Filters

List of upt-cable Tenders

List of latest upt-cable Tenders in Indian Tenders. Click on any upt-cable Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for upt-cable Tenders.

All-Tenders (24)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34923896 | 11 Aug, 2025

Tender Value : 2.50 Lacs

Hyderabad - Telangana

Tender for procurement of 2 nos of cable vulcanising plants upto 95 sq.mm for use at area workshop yellandu

Central Government/Public Sector

TRN :34927938 | 14 Aug, 2025

Tender Value : 7.50 Crore

Mumbai - Maharashtra

Tender for gem bids for custom bid for services - vacuum blasting with grit externalfor all whether deck, custom bid for services - blasting ofexternal areas with copper slag, custom bid for services -hydro blasting above water hull weather decks andsuperstructure as per nace no wj 1, custom bid forservices - blasting of internal areas with grits, custom bidfor services - blasting of external with copper slag for looseseats and pillars, custom bid for services - internal areacleaning emery papering followed by painting, custom bidfor services - external area cleaning emery paperingfollowed by painting, custom bid for services - highpressure jet washing with fresh water, custom bid forservices - low pressure jet washing with fresh water, custom bid for services - touch up painting external percoat, custom bid for services - touch up painting internalper coat, custom bid for services - degreasing andchemical cleaning, custom bid for services - stagingabove 10 ft in sqm, custom bid for services - stripe coatpainting internal per coat, custom bid for services -feathering internal and external area, custom bid forservices - spot blasting with copper slag, custom bid forservices - piping surface preparation by thoroughlydegreasing roughened with emery paper again degreasingplus one coat of primer on pipes pipe dia upto 50 mm, custom bid for services - piping surface preparation bythoroughly degreasing roughened with emery paper againdegreasing plus one coat of primer on pipes pipe dia 51to150mm, custom bid for services - piping surfacepreparation by thoroughly degreasing roughned with emerypaper again degreasing plus one coat of primer on pipespipe dia 151 to 350 mm, custom bid for services - pipingcleaning the surface papering and application ofsubsequent coat of paint pipe dia up to 50 mm, custom bidfor services - piping cleaning the surface papering andapplication of subsequent coat paint pipe dia 51 to 150 mm, custom bid for services - piping cleaning the surfacepapering and application of subsequent coat of paint pipedia151 to 350 mm, custom bid for services - cable trayssurface preparation by papering one coat of primer up to100 mm, custom bid for services - cable trays surfacepreparation by papering one coat of primer 101 to 200 mm, custom bid for services - cable trays surface preparationby papering plus one coat of primer beyond 201mm, custom bid for services - cable trays cleaning the surface, papering and application of subsequent coat of paintingupto 100mm, custom bid for services - cable trayscleaning the surface papering and application ofsubsequent coat of painting 101 mm to 200 mm, custombid for services - cable trays cleaning the surface paperingand application of subsequent coat of painting beyond201mm, custom bid for services - cleaning and painting ofplain and perforated gi sheet ms sheet aluminium sheetand ss sheet per coat, custom bid for services -deployment of cherry picker for superstructure washingand painting //bid details2 / 27 1 1 /

Central Government/Public Sector

TRN :34899511 | 12 Aug, 2025

Tender Value : 39.80 Lacs

West Siang - Arunachal Pradesh

Tender for gem bids for furnishing, vip wooden double bed 2 point 16l x 1 point 87w withmatress godrej almirah double door big size woodenbed side table 3 shelves floor lamp with three shlevesfurniture metal waste bucket small hanger for wall long mirror with frame vip blanket double bed normalblanket double bed bed sheet with pillow cover reynolds door curtain and window curtain for bed room vip photoframe sofa set furniture wooden 5 seater centre tablecoffee table wooden furniture lambs with table smartled tv 53 inch rug carpet 5x3 dining table with fourseater chair wooden vip gas stove 2 burner induction pressure cooker 5 ltr pressure cooker 3 ltr non stick frypen ss cookware set 5 ltr all utensil set kitchen rackstand ss top patila all size 5 to 1 ltr serving bouls andplatters and spoon knife set ss round container all size kitchen clothing tea pot okhli set of dishes plates andbowls and cups set of tableware knives and forks andspoons drinking glasses set of 6 mug and tea cups food storage containers small to large for storing staplesand leftover oven toster grill otg 20 ltr juicer mixer waste bin microwave oven 28l dishwasher shink washing machine full automatic 7 kg 5 point 5 kg fullyautomatic dryer machine automatic heavy iron press withstand cloth dryer stand laundry baskets broom andpan mop stand with bucket duster and pocha cloths toilet bowl cleaner brush and plunger and cleaning supplies garbage bags harpic 1 ltr lizol 1 ltr coine 500 ltr white phynile bucket 20l with mug bathroom towel big hand towel toilet paper with stand bathroom mirror corner stand bathing shop cloth washing dish andpowder hand dryer western toilet seat wash besin towel stand soap stand computer and printer binders lined and blank paper pens and pencil and ruler and bid number gem2025b6363769 dated 22-07-2025 bid document1 105 0 0 eraser and pencil crayons and markers, calculators, voltasdeep frezzer, electric kettle 1 ltr, bukhari, curtain doorsize, solar inverter with battery, solar light 200w, 5 kvagenerator, plastic chairs, plastic table, gyser 10 ltr, exhust fan, curtain rod steel, curtain accessories, carpetroll for floor, foot mat 2x3ft, upvc door 6.5x4 ft, upvcdoor 6 x 3 ft, upvc window with mirror 6x4 ft, upvcwindow with mirror 3x3 ft, upvc door frame, upvcwindow frame, wooden safety 10x1x1, pvc panal forcelling, ordinary rock, filling available excavated earthexcluding rock, supplying and filling in plinth with fine sandunder floors including, supplying chemical emulsion insealed containers including delivery, stone soling underfloors including watering, ns ramming consolidating anddressing complete upto 5 km, providing and laying inposition cement concrete of specified grade excluding thecost of centering and shuttering in footings and bases ofcolumns, all work upto floor plinth level, all work fromplinth level upto floor roof level, centering and shutteringincluding strutting propping, centering and shutteringincluding strutting and propping and removal of form, centering and shuttering including strutting, reinforcementof rcc work including straightening, brick work withcommon burnt, providing half brick masonry with bricks ofclass designation, providing and fixing 1 st quality ceramicglazed wall tiles confirming, providing and laying ceramicglazed floor tiles, providing and laying vitrified floor tiles indifferent sizes, 12 mm thk cement plaster on wall, 15 mmcement plaster on the rough side of single or half brick wallof mix 1 ratio 4, 6 mm thick cement plaster to ceiling, providing and applying white cement based putty of avgthickness, white washing with lime to give an even shadefor new work, finishing walls with water proofing cementpaint of approved brand and maufacture and of requiredshade to give an even shade, applying one coat of cementprimer approved brand, providing wood work in frames offor door and windows, providing and fixing isi marked flushdoor shutters conforming t, providing and fixing aluminiumhandles, providing and fixing aluminum hanging floor doorstopper, providing and fixing aluminium tower bolts, providing and fixing ms grills of required pattern in framesof windows, steel work in built up tubular trusses includingcutting, providing and fixing precoated galvanised ironprofile sheets, providing and fixing precoated galvanisedsteel sheet roofing accessories, providing and fixingprecoated galvanised steel sheet roofing accessories zeropoint 50 mm, providing and fixing thermal insulation ofceiling, weight to be carried by head load from manigongto work site, point wiring in pvc conduit with modular typeswitch, circuit sub main wiring in pvc conduit, 2 x 4 sqmm earth wire for power plug, 2 x 6 sq mm 1 x 6 sq mmearth wire, 2x10 sq mm 1x10sq mm earth wire for commonarea db, 4x10 sq mm 2x10sq mm earth wire for db, 4x16sq mm 2x16sq mm earth wire for db, supplying anddrawing following sizes of frls pvc insulated copperconductor3 x 4 sq mm, supplying and drawing followingsizes of frls pvc insulated copper conductor 3 x 6 sq mm, supplying and drawing co axial tv cable rg, s f pvcconduit, s f modular type switch, s f modular type switchsocket, tv antenna socket outlet, supplying and fixingstepped type electronic fan regulator, supplying and fixingfollowing size modules gi box along with modular base, supplying and fixing following size modules gi box alongwith modular base cover plate for modular switches, //bid details2 / 105 supplying and fixing suitable size gi box with modular plateand cover in front on surface or in reces, supplying andfixing suitable size gi box with modular plate and cover infront on surface or in recess including providing and fixing 6pin 15 by 16 and 5by 6 amps, installation testing andcommissioning of ceiling fan including the down rods ofstandard length, installation of exhaust fan upto 450 mmsweep in the existing opening including making the hole tosuit the size of the above fan making good the damagecoonection testing commissioning etc, extra for fixinglouvers shutters complete with frame for a exhaust, supplying and fixing following way single pole and neutral, supplying and fixing following way prewired tp and n mcbdistribution board, supplying and fixing following wayssurface, providing and fixing following rating, supplyingand fixing 5 amps to 32 amps rating, supplying and fixingfollowing rating and double pole having senstivity crrent upto 300 ma, supplying and fixing 20 amps and 240voltsand spn industrial type socket outlet, providing fixing mpoint v danger notice plate of 200 mm x 150 mm, earthingwith g i earth pipe 4 point 5 mtr long, earthing with g iearth plate 600mm x 600 mm x 6 mm thick includingaccessories, earthing with copper earth plate 600mm x 600mm x 3 mm thick including accessories, providing andfixing 25 mm x 5 mm g i earth strip from earth electrode asrequired, providing and fixing 6 swg dia gi wire on surfaceor in recess for loop earthing as required, supplying thefollowing lighting fixtures including lamps at site rate shallinclude all taxes and duties transportation etc complete, 12inch dia 1 phase exhaust fan 1400 rpm, 2x18 watt cfllight fixture as per wipro cat no wcp 36218 sgw or asequivalent, 48 inch dia 1200 sweep ceiling fan, providingand fixing white vitereous china pedestal type water closeteuropean type w c pan with seat as lid10 litre low levelwhite, providing and fixing wash basin with ci brackets15mm brass pillar taps 32mm cp brass waste of standardpattern, providing and fixing flexible pvc waste pipe forsink or wash basin including pvc waste fittings complete 32mm dia, providing and fixing flexible pvc waste pipe forsink or wash basin including pvc waste fittings complete 40mm dia, providing and fixing 600 x 450 mm bevelled edgemirror of superior glass, providing and fixing viterous chinatoilet paper holder, providing and fixing stainless steel a isi304, providing and fixing chlorinate polyvinyl chloride withclamps at 1 point 00 m, providing and fixing chlorinatepolyvinyl chloride cpvc pipes having thermal stability withclamps at 1 point 50 m, providing and fixing chlorinatepolyvinyl chloride cpvcpipes having thermal stability for hotcold water with clamps at 2 point 00 m, providing andfixing chlorinate polyvinyl chloride cpvc pipes havingthermal stability for hot and cold water supply including allcpvc plain and brass threaded, providing and fixing gunmetal gate valve with ci approved quality, providing andfixing unplasticised pvc connection pipe with brass unions, providing and fixing cp brass bib cock of approved qualityconforming, providing and fixing cp brass long nose bibcock of approved quality conforming to is standards andweighing not less than 810 gms, providing and fixing brassstop cock of approved quality 15mm nominal bore, providing and fixing cp brass shower rose with 15 mm inlet100 mm dia, providing and fixing of cp brass health faucetfor ablution with 1 meter long pvc tube, providing andfixing of 32 mm dia cp brass bottle trap with 190 mm longwall connection pipe in place of pvc waste pipe for wash //bid details3 / 105 basin discharge, providing and fixing of 600 mm long c pbrass towel rail complete with cp brass brackets, providingand fixing of 15 mm dia inlet cp brass adjustable showerwith 190 mm long shower arm complete with flange

Central Government / Public Sector

TRN :34899642 | 13 Aug, 2025

Tender Value : 8.50 Lacs

Jaipur - Rajasthan

Tender for gem bids for renovation, group b wiring for light point wiring for light or power plugwith 2x4 sq mm frls wiring for light or power plug with4x4 sq mm frls wiring for circuit or submain wiring ofsize 2 x 15 sq mm and 1 x 15 sq mm earth wire wiringfor circuit or submain wiring of size 2 x 25 sq mm and 1 x25 sq mm earth wire wiring for circuit or submain wiringof size 4 x 25 sq mm and 2 x 25 sq mm earth wire supplying and drawing of 3 x 15 sq mm sizes of frls supplying and drawing of 4 x 15 sq mm sizes of frls supplying and drawing of 5 x 15 sq mm sizes of frls supplying and drawing of 6 x 15 sq mm sizes of frls supplying and drawing of 3 x 25 sq mm sizes of frls supplying and drawing of 6 x 25 sq mm sizes of frls supplying and drawing of 3 x 4 sq mm sizes of frls supplying and drawing of 6 x 4 sq mm sizes of frls supplying and fixing of 20 mm size of steel conduit supplying and fixing of 25 mm size of steel conduit supplying and fixing two module stepped type electronicfan regulator supplying and fixing modular blanking plate supplying and fixing suitable size gi box with 3 pin 5 or 6amps modular socket supplying and fixing suitable size gibox with 6 pin 5 or 6 and 15 or 16 amps providing andfixing of s type or fastner type fan hook supplying andfixing of 1 or 2 module 75 mm x 75 mm size or modules gibox supplying and fixing of 3 module 100 mm x 75 mmsize or modules gi box supplying and fixing of 4 module125 mm x 75 mm size or modules gi box supplying andfixing of 6 module 200 mm x 75 mm size or modules gi box supplying and fixing of 8 module 125 mm x 125 mm sizeor modules gi box supplying and fixing of 12 module 200mm x 150 mm size or modules gi box supplying and fixing5 or 6 a switch modular supplying and fixing 15 or 16 aswitch modular supplying and fixing 3 pin 5 or 6 a socket bid number gem2025b6477954 dated 21-07-2025 bid document1 57 1 1 outlet modular, supplying and fixing 6 pin 15 or 16 a socketoutlet modular, supplying and fixing modular bell push, supplying and fixing dp sheet steel enclosure, providingand testing ding dong type sound two module call bell, dismentalling of 1200 mm ceiling fan from hostel rooms, itc of above existing 1200mm ceiling fan, dismentallingservicing and complete repairing other than rewinding anditc of 300 mm exhaust fan, dismentalling serviceing andrepairing including rewinding and itc of 300 mm exhaustfan, dismentalling servicing and complete repairing otherthan rewinding and itc of 450 mm exhaust fan, dismentalling serviceing and repairing including rewindingand itc of 450 mm exhaust fan, supplying and fixing380mm sweep 900 rpm heavy duty tourbo force exhaustfan, sitc ip20 18 20 watt led batten type integrated lightfixture, supplying and fixing of vertical type 35 litrecapacity 2000 watt water storage electric geyser, supplyingand fixing of vertical type 15 litre capacity 2000 watt waterstorage electric geyser, sitc of ip 40 led surface mountedround smd mid power led 18w downlight, sitc ip20 10watt led batten type integrated light fixture, sitc of 400mm sweep oscillating type wall mounted cabin fan, installation of upto 2 tr capacity split ac units, pdg andfixing 1 by 4 inch dia copper refrigerant piping, pdg andfixing 5 by 8 inch dia copper refrigerant piping, provision oftop up or additional charging of r-22 or 32 gas, s fsuitable size ms stand for placement of split type acoutdoor unit, providing and fixing 20 mm dia heavy dutypvc pipe, supplying and fixing 25 amp moduler type starter, supplying and fixing of 3 x 2.5 sq mm pvc insulated andfrls, repairing and painting of existing 3 mtr heightgalvanised mild steel pole, repairing and painting ofexisting 7 mtr height galvanised mild steel pole, supplyinstallation testing commissioning of led post top type 27watt with ip 65, sitc of 18 watt energy efficient led type12 inch size polycarbonate globe fittings, sitc of 50 wattenergy efficient led flood light luminaire with inbuilt highpower leds, supplying and laying of 63 mm dia od 63 mmand id 51 mm nominal size dwc hdpe pipe, laying andfixing of one number pvc xlpe insulated and pvc sheathedxlpe power cable of 1.1 kv grade of upto 35 sq. mm onsurface, laying and fixing of one number pvc xlpeinsulated and pvc sheathed xlpe power cable of 1.1 kvgrade of upto 35 sq. mm in pipe, laying and fixing of onenumber pvc xlpe insulated and pvc sheathed xlpe powercable of 1.1 kv grade of upto 35 sq. mm on cable tray, laying and fixing of one number pvc xlpe insulated andpvc sheathed xlpe power cable of 1.1 kv grade of upto 35sq. mm in ground, laying and fixing of one number pvcxlpe insulated and pvc sheathed xlpe power cable of 1.1kv grade of upto 35 sq. mm in ground additional, supplyingand making end termination with brass compression glandand aluminium lugs for 2 x 6 sq mm 22mm size, supply of1 no xlpe insulated and pvc sheathed power cable of 1point 1 kv grade of size 2 x 6 sqmm aluminium conductorarmoured cable, providing and fixing 6 swg dia gi wire onsurface or in recess for loop earthing, supplying and fixingdigital weekly programmable time switch astronomicalweekly programmable alongwith 10 amp 3 pole powercontractor, providing laying and fixing 50 mm dia gi pipemedium class in ground complete with gi fittings includingfinishing etc as required, providing laying and fixing 32 mmdia gi pipe medium class in ground complete with gi fittingsincluding finishing etc as required, supply and fixing 40 //bid details2 / 57 mm dia b class gi pipe 500 mm length with 150 mm x 150mm x 3mm thick ms base plate, repairing of dust andvermin proof cubical out door double door type floormounted, sitc of self contained drinking water cooler withnon cfc refrigerant energy efficient compressor

State Government

TRN :34899847 | 12 Aug, 2025

Tender Value : 0

Neemuch - Madhya Pradesh

Tender for gem bids for video conferencing camera / web camera v2 q2, television tv v2 q2, all in one pc v2 q2, onlineups v2 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, oem authorization certificate, oem annualturnover, additional doc 1 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6461391; /dated: 22-07-2025 & & / bid document1 / 22 ; 9; 9 d d, , l l -- / / number of days for which bidwould be auto--extended7 n %n % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 q q /primary product categoryvideo conferencing camera / web camera v2 r r & t & t /time allowed for technicalclarifications during technical evaluation2 days u u b b v v u u 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno r r v v /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount25000 /epbg detail b /requirednoa. . z % & 4& % & % 4 > n 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , \ u < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : collector and sacretory district e-governance societycollector neemuch, general administration department madhya pradesh, n/a, collector neemuch /splitting2 / 22 ; / bid splitting not applied. /mse purchase preference /mse purchase preferenceno /mii purchase preference /mii purchase preferenceno1. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. video conferencing camera / web camera v2 3 pieces bis requiredyes t t /technical specifications t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescription/applicationintended applicationa video conferencing camera are digital cameraspecially designed for use in video conferencingapplication.genric descriptionvideo conferencing cameragenricptz functionyes e-ptz only, yes high precision motorized-ptzor higherresolution maximum eachcamera4k hd 3840 x 2160 pixel or higherpan range minimum0pan range maximum0tilt range minimum0tilt range maximum0zoom range opticalmaximum2x, 3x, 4x, 5x, 10x, 12x, 16x, 20x, 22x, 30x, na orhigherzoom range digital maximummore than 3x - 6x, more than 6x - 9x, more than 9x -12x, 12x - 16x or higherfield of view degreemore than 105-1203 / 22 maximum frame ratesframesper second supported30, 50, 60 or highernumber of mics2control / image processing /focusing featuresnaconnectivityconnectivity outputusb uvc, uacfeature/accessoriessalient featurescmos sensoroptional features/accessoriesnaoperatingconditionsminimum operatingtemperature degree c-10, -5, 0 or lowermaximum operatingtemperature degree c40, 45, 50, 60, 70 or higherrelative humidity noncondensing at 40 deg c %rh80 or loweringress protectionip21, ip20, na or higherwarranty / servicecomprehensive on sitewarranty year5 or highertime duration for repairing/replace the defect duringwarrantywithin two weeksupply of compatible driversand software includedyesbuyer specificrequirementsonline meeting platformsupported application, softwaremicrosoft teams, zoom, cisco webex, google meetcertification / testreporttype of lab which carried outtest of complete product toprove the conformity of productas per governing specificationcertificate of govt.lab/nabl/ilac accredited.agree to provide all relavantdocuments testreport/suuporting document/reports etc to the buyer at thetime of bidding or on demandyes /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - video conferencing camera / web camera v2 3 pieces specification parameternamebid requirement allowed values4 / 22 package 2 supported audio&video, 3 supported operatingsystem 4 camera1 it should be all-in-one video bar with integrated microphones, speakers, 4k camera with privacy shutter, 2 it should support audio andvideo over the usb, 3 it should support latest windows os and macos 4 integrated uhd 4k 2160 p or higher capture resolution, 90 - 120-degreefov or better, 5x digital zoom or better, group framing, automaticspeaker tracking preferable to have additional ai based features5microphone, 6 speaker5 inbuilt beam array 4-6 or more microphones to capture sound. it shouldsupport full-duplex conversations, acoustic echo cancellation andbackground noise suppression. microphone pickup range should be 15 ft ormore, 100 hz - 15 khz frequency response or better bidder needs to supplywired one external expansion microphone from same oem with accessories.6 inbuilt stereo speakers, output shall be 90 db or better7 other interfaces 8 audiofeatures7 min. 1 x usb 3.0 type c, audio-in/line-in port wi-fi wireless networking formanageability and to connect with byom wireless dongle optional. 8 itshould be possible to pair a mobile phone over bluetooth & use all in onevideo bar as the speaker and microphone for the mobile phone. built-inbluetooth 4.2 or better9 video features 10 cable 11drivers9 when two or more people in the same room talk back and forth, systemshall treat them as if they are in a conversation. if the two speakers arentclose, the usb video bar displays a split screen showing the two peakersoptional. 10 minimum 5 m cable to be supplied to connect the aio withthe usb video bar from same oem 11 smart-camera experiences are builtin - no drivers or software needed plug and play support12 cloud platform certification, 13warranty, 14all requiredspecification12 device should be certified with zoom rooms, microsoft teams, googlemeet etc. cloud platform. bidder compliance certificate for at least twocloud-based platform should be provided. 13 the complete solution shouldbe from the same oem with a 5-year warranty from day one. the productshould bis/ul, ce, fcc, rohs certified. 14 all required specification as perscope of workspecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345television tv v2 3 set bis requiredyes t t /technical specifications* t / as per gem category speci cation5 / 22 /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericdescriptiona television set or television receiver morecommonly known as tv is an electronic device forthe purpose of receiving of broadcast of video &audio content as per applicable tv broadcast systemlike ntsc/ pal etc. it enable the user to viewing andhearing programs and news etc as broadcasted /television broadcasts and may have additionalcapabilites to view other infomative programs overinternet.intended applicationto receive and play tv broadcast programs. it isdifferent from monitor which is used as output devicein it systems.type/category/class of tvsetsmart tv2display type/technologyled light emitting diode, oled organic light-emitting diode, qled quantum dot led or highernominal screen size rangeinchesmore than 38 inch - upto 46 inchaudio power minimum10w x 2, 12w x 2, 20w x 2 or higherperformance &featuresmaximum resolutionpixels supported4k ultra hd uhd: 3840x2160, 8k ultra hd:7680x4320 or higherstatic contrast ratio1200 : 1, 1300 : 1, 1400 : 1, 1500 : 1, 1600 : 1, 1700 :1, 1800 : 1, 1900 : 1, 2000 : 1, 2500 : 1, 3000 : 1, 3500 : 1, 4000 : 1, 4500 : 1, 5000 : 1 or highertypical brightness nits300 - 399, 400 - 499, 500 -699, 700-999 or highersalient featureinbuilt speakers, table mountlegs, wall mountbracketoptional featurebuilt-in set-top box, hdr high dynamic range, screen mirroring, built-in wi-fi, wi-fi direct, bluetooth, lanpowerinput power rated voltage230 +-10%, 50hzbee star rating1 star, 2 star, 3 star, 4 star, 5 star or higherrf input &connectivity portsinput portrf input, 1-hdmi port, 1-usb port, 1-vga port, 1-ethernet portaccessoriesaccessories included in thescope of supplyremote control, wall mounting bracket, standoptional accessoriesconnecting cables hdmi, nawarranty, installationcommissioningcomprehensive standardwarrantyyears1 or higherwarranty on display onlyyears3 or highercertification / testreporttype of lab which carried outtest of complete product toprove the conformity of productas per governing specificationcertificate of govt.lab/nabl/ilac accredited6 / 22 agree to provide all relavantdocuments testreport/suuporting document/reports etc to the buyer at thetime of bidding or on demandyes /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - television tv v2 3 set specification parameternamebid requirement allowed values1 display size, 2 viewingangle, 3 response time, 4input ports, 5output ports1 43 inches or above, 2 178178, 3 9 ms or better, 4 hdmi-3, usb 2.0-1, rj45-1, 5 digital audio out, headphone out6 special features, 7accessories6 smart share/screen share, snmp support to take control of display, wake on lan, built in quad core media player, 7 table stand/wall mount, remote and standard cables8 power supply, 9 powertype, 10 power consumption, 11 certificates8power supply, 9built-in power, 10 120w or less, 11 bis, ul, iso 9001, iso 14001, iso 45001:201812 warranty, 13 operatingsystem, 14 service12 5 years on site, 13 web os/android/taizen with latest os release, 14oem should have registered direct service center in mp to manageservice at district level with toll free number & manufacturing setup in india.15 hdmi cable/ other, 16 allrequired specification15 additional hdmi /other cable to conenct above with aio lengthminimum 10 mtr capable to transfer audio and video both, 16 all requiredspecification as per scope of work bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345all in one pc v2 3 pieces bis requiredyes t t /technical specifications* t / as per gem category speci cation7 / 22 /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescriptiondescription of storeall in one personal computers consist of a mouse, keyboard, display with web camera, inbuilt/integrated microphone array and speakers, aninternal cpu with connection cables and poweradapter with 1 year standard warrantyprocessor numberintel core i5-13500t, intel core i5-14500t, intel corei5-14400, intel core i5-13600t, intel core i7-13700t, intel core i9 12900t, intel core i7-12700, intel corei7-14700t, intel core i5-13500, intel core i5-14500, intel core i9-12900, intel core i7-13700, intel core i7-14700, intel core i9-13900t, intel core i9-13900 orhigherinput devicesmouse connectivitywired, wireless or higherkeyboard connectivitywired, wireless or highertype of keyboardstandard, bilingual or highergraphicsgraphics typeintegratedoperating systemoperating system factorypreloaded withcertificationwindows 11 professionalmemorytype of ramddr4, ddr5 or higherram size gb16storagetype of storage installedwith the systemnvme ssdstorage capacity in gb1024displaydisplay size - diagonal ininches58.1 - 63 22.87 - 24.8panel technologyin plane switching ips or higherportsnumber of ports1-hdmi, 1-dp, universal audio jack, 1- rj-4510/100/1000 ethernet port, 1-usb 3.1 gen 2 type a, 2-usb 3.1 gen 2 type a, 2-usb 3.1 gen 1 type a, 1-usb 3.1 gen 1 type cgenericstandheight adjustableadditional specification parameters - all in one pc v2 3 pieces specification parameternamebid requirement allowed valuesdisplay resolution, displaysizedisplay resolution - min. 1920 x 1080, display size - 23 inch or higherspeaker, connectivityspeaker - dual 2 w speakers or more, connectivity - bluetooth, wi-fi andethernet8 / 22 number of usb 2.0 ports, mouse and keyboardusb 2.0 ports - min. 03, mouse and keyboard - wirelessanti-virus, oem warrantyanti-virus - required with 05-year license, oem warranty - 5 years on siteadditional feature, all requiredspecificationadditional feature - provision to connect hdmi smart tv for audio/video, allrequired specification as per scope of workspecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345online ups v2 3 pieces t t /technical specifications* t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericrating in kva1.0 kvaswitching technologyigbt-pwminput voltageac single phase 160v - 260v 50hzoutput voltageac single phase 230v +/-1% 50 hzwarranty for ups years3, 4, 5 or higherbattery/backupbankbattery/backup bankprovided with online ups hint: in case the ups issupplied with battery, seller shall ensurecompliance to the gstrates as perrecommendations made inthe 45th meeting of gstcouncil dated 17th sep2021 with batterytype of battery hint: na incase battery not providedsmf-vrla conforming to jisc:8702pt.i, ii&iii, stationary lead acid batteries with tubular positiveplates in monobloc container conforming tois:13369:1992 latest9 / 22 backup time minuteshint: na in case batterynot provided30 minutesminimum guaranteed vah1600 x per kva x per hour of backup timewarranty for batteryyears by batterymanufucaturer/brand hint:na in case battery notprovided3 or higheraccessories with batterynainstallation andcommissioning orserviceinstallation and commissioning covered in the scope ofsupplyprovidedafter sales service turnaround timewithin 48 hours, within 7 dayspreventive maintenance hint:mention timeline if provided, na if not providedmonthly, bi-monthly, quarterly, half yearly, yearly, naor higherother services providedpan india service support on 24 x 7 basisperformance /functionalinbuilt isolation transformerwithoutoverall efficiency %>/ 80% & <90% with inbuilt isolation transformeroverload limit20% overload for minimum 10 minute, 20% overloadfor minimum 5 minute, 50% overload for minimum 1minute, 50% overload for minimum 3 secondstotal harmonic distortionthd%2% maximum @ 100% linear loadother functional featurescrest factor on full non-linear load is not less than 3:1accessoriesaccessoriescabling 6 meters input upto 3m and output upto3m, rack for batteriessalient featuresprotectionprotection for under voltage at battery terminal, protection of over voltagemeteringinput voltage, output voltage, input current, outputcurrentalarms and indicationsindicator for mains presence, indicator for batterycharging and dischargingadditional featurespure sinewave ac outputdesign /constructiontype of design /constructionfloor standingenclosure mm1.2 mm minimum thickness of m.s. sheet duly powdercoateddegree of protectionip21, ip20 or higherother constructional featuresbattery on/off mcb, mains on/off mcb /speci cation t t /specificationname b b r r /bid requirementallowed values10 / 22 operatingconditionsminimum operatingtemperature0, -5 or lower degree celsiusmaximum operatingtemperature40, 45, 50 or higher degree celsiusrelative humidity noncondensing at 40 deg c90, 95 or higher percentbuyer specificrequirementenvironmental test reportrequirementsnabattery test reportnaintended applicationsnetwork it equipmentother requirementsrohs compliancereports andcertificationagree to provide all relevantdocuments testreports/supporting document/reports etc to the buyer at thetime of bidding or on demandyesas per meity government ofindia guidelines ups shall havevalid bis crs certifications asapplicableyes for ups rating upto 10kva /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - online ups v2 3 pieces specification parameternamebid requirement allowed values1 power output wattage, 2ups type, 3 outputwaveform1 min. 700w, 2 online, 3 pure sine wave ac output, manual bypassfacility4battery voltage, 5 batterycapacity, efficiency4 12v/24v dc, 7ah - 18ah, 5 more than or equal to 85%6overload protection 7 allrequired specification6yes, with auto shutdown 7 all required specification as per scope of work* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays11 / 22 vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac3455. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydaysbuyer added bid specific additional scope of work5. .5. ./s.no.document titledescriptionn %n % 4 4 /applicable i.r.o. items1specificationdocumentviewspecification documentall in one pc v23the uploaded document only contains buyer specific additional scope of work and / or drawings for the bid items addedwith due approval of buyer s competent authority. buyer has certified that these additional scope and drawings aregeneralized and would not lead to any restrictive bidding.special terms and conditions-version:1 effective from 22-11-2024 for category video conferencingcamera / web camera v21. note to buyers:the central ministries/ departments and other government buyers, as applicable, shall note that thiscategory is covered under scheme - ii compulsory registration scheme of bis bureau of indianstandards.compulsory registration of goods / articles in this category shall conform to is 616: 2017 and shall bearthe standard mark under a license from bureau of indian standards as per scheme-ii of schedule-ii ofbureau of indian standardsconformity assessment regulations, 2018.buyer shall verify and confirm compliance with the applicable bis order during the procurement andfulfilment process.note to sellers:sellers shall offer and supply products conforming to the corresponding indian standard and mandatorilyregistration as per scheme-2 of bis.non-compliance shall result in action as per gem im policy.buyers and sellers may refer to the relevant s.o at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-ii-registration-scheme/ special terms and conditions-version:2 effective from 16-10-2024 for category television tv v21. note to buyers:the central ministries/ departments and other government buyers, as applicable, shall note that thiscategory is covered under scheme - ii compulsory registration scheme of bis bureau of indianstandards.compulsory registration of goods / articles in this category shall conform to is 616: 2017 and shall bearthe standard mark under a license from the bureau of indian standards as per scheme-ii of schedule-iiof bureau of indian standardsconformity assessment regulations, 2018.12 / 22 buyer shall verify and confirm compliance with the applicable bis order during the procurement andfulfillment process.buyer shall validate and confirm the comprehensive warranty terms and conditions during theprocurement process. note to sellers:sellers shall offer and supply products conforming to the corresponding indian standard and mandatorilyregistration as per scheme-2 of bis.non-compliance shall result in action as per gem im policy.buyers and sellers may refer to the relevant s.o at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-ii-registration-scheme/ special terms and conditions-version:3 effective from 26-03-2025 for category all in one pc v21. for buyers:1product verificationa unique device serial number shall be provided by the seller at the time ofsupply, which is mentioned on the product. the buyer/consignee shall beable to verify the complete product details, including configuration, throughthe oem website. the buyer/consignee should be able to perform theseverifications without needing to create an account on the oem website.13 / 22 .operating systema. there is no requirement that the oem of the all in one pc should be adevice partner of microsoft and holding a microsoft authorizationform maf from the software provider.b. microsoft os may be sourced directly from microsoft by oems holdingdevice partner status, and those not holding device partner statusmay source from authorized distributors, i.e., ingram/reddington andtheir authorized channel partners.c. buyers may ensure that maf shall not be made a mandatoryrequirement in bids.d. if supplies are made as per brands of oems who are global devicepartners, then the serial number of the machine supplied can be usedto check the details of the product from the website of the oem.e. in the case of local device partners of microsoft, os details such asthe digital key number should be produced with supplies, and thebuyer may verify them from microsoft.f. in case of other oems who are sourcing from authorized distributorsof microsoft, reddington, or ingram, a copy of the invoice whichcontains the relevant serial number of windows os shall besubmitted with supplies, and the buyer/consignee can verify the samefrom the os server website or by telephone, or both.g. in respect of verification of os, the consignee shall take necessarysteps at the time of acceptance. for device partner machines, buyerscan check the all in one pc oem website to verify the os by enteringthe pcs serial number and part code number. for entities that are notdevice partners and source os from distributors networks, they mayverify the serial number through the microsoft website or bytelephone, or both.h. in case the product offered is with a dos or linux operating system, such verification of os shall not be applicable.i. buyer shall request for windows hardware compatibility certificatefor window operating system to ensure the supply hardware iscompatible with windows operating system14 / 22 .requirement of oemlogobuyers are advised to note that incorporating a condition stipulating an oemlogo on the motherboard is restrictive and may not be incorporated into thebids.4.warrantya. the buyer may ensure that as soon as supplies are received, arequest for a warranty certificate is made, along with logging into theoem website/call center to verify the certificate.b. the product in gem marketplace direct purchase & l1 purchasecomes with a minimum standard warranty of one year. in case theseller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in suchcase higher warranty offered shall prevail/supersede the minimumone year warranty.15 / 22 .om related to mii, localcontent and meityadvice on modeltechnical specificationsbuyers are requested to refer to various oms pertaining to dpiit and meity, as issued from time to time, while making procurement and follow relevantprovisions as applicable.6.check points duringacceptance of suppliesbefore generating the consignee receipt and acceptance certificate crac, the consignee may inspect the system condition and verify that it complieswith the agreed specifications and configurations. in the case of a largenumber of units to be procured, then the buyer may opt for bidding andaccordingly stipulate conditions regarding installation, inspection byconsignees/inspection agency. consignees who receive the supplies shouldbe vigilant and should complete checking to ensure that there is no scopefor the supply of refurbished products. at the time of receiving supplies, theconsignee may adhere to the following to ensure that any discrepancies insupplies can be flagged, taken into account, and reflected while generatingthe crac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon andchecked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settingsand can be verified from the oem website. the above points are forguidance, and the buyer/consignee may take steps consideredsuitable by them for checking at the consignee end beforeacceptance of systems.v. an escalation matrix for customer grievance redressal shall beinsisted upon by the buyer from the seller at the time of delivery.16 / 22 .hdd/ssd storageretentionbuyer may add their requirement of retention of securely store all hard diskdrives hdds or solid-state drives ssds used in the all in one pc underatc clause.for sellers:1.oem website link/partno for productverificationthe oem shall share the oem website link with the buyer at the time ofdelivery. the offered model details/configuration should be available ontheir website. a unique device serial number shall also be provided at thetime of supply, which is also mentioned on the product. the buyer/consigneeshall be able to verify the complete product details, including configuration, through the shared oem website link.2.changing or alteringthe configurationseller must refrain from changing or altering the configuration of the factorypre-loaded machine. the machine should be delivered to the consignee inits original, factory-approved configuration.3.warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specifiedwarranty terms. the warranty certificate should be verifiable through theoem website/customer care center.4.compliance ofextended producer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold validepr registration, and the registration number should be reflected in thecatalog parameter. oems shall ensure compliance with all responsibilities asper epr registration applicable from time to time.5.mandatory / statutoryrequirements asapplicableoems shall have to ensure compliance with the mandatory/statutoryrequirements as per the government of india notifications issued from timeto time for hardware and software components, as applicable.6.operating systemit shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems. special terms and conditions-version:1 effective from 06-07-2022 for category online ups v21. in addition to general terms and conditions of gem, the following special t&c shall be applicable foronline ups version 2.0 with reference to installation and commissioning.sellers responsibility: installation and commissioning shall involve all the interconnections, any cablingbetween power source, switch boards within 3 metre range for input power and connecting output power17 / 22 in the scope of seller. buyers responsibility: buyer will ensure well ventilated/covered site/room having requisite powerpoints/distribution board to provide input power to ups as well as to take out power from ups within 3metre of the location of ups placement.the above is not applicable for the stores supplied without installation and commisioning.note: the above is indicative and any incidental requirement related to above responsibilities shall alsobe considered in the responsibilities of buyer/seller as applicable.5 5 : : a a/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericdata sheet of the products offered in the bid, are to be uploaded along with the bid documents. buyerscan match and verify the data sheet with the product specifications offered. in case of any unexplainedmismatch of technical parameters, the bid is liable for rejection.3. scope of supplyscope of supply bid price to include all cost components : supply installation testing andcommissioning of goods4. turnoverbidder turn over criteria: the minimum average annual financial turnover of the bidder during the lastthree years, ending on 31st march of the previous financial year, should be as indicated in the biddocument. documentary evidence in the form of certified audited balance sheets of relevant periods or acertificate from the chartered accountant / cost accountant indicating the turnover details for therelevant period shall be uploaded with the bid. in case the date of constitution / incorporation of thebidder is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria.5. turnoveroem turn over criteria: the minimum average annual financial turnover of the oem of the offered productduring the last three years, ending on 31st march of the previous financial year, should be as indicated inthe bid document. documentary evidence in the form of certified audited balance sheets of relevantperiods or a certificate from the chartered accountant / cost accountant indicating the turnover details forthe relevant period shall be uploaded with the bid. in case the date of constitution / incorporation of theoem is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria. in case of bunch bids, the oem ofcategory related to primary product having highest bid value should meet this criterion.6. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.18 / 22 . certificatesiso 9001: the bidder or the oem of the offered products must have iso 9001 certification.8. service & supportavailability of service centres: bidder/oem must have a functional service centre in the state of eachconsignees location in case of carry-in warranty. not applicable in case of goods having on-sitewarranty. if service center is not already there at the time of bidding, successful bidder / oem shall haveto establish one within 30 days of award of contract. payment shall be released only after submission ofdocumentary evidence of having functional service centre.9. service & supportdedicated /toll free telephone no. for service support : bidder/oem must have dedicated/toll freetelephone no. for service support.10. service & supportescalation matrix for service support : bidder/oem must provide escalation matrix of telephone numbersfor service support.11. buyer added bid specific atcbuyer added text based atc clauses1. it must be noted that normally all correspondence and transactions will be made only with the parties w hose bid have been accepted and not with anybody else. consortium not allowed in any form.2. bidder has to submit technical compliance on oem letter head.3. the manufacturer of the all in one 4k usb video bar and cloud based platform for video conferencing should have at least five technical support personnel stationed directly in madhya pradesh to ensure prom pt technical assistance. official hr documentation is mandatory.4. the manufacturer of the all in one 4k usb video bar and cloud based platform for video conferencing must establish a direct/authorized service center in madhya pradesh to offer immediate support. valid do cumentation for service center must be provided on the oem letterhead.5. the manufacturer for the all in one 4k usb video bar and cloud based platform for video conferencing must have

Central Government/Public Sector

TRN :34905718 | 12 Aug, 2025

Tender Value : 7.50 Crore

Mumbai - Maharashtra

Tender for gem bids for custom bid for services - vacuum blasting with grit externalfor all whether decks, custom bid for services - blasting ofexternal areas with copper slag, custom bid for services -blasting of internal areas with grit, custom bid for services- blasting of external with copper slag for loose seats andpillars, custom bid for services - copper slag blasting ofunderwater hull area, custom bid for services - internalarea painting after blasting, custom bid for services -external area painting after blasting, custom bid forservices - high pressure jet washing with fresh water, custom bid for services - low pressure jet washing withfresh water, custom bid for services - sweep blasting withcopper slag external, custom bid for services - spotblasting with copper slag, custom bid for services - touchup painting external per coat, custom bid for services -touch up painting internal per coat, custom bid forservices - degreasing and chemical cleaning, custom bidfor services - staging above 10 ft in sqm, custom bid forservices - stripe coat painting internal per coat, custombid for services - feathuring internal and external area, custom bid for services - hydro blasting above water hullweather decks and superstructure, custom bid for services- surface preparation by papering and one coat of primer, custom bid for services - surface preparation as perspecification st2 and one coat of primer, custom bid forservices - surface preparation as per specification st3 andone coat of primer, custom bid for services - cleaning thesurface, papering and application of subsequent coat ofpaint, custom bid for services - piping surface preparationby thoroughly degreasing roughened with emery paperagain degreasing plus one coat of primer on pipes pipe diaupto 50m, custom bid for services - piping surfacepreparation by thoroughly degreasing roughened withemery paper again degreasing plus one coat of primer onpipes pipe dia 51 to 150m, custom bid for services - pipingsurface preparation by thoroughly degreasing roughenedwith emery paper again degreasing plus one coat of primeron pipes pipe dia 151 to 350m, custom bid for services -piping cleaning the surface papering and application ofsubsequent coat of paint pipe dia up to 50mm, custom bidfor services - piping cleaning the surface papering andapplication of subsequent coat of paint pipe dia up to 51 to150mm, custom bid for services - piping cleaning thesurface papering and application of subsequent coat of paintpipe dia up to 151 to 350mm, custom bid for services -cable trays surface preparation by papering plus one coatof primer upto 100mm, custom bid for services - cabletrays surface preparation by papering plus one coat ofprimer upto 101 to 200mm, custom bid for services - cabletrays surface preparation by papering plus one coat ofprimer beyond 201mm, custom bid for services - cabletrays cleaning the surface papering and application ofsubsequent coat of painting upto 100mm, custom bid forservices - cable trays cleaning the surface papering andapplication of subsequent coat of painting 101 to 200mm, custom bid for services - cable trays cleaning the surfacepapering and application of subsequent coat of paintingbeyond 201mm, custom bid for services - cleaning andpainting of plain perforated gi sheet ms sheet aluminumsheet and ss sheet per coat

Central Government/Public Sector

TRN :34885853 | 29 Jul, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids forcoir mattress of size 1.83m x 0.9m x 75mm thick comprising of 50mm thick high density coir with hessian border pasted with 25mm , pedestal fan 400mm sweep , wall mounted fan 300mm sweep conforming to is , exhaust fan 300mm sweep conforming to is , triple layer hdpe water storage tank cylindrical vertical with closed top 1000 ltrs capacity conforming to is specification , hdpe tarpaulin 18 ft x 24 ft , mild steel door wire mesh weight not less than 2.20 kg per sqm , led batten surface 4 ft long 18w output 1600 lumens per watt with suitable powder coated frame end caps and connector , led bulb 18w 220-240 volt , app water proofing membrane 3 mm thick 1m wide 10 m long , hdpe tarpaulin 30 ft x 30 ft , security light fitting for 65 watt led , pvc insulated sheathed unarmoured cable 16sqmm 4 core aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , change over switch 63 amp four pole , pvc insulated sheathed unarmoured cable 6sqmm twin core aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , ordinary portland cement 43 grade in hdpe bags of 50kg each confirming to is 269-1976 , coarse sand dimapur sand conforming to is 383 -1978 , coarse aggregate crushed stone 20mm graded conforming to is 383-1979 , bricks sub class b old size best locally available minimum compressive strength 75 kg sqcm water absorption not more than 20 percentage , iron angle 10 ft long thick of size 50mmx50mmx3mm , self tapping screws with ppdm washer 50mm long , ms square pipe 1 inch x 1 inch thickness 5mm , ms square pipe 2 inch x 1 inch thickness 5mm , ms square pipe 2 inch x 2 inch thickness 5mm , ms square pipe 3 inch x 3 inch thickness 5mm , hdpe sand bags of size 14 inch x 36 inch weight not less than 60 gms , plywood commercial 18 19mm bwr 8 ft x 4 ft , plywood commercial bwr grade isi marked of size 8 ft x 4 ft x 12mm thick , synthetic enamel paint high gloss superiour quality white colour , synthetic enamel paint high gloss superiour quality green colour , synthetic enamel paint high gloss superiour quality black colour , synthetic enamel paint high gloss superiour quality red colour , synthetic enamel paint high gloss superiour quality blue colour , synthetic enamel paint high gloss superiour quality yellow colour , thinner , distemper oil emulsion acrylic distemper , painting brush 100mm standard quality , painting brush 75mm standard quality , cp cast copper alloy pillar cock 15mm bore , mcb 32 amp dp 240 volts , pvc insulated sheathed unarmoured cable 10sqmm twin core aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , non skid ceramic coloured tiles of size 600mm x 600mm x 9-10mm thick , metal cutter disc 6 inch dia , metal cutting disc 14 inch dia , welding rod pkt of 100 electrodes , mild steel corrugated galvanised cgi sheet 8 ft x 3 ft x 0.63 mm thick isi marked , mild steel corrugated galvanised cgi sheet 10 ft x 3 ft 0.63 mm thick isi marked , mild steel corrugated galvanised cgi sheet 12 ft x 3 ft 0.63 mm thick isi marked , ppgi ridge cover 1.5 ft wide 0.63mm thick , acrylic sheet 3mm thick for window panes 8 ft x 4 ft , four layer hdpe water storage tank cylindrical vertical with closed top 2000ltrs capacity conforming to is specification , hand gloves , puf gun machine , lead acid battery 12v 180ah

Central Government/Public Sector

TRN :34891878 | 11 Aug, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for entry and mid level desktop computer q2, computermonitor q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno -- 8 8 9 9 : : ; ; / minimum number ofbids required to disable automatic bidextension3 > > ; ;, , @ @ -- / / number of days for which bidwould be auto--extended7 b %b % : : /bid to ra enabledyesb %b % c c /ra quali cation ruleh1-highest priced bid elimination 4 4 /type of bidtwo packet bid4 4 f f /primary product categoryentry and mid level desktop computer g g & i & i /time allowed for technicalclarifications during technical evaluation2 days ; /bid number: gem/2025/b/6459939 /dated: 21-07-2025 & & / bid document1 / 14 q q 8 8 s s q q 4 4 / % % u > u > v v /inspection required byempanelled inspection authority / agenciespre-registered with gemno g g s s /evaluation methoditem wise evaluation/ w & w & /arbitration clauseno /mediation clauseno //bid details /emd detail 8 /requiredno /epbg detail 8 /requiredno /splitting / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes1. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 30% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller is2 / 14 validated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 2. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 3. reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1 g g g g / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under: g / evaluation schedules & / / item/category / quantityschedule 1entry and mid level desktop computer8schedule 2computer monitor15entry and mid level desktop computer 8 pieces i i /technical specifications* i / as per gem category speci cation /speci cation i i /specificationname 8 8 g g /bid requirementallowed valuesprocessordescription of storesdesktop computer with table mount monitor systemwith compatible chipset as per processor make withminimum 6 usb portcomputer typemid levelprocessor numberamd ryzen 5 5600g, intel core i5 12400 or highermotherboardexpansion slots pcie x 12 or higherexpansion slots m dot 2 forwifi1 or highergraphicsgraphics typeintegratedoperating systemfactory pre-loadedoperating system bydesktop oemwindow 11 professionalmemory ramram size memorycard/module in gbcapacity to be installed inthe system16, 32 or higher3 / 14 storagetype of storage installedwith the systemnvme-ssd plus hdd@7200 rpmssd - storage capacity ingb500, 512, 1024, 2048 or higherhdd - storage capacity ingb1000, 2000 or highercabinetbays for optical drive1optical drivedvd r/waudio interface typeuniversal 3.5 mm audio jack support for audio-in andaudio out, audio-in, audio-outportsnumber of usb type a portversion 2 point 04 or highernumber of usb type a portversion 3 point 2 gen 13, 4, 5, 6 or highernumber of usb ports type c1, 2 or highernumber of vga ports1 or highernumber of hdmi ports1 or highernumber of dp ports1 or highermonitoravailibility of monitoryes as per is 13252 part 1display technologyled backlit lcd liquid crystal displayscreen size in cms53.1 - 58 20.91 - 22.83, 58.1 - 63 22.87 - 24.8maximum resolution pixels1920 x 1080 full hdmonitor porthdmi, vgaintegrated webcam with micyes, noinput devicesmouse connectivityusb wired, wireless or higherkeyboard connectivityusb wired, wireless or highertype of keyboardstandardwarrantyon site oem warranty inyear3, 4, 5 or higher /speci cation i i /specificationname 8 8 g g /bid requirementallowed values //b y b y /consignees/reporting officer and quantity4 / 14 :. .:. ./s.no. //b y b y /consigneereporting/officer /address /quantity /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant830computer monitor 15 pieces i i /technical specifications* i / as per gem category speci cation /speci cation i i /specificationname 8 8 g g /bid requirementallowed valuesstandardsdescription of storea monitor is an electronic visual display device thatoutputs the video signal generated by a computer. itis essentially a screen that shows text, images, andvideos, allowing users to interact with the computersgraphical user interface gui. it comes with a tablemount for support, a power cable and/or adapter, ports for connectivity and 1 year minimum on sitewarrantyconstructionpanel typein plane switching ips or higherdisplay technologyled backlit lcd liquid crystal displayscreen form factorflatdimensionmaximum resolutionpixels1366 x 768 hd, 1440 x 900, 1920 x 1080 full hdscreen size in cm48.1 - 53 18.94 - 20.87, 53.1 - 58 20.91 - 22.83brightness in nits301 to 350, 350 to 500 or higherconnectivity portsinput port1- hdmi port, 1- vga port //b y b y /consignees/reporting officer and quantity:. .:. ./s.no. //b y b y /consigneereporting/officer /address /quantity /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant1530special terms and conditions-version:5 effective from 06-06-2025 for category entry and mid leveldesktop computer5 / 14 . for buyers:the category has been created in accordance with the model technical specification issued by theministry of electronics and information technology meity vide letter no. w-43/4/2020-iphw dated 19thaugust 2024, and is based on the parameters defined therein. the specifications applicable to thiscategory are as per the meity model technical specification dated 19th august 2024. accordingly, buyersshall not specify or mandate any particular processor, processor brand, or manufacturer in the additionalterms and conditions atc. in this context, reference may also be made to clause 2e of the gemgeneral terms and conditions gtc, which inter alia states: the specifications shall identify the keyparameters defining the products with all necessary validations related to configuration, type of data, restrictions, range / allowed values, allowed units etc. sellers as well as buyers while offering / buying thegoods / services shall have to comply with the validation rules / restrictions provided for in the categoryspecification. buyers / sellers cannot add parameters and / or drop down values not provided for incategory specification. in view of the above, buyers are not permitted to amend or modify any technicalspecification through the additional terms and conditions, and must ensure full compliance with thepredefined category specifications1productverificationa unique device serial number shall be provided by the seller at the time of supply, which is mentioned on the product. the buyer/consignee shall be able to verify thecomplete product details, including configuration, through the oem website. thebuyer/consignee should be able to perform these verifications without needing tocreate an account on the oem website.2operatingsystem1. there is no requirement that the oem of the desktop systems should be adevice partner of microsoft and holding a microsoft authorization form maffrom the software provider.2. microsoft os may be sourced directly from microsoft by oems holding devicepartner status, and those not holding device partner status may source fromauthorized distributors, i.e., ingram/reddington and their authorized channelpartners.3. buyers may ensure that maf shall not be made a mandatory requirement inbids.4. if supplies are made as per brands of oems who are global device partners, then the serial number of the machine supplied can be used to check thedetails of the product from the website of the oem.5. in the case of local device partners of microsoft, os details such as the digitalkey number should be produced with supplies, and the buyer may verify themfrom microsoft.6. in case of other oems who are sourcing from authorized distributors ofmicrosoft, reddington, or ingram, a copy of the invoice which contains therelevant serial number of windows os shall be submitted with supplies, andthe buyer/consignee can verify the same from the os server website or bytelephone, or both.7. in respect of verification of os, the consignee shall take necessary steps at thetime of acceptance. for device partner machines, buyers can check thecomputer oem website to verify the os by entering the pcs serial number andpart code number. for entities that are not device partners and source os fromdistributors networks, they may verify the serial number through the microsoftwebsite or by telephone, or both.8. in case the product offered is with a dos or linux operating system, suchverification of os shall not be applicable.9. buyer shall request for windows hardware compatibility certificate for windowoperating system to ensure the supplied hardware is compatible with windowsoperating system3requirementof oem logo buyers are advised to note that incorporating a condition stipulating an oem logo onthe motherboard is restrictive and may not be incorporated into the bids.6 / 14 processorsintel and amd processors are added as per model technical specification of desktopcomputer issued by ministry of electronics and information technology meity-iphwdivision w-43/4/2020 dated 19 aug 20245scope ofinstallationinstallation requirements shall be indicated in the bid by the buyer under theinstallation, commissioning and testing in bid ict clause. in case installation isspecified in the bid, it shall be the responsibility of the seller to ensure that allsystems are installed and satisfactory working is shown to the consignee orauthorized representative of the buyer. however, in case of direct and l1 purchase, installation of the computer system by the seller/oem is mandatory. installation doesnot include the supply of antivirus, ms office, etc., which are to be separatelyprocured by the buyer only.6buyer/consignee obligationsrelating toinstallationit is necessary that the buyer/consignee provide the seller or authorizedrepresentative access to locations, areas, or rooms for the installation of equipment.the seller or authorized representative will install systems and connect them toexisting power lines/networking at no additional charge. the buyer/consignee will beresponsible for electrical wiring, networking, or any other work connected to theinstallation area. the seller shall be only responsible for ensuring the setup of thedesktop systems, configuring, etc., as well as loading software etc. to be provided bythe buyer/consignee. any other site preparation required before installation andconnection of the desktop shall be the responsibility of the buyer/consignee. thebuyer/consignee, if required, will provide space at the installation site for the safestorage of tools, test equipment, and other materials used for installation at nocharge. in case there is a requirement of obtaining an entry pass for allowingrepresentatives to the premises, the same shall be arranged by the consignee.similarly, if there is a requirement of a gate pass for bringing items required forinstallation, the same is to be arranged by the consignee. in scenarios where multiplelocation installations are required, the buyer must indicate complete installationaddresses in the bid document. in the case of other modes of purchase, as soon asthe order is placed, complete details regarding installation may be informed to theseller. this ensures smooth coordination and delivery of products to the respectivelocations.7warrantythe buyer may ensure that as soon as supplies are received, a request for a warrantycertificate is made, along with logging into the oem website/call centre to verify thecertificate.8om related tomii, localcontent andmeity adviceon modeltechnicalspecifications buyers are requested to refer to various oms pertaining to dpiit and meity, as issuedfrom time to time, while making procurement and follow relevant provisions asapplicable.7 / 14 check pointsduringacceptance ofsupplies before generating the consignee receipt and acceptance certificate crac, theconsignee may inspect the system condition and verify that it complies with theagreed specifications and configurations. in the case of a large number of units to beprocured, then the buyer may opt for bidding and accordingly stipulate conditionsregarding installation, inspection by consignees/inspection agency. consignees whoreceive the supplies should be vigilant and should complete checking to ensure thatthere is no scope for the supply of refurbished products. at the time of receivingsupplies, the consignee may adhere to the following to ensure that any discrepanciesin supplies can be flagged, taken into account, and reflected while generating thecrac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon and checked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settings and canbe verified from the oem website. the above points are for guidance, and thebuyer/consignee may take steps considered suitable by them for checking atthe consignee end before acceptance of systems.v. an escalation matrix for customer grievance redressal shall be insisted uponby the buyer from the seller at the time of delivery.10hdd/ssdstorageretentionbuyer may add their requirement of retention of securely store all hard disk driveshdds or solid-state drives ssds used in the desktop computer under atc clause.11higherconfigurationthe buyer may permit products delivered with advanced usb standards. for example, a usb type-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 1 for seller:1oem websitelink/part nofor productverification the oem shall share the oem website link with the buyer at the time of delivery. theoffered model details/configuration should be available on their website. a uniquedevice serial number shall also be provided at the time of supply, which is alsomentioned on the product. the buyer/consignee shall be able to verify the completeproduct details, including configuration, through the shared oem website link.2changing oraltering theconfigurationthe seller must refrain from changing or altering the configuration of the factory pre-loaded machine. the machine should be delivered to the consignee in its original, factory-approved configuration.3warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specified warranty terms.the warranty certificate should be verifiable through the oem website/customer carecentre.4compliance ofextendedproducer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration is mandatoryfor manufacturing entities. therefore, all oems shall hold valid epr registration, andthe registration number should be reflected in the catalog parameter. oems shallensure compliance with all responsibilities as per epr registration applicable fromtime to time.5mandatory /statutoryrequirementsas applicableoems shall have to ensure compliance with the mandatory/statutory requirements asper the government of india notifications issued from time to time for hardware andsoftware components, as applicable.6operatingsystem1. it shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems.2. seller shall ensure to have windows hardware compatibility certificate forwindow operating systems8 / 14 scope ofinstallation it shall be the responsibility of the seller to ensure that all systems are installed, andsatisfactory working is shown to the consignee or authorized representative of thebuyer. however, in the case of direct and l1 purchase, installation of computersystem by the seller/oem is mandatory.8categoryspecification1. the seller may list products with advanced usb standards. for example, a usbtype-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 12. the supply of the monitor shall be in accordance with the parameteravailability of monitor. the details mentioned under description of storeregarding the monitor are applicable only if the monitor is being supplied.special terms and conditions-version:2 effective from 31-01-2025 for category computer monitor1. the product in gem marketplace direct purchase & l1 purchase comes with a minimum standard on sitewarranty of one year. in case the seller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.: : v v \ \/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. buyer added bid specific atcbuyer added text based atc clauses1.material: procurement of desktop based programming hmi unit and monitor.please submit gem bid document duly stamped and signed .2.delivery schedule: as per bid document. however, rinl-vsp reserves the right to revise the delivery schedules, depending on vsp s production requirements and storage capacity, without any change in price, terms and conditions of po.3. rinl reserves the right to negotiate with the tenderers without prejudice to their quoted price.4. inspection: inspection at r.i.c. central stores department, r.i.n.l., visakhapatnam steel plant, visakhapatnam-530031, andhra pradeshtest certificate not applicable5.number of sources: 01 one :the intended number of source is one . however, the bid quantity may be split in two sources as per the mii and mse policy of buyer; subject to purchase preference to eligible mses and make-in-india suppliers; subject to matching l1 price by any of the tenderers from l2 onwards in the order of ranking. if none of the l2 tenderers onwards matches the l1 price, then full tendered quantity may be ordered on the l1 tenderer.6.purchase preference: purchase preference will be accorded to micro & small entrepreneurs mses/ssis and make in india class-1 local suppliers mii class-1 as per the prevailing orders / policy of govt. / rinl, subject to fulfillment of eligibility and submission of requisite / stipulated documents in support ofeligibility and subject to matching of l-1 lnip price. 7.conditions for availing benefit is detailed under cl.no. 8.0 of detailed terms and conditions of invitation to supply tender ref vsp s website: www.vizagsteel.com.9 / 14 .for the purpose of this bid, the order of preference public procurement policy ppp & make in india mii is as under:a local mses - till the total quantity on local mses equals or exceeds 50%.b aimses - till the total quantity on aimses including local mses equals or exceeds 25%.c mii class 1 local suppliers - till the total quantity on class 1 suppliers equals or exceeds 50% d others including mses/non mses/ mii/ non mii in the order of ranking9.price firmness: price shall be quoted in rs. per no. for supply on for vsp stores basis inclusive of material price, freight, transit insurance, taxes / gst, etc. and the price finalized shall remain firm till completion of supplies. gst shall be applicable on all penalties like liquidated damages, penalties for variation in material specification, risk purchase recovery, shortages, penalty for late lifting/ delivery, forfeiture of emd / pg bond/ security deposit etc if levied by the purchaser on the seller/supplier and shall be recovered along with gstapplicable thereon. the purchaser shall issue tax invoice in favour of the seller/supplier for such recoveries. 10.not-withstanding anything specified in this tender document, rinl at its sole discretion, unconditionally and without having to assign any reason, reserves to itself the right: to accept or reject the lowest priced tender or any other tender or all the tenders; to accept any tender in full or in part quantity; to reject the offers not conforming to the tender terms and to accord purchase preference to public sector undertakings wherever applicable as per government policy/ guidelines. to extend purchase preference to local & non-local ssis / mses micro and small enterprises, subjectto submission of documents as stipulated. 11.terms of payment: 100% payment of the value of each consignment shall be made against submission of bills along with vsp s acceptance garn goods acceptance / rejection note. payment shall be released on 60th day 21st day for local micro and small enterprises and 45th day for non-local mses, subject to submission of documents as stipulated for availing mse benefits from the date of acceptance of material at vsp i.e. garn date.payment shall be made by neft/rtgs mode or such other mode of electronic fund transfer offered by banks. tenderers must furnish the required bank account details to vsp in prescribed proforma so that the same can be updated in vsp s database. 12.emd and performance guarantee bond: not required 13.right to accept/reject offers:rinl/vsp does not pledge itself to accept the lowest priced offer or any other offer and reserves to itself the right of accepting the whole or any part of the tender/offer or portion of the quantity tendered and the tenderers bidders shall supply the same at the rate quoted.14.liquidated damages: shall be as per gem gtc clause no. 15. iii with following addition/modification: subject to a maximum of 10% of value of such consignments, excluding taxes. for levy of ld in case of late delivery, date of receipt of material by rinl-vsp stores along with necessary documents shall be considered as date of delivery, subject to acceptance of material by rinl-vsp after inspection. 15.establishment of credibility of non-enlisted/non-assessed vendors: if a tenderer who responds to this bid is presently not enlisted with rinl-vsp as an approved vendor, and/or those tenderers for whom vendor assessment is not done by gem for the category desktop based programming hmi unit and monitor, has to upload the following documents in the offer/bid in gem:notarized statutory manufacturing / service industry registration certificate, i.e., empartiiissuedbydic/nsicregistration certificate / udyog aadhar memorandum for the same/similar tendered itemsfor mses.ornotarized copy of certificate of registration of shops and establishments for a dea1er/agent/trader etc.or10 / 14 notarized copy of certificate of incorporation along with memorandum and articles of association of the private/public limited companies.ii notarized copy of proprietary/partnership deeds in case of proprietary/partnership firms.iii notarized copy of gst registration certificate and pan card copy in the name of company in case of limited companies or in the name of individuals in case of proprietary firms.iv self-attested financial worth and audited financial statements for the last three 3 years.v self-attested copies of purchase orders/contracts for the same or similar tendered item/s.vi self-certified iso certificate, if any.vendor assessment report has to be submitted by the bidders for whom vendor assessment is already done by gem for the category desktop based programming hmi unit and monitor16.bidder shall have minimum 20% domestic value addition class-i or class-ii local supplier as per orderno. p-45021/2/2017-pp be-ii dt. 04.06.2020 of dpiit, ministry of commerce, goi and shall submit declaration as per format at annexure-ii of this atc along with their techno-commercial bid. 17. documents to be uploaded: by the bidder/seller during bid participation in gem: this bid document, specification sheets, drawings, corrigendum if any, etc. duly signed and stamped by bidder on all pages, confirming acceptance. bidders must select the mse option to claim mse benefits while submitting the offer on gem itself and upload their udyam registration for same/

State Government

TRN :34895362 | 11 Aug, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for gem bids for fan capacitor,aluminium body,220v ac,50hz,ambeint tem compensated 85deg c , fan capacitor,aluminium body,220vac,50hz,ambeint tem compensated 85deg c , mnx 18 contactors with 3pole plus 1 no, 220v coil , mn2 thermaloverload relay , 6 to 10a with manual and auto reset,ambient tem. compensated upto 55 deg c , mn2 thermaloverload relay , 9 to 15a with manual and auto reset,ambient tem. compensated upto 55 deg c , mk1 thermaloverload relay, 6 to 10a, direct mounting on mk, contactors , mk1 thermaloverload relay, 9 to 14a, direct mounting on mk, contactors , 6a 3 pin plug top,220v ac,white colour , 16a 3 pin plug top,220v ac,white colour , 6a piano type switch 220v ac,white colour , 20a capton switch,220v ac ,white colour , 6a 5 pin socket,heavy duty 220v ac ,white colour , 6a modular socket, north west,white colour , 6a modular socket, crabtree,white colour , 6a modular switch,north west,white colour , 6a modular switch ,crabtree,white colour , 16a modular switch ,north west,white colour , 16a modular switch, crabtree,white colour , 6 by 16a modular socket, north west,white colour , 6 by 16a modular socket, crabtree,white colour , modular fan regulator, north west, 01 module,white colour , modular fan regulator, crabtree, 01 module,white colour , 03 module modular gi box with front and back plate, north west,white colour , 03 module modular gi box with front and back plate, crabtree,white colour , 08 module modular gi box with front and back plate, north west,white colour , 08 module modular gi box with front and back plate,crabtree,white colour , 12 module modular gi box with front and back plate,crabtree,white colour , 12 module modular gi box with front and back plate, north west,white colour , modular blank plate, north west,white colour , modular blank plate, crabtree,white colour , 16a kitkat fuse,220v bacalite fuse with plastic body,cartridge fuse type , non modular kitkat fuse 10a,piano type , electro power spray for contact cleaner , acetone,500ml glass bottle for rust cleanning , pvc casing capping 20mm x 32mm , pvc casing capping 25mm x 12mm white colour , gi saddle 32 mm , gi saddle 25 mm , gi anchor fastner 08mm x 70mm , gi anchor fastner 08mm x 50mm , gi anchor fastner 06mm x 70mm , 25mm dia single compression brass cable gland heavy duty , 28mm dia single compression brass cable gland heavy duty , 32mm dia single compression brass cable gland heavy duty , 35mm dia single compression brass cable gland heavy duty , 38mm dia single compression brass cable gland heavy duty , 45mm dia single compression brass cable gland heavy duty , 6a tini mcb 01 module , 16a sp mcb c curve,breaking capacity-10ka , 16a dp mcb c curve , 20a sp mcb c curve , 20a dp mcb c curve , 25a dp mcb c curve , 32a sp mcb c curve , 40a three pole mcb , 40a four pole mcb , 63a three pole mcb , 63a four pole mcb , 100a four pole mccb with compact size, wide range of snap fit internal and external accessories , 125a four pole mccb,compact size, wide range of snap fit internal and external accessories , 160a four pole mccb with compact size, wide range of snap fit internal and external accessories , 200a four pole mccb with compact size, wide range of snap fit internal and external accessories , three pole 63a insulated fork bar 57 modules , mcb cannel din rail , 02 meter each , mccb enclosure 100a to 160a , mccb enclosure 160a to 250a , tube light holder push type ,

Central Government/Public Sector

TRN :34867934 | 06 Aug, 2025

Tender Value : 54.88 Lacs

Dimapur - Nagaland

Tender for gem bids for bill, dsitc of 40kw pv solar plant at fire station building, dsitcof 10kw pv solar plant at power house building., supply, installation, testing and commissioning of acdb panel., netmetering arrangement and liaising charges with dept ofpower nagaland., supply of 3.5 x 185 sq.mm xlpeinsulated armoured, laying of one number xlpe armouredpower cable in open duct above 95 sq. mm and upto 185 sq.mm, laying of one number xlpe armoured power cable inopen duct upto 35 sq. mm, laying and fixing of one numberxlpe armoured power cable in cable tray above 95 sq. mmand upto 185 sq. mm, laying and fixing of one numberxlpe armoured power cable in cable tray upto 35 sq. mmclamped with 1mm thick shaddle., laying of one numberxlpe armoured power cable in the existing pipe as requiredabove 95 sq. mm and upto 185 sq. mm, supplying andlaying of 120 mm dia dwc hdpe pipe direct in ground., supplying and making end termination 3.5 x 185 sq.mm, supplying and making end termination 3.5 x 35 sq.mm, providing, laying and fixing of 100 mm dia gi pipe, sitc ofsmart rfid based electronic cable marker 220 mm dia, operation and aicmc 1st year after dlp, operation andaicmc 2nd year after dlp., operation and aicmc 3rd yearafter dlp, operation and aicmc 4th year after dlp, operation and aicmc 5th year after dlp

Related Searched Keywords : upt cable

List of upt-cable Tenders

Tender for procurement of 2 nos of cable vulcanising plants upto 95 sq.mm for use at area workshop yellandu

Get upt cable Tender Alert...

Related Searched Keywords : upt cable

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us