on material,ppura water proofing cement paint,ppura add brush, putty, sand paper at 2% on cost of paint,ppura plastic emulsion paint,ppura add brush, putty, sand paper, roller at 5% on cost of paint,ppura enamel paint,ppura transportation charges of materials beyond 5 km10%,ppura cost of 6.5mm m.s. coil,ppura fabrication charges.,ppura mason class 2,ppura rcc cap 1000 mm dia, 100 mm thick,ppura corpenter,ppura corpenter avrage,ppura chrominum plated screws,ppura 5.50 mm thick plain glass,ppura fabricator,ppura add hom of welding and grinding machine 2% on material,ppura formwork, centering & scaffolding for plastering & painting of ceiling - 25%,ppura vitrified tiles 600x600 mm,ppura high bond tile adhesive for vitrified tiles,ppura adhesive for joints,ppura machine polished granite stone slabs 20 mm,ppura stone dresser (with tools),ppura ceramic tiles of size 30 x 30 cms,ppura white cement,ppura orissa pattern of size 580x440mm with integral type foot rests,ppura 100mm s or p trap,ppura p.v.c. flushing cistern 10 lts low level with fitting,ppura c.i. / m.s. brackets for flushing cistern,ppura g.i. 32mm dia telescopic flush pipes with fittings specials,ppura m.s. holder bat clamp 32mm,ppura g.i. overflow pipe 20mm dia,ppura special for overflow pipe,ppura mosquito proof coupling 25mm,ppura add white lead paint, gasket, cement, sand for making good the wall and floor,ppura white vitreous china clay flat back wash basin size 630x450mm,ppura copper plated brass piller tap 15mm,ppura cp brass chain with plug,ppura binding wire,ppura m.s rods,ppura ms flat,ppura fitter class i,ppura welder grade i,ppura add hom of welding and grinding machine 4% on material,ppura ready mix primer paint (ready mix red lead paint),ppura add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint,ppura painter class i,ppura add providing and removing scaffolding at 3% on labour,ppura add handling , loading and unloading at 2% on material,ppura enamel metal paint,ppura add brush at 1% on cost of paint,ppura mathi/nandi wood planks for panels 25 mm thick,ppura add cutting and other wastage 5%,ppura hom of machinaries for planing,ppura mathi/nandi wood scantling,ppura unit cost as per the specification,ppura powder coated 60-70 micron,ppura nylon rollers,ppura rubber beading for shutters beading,ppura pvc beading,ppura alluminium tower bolt - 20 cm,ppura alluminium handles - 15 mm,ppura cleat angles,ppura coarse sand (zone iii),ppura portland cement,ppura mixer (concrete) - 1 cum capacity,ppura add watering charges at 1 % on material,ppura add sundries charges at 1 % on material,ppura over head & other miscellaneous charges,ppura size stone 20 x 20 x 25 cms,ppura bond stone 20 x 20 x 45 cm,ppura boulders,ppura mixer (concrete small used in culvert),ppura mason class i (with tools),ppura mason class ii (with tools),ppura stone chistler class ii,ppura plasticizer / super plasticizer,ppura hom of vibrator 0.71 days,ppura add sundries charges at 1 % on labour,ppura add watering charges at 1 % on labour,ppura formwork, centering & scaffolding for beams & lintels of building - 60%,ppura formwork, centering & scaffolding for roof (straight & arched) - 50%,ppura burnt bricks of class designation 35 modular,ppura casurina poles 100 - 150 mm,ppura add handling , loading and unloading at 1% on material,ppura add sundries charges at 2 % on material,ppura formwork, centering & scaffolding for chejjas, canopy & other architectural,ppura tmt bars fe 500,ppura broken stone aggregate 40 mm size,ppura broken stone aggregate 20 mm size,ppura broken stone aggregate 12 mm to 10 mm size

Related Searched Keywords : tower

List of tower Tenders

Tender for tender for erection of 66kv s/c from 66kv moti vavadi to proposed 66kv jalila s/s line on d/c tower with acsr panther conductor having route length 7.6 rkm

Tender for construction work of cc road from sampat mal tower to sahida khan at ward no 31 sardarshahar

Tender for annual repair, maintenance and operation armo works of civil and electrical on lump sum service charges on deposit work in office building r.o.bhatinda for epfo regional office bhavishya nidhi bhavan ,urban estate phase -i ,near tv tower,bhatinda

Tender for surface cleaning and painting work of tower structures of total 02 no 132kv ehv lines (total 617 nos. towers and weight of towers 2105.97mt) under eht-maint. dn satna on labour contract basis at the risk and cost of m/s. shri vardhman trade, jabalpu

Get tower Tender Alert...

Related Searched Keywords : tower

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us