Filters

List of washer-plate Tenders

List of latest washer-plate Tenders in Indian Tenders. Click on any washer-plate Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for washer-plate Tenders.

All-Tenders (82)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49065176 | 27 May, 2025

Tender Value : 8.86 Lacs

Birsinghpur - Madhya Pradesh

Tender for procurement of complete drag link chain set of besta raw coal feeder for unit no. 1 and 2 of ph i at sgtps, mppgcl, birsinghpur , as per tender schedule , complete drag link chain set for bestaraw coal feeder bin no. 031.06.060.076.01 sap no. 4400019258 (a) chain link withtongue (58 nos. per set) en-8bs:970-080-m-40 (b) chain link withouttongue (58 nos. per set) en-8bs:970-080-m-40 c)chain link pin dia.- 25 mm (116 nos. per set) en-24bs:970 (d) split pin(116 nos. per set) spring steel (e) split bush (116 nos. per set) spring steel (f)h.t. bolt ( m12x35) 232 nos. (g)washer:-58 nos. (h)scrapper bar(29 nos. per set) plate m.s. (hardened) angle m.s. (hardened)

Central Government/Public Sector

TRN :49065980 | 15 May, 2025

Tender Value : 0

Pardi - Gujarat

Tender for auction sale of 98050114 m.s. melting scrap released such as tws locking slide with block, shaku coupler, brake rigging, spare parts , screw coupling, spring tension device , hook bolt , end shield of traction motor , gear case assembly of traction motor, bombarder, memu, bhel top, pares for metco traveser, gear, coupling, screw, poh of bg coaches, cotter chain of bcm machine, e-block, juncion box for point machine face plate for buffer plunger, anti roll bar bracket , centre pivot foundation box buffer &draw gear , motor coach rear cover, ctrb, rifng oiler , draft key, bmbc brake cyclinder,more taper shank,twist dril, tapper ring set, dorme cover , crane chain and hook ,submursible pistion rod, draw hook beam, draft yoke, anti-roll bar bracket, rail tong, bearing for anti-roll bar, bent coupling link, hanger for bogie bolster, screw coupling, draw bar, draw hook, anchor link with or without silent block, equalizing stay rod, guard rail bolt for bridge, laminated leaf spring, wire rope with or without aluminum crimping, traction lever housing, traction center housing, cylinder body, broken spring, z-bracket, mix release of material engine, lateral bump stop with or without rubber attachment, primary bump stop with or without rubber, face plate of buffer plunger of sorts and sizes with or without rivets, rubber attached sandwich assembly for emu, t-head bolt for channel, air spring assembly plates, motor coach rear cover, motor front cover, axle box front covers, spares of dismantled bearings such as collar, pieces of m.s. angles, broken and small spring pieces, brake pad with or without rubber, cotter pins, phonic wheel, jaw, jack sorts 12,18,25 ton, plates of various sorts and sizes, grease or oil with or without spares, silent block for bolted design with or without rubber or m.s. attachment, knuckle, pointer machines, fish plates, joggle plates, air spring assembly 180 kn with or without rubber attachment, spanners, tapes, bracket, m.s. scrap, nut-bolts, steel pattis with or without m.s., broken & damaged fitting channel sleeper bridge, knuckle pins, brake cylinder assembly broken and damaged, cartridge for bearings, gear small pieces with or without oil and grease, all parts are soiled and greased, heavy m.s. plates and brackets with perforations, spring-loaded buffer assemblies, railway-specific cast iron and steel structural components, axle and wheel-related components, dismantled wheelset parts, rusty and broken tension rods, traction links, coupling rods, worn-out threaded components, washers, clamps, support brackets, dismantled steel reinforcement structures, mechanical linkages, damaged traction gear components, corroded and bent track fittings, securing bolts, connecting links, guide rods, rail clips, fasteners, mechanical locking assemblies, dismantled coupling parts, and miscellaneous railway hardware inner clip, outer clip,t head bolt , guard rail bolt and washer , hook bolt . all material is unserviceable and beyond economical repair (ber), sold on an as is where is basis. loading by purchaser. custodian: dms/scrap/pardi.

State Government

TRN :49067774 | 21 May, 2025

Tender Value : 0

Bakreswar - West Bengal

Tender for procurement of different consumable items and spares for overhauling of unit-4, 1 and 2 under em-iph dept. at bktps. , silastic 732 rtv (300gm bottle) additional data: (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , jointing sheet,asbestos,2000x1500x3 mm # jointing sheet,non-metallic compressed asbestos fibre to withstand 550 degree c,150 ksc is code 2712/9.8 grade w/1,size-2000?1500? 3 mm additional data: brand-champion style 54 super, non-metallic, water gasket, make-champion seals(india) , jointing sheet caf style 59 oil gasket, additional data: additional data:non metalic compressed asbestos fiber withstand 550 degree c,150ksc,2000x1500x3mm,make-champion. , jointing sheet,asbestos,2000x1500x1 mm # jointing sheet non-metallic compressed asbestos fibre to withstand 550 degree c,150 ksc is code 2712/9.8 grade 0/1 size-2000?1500? 1 mm additional data: additional data: brand-champion style 59 oil non-metallic, make-champion seals(india) , thinner -234 for varnish additional data: additional data: 800 gm sealed container, make: dr. beck (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , acetone additional data: additional data: make- merck limited, 2.5 ltrs sealed container. (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , varnish bectol red additional data: additional data: 1 kg sealed container, make: dr. beck (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , paint remover,locktite,sf-790 for generator , varnish bectol grey additional data: 1 kg sealed container, make: dr. beck (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , paint synthetic enamel black additional data: make- asian paints / burger. , paint synthetic enamel smoke gray additional data: additional data: 1 ltr sealed container,make- asian paints / burger. (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , hardner,hy 840 for eco-ash wa drg.no.: hw5520073007 additional data: additional data: drg.no.hw5520073007, new cat no. hy 140, in 500gm sealed container. make - aradur / huntsman. , resin,cy 205 $for wound stator assy part no.01350801003122 additional data: additional data: part no.01350801003122,wound stator [in 1 kg sealed container.] make- araldite / huntsman. , diluent c,drg:5670269,item no:134 generator , ms plain washer, is: 2016, size- m16 additional data: actual requirement: mat.: g.i., thickness >= 2mm. , nipple?part?list.9139360100400039 additional data: [sample can be provided] , hose ? dia.430 mm length # hose ? dia.430 mm length with fittings grade ph8 design pr.345 bar,insulation resistance 15 megaohms for jacking of 210 mw bhel g enerator shaft , hose 3/8 dia. 430 mm length # with fittings grade ph8,design pr. 276 bar,insulation resistance 15 megaohms# for jacking of 210 mw bhel generator shaft , compressor cr42(3.0 tr) 3ph for split ac for ac plant ductable split ac,make: blue star additional data: alternate make: emerson climate technologies model cr42k6m-tfm-101dm of emerson copeland, 3ph, 380-420 v, r22 , teflon bar,size:50mm diax300mm long , nomex paper,size-1mx2mx0.3mm # additional data: actual required: thick-0.7 or 0.8 mm , temperature controller cum indicator # digital,range,-50 deg c to + 50 deg c,type,dtc,multistain additional data: actual requirement: make:sub-zero, model:sz-7556-p, 0-50 d cen, ip-65, i/p-3.2va max, probe-ntc. , digital temperature controller # size-96mm*96mm,cat code-tc-144 additional data: additional data: make:honeywell,model:t2798i2000,0-50 d cen , switch , water flow, wfs6000, honeywell for ac system stg 2 honeywell automation water flow switch ,wfs6000, honeywell ,150 psi ,15a 250v, fittings 1 additional data: additional data: honeywell wfs-6000, 250v ac, 10kgf/sq cm , fan blade, mat. frp, sweep 12 for eot / lift cabin fan , spring(return) fr master controller # # for fr 25/5toncra additional data: additional data: for 125/30ton eot crane , master controller type:cm5/sr/8 # speed-o-controls voltage: 415v current: 40a , fan,cabin,sweep 400mm,1 ph,50 hz,230 v # additional data: additional data: make :powervent / cinni/ polar / rallifan / remi / uniflow. motor: copper coil with rated capacitor , fan pedestal # additional data: additional data: industrial heavy duty pedestal type air circulators complete with 4 wings cast aluminium alloy impeller. sweep - 600 mm (24 inch) or 750 mm (30inch), 1 ph, 230 volts, 1440 rpm, 160 -250 watts, make : powervent, cinni, polar, rallifan, remi, caravan electricals. , contact block assembly,cba,240v # speed-o-controls additional data: additional data:for eot crane, make: speed-o-control , switch,hp & lp combine cut-out,kp-15 for ac plant , dye shaft of ac cooling tower, model-6kf for central air condition system shaft length - 735mm. both side 19mm thick plate with 35mm hole dia for bolting. shaft including all accessories viz. nut-bolts, w , compressor,model:kcg572hae-d512 5.0 tr # emerson climate technologies reciprocating,hermetically sealed,3phase,50hz,400v,lra-55,oil- 76mtn,refrigerant,r-22 additional data: equivalent model cr72kqm-tfm-233dm of emerson copeland, 3ph, 380-420 v, r22 , water pump seal:19mm rc $for ac plant control and accessories , water pump seal,16mm rc,chw,swas,st-ii for ac plant for chiller pump,wet swas system , bearing housing for pump model bsn80/100 for ac plant make-mather & platt additional data: make-mather & platt , stud bolt / i-bolt for pump,bsn 80/100 for ac plant pump model: bsn 80/100,make-mather & platt additional data: moc:-steel,make-mather platt. , sleeve for pump,model:bsn 80/100 for ac plant bktpp make-mather & platt additional data: make-mather & platt , lock out switch,mushroom head # lock out switch with key (02 no keys each),dia 22 mm additional data: cat. no. rcp2bs14, make- c&s , fuse,power,415v,63a # additional data: size=0, 63 a, csdfl00 , fuse,power,415v,32a # , power contactor lc1d80 additional data: coil voltage: 240v.80a, make-c&s , relay,thermal o/l,63-80a,3ua5800-2uz2 siemens , with spp additional data: actual required: 3ua5800-2uz1 (with ring type end connection) with mounting base, make- siemens , selector switch,2 position,rcb2-bd21 with carrier , power contactor 50a,tp,230vac # siemens with 1no+1nc cat.no.3rt2036-1a-l20-6la068k additional data: siemens(3tf)/l&t(mnx-50) , spp, phase failure relay, type: vsp-d1 minilec aux. supply voltage-415v ac additional data: actual req.: aux. supply voltage-230v ac , power contractor,85a,mnx-95 l&t with 2no+2nc contact coil-230vac,ac-3 duty , heater,u shape heater 2 kw 415v # additional data:detail description: heating element for fluidzing blower system, rating 415v ac, operating temp 90-120, type: incoloy sheathed (u-shaped),sheathed m.o.c- ss304, resistance alloy: nichrome (80% nickel + 20% chrome), length: 100mm, . requirement: 2kw: 18 nos. & 1.5kw: 18nos. , o/l relay 415v ac 3ua-5000-1c 1.6-2.5a # additional data: including mounting base , contactor main 415v ac lc1-f-115 115a additional data: coil: 230v ac , push button,dia: 22.5 mm,colour: red additional data: 230v ac , push button,dia: 22.5 mm,colour: green additional data: 230v ac

Government Departments

TRN :49067847 | 20 May, 2025

Tender Value : 31.52 Lacs

Jhansi - Uttar Pradesh

Tender for tender for construction work of tin shed outside bijauli badi mata temple - earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift:d.s.r code no-2.8.1 2 p/l in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8 (1 cement: 4 coarse sand (zone-iii) derived from natural sources:8 graded stone aggregate40 mm nominal sizederived from natural sources .d.s.r code no-4.1.8 3 m-150 brick work in 1:6cement & c. sand mortar in foundation & plinth including all labour material complete item. d.sr-6.1.2 4 12 mm cement plaster thick 1:4 cement and coarse sand fair side single and half brick wall including internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth. dsr no-13.4.1 5 providing and laying in position specified grade of reinforcement cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement of r.c.c 1:1.5:3 with cement coarse sand .column t beam slab as dsr no-5.2.2 6 m.s (tor steel or plain ) in plain work such as r.c.c or r.b work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item.dsr 5.22.6 7 cost of foundation bolt…………..complete item 8 s/f of granite stone on plateform wallincluding complete in all respect dsr 8.2.2.1 9 steelwork inbuilt up tubular(round,square or ractangular hollow tubes etc)trusses etc including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer includingweldingand bolted with with special shaped washers etc all complete.dsr-10.16.2 10 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin- charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(0.63 mm thick sheet) dsr 12.1.3 11 excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (under floor) as per si.no. 2.25 (a) 12 providing and laying kota stone (dsr no-11.26) 13 s/f of 1200 mm sweep ceiling fan made with double ball bearing…complete item (make khaitan, polar, bajaj etc.) 14 s/f of 1x22 watt ledtube light ..complete (sch. nos.. 1413) 15 finishing walls with two coat ofpremium acrylicemulsion smooth exterior paint of best quality supply of all materials,labour and t&p etc dsr no 13.48.1 16 finishing wall with two coat of acrylic smoothdistemper (ready mix) having voc content less than 50 gram/liter exterior paint of best quality including all materials, labours, t&p etc all complete.dsr 13.41.1 17 supply and fixing of sign board including painting and lettering as directed by engineer-in-charge.

Co-operative

TRN :49068300 | 16 May, 2025

Tender Value : 0

Badaun - Uttar Pradesh

Tender for supply of hardware , item , white lead shalimar / shakoora make , red lead dewaldi make , baroza local , fevi coal , restoline1/2 kgpack , m.seal super mahindra & mahindra make , graphitepowder 1/2 kg pack , mosil compound gm-50 , mosil compound gn-100 , carborandum universal make emery paste 400gm pack rough & fine , aralditerate per kg , brasso 100 gm pack , gasket shallic compound , holtite liquid jointing compound1/2kg pack , iron cementrate per kg , teflon tape champion make1/2 , teflon tape champion make3/4 , teflon tape champion make1 , manila rope3/4 , manila rope1 , woolan felt(namda )rate per kg 1/4 , woolan felt(namda )rate per kg 1/2 , teflon rod champion make rate per length of 01 ft 25mm , teflon rod champion make rate per length of 01 ft 32mm , teflon rod champion make rate per length of 01 ft 35mm , teflon rod champion make rate per length of 01 ft 40mm , teflon rod champion make rate per length of 01 ft 50mm , teflon rod champion make rate per length of 01 ft 60mm , borex powder for gm casting , tempered postash egg make , cotton wastsuper white , silicon for c.i. casting , carborandum universal make emery taperough& fine 1/2 , carborandum universal make emery taperough& fine 3/4 , carborandum universal make emery taperough& fine 2 , hindustan sealol make meachincal seal for kirlosker pump with spring complte , old dhotionly cotton , galvnised fencing barbed wire rate per kg , locktite 50 ml pack no 270 , locktite 50 ml pack no 641 , brass zig zag strip , compressed leather sheet , painting brush 1” , painting brush 2” , painting brush 3” , painting brush 4” , painting brush 6” , spring steel flate all sizes rate per kg , carborandum stone 1x2x6 , three pigion make crucible 20 no , three pigion make crucible 40 no , three pigion make crucible 60 no , three pigion make crucible 80 no , three pigion make crucible 100 no , three pigion make crucible 120 no , brass welding rod 1/8” & 1/16” , welding flux 1/2kg pack , hindustan ferrodo make break liner 3/8x6” , hindustan ferrodo make break liner 3/8x8” , hindustan ferrodo make break liner 1/2x6” , usha martin make steel wire rope hemp cor 6/19 wire with test certificate 3/4 , usha martin make steel wire rope hemp cor 6/19 wire with test certificate 5/8 , usha martin make steel wire rope hemp cor 6/19 wire with test certificate 1/2 , usha martin make steel wire rope hemp cor 6/19 wire with test certificate 3/8 , h.d. plumber block smr rate as per ppl less…… , jmc spl quality bearing sleeve rate as per ppl less , all sizes brass strip rate per kg , lead wire all sizes rate per kg , carborandum universal make emery clothrate as per ppl , carborandum universal makeemery paper rate as per ppl , carborandum universal makegrinding wheele rate as per ppl , carborandum universal makesarface grinding wheele rate as per ppl , techno make soloniod valve for air 1/4 , techno make soloniod valve for oil 1 , techno make soloniod valve for water3/4 , rotaxmake single drive soloniod valve for air 1/4 , rotaxmake doubledrive soloniod valve for air 1/4 , 4 way valve1/2 , recorder chart chl 1 , recorder chart chl 2/3 , flow recorder pen , black rubber sheet rate per kg , mykoda make rubber oil seal rater as per ppl less , jyoti/orient /hockey make rubber joint rater per kg 1/4 , jyoti/orient /hockey make rubber joint rater per kg 1/8 , jyoti/orient /hockey make rubber joint rater per kg 1/16 , jyoti/orient /hockey make rubber joint rater per kg 1/32 , dunlop/good year make flate belt all sizes rate as per ppl less , m.s. perforated sheetthick 3mmx12mm hole dia 8mm , copper plate for c.f. machine rater per kg , brass round bar all sizes rater per kg , s.s. roundbar all sizes rate pr kg , glass wool rater per kg , glass wool pad complete rate per pad , oxygen gas regulater single/double stage esab make , black welding glass , white welding glass , rubber cord 3mm , rubber cord 4mm , rubber cord 6mm , rubber cord 7mm , foundry brush 2x6” , araldite with hardner hy/gy-250 , araldite with hardner hy/gy-825 , araldite with hardner hy/gy-830 , araldite with hardner hy/gy-850 , diamond chain all sizesrate as per ppl , lass , bag markingbrushs , hylum sheetrate per kg , leader make boiler gauge glass sleev 3/4 , qinn make boiler gauge glass sleev 3/4 , boiler gauge glass 3/4 x22 , side glass dia215mm x 15mm thick suitable temp. up to 150.c , side glass dia 197 mm x 15mm thick suitable temp. up to 150.c , matallic oil seal size 22 x 35 x 5 , matallic oil seal size 90 x 120 x 15 , matallic oil seal size 80 x 100 x 10 , matallic oil seal size 120 x 150 x 13 , matallic oil seal size100 x 120 x 13 , matallic oil seal size 150 x 180 x 15 , matallic oil seal size 120 x 160 x 13 , matallic oil seal size 150 x 27 x 85 , blow down volve spring , brass ferrule for lubricator , unique make spare rubber tyrepx 60 , unique make spare rubber tyrepx 70 , unique make spare rubber tyrepx 80 , unique make spare rubber tyrepx 90 , unique make spare rubber tyrepx 110 , unique make spare rubber tyrepx 160 , unique make rubber tyrecoupling complt. px 60 , unique make rubber tyrecoupling complt. px 70 , unique make rubber tyrecoupling complt. px 80 , unique make rubber tyrecoupling complt. px 90 , unique make rubber tyrecoupling complt. px 110 , unique make rubber tyrecoupling complt. px 160 , brass lined rubber bush50x50x15 , brass lined rubber bush 30x30x15 , brass lined rubber bush 25x30x15 , brass lined rubber bush 16x29x31 , brass lined rubber bush 38x38x22 , good year/dunlop make flat belt6” width x 6 ply , good year/dunlop make flat belt6” width x 8 ply , good year/dunlop make flat belt2” width x 4 ply , good year/dunlop make flat belt2” width x6 ply , good year/dunlop make flat belt3” width x 4 ply , good year/dunlop make flat belt3” width x6 ply , good year/dunlop make flat belt3” width x12 ply , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 6” x 10mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 6¼” x 12mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 8” x 10mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 8¼” x 10mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 10” x 10mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 10” x 15mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 8 ¼” x 15mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 8” x 15mm , circlip lock outer 18 mm , circliplock outer 22 mm , circliplock outer 30 mm , circlip lock waser 43 mm , circlip lock waser 50 mm , cs forgedgear coupling gc.109uniqe make , cs forgedgear coupling gc.113uniqe make , brass lined rubber bush50x50x15 , brass lined rubber bush 30x30x15 , brass lined rubber bush 25x30x15 , brass lined rubber bush 38x38x22 , brass shim size 14” x 48” x 4 thou , brass shim size 14” x 48” x 5 thou , brass shim size 14” x 48” x 8 thou , brass shim size 14” x 48” x 10 thou , brass shim size 14” x 48” x 12 thou , brass shim size 14” x 48” x 15 thou , hylem sheet size 2 feet x 2 feet x 3/4 , hylem sheet size 360mmx420mmx12mm , lock washer all size rate as per ppl , toughing side glass 200mm x 12 mm , rubber oring 294x5 , rubber oring 270x5 , rubber oring 33x4.5 , rubber cord 8 mm , try square 8 , diamond dressor 8 , compass out of inside 6 , compass out of inside 8 , nylock nut 1/2 , nylock nut 7/8 , nylock nut 1 , csk bolt with nut 3/4x 6 , csk bolt with nut 3/4x 4 , welding holder 600 amp. , hand gloves , welding copper cable 600 amp. , linseed oil , ms stud with nut h/t 7/8x 3 , ms stud with nut h/t 1 x 3.1/2 , ss pipe line 2grade- is 304 , ss pipe line 5thickness 2 mm grade- is 304 , ms tee 3/4 , ms long nut double face size 1.1/4 , tarfelt (20 mtr roll) , u clamp size 5/8 , spring steel funner size 8 width x1.5 mm thic. , metalic oil seal 225x287x50 , cutting nozzale 1/16 , cutting nozzale 3/64 , boiler gauge glass size-3/4x34 , boiler gauge glass sleeve size- 3/4 , carbide tips 50x22x12 r.h. (widya make) , carbide tips 40x20x10 r.h. (widya make) , carbide tips 32x18x10 r.h. (widya make) , carbide tips 32x18x10 l.h. (widya make) , carbide tips 25x14x10 r.h. (widya make) , carbide tips 25x14x10 l.h. (widya make) , carbide tool tip v - shape size -40 x 22 x 12mm , carbide tool tip r.h. size -25 x 14 x 8mm , carbide tool tip l.h. size -25 x 14 x 8mm , matellic oil seal size-110x140x20 , rubber cone for gauge glass , power master tube expender 42.6 id x 45 mm od , silicon brazing rod , flat belt size 3 x 8 ply , continuity tester , canvas flat belt 8 x 8 ply x 12 mm thickness , canvas flat belt thickness 12 mm, width- 250 mm , isi marked providing fixing of cotton hose pipe 15 mtr long rain 63 mm dia and s.s. male and female couplingsize 63 mm x 15 mtr long , isi marked providing fixing of cotton hose pipe 30 mtr long rain 63 mm dia and s.s. male and female couplingsize 63 mm x 30 mtr long

Central Government/Public Sector

TRN :49068676 | 28 May, 2025

Tender Value : 20.00 Lacs

Bikaner - Rajasthan

Tender for tender for welcome maintenance to officers md accommodation at af station nal; 1 demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified and directed. 2 material and labour brick work with sub class -b bricks old size, straight or curved on plan exc 6m mean radiusbuilt in cm 1:6. complete all as specified & directed. 3 all as per serial item no. 2.00 (here in before) but as in half brick thick walls built in cement mortar 1:4. 4 taking down chawkhat or frame with shutter (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. 5 taking down chawkhat or frame with shutter (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed. 6 taking down door shutter of any description exc 1.00 sqm but n. exc. 2.00 sqm each complete all as specified and directed. 7 taking down wooden shutters of any description exc 1 sqm but n.exc 2 sqm each from chowkhat and re-fixing in same opening after re-securing or easening and adjusting including repair of hinge as required complete all as specified and directed. 8 s&f solid pvc door frame of size 50mm x 47mm made out 5mm both side prelam pvc sheet used instead of plain colour pvc sheet & edges will be painted to match with prelam sheet re-inforced with ms square tube complete all as specified and directed. 9 m&l for factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of ms tubes 40mm x 20 mm for top and bottom rails ms frame shall be covered with heat moulded prelam pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour pvc sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail both side prelam pvc sheet used instead of plain colour pvc sheet. stile and rails feathered at edges paneling of prelam solid pvc sheets 10mm thick to be filted in msframe 40 x 20 mm welded, sealed to the stiles and rails with suitable pvc sheet beading, and jointed together with the solvent cement complete all as specified and directed. 10 s&f 1.25 mm thick pressed steel frames of size 125mm x 60mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with pcc 1:3:6 type c-0 using 12.5 mm graded stone aggregate complete all as specified and directed. 11 s&f 1.25 mm thick pressed steel frames of size 105mm x 60mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with pcc 1:3:6 type c-0 using 12.5 mm graded stone aggregate complete all as specified and directed. 12 s&f 35 mm thick 2nd class hard wood factory made plain framed, pannelled shutter (any number of panels) with panel of timber flat on both sides (feather edged) or of 12mm thick bwp commercial plywood with commercial face veneers, supplied and fitted complete all as specified and directed. 13 supply and fixing glazed and gauged skeleton factory made shutters35mm thick, 2nd class hard wood hollockopen rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cutand mitred beads for securing glass etcincl priming coat. the size of member of shutters as spfd in ssr part-1 section 8 clause 8.20 (b) incl kiln seasoned and chemically pressure treated, complete all as specified & directed. 14 s&f30mm factory made thick flush shutters, solid core construction,with particle board coreand plywood face panels,commercial type on both face is covered with decorative face veneer with lipping/frame to match sides includeforthe provision of suitable blocks for taking mortice locks, latches, or other fittings complete all as specified and directed. 15 s&f butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, 100mm size, isi marked, complete all as specified & directed. 16 supply and fixing200mm size aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. 17 supply and fixing 150mm sizeextruded aluminium alloy handles, fabricated type, anodised aluminium handles, complete all as specified and directed. 18 supply and fixing 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. 19 supply& fixingas in repairfloor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed to door shutters,complete all as specified and directed. 20 supply and fixing galvanised stainless steel wire cloth 0.45mm nominal dia of wire and width of aperture 1.40mm and fixed with tinned tacks or galvanised wire stapples/ screws in metal surrounds as required fixedcomplete all as specified and directed. 21 all as per description of serial item no. 20 here in before but as in repair 22 hacking out old broken glass of any thickness/size of any description from wooden frames/metal frame glazed with putty or fixed with beads all as specified. 23 supply and fixing 3mm thick sheet glass, ordinaly quality and glazing with oil putty or secured with spring clips in metal surrounds as required in square n exc 0.5 sqm in each pane , complete all as specified and directed. 24 all as per description of serial item 23 here in before but figured glass, pin head type. 25 s&f as in repairs door closer hydraulically regulated cast iron body, designation no 2, universal type, suitable for door shutters of size 701 to 850 mm in width and of weight between 36 to 60 kg,complete all as specified and directed. 26 s&f as in repair mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller pleat complete all as specified and directed. 27 s&f in repair stainless steel (grade 305) curtain rods 25mm dia 0.80mm wall thickness mild steel chromium plated incl supporting brackets complete all as specified and directed. 28 s&f in repair stainless steel (grade 305) ornamental type brackets (open ends) suitable for curtain rods of 25mm dia all as specified and directed. 29 s&f in repair stainless steel (grade 305) brackets (dead ends) suitable for curtain rods of 25mm dia all as specified and directed. 30 demolition of cement concrete in any positionand removing the rubbish outside mod land complete all as specified anddirected. 31 m&l for pcc (1:3:6) type c-2, using 40mm graded stone aggregate as in plinth protection 75mm thick laid in bays including all necessary form work, finishing exposed edges fair and providing 10 mm wide joints throughout the thickness of plinth protections duly filled with matic filling(one part of hot bitumen 85/25 and three parts of sand)and surfaces finished even & smooth without using extra cement complete all as specified . 32 m&l 25mm thick pcc 1:2:4 type b-0(using 12.5mm graded stone aggregate)as in sub base of floor surface finished even rough to receive floor topping complete all as specified and directed. 33 dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed. 34 m&l for granite (of any type)slab 18-20 mm thick machine cut ,bedded and jointed with gray cement slurry and pointed with white cement as in floors/ cooking plateform, with admixiture of pigment to match the shade of granite stone including grindingand polishing complete over and including20 mm thick screed bed in cm 1:6 complete all as specified . 35 m&l for granite (of any type)slab 18-20 mm thick machine cut , jointed with gray cement slurry and pointed with white cement as in vertical surfaces / dado / skirtingwith admixiture of pigment to match the shade of granite stone indluding grindingand polishing complete over and including10 mm thick backing coat in cm 1:4 complete all as specified . 36 m& l green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, including grinding and polishing providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete complete complete all as specified and directed. 37 dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. note:-the demolished material should be disposed off out side the mod land. the contractor shall quote his rates considering the above element 38 material and labour for glazed ceramic coloured tiles 7 to 8mm thick (square/rectangular )in vertical surface area of each tile exceeding 0.13 sqm but not exceeding 0.18 sqm thick set & jointed in neat gray cement slurry and pointed with coloured cement to match,the sahde of tiles laid over and including 10mm thick rendering in cm 1:4 complete all as specified and directed. 39 material and labour non-skid, ceramic coloured tiles 7 to 8mm thick (square/rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,as in floors, set and jointed ingray cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 as specified and directed. 40 material and labour non-skid, ceramic, coloured tiles 7 to 8mm thick (square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,as in floors, set and jointed ingray cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 as specified and directed. 41 material and labour non-skid, ceramic, coloured tiles 7 to 8mm thick (square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, set and jointed ingray cement slurry and pointed in white or coloured cement to matchthe shade of tiles laid over and including 10mm thick backing coat on fair faces of brick work or concrete surface in cm (1:4) complete all as specified and directed. 42 m&l for vitrified light shade ceramictiles9 to 10 mm thick polished,area of each tile exc 0.18 sqm andn exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cm 1:6 complete all as directed by engr-in-charge. 43 all as per ser item no.42 (here in before) but as in skirting laid over and including 10mm cement backing in cm 1:4. 44 material and labour for repairing of soffits of slabs/chajja, facia and similar works by dismantling of loose/ disintegrated portion of rcc upto 7.5 mtr heightand in any sitution, including provn of support,formwork and welding of reinforcement and fixing in position and with provision of weld mesh, applying dubbing 1st coat of 20 to 25mm thick in cm 1:3 finished rough and finishing coat of 10mm thick in cm (1:3) finished even and smooth without using extra cementover and including cement slurry @ 3 kg/sqm, finished even and smooth to desired shapeand applyingtwo coats of weather proof exterior emulsion paint over a coat of arylic resistant primer to match with existing surfaces complete all as specified and directed.(weld mesh measured and paid sepatrtely)note:-(i) unit rate of this item includes the cost of scaffolding, formwork etc. and nothing extra shall be paid on account of variation in height.(ii) for payment purpose, the area of finished plaster in 2nd coat shall be considered. 45 material and labour for hard drawn steel wire fabric (weld mesh) of weight not less than 3 kg/ sqm and not exc 4 kg/ sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt including necessary fixing arrangements etc complete all as specified and directed. 46 taking down cementplaster of any description on brick wall surfaces etc including raking out joints hacking for key , scrubbing down down with water etc complete all as specified and directed. note:- the demolished materials should be disposed off at a site as described by the eng-in-charge. the contractor shall quote his rates considering the above element. 47 m&l for rendering 10 mm thick on ceiling (brick or concrete surfaces)in cement mortar 1:4 and surface finished even and smooth without using extra cement complete all as specified and directed. 48 m&l for rendering 15mm thick on brick or concrete surfaces in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed. 49 m&l forrendering 15mm thick on brick or concrete surfaces other than fair face of brick work in cement mortar 1:4, finishing surfaces even and smooth without using extra cement complete all as specified and directed. 50 m&l for applying three coats of white wash on newly plasteredsurfaces of ceiling including preparation of surfaces complete all as specifed and directed. 51 m&l for preparation of newly plastered or unplastered surfaces of walls and applying two coats of exterior acrylic emulsion in any pattern (approved by ge), paint over and including a coat of exterior primer complete all as specified and directed. 52 m&l for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted over and including a coat of primer complete all as specified and directed. 53 material & labour for prepapration of new or previously untreated surfaces of wood or wood based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over & including a coat of pink primer comlplete all as specified and directed. 54 material & labour for prepapration of new or previously untreated steel or iron surfaces of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over & including a coat of red oxide primer comlplete all as specified and directed. 55 material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified. 56 material and labour for preparation of plastered or unplastered old decorated surfaces of ceiling etc. incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified. 57 material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of oil bound distemper complete all as specified & directed. 58 material and labour for comple removal ofold decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying two coats of oil bound distemper complete all as specified & directed. 59 m&l for complete removal of existing treatment on walls and applying two coat ofoil bound distempe paint interior gradeover & including a coat of alkali resistant priming paint over 7 including two layer of birla wall putty (min thickness 3mm) incl filling in craks etc to achieve a uniformsmooth finish incl preparationof surfaces complete all as specified & directed . 60 material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of plastic emulsion complete all as specified & directed. 61 m&l for preparation of old painted surface of wood and wood based materials of any description not otherwise described over 10 cm. width or girthshallapplying one coat of synthetic enamel painting overthe wooden surfaces all as specified & directed. 62 m&l for preparation of old painted surfaces of steel and iron work of any description exc 10 cm width or girth applying one coat of synthetic enamel paint on steel surface all as specified. 63 taking up or down 15 mm bore steel tubing & connections including clearing for refixing or removal to store complete all as specified and directed. 64 all as perserial item 63 here in before but 20m bore tubes 65 supply and fixing15mm bore tubes “medium grade”, galvanized, with and including all fittings and fixed completetowalls and ceilings or laid in floors,complete all as specified and directed. 66 all as per serial item 65 here in before but 20m bore tubes 67 s&f as in repair pillar taps long body fancy type quarter turn with capasten head chromium plated screwed down high pressure with without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. 68 supply and fixing as in repairs bib cock quarter turn cast copper alloy chromium plated, fancy type, long body screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 69 s & f as in repairs two way angle cock quarter turn cast copper alloy 15 mm bore chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioin fixed complete all as specified and directed. 70 s & f as in repairs angle cock quarter turn cast copper alloy 15 mm bore chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioin fixed complete all as specified and directed. 71 supply and fixing as in repair central hole basin mixer long swang nack, without poup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 72 supply and fixing as in repair central hole sink mixer long body swang nech for mixing hot & cold water, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 73 s&f as in repair brass cp wall mixer 3-in-1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe, connecting legs and wall flange for mixing hot and cold water screwed down for iron pipe 15 mm complete all as specified and directed. 74 s&f as in repair brass cp wall mixer 2-in-1 system with provision for over head shower complete with 115mm long bend pipe on upper side, connecting legs and wall flange for mixing hot and cold water screwed down for iron pipe 15 mm complete all as specified and directed. 75 supply & fixingas in repair chromium platedshower rose with or without swivel joints 125mm dia including fixing to steel pipe,complete all as specified and directed. 76 supply& fixing as in repair toiletpaper holder of brass chromium plated, complete all as specified and directed. 77 supply& fixing as in repairs pvc (ptmt) float valve,high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed suitable for 20mm bore pipe,complete all as specified and directed. 78 supply& fixing as in repairs pvc waste down pipeof 32/40 mm bore for basin, complete all as specified and as directed. 79 supply and fixing as in repairs 15mm dia pvc connection of length 450 mm, with ptmt nut, complete all as specified and directed. 80 supply and fixing as in repairs faucet health (hand jet) 15mm bore cast copper alloy, chromium plated with flexible chromium plated connection pipe 1.5 mtr length, with fittings, complete all as specified and directed. 81 supply& fixingas in repairs wash hand basin, vitreous china, white, decorative type, flat or angleback, size 580mm x 450mm inclusive ofwaste pipe and brass coupling and including cutting for and pinning in ends of brackets or erecting stand and inclusive of cost of brackets complete all as specified and directed. 82 s&f as in repair vitreous china pedastal pattern, wc incl connection to trap, and to flushing pipe anti-syphonage pipe, etc. complete all as specified and directed. 83 s&f in repair rimless single piece wc with uf soft close slim seat cover, hinges, fixing accessories set , incl cisternfittings, size 385x720x715mm complete all as specified directed by engr-in-charge. make: jaguar/cera/hindware 84 supply and fixing as in repair pvc valve less syphonic action type flushing cistern low level white with pvc in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including pvc connection and 32mm dia pvc long bend for squat pattern etc, set with concrete and making good to floor including taking down existing, fixed as in repairs complete all as specified & directed. 85 s&f as in repair ptmt seat cover white colour for padastal pattern,incl connection nut & bolts, etc. complete all as specified and directed. 86 s&f as in repair sinks with drain board made of stainless steel sink of 1mm thick sheet, kitchen or laboratory with plug washer and waste pipe incl bedding in cement mortar 1:6 on to draft wall of including fixing cantilever brackets and connecting unions overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed as in repairs complete all as specified. 87 supply& fixingas in repair pvc bath cabinet, size 622mm x 422mm, comprising of lookingglass, space for bath soaps, shampoo, tooth brush and paste, hand towel rail, complete all as specified and directed. 88 supply and fixing in repair stainless steel towel rack 600mm long with lower hangers incl 3 hooks complete all as specified and directed. 89 supply and fixing in repair brass chromium plated tubular towel rail 20mm dia d type 60 cm long between flanges complete all as specified and directed. 90 supply and fixing as in repair soap dish chromium plated of size 100 x 100 mm any type, fixed with chromium plated brass screwscomplete all as specified and directed. 91 s & f as in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws, complete all as specified and directed. 92 s&f as in repairs corner glass shelf with cp brackets (3 pcs set having size 8,10 & 12)complete all as specified and directed. 93 demolition and breaking up drain pipes 110/75 mm bore (salt glazed ware, ac or reinforced concrete) set in cement mortar complete all as specified and directed. 94 s&f 110mm dia pvc (swr) pipes single socketed in any length with rubber ring joints fixed to wall &laid in trenches or in floors,including clamps as required, complete all as specified and directed. 95 s&f 75mm dia pvc (swr) pipes single socketed in any length with rubber ring joints fixed to wall &laid in trenches or in floors,including clamps as required, complete all as specified and directed. 96 s&f in repair 75mm dia pvc (swr) floor trap plain with cp grating including jointing with solvant cement incl necessary pcc & form work as required complete all as specified and directed. 97 s&f 75mm dia pvc (swr) bends with rubber ring joints fixed as required with oval access door complete all as specified and directed. 98 s&f 110mm dia pvc (swr) bends with rubber ring joints fixed as required with oval access door complete all as specified and directed. 99 s & f 110mm bore pvcswr junction single (single t) with access door complete all as specified and directed 100 s&f in repairs stainless steel plate rack of size 78cmx91cmx25cm made out of 0.80 mm thick of stainless steel sheet , fixed in wall with rawl plugs and screws complete all as specified and directed. 101 dismantling boarding, any description any size , fixed in any position with screws complete all as specified . 102 m& l for 18 mm thick pvc board celuka ply of density 600kg/cum one side prelam/rigid laminated (colour/shade as approved by engr-in-charge) and other side plain white colour to make kitchen cabinet shutters /shelves/partitions and incl all required brackets ss screws etc, approved by engr-in-charge. 103 m& l for 18 mm thick pvc board celuka ply of density 600kg/cum both sidesplain white colour to make kitchen cabinet shutters/shelves/partitions and all required brackets ss screws etc, approved by engr-in-charge. 104 s&fin repair auto closes clip on cabinet hinges (regular) for kitchen cabinet shutters note : each pair means one piece fixed on openable shutter and other piece fixed on fixed portion. 105 s&fin repair stainless steel (ss 304) handles 100 mm size for kitchen cabinet shutters. 106 s&fin repair ball bearing drawer channel telescopic type (500mm) full extention load of load bearing capacity 45 kg.note : each pair means 2 nos of telescopic channel, one piece fixed on left side and another piece fixed on right side. 107 s&f rab door seal bottom brush duststopper with aluminium plate nylone brush of selected colour for fit each complete all as specified and directed. note : the sample of item shall be approved by ge before placing at site 108 supply and fixing powder coated aluminium (minimum thickness of powder coating 50micron) work for frames of doors, windows,ventilators and partitions (fixedportions) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, c.p. brass/ stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge note:-for payment purpose weight of aluminium section will only be measured 109 providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber/ neoprene gasket required (fittings such as hinges,handle,tower bolt,sliding boltshall be paid for separately) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, c.p. brass/ stainless steel screws,rollers & dust proof brush for sliding door / windowcomplete all as per architectural drawings and the directions of engineer-in-charge note:-for payment purpose weight of aluminium section will only be measured 110 s & f as aluminium grill of size, 85mm x 85mm hexagonal shaped mesh, fixed to aluminium frame work with u clip of size 15mmx12mm & fastners complete all as specified and directed. 111 s & f4.80 mm thick sheet glass ofordinary quality plain / tintedand glazing with rubber beads, clips etc complete all as specified and directed. 112 s & f 3 mm thickhigh quality, durable acrylic panel sheet and glazing with rubber beads, clips etc complete all as specified and directed. 113 s & f double action floor door spring hydraulically regulated made up minimum1.25 thick aluminium alloy sheet foundation box, main body stainless steel cover, with governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified 114 s&f conceled lock (push to unlock) for sliding window made with zinc body, aluminium hook and anti rust material with power coated metallic finish of approved colour having size100mm x 24 mm incl necessary cutting for fixing all as specified and directed.

Central Government/Public Sector

TRN :49068734 | 28 May, 2025

Tender Value : 40.00 Lacs

Bikaner - Rajasthan

Tender for tender for certain repair to buildings of wsa at af stn nal; 1 demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for allas specified and directed. 2 m&l for cement concrete type d2 (1:4:8) ( 40 mm graded crushed stone aggreagte) as filling and mass concretecomplete all as specified and directed. 3 m&l for laying 100mm thick cement concrete type b-1(1:2:4) ( 20 mm graded crushed stone agg)as in floor and paving surfaces all as specified and directed. 4 demolition of brick workor stone/boulders masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site all as specified and directed 5 m&l for brick work with sub class b bricks (old size) straight or curved on plan exc 6m mean radius built in cm (1:6) complete all as specified and directed by engr-in-charge. 6 taking down cement plaster of any description on brick/stone walll incl raking out joints hacking for keyscrubbing down water all as speicifed. 7 m&l for rendering 15 mm thickin cement plaster (1:6) on fair faces of brick/concrete surface, finishing even and smooth w/o using extra cement etc. 8 m&l for rendering 15mm thick in cement mortar (1:4) on brick or concrete wall surface finished even and smooth without using extra cement. 9 m&l for preparing newly plastered wall surfaces and applying two coats of weather proof exterior emulsion over and including one coat of primer complete all as specified and directed by engr-in-charge. 10 m&l for preparation of newly plastered surfaces of wallsand applying two coats of oil bound distemper over and including a coat of primer incl etc. complete all as specified and as directed. 11 m&l for preparation of old decorated surfaces of walls (plastered or un plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scrapping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of oil bound distemper complete all as specified and directed. 12 m&l for preparation of old painted surface ofwall surface and applying one coat ofweather proof exterior emulsion in camouflage pattern to match the existing pattern complete all as specified and diricted by engineer-in-chare. 13 rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified . 14 removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and directed by engr-in-charge. 15 forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed by engr-in-charge. 16 allas per item no-15 (here-in-before) but 1.5m to 3m height from base completeall as specified and directed by engineer-in-charge. 17 allas per item no-15 (here-in-before) but 3m to 4.5m height from base completeall as specified and directed by engineer-in-charge. 18 allas per item no-15 (here-in-before) but 4.5m and above height from base completeall as specified and directed by engineer-in-charge. 19 dismantling posts or struts in natural ground (wood, steel or r.c.c.) any section, including taking out embedded portion and making good disturbed groundcomplete all as specified and directed by engr -in-charge. 20 excavation in post holes(or similar holes) each in not exc. 0.50 cum getting out returning,filling in an ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil out of defence land and making good surface all as specified & directed. 21 m&l for pcc(1:3:6) type c2 (40mm graded crushed stone aggregate) filling in post holes, foundation,and other similar work complete all as specified and as directed. 22 s & f hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to fe 410-0 or fe 310-0 23 dismantling fencing wire mesh, any type etc, complete all as specified and as directed. 24 s&f in repair galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixingto any type of standard railsstraining bolts, including securing ortyping at crossingswith andprovision of galvasnised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured), complete all as specified and as directed. 25 fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire 26 supply only galvanised mild steel chain link fencing, size wire and mesh as approved complete all as specified and directed.note:- the payment for chain link fencing shall be made on the basis of weight of chain link fencing per square metre ascertained by a board of officer convened by ge, by getting minimum 3 samples of each lot . 27 m&l for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed by engr -in-charge. 28 dismantling timber scantlings 40 sq. cm and over in section, in any position in framed section etc., complete all as specified and as directed. 29 dismantling of wrought iron or mild steel work of any description not ohterwise provided for complete all as specified and directed. 30 m&l for ms work in roof trusses (framed), trussed, purlins, crane gantries, rails, posts and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.including special shaped washer etc. complete and including all necessary drilling or cutting holes in brick/ concrete surfaces and making good by pcc and cement plaster, welding work, bolting or reveting/fastening with fastner etc and similar work conforming to fe-290 gde e-165 complete and all as specified 31 s&f ms plain plates, square cut, with riveted, bolted or welded attachment fe-410-w (gde-e-250) quality a as specifed 32 s&f mild steel screw bolts (machine made) with hexabonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long, diameter of neck in 5 to 10mm. 33 dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets in roofcoverings including ridges complete all as specified & directed. 34 s & f pre- painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 35 dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering etc. 36 s & f 1mm thic plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters,(joints should be water tight) drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc. 37 supply and laid in repairs 110mm bore pvc (swr) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc. 38 s& f in repairs pvc (swr) bends for 110mm bore pipe etc. 39 taking up or down 15 mm dia steel tubing & connections or removal to store etc. 40 s & f 15mm bore of tube medium grade galvanized with and including all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. 41 dismantling water tanks any type of capacityexc 1000 but n.exc 2000 liters 42 dismantling water tanks any type of capacityexc 250 but not exc 500ltr 43 s&f 1000 liter capacity rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) tripple layered white, hoisted and fixed in position with and including 20 mm bore ball valves high pressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. 44 s&f 500 liter capacity rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) tripple layered white, hoisted and fixed in position with and including 20 mm bore ball valves high pressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. 45 s&f in repair 15mm bib taps quarter turn, cast copper alloy , with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc. 46 taking down door shutters of any description exc 2sqm complete all as specified. 47 taking down old wooden doors (single/double shutter ) of exc 4sqm n.exc 6sqm any position with complete accessories including chowkhat or frame all as specified and directed by eic. 48 taking down chowkhats or frames or ventilator not exc. 1.5 sq. m each etc. 49 s & f framed work as in doors, gates and ventilators of angle or other sectionfe-410 w (gde e-250) quality a with gusset plates, ms plain black sheet for door, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. 50 s & f expanded metal, weight not exc 4kg per sqm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members 51 s & f mild steel flat iron as in hold fast 400mm long embeded in pcc block with splitted ends and in braces in diagonal hand made sliding bolts, clamp hooks and similar worklike banks, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; largehasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to fe410-0 or fe 310-0 52 m & l for pcc (1:2:4)type b1 (20mm graded stone aggregate )asin lintels upto 1..5 m clear span, cills, hold fast for door, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing 53 s&f 35 mm thick 2nd class hardwood, plain, framed, factory made panelled shutters (any number of panels), in with panels of timber flat on both sides (feather edged), of 12 mm bwp commercial ply with commercial veneering on both faces; supplied and fitted to chowkats 54 material and labour for preparation of new wood surfaces of any description not other described over 10cm width or girth and applying twocoats of synthetic enamel paintover and including a coat of pink primer complete all as specified and directed. 55 supply and fixing in repair mild steel butt hinges medium weight, cold rolled, 100mm, isi marked, fixed with stainless steel screws complete all as specified and directed. 56 supply and fixing 150mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 57 supply and fixing 150 mm size extruded aluminium alloy handels fabricated type, anodised fixed with stainless steel screws complete all as specified and directed. 58 supply and fixing 300mm aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) fixing clips of sheet, cast or extruded setions and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed with stainless steel screws complete all as specified and directed. 59 m&l for providing post construction anti termite treatment to soil under existing floors using chemicalemulsion @ one litre per hole, 300 mm apart along the junction of floor and wall including drilling 12 mm dia holes and plugging with cement sand mortar (1:2) using pigment wherever required, to match the existing floor surfaces complete all as specified and directed.note :-any crack which is developed during execution of att in the floor shall be repaired to match the surface.the cost of this aspect shall deemed to be included in the rates quoted by the contractor 60 m&l for providing post construction anti termite treatment by specified firm along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre i.e. holes @300mm interval including drilling and plugging holes etc in apron/plinth protection and making good the surfaces to match complete all as specified and directed. 61 m&l for providing post construction anti termite treatment by specified firm to voids in masonry using chemical @ one litre per holes at 300 mm intervals by drilling holes at downward angle of 45 degree and replugging them with cement mortar 1:2 to match the existing surface complete all as specified and directed. 62 s&f in repair vitreous china wash down water closet pan pedestal pattern ( type white including pvc seat cover , connection to waste pipe and flushing pipe complete etc. 63 s & f in repair 10 ltr capacity pvc valveless syphonic action type flushing cistern low level white with inlet ball valve and brackets,float and handle, l-bend complete all as specified and directed 64 s&f in repairs vitreous china wash basin, white, flat back, size 580x450mm excluding taps waste, chain and plug and porcelain stopper but including bracket complete all as specified and directed 65 s & fvitreous china urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and union for discharge pipe.fixed in repairs complete all as specified and directed. 66 s & f urinal spreader of ptmt any colour for fixing with 15 mm dia pipe. (minimum weight 60gms) 67 s & f health faucet (abs body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and abs wall hook including making connections and fixed in position complete in all respect as specified. 68 s & f in repair long body stop valve 15mm bore(quarter turn) fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions. 69 s&f in repairs 15mm bore pvc connection pipe 450mm long with ptmt nuts at both ends etc.

Co-operative

TRN :49068823 | 16 May, 2025

Tender Value : 50.0 Thousand

Bareilly - Uttar Pradesh

Tender for supply of air compressor spare and services for season 2025-26 supply of air compressor spare and services for season 2025-26 , supply of air compressor spares and servicing , servicing & overhauling visit charge for colt make screw air compressure model cs-40fs (normal working- 08 hours) & supply of spares. (complete amc for season 2025-26) , servicing & overhauling visit charge for airvac blower capacity 1500 cubic meter per hour (normal working- 08 hours) & supply of spares. (complete amc for season 2025-26) , servicing & overhauling visit charge for airvac blower capacity 600 cubic meter per hour (normal working- 08 hours) & supply of spares. (complete amc for season 2025-26) , servicing & overhauling visit charge for airvac blower capacity 300 cubic meter per hour (normal working- 08 hours) & supply of spares. (complete amc for season 2025-26) , servicing & overhauling visit charge for usha make air compressor capacity 800 cubic meter per hour (normal working- 08 hours) & supply of spares. (complete amc for season 2025-26) , servicing & overhauling visit charge for air compressure (normal working- 08 hours) , trouble shooting visit charges forair compressure (normal working- 08 hours) , spare for i.r. make air compressor 7x5 - gasket set h.p , piston ring c.i , channel and springsuction , channel and springdischarge , discharge valve complete , plat inlet seat , plat discharge seat , plunger cober , oil scraper ring , seat plat , oil filter , air filter , air scraper ring , plunger v/l , lubricator complete , rubber o ring v/l , flat o ring , v/l spring , air scraper (set of 6 no) , oil scraper( set of 3 no) , spare for i.r. make air compressor model 9.5x7 -gaket set h.p side cover , piston ring , channel and spring suction , channel and springdischarge , plat seat suction , plat discharge seat , plunger cover v/l , plungher spring u/l , dowelein pin , gland box complete with bolt , main bearing , cr bearing , complete valve discharge , lubricator complete , oil seal for crank shaft , high tensile bolt , air scraper ring , oil scraper ring , unloader cup , oil pressur guage , oil pump , oil pump bush , cap screw d-11 , cap screw d-13 , star washer , air filter , oil filter , auxilari valve , air scraper (set of 6 no) , oil scraper (set of 3 no) , u/l flat o ring , u/l rubber o ring , h.t. bolt d-11,d-13,d-15 , head ht bolt d-28 , part plate inner for ir make air compressure 9 1/2 x 7 , u/l teflon o ring , u/l spring , u/l plunger cap , plate seat screw , spare for i.r. make air compressor model 234-type-30-tank n.r.v 1/2 , h.p.gasket set , valve strip set , set of piston ring , pressure switch , oil seal , pressure guage o-20 kg/cm2 , air filter , h.p. cylinder , valve seat sunction , valve seat discharge , head plat seat , connecting rod , piston for ir make compressure - 234 , k.g._khosla make air blower model-105-e-20 hp-5 si.no.21692- piston ring set , channel and springsuction , tune up kit set , oil seal , circlip , lock washer , suction and discharge valve , g.m. safty valve 1/2 , g.m. nrv 1/2 , h.p. gasket , connecting rod , screw , air filter with cap , discharge high pressure pipe , g.m. piston bush , elbow , nipple 3/4 , air filter , oil filter , pressure guage o-21 kg/cm2 , gasket set , valve strip , oil indicator , circlip & lock washer , oil seal (set of 5 nos) , chuck nut (set of 2 nos)

Central Government/Public Sector

TRN :49019174 | 13 May, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for auction sale of pl no: 98050126. condemned and unserviceable ferrous melting scrap consisting of axle boxes, axle box housings, side buffer plunger, buffer casing with/without spindle, knuckles and coupler yoke for cbc,end shield,control arm,connecting rod, bmbc components ,side bearer covers,gear wheel of sizes,blower covers,screw couplings and its link parts, bearing cover casings,grease collors,tensioning rods,anchor link with or without silent block, brake shoe with or with out brake blocks, draw hook, draw beam,draft key,iron pulley,protuctive tube, pipes of sorts and sizes,cam shafts and crank shafts of sorts and sizes with/without original attachments, fly wheels,center pivot male parts, spacers,sims,washers,rocker arms,bolts,nuts, studs, pins, brakets,brake shoe keys, metal rings, rods of sorts and sizes, cotter pins, small/broken coil springs, hanger blocks, iron balls of roller bearings and its inner and outer spacers, cbc couplers with or without rubber,huck bolts,huck bolt tails,linear rings,hhp pistons,traction rods,25kw rotor alternator,fan blade housings,buffer face plates,traction motor end shields, end locking screws,guide assemblies,bearing racers,side rubber bearer,knuckles, blower casings, locking plates, bearing adapters, dresser couplings ,shim plates, brake calipers,valves of sorts and sizes ,bearings of sorts and sizes , connection strips, brake cylinders, turbo casings, and other similar items melting in nature.note: 1] crane loading is permitted. 2] if any non ferrous items found to be removed.

corporations/Associations/Others

TRN :49020313 | 19 May, 2025

Tender Value : 0

Bareilly - Uttar Pradesh

Tender for outsource work - greasing per wheelgreasing per wheel including brake shoe lining fittingking pin work (per king pin)diesel tank opening, fastening and repairengine oil with oil filter changeengine head opening, fastening tataengine head opening, fastening leylandengine head tappet fitting tataengine head tappet fitting leylandengine replacement euro-2/3 tataengine replacement euro-2/3 leylandengine replacement euro-4piston ring job completeradiator assembly replacementviscous fan assembly replacement (complete work)inter cooler assembly replacementturbo charger replacementside plate packing change (complete work) tataa.c. unit replacementa.c. unit repaircooling plate packing change (complete work)timing plate replacement (complete work)timing cover oil seal replacement (complete work)rear main engine oil seal replacement (complete work)engine flywheel replacement (complete work)cam shaft replacement (complete work engine mounting pad replacement. front/rearengine assembly (tata/leyland) (dismantling and assembly).fire pump removalfire pump removalinjector removalinjector fittinginjector complete repair (euro-2/3)fi pump lever and bush replacement. (complete work)fi pump assembly (euro-2/3) (complete work)clutch plate/pressure plate changegear box replacement 1st.40gear box replacement 1st.60 clutch release bearing replacementclutch release bearing repair.clutch sleeve cylinder replacementclutch sleeve cylinder repairclutch master cylinder replacementclutch master cylinder repairclutch booster opening and installation bs04p.shaft opening and fastening per shaftrubber cushion changing tatarubber cushion changing leylandrubber cushion with center bearing changing tatarubber cushion with center bearing changing leylandsliding yoke replacementsliding yoke repairp.shaft bearing lock repair per shaft.replacing front seal of gear box.gear box assembling (tata)gear box assembling (leyland).gear box oil change (tata).gear box oil change (leyland).gear lever setting tatagear lever setting leylandclutch plate repair (tata).clutch plate repair (leyland).pressure plate repair (tata).pressure plate repair (leyland) front spring replacement per piecefront spring repair per piece.front chassis bracket replacement per piecefront brake drum replacementfront brake diaphragm assembly replacementdiaphragm washer replacementfront axle complete opening/fittingfront axle complete assembling.toy rod repair.push & pull rod repair.front stub axle opening/fittingfront haw opening/fittingrear spring replacement per piecerear spring repair per piecerear chassis bracket per piececrown cage roughly complete replacementcrown cage assembly complete repair rear axle complete disassemblyrear axle complete assembling.rear diaphragm assembly replacementrear brake drum replacementhub opening/fixingaccelerator cavity replacementsteering box awning replacedsteering rod & steering wheel replacementpower steering vane pump replacementpower steering vane pump repair.steering box overhaulair dire fittingair dire repair.dual valve repairprotection valve fittingdd unit repairdd unit replacementpressure tank replacementself starter replacementself starter repairalternator replacementalternator repaircomplete repair of wiringwiper machine fittingfog light fittingwind screen glass fitting per glass seat fitting per seatseat metal panel opening/fastening (per running feet)body structure channel straightening (per running feet)body structure angle straightening (per running feet)battery box iron fittingchassis straighteningpaneling complete bodyreplacing cushion and back rexine of one seatreplacing mazda rubberchassis u bolt tightening and fittingreplacing front glass door windowreplacing front bumper/ rear bumperreplacing front doorreplacing front doorreplacing front door grillrepairing front window screen frame replacing front wind screen framereplacing side window framerepairing rear portionfull body painting outsidepainting inside/outside by repair (running feet)painting front portion of bussoldering/tyingtube puncture repairdiameter change copychecking and correcting wheel alignment bs 6 replacing fusebs 6 changing vadri cut outbs 6 changing uds pumpbs 6 opening and installing daf nozzlebs 6 cleaning urea linebs 6 cleaning silencer (dpf)bs 6 replacing air filter primary safetybs 6 replacing urea filterbs 6 replacing steering filterbs 6 mixing tapidbs 6 replacing turbo chargerbs 6 opening wiring (common rail wiring)bs 6 opening wiring tying 2 (main wiring)bs 6 opening wiring tying 3 (wiring harness)bs 6 opening wiring tying 4 (gear wax wiring)bs 6 wiring opening & tying 5 (chassis wiring)bs 6 wiring opening & tying 6 (light wiring)front wheel overhaulingstore / loading unloading technical helper rate per day per worker (05 workers required)semi skilled labour rate per day per worker (04 workers required)skilled labour rate per day per worker

Related Searched Keywords : washer plate

List of washer-plate Tenders

Get washer plate Tender Alert...

Related Searched Keywords : washer plate

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us