Filters

List of tubular-section Tenders

List of latest tubular-section Tenders in Indian Tenders. Click on any tubular-section Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for tubular-section Tenders.

All-Tenders (5)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :34931739 | 14 Aug, 2025

Tender Value : 0

Thiruvananthapuram - Kerala

Tender for gem bids for supply, white cement m sand psand 20mm aggregate brick solid block 4 inch solid block 6 inch hollow block 4 inch hollow block 6 inch steel 8mm steel 10 mm steel 12mm particle board 12mm thick marine plywood 9mm marine plywood 12mm marine plywood 18mm mica board1mm thick calcium silicate wall board 12mm ramco froasted sticker sun film black film hydraulic doorcloser tubular type aluminium section body anodisedaluminium handles 100mm with plate 150 x 32 mm anodised aluminium handles 125 mm with plate 175 x 32mm 75 mm ss fancy handles for kitchen cabinet chromium plated brass mortice latch and lock 100 x 65 mmwith six levers and a pair of brass lever handles stainlesssteel ss 304 grade adjustable friction window stay 51 x 19mm stainless steel s s 304 grade adjustable frictionwindow stay 710 x 19 mm window handle high awh21-l-rhigh 21 100 mm mortice lock with 6 levers for aluminiumdoor aluminium hanging floor door stopper with twinrubber and stopper double action hydraulic floor springwith stainless steel cover plate stainless steel butt hinges125x64x19 mm is 12817 marked stainless steel butthinges 100x58x19 mm is 12817 marked dr fixit piddifin2k dr fixit pidicrete urp silicone sealent white siliconesealent black silicone sealent clear transperant siliconesealent gun steel cutting wheel tile cutting blade granite cutting blade grinding wheel welding rod315mm welding rod 25mm ss welding rod 315mm interior putty exterior putty thinner turpentine varnish wood primer araldite tile gum paverblockpolish wire brush brush 1 inch brush 2 inch brush 3inch brush 4 inch roller brush large roller brush small cement primer sand paper 120 sand paper 100 sandpaper 80 sand paper 60 anchor bolt hook type 6mm bid number gem2025b6490476 dated 24-07-2025 bid document1 108 1 1 anchor bolt hook type 8mm, anchor bolt 6mm, anchor bolt8mm, pvc coated wire, drill bit 6mm, drill bit 8mm, drillbit 12mm, drill bit 14mm, drill bit 16mm, flush tank, trolley wheels 75 mm dia heavy duty, ss cupboard handle8 inch, ss drawer slider 16 inch long, drawer wheel 1.5inch dia heavy duty, 1 inch black screw, 1.5 inch blackscrew, 1.25 inch black screw, 2 inch black screw, 0.50inch counter sunk ss screw, 0.75 inch counter sunk ssscrew, 1 inch self screw, 1.5 inch self screw, 1.25 inch selfscrew, 2 inch self screw, 0.50 inch self screw, 0.75 inchself screw, fisher 10mm, fisher 8mm, fisher 6mm, brassscrew 2 inch, brass screw 2.5 inch, ss tower bolt 300mmlong, glass cutter, m seal 250 g, ss curtain hook cup hook, ss bracket 20 mm dia for hanger rod, joint filler, rubbergloves, scrubber for tank cleaning, mop for tank cleaning, 16mm x 10cm nut and bolt with washer, 12mm x 10cmnut and bolt with washer, 10mm x 10cm nut and bolt withwasher, 8mm x 10cm nut and bolt with washer, 6mm x10cm nut and bolt with washer, calcium silicate falseceiling tile 600x600mm, gypsum false ceiling tile600x600mm, false ceiling grid main tee, false ceiling grid4ft tee, false ceiling grid 2ft tee, false ceiling grid 1 inchwall angle, false ceiling grid 0.75 inch supporting anglestay, g.i perimeter section for gypsum ceiling, g.i intersection for gypsum ceiling, g.i section for gypsum ceiling, gypsum screw gyproc for gypsum ceiling, 8mm anchor boltgyproc for gypsum board, mr gypsum board 8x4, gypsumjoint putty, gypsum joint tape 2 inch, aluminium rivet3.5mm, rivet gun, star bit, 3.5 mm metal bit, 6mm metalbit, 4mm metal bit, 6mm hilti bit, wheather strip foraluminium door, aluminium door pivot, 12 inch aluminiumtower bolt, 8 inch aluminium tower bolt, aluminium doorbolt 300 mm, o rubber, aluminium door lock godrej, cylinder lock, acp sheet 3.5mm viva, j corner pvcsection, 7 by 8 corner pvc, small wheather strip forcupboard door, autocloser bit, ss autocloser hinge ebco, 0.75 inch gypsaw screw, 1 inch gypsaw screw, 1.5 inchgypsaw screw, 2 inch gypsaw screw, 2 inch wood screw, 3inch wood screw, 18 inch aluminium cutting wheel, ssdoor handle 6 inch, gp pipe, ms angle, ms flat, dog chainfor cylinders, cup brush for grainding, 6 inch rainwatergutter aqua star, rain water gutter clamp 6 inch, rainwater gutter end cap 6 inch, rain water gutter drop 6 inch, rain water gutter connection 6 inch, 25x25mm plasticdummy, 40x40mm plastic dummy, 50x50mm plasticdummy, 60x40mm plastic dummy, 100x100mm plasticdummy, welding glass, welding holder, welding machinemale connector, welding machine female connector, welding cable, concrete nail 2 inch, 100x100x4mm msplate with hole, 150x150x4mm ms plate with hole, selfscrew bit for sheet, ms nut and bolt 1.5 inch long 8mmthick, gate hinge ms 1.5 inch, gate hinge ms 2 inch, msaldrop 6 inch, 0.35mm trafford roofing sheet 10ft long, plain roofing sheet 0.35mm thick 2ft width, 0.35mm ridgesheet 8ft, 18 guage g.i plain sheet 8x4ft, banian waste, 3.5mm steel wire rope, 4mm steel wire rope, weld mesh 1inch x 1inch, fevicol, wpc panal 32 mm thick 0.75x2.00m, wpc panal 32 mm thick 0.85x2.00m, skin door 75 x20032 mm thick, skin door 90 x200 32 mm thick, magneticcatcher

State Government

TRN :34892962 | 02 Aug, 2025

Tender Value : 0

Gandhi Nagar - Gujarat

Tender for gem bids for lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for road and street lights (v2) conforming to is 10322 (part 5 / section 3) (q3)

State Government

TRN :34843071 | 29 Jul, 2025

Tender Value : 0

Amravati - Maharashtra

Tender for gem bids for "prelam 2shutter wardrobe 900lx600dx1800ht without mirrorproviding and fixing wardrobe without mirror of size 900lx600dx1800h the wardrobe side panels and doors are made up of 18mm thick prelam partiole board with both side decorative laminate all exposed edges are sealed with rmm thick pvc edge banding the shelves are made of 18mm thick prelam particle board with decorative laminate on both sides the top is made of 36 mm prelam particle board with decorative laminateon both sides 18mm pralam partiole board and 18mm batons on all sides to achieve 36mm overall thickness the exposed edges of the top are sealed with 2mm thick pvc edge banding the top most part of the wardrobe has an aluminum hanger rod of bbco make one drawer of size 400wx150hx450d made of 18mm thick prelam particle board has been considered ; " "prelam 2 shutter wardrobe 750lx600dx1200ht without mirrorlow height top 18mm thick prelaminated partical board with rmm pvc edge band on all edges carcass (body shutter back 18mm thick prelaminated partical board with pvc edge band on all exposed edges shelf four adjustable and one fixed shelf made of prelaminated partical board with pvc edge band on all edges shutters lockable swing shutters with c handle hardware hettich hinges ; " prelam storage 1050lx450dx750ht supply fitting & fixing of sos make prelam stormge storage top shall be made of 25mm thick prelam (osl particle board for low height prelam storage up to 750 height and above 750mm height 6mm thick prolam (osi particle board is used both the 25mm and 18mm thick prelam (osl particle board confirmning to is 12823 1990 with rmm thick pvc lipping glued with kliberit 779 6 glue storage top is under goes from distributed load test for deflection by applying 0 027kg mm lond on top and concentric load test by applying 90kg load on weaker section load carrying capacity of 18mm thick shelf shall be 25kgs udl storage body ; "high back chair adjustable seat height armrest looking mechanism seat lock swivel wheels head support wxh 630mx1140m frame material sold wood upholstery type cushion diy ;" "sofa ease 2seater leatherette finish ss legs 1500x750dx880h for ground floor vip suit living area specifications frame the sofas frame is made from solid sustainable wood and commercial ply upholstery fabric leatherette upholstered back and sea base frame 40x22x16mm thk ss pipe base frame finish ss mirror finish modules 1seater 3seater ;" sofa ease 3seater leatherette finish sslegs900lx750dx880h for ground floor vip suit living area specifications frame the sofas frame is made from solid sustainable wood and commercial ply upholstery fabric leatherette upholstered back and seat base frame40x22x16mm thk sspipe base frame finish ssmirror finish modules 1seater3seat the construction shall be aesthetically appealing completely knook down construction fitting is done by using the minifix dowels gable end height will be 725mm and its depth varies as per the depth of work top standard depth of work top will be soo mm and 750mm ; piss center table 1200wx600dx350h for vip tea table table top to be made of 12mm thick plain toughned glass uderstructure to be made of ss finish ; public seating in configuration 3seating metal perforated benches levellers they are made of injection moulded nylon 6and is used for level adjustment for any unevenness on the floor they are fitted to the leg assembly leg assembly it is a powder coated legs to support the firm seating structure above and are made of ms they have threaded nuts welded to fit section for fixing levelers to the leg armrest it is made of oblong tube and is joined to the frame section at the ends to provide the sturdiness to the structure these armrests are strong to provide the needed comfort when leaning on seat ; providing fixing cotton curtain with rod and stiching three fold table top is under goes from distributed load test for deflection by applying 0027 kg mm lond ontop and concentrio lond tost by applying rokg load on weaker section understructure gable end is made up of romm thick dual color edge in sandwich of 25 the prelam partiale board and mm the bsl prelam particle board confirming ti s 128231990 in alate grey with 2 mm 045 mm thick pvc lipping glued with kliberit 7796 glue ; prelam free standing table1800lx200dx750ht with rb rf pedestal4000x450dx670ht supply fitting & fixing of sos make prolam cabin work top shall be made up of work top shall be made 25mm thick prelam osl particle board confirming to is128231990withmm thick pvc lipping glued with kliberit7796glue work top is under goes from distributed load test for deflection by applying 0027kg mm lod on top and concentric load test by applying rokg load on weaker section understructure modesty panel shall be made of 18 mmthick prelam bsl particle board confirming to is 128231990 with 2mm thick pvc lipping glued with kliberit7796 glue gable ends shall be made of 25mm thiok prelambsl particle board confirming tois128231990 "prelam free standing table 1800l200d750ht with rb rf pedestal 4000450d670ht supply fitting fixing of sos make prolam cabin work top shall be made up of work top shall be made 25mm thick prelam osl particle board confirming to is 12823 1990 with mm thick pvc lipping glued with kliberit 7796 glue work top is under goes from distributed load test for deflection by applying 0027kg mm lod on top and concentric load test by applying rokg load on weaker section understructure modesty panel shall be made of 18mm thick prelam bsl particle board confirming to is 12823 1990 with 2mm thick pvc lipping glued with kliberit 7796 glue gable ends shall be made of mm thiok prelam bsl particle board confirming to is 128231990 ; " "60linear sharing and non sharing workstation1350lx500x12000ht with cmm glass separator (frosted panel 600lx450h and key bord traysupply fitting & fixing of sos make sl60modular workstation work top work top shall be made 25mm thick prelam osl particle board confirming to is 128231990with2mm thick pvc lipping glued with kliberit 7796glue table top is under goes from distributed load test for deflection by applying 27kg mm load on top and concentric load test by applying sokg load on weaker section ; " "slide60 frame 1200ht for cubicle partition supply fitting & fixing of sos make sl 60modular workstation frame the frame shall be made of extruded aluminum sections having 60mm width and average wall thickness 1 6mm the frame shall be powder coated with epoxy polyester powder with the average thickness 50 to 60 microns conforming to is 138711993 the frame shall be joined together by aluminum connectors and all visible aluminum shall be powder coated main frame shall be of 60mm thickness offering various functional and decorative finishes as well as cable management capacity height of frame available 1200mm width of frame available 1050mm 1200mm joints posts connectors trims the two frame shall be joined together in 90 degree by using post connector shall be made of crca sheet confirming to is513 2008 connectors shall be fitted to a pole with the help of m6 x 16 pan head machine screw and washer the comers shall be concealed by posts covers which shall be a half round aluminum profiles made up of aluminum extrusion confirming is733 1983 tiles the tiles shall be made to fit the shape of the module and frame these tiles shall be supported from top and bottom sides with the tile holder tile holder used to incorporate the tile at specified location shall be made of 1 2m aluminum extrusion confirming the is 733 1983 with specified powder coating finish up 50 to 60 micron tiles are made up of by following material prelaminated tiles laminate tiles shall be made up of 9mm thick prelam one side laminated particle board confirming to is2046 1995 in color as specified and 1mm groove is made on both the edge of the tile ; " chair chair made up of puarms premiumcrca tubular pipe framing duly powder coated with mesh back moulded seat cushioned with4850mmfoam ; office chair with height adjestable base for conferance room vip waiting area room done chair dimension overall height 800mm seat size 410mmwx420mmd backrest size 390mmhx580mmw supplying and placing a chalr bucket assembly the bucket assembly made up of injection moulded in pu foam and upholstered with leatherite polyurethane foam have following propertles density 5055kgm 3understructure the understructure is made up of 32x16mmthick swage plpe and25x25x12mm thick square pipe powder coated in black color having dft50to80micron fabric seat fabric malfino properties content 100polyester weight 160gsmleatherlte propertles content 100polyesterwelght268gsm ;

State Government

TRN :34843231 | 30 Jul, 2025

Tender Value : 17.76 Lacs

Trivandrum - Kerala

Tender for gem bids for office chair v3 q2, steel shelving cabinets adjustabletype confirming to is 3312 v4 q3, metal beds v3 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atc, additionaldoc 2 requested in atc, compliance of boq specificationand supporting documentin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6405627; /dated: 15-07-2025 & & / bid document1 / 15 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 r r /primary product categoryoffice chair v3 s s & u & u /time allowed for technicalclarifications during technical evaluation2 days v v b b w w v v 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno s s /estimated bid value1776000 s s w w /evaluation methoditem wise evaluation/ y & y & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.38a. , , \ v < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : director, sctimstsree chitra tirunal institute for medical sciences and technology sctimst, thiruvananthapuram, departmentof science and technology dst, ministry of science and technologydirector, sctimst /splitting2 / 15 ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. s s s s / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under:3 / 15 s /evaluation schedules s /estimated value & / / item/category /quantityschedule 1208000office chair v332schedule 2800000steel shelving cabinets adjustable typeconfirming to is 3312 v432schedule 3768000metal beds v364office chair v3 32 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesgeneralrequirementchair typenon-revolving and non-tilting chair with armrest, non-revolving and non-tilting chair without armrestunderstructurechair understructure typecantilever, legsunderstructure materialerw tube conforming to is : 1161 latest, aluminiumpipe hollow section conforming to is: 1285 latest, stainless steel ss 202, stainless steel ss 304, stainless steel ss 316, mild steel, solid woodthe shape of tubularsection of understructureround, square, rectangular, elliptical, nasection sizediameter/sides ofunderstructure19 mm, 22 mm, 25 mm, 30 mm, 19x19 mm, 25x25mm, 30x30 mm, 25x15 mm, 30x12 mm, 30x15 mm, 30x20 mm, 45x19 mm, 35x15 mm, 38x20 mm, naunderstructure wallthickness mm1, 1.2, 1.6, 2, 2.5, 3, na for woodcastoryes, noseatseat materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used in seatkg per cubic meter< 30, >30< 40, >40< 50, >50, nathickness of pu used inseat mm< 30, >30< 40, >40< 50, >50, naminimum seat height fromfloor surface mm< 400, >400< 500, >500width of seat mm< 400, >400< 450, >450depth of seat mm< 400, >400< 450, >450seat upholstery materialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded pu4 / 15 backrestbackrest base framematerialmild steel frame, hot pressed plywood, solid wood, injection moulded plasticbackrest materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used inbackrest kg per cubicmeter< 30, >30< 40, >40< 50, >50, nathickness of pu used inbackrest mm< 30, >30< 40, >40< 50, >50, nawidth of backrest mm< 400, >400< 450, >450backrest height from theseat level> 350< 450, >450< 550, >550backrest upholsterymaterialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded puarmrestarmrest typeoverhanging armrest, continuous armrest, mouldedarmrest continuously fitted with seat and back, moulded t armrest fitted with seat bottom, mouldedarmrest mounted to frame, without armrestarmrest movementadjustable, fixed, without armrestswarrantywarranty period in numberof years1, 2, 3, 4, 5 or higher year /speci cation u u /specificationname b b s s /bid requirementallowed valuesadditional specification parameters - office chair v3 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum3230steel shelving cabinets adjustable type confirming to is 3312 v4 32 pieces 5 / 15 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards andcertificationsgoverning standardconformity to is 3312generictypes of shelving cabinetsdimensions are withoutpedestal heightsmall 1150 mm x 760 mm x 430 mm, large 1855mm x 910 mm x 480 mmavailability of drawersyes, noavailability of lockersyes, noadditional specification parameters - steel shelving cabinets adjustable type confirming to is3312 v4 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1priya p695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, triavndrum3230metal beds v3 64 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation6 / 15 /speci cation u u /specificationname b b s s /bid requirementallowed valuesgenerictype of metal bedmetal bed, metal bed with headboard only, metal bedwith footboard only, metal bed with headboard andfootboard, metal bed with headboard, footboard andcanopysize category of metal bedsingle, double, queen size, king size, super king sizeoverall length of bed inmm1800 - 1850 mm, 1850 - 1900 mm, 1900 - 1950 mm, 1950 - 2000 mmoverall width of bed inmm750 - 900 mm 2.5 to 3 ft, 900 - 1050 mm 3 to 3.5ft, 1050 - 1200 mm 3.5 to 4 ft, 1200 - 1350 mm 4to 4.5 ft, 1350 - 1500 mm 4.5 to 5 ft, 1500 - 1650mm 5 to 5.4 ft, 1650 - 1800 mm 5.4 to 6 ft, 1800 -1950 mm 6 to 6.4 ft, 1950 - 2100 mm 6.4 to 6.9 ftoverall height of bed frominstallation level in mm150 - 200 mm, 200 - 250 mm, 250 - 300 mm, 300 -350 mm, 350 - 400 mm, 400 - 450 mm, 450 - 500mm, 500 - 550 mm, 550 - 600 mmavailability of headboardyes, noavailability of footboardyes, nometal bed framematerial of bed frameincluding legsmild steel, aluminium, wrought ironmetal bedmattress supportpaneltype of bed mattresssupporthorizontal beams only, vertical beams only, crossbeams - horizontal & vertical combomaterial of bed mattresssupport panelmild steel, aluminium, wrought ironmetal bedheadboardmaterial of bed headboardframemild steel, aluminium, wrought iron, nametal bedfootboardmaterial of bed footboardframemild steel, aluminium, wrought iron, naadditional specification parameters - metal beds v3 64 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity7 / 15 . .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum6430special terms and conditions-version:1 effective from 25-06-2024 for category office chair v31. special terms and conditions1. the colours for the seat and back, are speci ed based on the procurement done by various buyerson gem. 2. sellers are advised to refrain from uploading any catalogue selecting image colour other than theoption chosen for the catalogue, as available in the category. any mismanagement of this will betreated seriously as per gem policies.3. in case buyer requires to buy any other colour not covered in the category, same may be speci edunder additional parameters while creating the bid. the colours mentioned in the additionalparameters by the buyer in the bid shall prevail over the colours indicated in the catalogue.4. sellers are advised to check the complete bid document while offering their prices.5 5 : : d d/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder financial standing: the bidder should not be under liquidation, court receivership or similarproceedings, should not be bankrupt. bidder to upload undertaking to this effect with bid.3. genericbidders shall quote only those products part of service delivery in the bid which are not obsolete in themarket and has at least 7 years residual market life i.e. the offered product shall not be declared end-of-life by the oem before this period.4. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.5. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take any8 / 15 responsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.6. buyer added bid specific atcbuyer added text based atc clausesa. bidders are advised to quote prices as per technical specification and additional specification. bidders should not include price bid in the technical bid. the price format to be submitted along with financial bid only. if any of the price components disclosed in the technical bid, the bid will summarily be rejected and thebidder will be disqualified from further bidding process.b. bidders should submit the manufacturers authorization in attached format- a buyer uploaded atc documentc. liquidated damages:if the supplier fails to deliver or install/commission any or all the goods or fails to perform the services within the time frames incorporated in the purchase order, the purchaser shall, without prejudice to other rights and remedies available to the purchaser under the contract, deduct from the contract price, asliquidated damages, a sum equivalent to 0.5% per week of delay or part thereof on delayed supply of goods, installation, commissioning and/or services until actual delivery or performance subject to a maximum of 10 % of the contract price. once the maximum is reached purchaser may consider termination of the contract.if any delay by the supplier is maintained its contractual obligations towards delivery of goods andperformance of services shall render the supplier liable to any or all of the following sanctions:a. imposition of liquidated damages, b. forfeiture of its performance security andc. termination of the contract for defaultd. sctimst reserves the right to ask for a free demonstration of the quoted equipment/ items after giving reasonable time to the bidder at a pre-determined place acceptable to the purchaser or at a site in case of non-portable and heavy equipment for evaluating the technical compatibility as per the bidding documentspeci cations, professionalism and quality of work of the bidder for technically qualifying for opening the price bid. sctimst reserves the right to accept/ reject the bid based on the product/ site evaluation as stated above.1 2 door storage cupboards. indent no: 1 qty 32 supply & installation of 2 door cupboards the storage size should be 900w x 507d x 1950ht +/-1 mm. storage should be completely knock down construction. storage skirting should be removableand to cover integral legs and legs should be fitted with screw type leveller. storage should be made from combination of crca 0.8 mm & 0.6 mm thickness. storage door should be provided with steel hinge door. door lock should be 3-way 90 degree removable key type cam lock &locking mechanism and handle should be base aesthetically appealing, ergonomic, flush with door made from zinc alloy.9 / 15 one locker should be placed in the rh side of the storage with hinge door and 2-way cam lock with knob type handle top side full shelf should be fixed and adjustable half shelves 1 no on rh side of the storage & 2 no s on lh side of vertical partition. one number hanging rod should be provided on left half of partition below top shelf & another one on right half below locker both mounted on snap-ontype plastic brackets. storage nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certified by bifma, greenguard, greenpro, aiota, and iaq2 cantilever chair. indent no.3 qty 32 supply &installation of non revolving chair the chair seat should be made of injection moulded in glass lled polypropylene compound which is upholstered with fabric upholstery covers and moulded polyurethane foam. the chair back should be injection moulded in glass lled polypropylene compound which is upholstered with mesh fabric seat size should be: 50 cm. d x48 cm. w back size should be: 53 cm. w x 39 cm. d the foam should be high-resilience polyurethane moulded with density 45+/-2 kg/m and hardness 16+/-2 kgf as per is: 7888 for 25% compression. chair under structure should be cantilever with powder coateddft 50 10 microns welded tubular main frame is made from 2.54 0.03 cm x 0.2 0.016cm and 1.9 0.3mm x 0.12 0.0096 cm with mild steel electric resistance welding tube. the armrest should be made of glass filled polypropylene compound andassembled over the tubular frame the chair shoes should be made of glass lled polypropylene compound with and pressed fitted with tubular frame. felt is provided below the shoes. 10 / 15 3 single bed with head and footboard. indent no.4 qty 64 supply & installation of single size metal bed. the bed size should be 2080w x 925d x 385 ht +/-1 mm. bed should be completely knock down construction with metal frame material. metal frame size should be mild steel pipe 25.4x 50.8 x 1.2 thk, mild steel pipe 19.05x 19.05 x 0.8 thk and angle 20x20x1.6 thk +/-0.1mm. bed should be provided with headboard & footboard bed nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certi ed by bifma, green guard, green pro, aiota, and iaq additional terms and conditions1 the bidder participating in the tender should be an oem or an authorized dealer. upload manufacturer authorization: wherever authorized distributors are submitting the bid, manufacturers authorization form maf/certi cate withoem details shall also be uploaded.2 splitting up of bid items is not possible. bidder shall quote for all products mentioned in the bill of quantity. bidders o er is liable to be rejected if theydo not quote for all products mentioned in bill of quantity boq.3 bidder should upload speci cation and catalogues of the quoted products. bidder should provide the available colour options for the o ered chairs, lpsc reserves the right to choose the colours from the available options for the above items and the same will be mentioned in the p.o. 4 service escalation matrix of the bidder should be provided with o ce set up and warehouse details in kerala. registration certi cate also to be submitted as documentary evidence.5 the supplied products should be designed and tested as per bifma standards for comfort, safety, and durability.6 the bidder/oem should have manufacturing facility in india and they shall manufacture in accordance with iso 9001:2015, 14001:2015, 45001:2018 and 500o1:2018follow safety norms in accordance of ohsas7 the bidder/ oem should have green guard, aiota, iaq, green pro and griha certi cation for the o ered furniture which are in accordance with environment requirements and recognized under ministry of new and renewable energy.11 / 15 the bidder / oem themselves or through resellers, should have executed project for supply and installation / commissioning of same or

Central Government/Public Sector

TRN :34820615 | 29 Jul, 2025

Tender Value : 19.15 Lacs

New Delhi - Delhi

Tender for gem bids for anodised aluminium handles 125mm with plate 175x32mm , anodised aluminium handles 100mm with plate 150x32mm , anodised aluminium hanging type door stopper , hydraulic door closer tubular type aluminium section baby , stainless steel wire guage grade 304 aperture 1.4 mm and 0.50 mm dia wire

Related Searched Keywords : tubular section

List of tubular-section Tenders

Tender for gem bids for lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for road and street lights (v2) conforming to is 10322 (part 5 / section 3) (q3)

Get tubular section Tender Alert...

Related Searched Keywords : tubular section

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us