Indian Tenders Tender information of India
Global Tenders International Tender information
Projects Project information of India
Tender Awarded Tender awarded information
Sub-Contractor Vendor information of India
Pay Online
Register now
Login
Contact Info All India : 9276083333 / 9274315555 South India : 9274315555

Filters

List of water-bed Tenders

List of latest water-bed Tenders in Indian Tenders. Click on any water-bed Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for water-bed Tenders.

All-Tenders (87)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49068978 | 20 May, 2025

Tender Value : 39.38 Lacs

Bikaner - Rajasthan

Tender for tender for repair and beautification work of the park near neelkanth mahadev temple in muralidhar vyas nagar, bikaner - 1 dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 2 surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr. and lift up to 1.5 mtr. : all kinds of soil 3 cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable materialby manualmeans with all lifts as per morth specification clause 201. lead upto 1000 mgirth above 2700 mm to 4500 mm 4 girth above 4500 mm 5 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils 6 carriage of earth sand line murom with all leads 7 providing and laying in position cement concrete including curing, compaction etc complete in specified grade excluding the cost of centering and shuttering- all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 8 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). 9 brick work with common burnt clay f.p.s.(non modular) bricks of class designation 100 infoundation and plinth withcement mortar 1 : 6 (1 cement : 6 coarse sand) 10 brick work with common burnt clay f.p.s.(non modular) bricks of class designation 100 in superstructure above plinth level upto floor five level in all shapes and sizes in : cement mortar 1: 6 (1 cement : 6 coarse sand) 11 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. 12 finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 13 providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 14 painting with synthetic enamel paint of approved brand and manufacture to give an even shade :two or more coats on new work 15 supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth 16 supply of dry manure including loading unloading,transportation & stacking at site. compost 17 preparation of soil including cleaning & removing of unwanted shrubs removal of stones & garbage. 18 digging of pits size 60x60x60 cms. including removal of stones manuring applicable of insecticides & watering atleast 15 litre per plant after plan ting. 19 suppling and laying of prepared& fully developed slection ist lawn rolls, including cost & tranporation of lawn rolls, preparation of bed also cost of all labours, manur water charges, removing of grass and stone from beds. maintance of lawn upto three monthsall work executed as per direction of engineer incharge. (approved by chief eng. kota) 20 supply of champa plant of ht 5 to 6 feet having age 1/2 to 3/4 year minimum fully developed including cost of growing of tree, cost of manure watering charge & maintances of tree to next six months with replacement of tree with new one if plants is dead complete as per direction of engineer in charges. (approved by chief eng. kota) 21 planting of trees /shrubs/ hedge and climbers plants at desired distance in row and watering 22 supply of different varieties of bougainvillea in ply bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. completedifferent varieties of bougainvillea 600mm to 900mm 23 supply of different varieties of rose plants in poly bag/ earthen pot according to height growth and age of the plant at site including loading unloading and transportation etc. completedifferent varieties of grafted rose plants in poly bag 1 to 1½ feet 24 supply of different varieties of palms in poly bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete arica palm many branches 5 to 6 feet 25 maintenace of plants by the contractor including of pits/bids watering preparation of thavala hoeing weeding etc. & application of insecticides etc. & security if the plant die during maintenance contractor has to replace same height plant at his own cost. 26 providing & fixing of pre cast coated concrete bench made of m-20 reinfor cement concrete having each bench consists of 2 no.s l-shape base support in white cement color (thickiness:-100 mm, back height: 1000 mm, front height :450 mm, base width: 620mm) and 2 nos. reinforced concrete planks in yellow & red color of size 1200 mm x 150mm x 50 mm, supreme designds smooth surface finish and durable structure.overall dimensions: seating length of the bench: 1200; seating heigh of the bench 450 mm total height of the bench 1000 mm

State Government

TRN :49069074 | 15 May, 2025

Tender Value : 3.68 Crore

Madhopur - Rajasthan

Tender for tender for major repair and modernization of existing emrs barnala (raj) - 1 earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 sqm on plan including disposal of excavated earth up to 50 mtr. and lift up to 1.5 mtr. disposed soil to be levelled and neatly dressed : all kinds of soil 2 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils 3 supplying and filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand 4 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 5 centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 6 providing and laying in position specified grade ofcement concrete forall rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement.m20 grade nominal mix / design mix providing m-25 grade concrete by usingcement as per codal provision instead ofm-20 grade design mix. 7 random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:nt mortar 1:6 ( 1-cement : 6-sand). 8 anti termite treatment of floor using imidacloprid 30.5% ec non repellent, odorless, low dose, environmentally safe terniticide with rapid action non corrosive stain free, by drilling 12mm diameter holes 300mm apart injecting the emulsion as per specification and plugging with cement mortar 1:2 ( 1 cement : 2 coarse sand) in the whole floor area dpe 12mm dia termitube system with required number of junction boxes are to be installed. the termitube will run all along the perimeter wall both inside and outside. in the middle area the termitube to be installed at an interval of 1.00 mtr. or less both ways as required with sufficient number of junction boxes to pump the emulsion. after successful testing of termitube, pesticide emulsion of imidacloprid 30.5% ec mixed with water in the ration of 1:474 will be pumped by a motorized spray pump from the junction box in specified manner. the plinth area of the area treated will be measured for payment. 9 centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. 10 centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 11 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mixproviding m-25 grade concrete by usingcement as per codal provision instead ofm-20 grade design mix. 12 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix 13 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to is:1786) thermo-mechanically treated bars (conforming of relevent is code) 14 brick work with f.p.s. bricks of class designation 75 in superstructure above plinth level upto floor v level in all shapes and sizes in : cement mortar 1 : 4 (1 cement : 4 coarse sand) 15 half brick masonry in superstructure , above plinth level upto floor vlevelusing bricks of designation 75cement mortar 1 : 4 (1 cement : 4 coarse sand) 16 carriage of materials:earth,sand ,line morrum,manure or sludge , lead up to 5km 17 filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 18 random rubble dry stone kharanja under floor. 19 p & f 1st quality heavy duty vitrified double charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grounting the joints with white cement and matching pigment etc complete. size600 mm x 600mm 20 rough chisel dressed sandstone 35 mm thick flooring of approved shade setover 20mm thick base of cement mortar 1:6 (1 cement : 6 coarse sand) and pointingwith cement sand mortar 1:3 with pigment to match the shade of stone with joint thickness up to 15 mm complete in all respects : red sand stone (karauli stone) 21 providing and fixing marble stone flooring table rubbed, 15-18 mm thick over 20mm (av.) thick base of cm 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. slabs bhaislana,abu,kishangarh zebra(black marble) above 3601 cm2 slabs 22 extra for providing edge moulding to 15-18mm thick marble/ granite/kota stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer-in-charge. granite/kota stone work full edge moulding 23 plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 20mm thick . 24 extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 25 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) 26 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 27 providing and fixing ist quality mat finished ceremic tile size 300x300mm confirming to is : 13753 coloured tile expect white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler power (untile or roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). 28 providing and fixing pressed steel door frames confirming to is 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applyinga coat of approved steel primer after pre-treatment of the surface including filling with cc 1:2:4(m15 grade) complete as directed by engineer-in-charge :profile c 29 providing and fixing external grade board solid core single leaf flush door shutters isi 2202-67 marked using phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure a: 35 mm thick commercial veneer both side 30 providing and fixing factory made p.v.c. door frame of size 50x47mm with a wall thickness of5mm, made out of extruded 5mm rigid pvc foam sheet mitred at corners and joined with 2 nos. of 150mm long brackets of 15x15mm m.s. square tube, the vertical door profiles to be reinforced with 19x19mm m.s. square tube of 19 gauge, epdm rubber gasket weather seal to be provided through out the frame. the door frame to be fixed to the wall using m.s. screws of 65/100mm size complete as per manufacturers specification and direction of engineer-in-charge. 31 providing and fixing to existing door frames. 30mm thick factory made solid panel pvc door shutter consisting of frame made out of m.s. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15 mm x15mm , top & bottom rails. m.s .frame shall have a coat of steel primers of approved make and manufacture m.s. frame covered with 5mm thick heat moulded pvc ‘c channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide pvc sheet out of which 75 mm shall be flat and 20mm shall be tapered in 45 degreeon the inner side to form top and bottom rail and 115mm wide pvc sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross pvc sheet shall be provided as gap insert for top rail & bottom rail. panelling of 5mm thick pvc sheet to be fitted in the m.s. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide pvc sheet bending on inner side, and joined together with solvent cement adhesive. an additional 5mm thick pvc strip of 20mm width is to be stuck on the interior side of the ‘c channel using pvc solvent adhesive etc. complete as per direction of engineer-in-charge, manufacture’s specification & drawing.(for w.c.and bathroom door shutter). 32 providing and fixing of upvc casement openable windows (outward / inward): outer frame made from the extruded upvc windows profile section of size 60w x 60h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and three chamber constuction, white in finish, duly reinforced with 1.5mm thick gi section. all the four corners shall be mitered cut & thermal welded so as to form window frame. frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. fix mullion made of 60w x 80h mm upvc profile section with steel reinforcement shall be provided in windows having 2 or more openable shutters, as per the requirement. frame shall have co-extruded with epdm/tpe-e gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter.the shutter of outward openable window shall be made of size 60w x 74h mm and shutter of inward openable window shall be made of size 60w x 77h mm extruded 3 box multi-chamber upvc window profile section of white colour having outer wall thickness of 2.25mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick gi section duly mitered cut & thermal welded at all corners and fitted with upvc glazing bead of size 36 x 20mm with inner and outer co-extruded epdm/tpe-e weather seal gasket alongwith 6mm thick isi make plain float glass. all welding joints of frame and shutter shall be cleaned and milled with the cnc mechainism to provide uniform grooved finish on all visible jaints. hardware: window shutter are fixed with frame on 2.5mmthick ss301 grade friction hinge system to keep the window opened at desired angle. friction hinge also enables easy cleaning of glass on both side from the inside of building. 33 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete new plastered surface (three or more coats) 34 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 35 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provisionnew work 36 painting with synthetic enamel paint of approved brand and manufacture togive an even shade :two or more coats on new work 37 french sprit polishing : two or more coats on new work including a coat of wood filler 38 providing and fixing stainless steel railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). grade 304 39 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 40 grading roof for water proofing treatment withwater proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 41 providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 42 providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 kg/sqm) on top of hot bitumen @ 1.7 kg/sqm. (1.40 kg ofvg-40 (30/40 )grade and 0.30 kg/sqm. ofvg-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of engineer-in-charge. 43 providing and fixing in position collapsible steel shutters with vertical m.s. channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of t-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (to be measured and paid as per outer dimension). 44 making grooves as per design in plaster 10mm to 20mm wide. 45 making khurras 450 x 450mm with average minimum thickness 50mmcement concrete 1 : 2:4 over p.v.c. sheet 1 mtr. x 1 mtr. x 40micron finished with 12mm cement plaster 1 : 3 and onecoat of neat cement, rounding edges and making and finishing the out let complete. 46 providing and laying damp-proof course with cement concrete grade m-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . 50mm thick. 47 filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick batscomplete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. 48 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (i) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @0.253 kg//sqm .this layer will be allowed to air cure for 4 hours. (ii) second layer of slurryof cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm this layer will be allowed to air cure for4 hours followed by water curing for 48 hours. the rates includes preparation of surface treatment & sealing of all joints ,corners,junction with polymer mixed slurry. 49 providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm 50 providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate z sections and other sections of approved make conforming to is :733 and is :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required pvc/neoprene felt etc. aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing /paneling , c.p. brass/ stainless steel screws al. tower bolt & al. handle & al. aldrop etc.,all complete as per architectural drawings and thedirections of engineer- in – charge .(glazing and paneling to be paid for separately). for fixed portionpolyester powder coating aluminum( minimum thickness of powder coating 50 micron) 51 providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board grade i, type ii conforming to is : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. pre-laminatedparticleboardwithdecorativelaminationononesideandbalancinglaminationonotherside. 52 providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basicitem.) with float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) 53 providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 54 providing and fixing sun control film, thickness of film 1 mil visible light transmittance 4-24% & solar energy transmittance 42-51% & total solar energy rejection 37-43%of approved colour and shade , complete in all respect , at all level , as directed by engineer- in -charge. 55 providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece m.s. 56 s&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. 57 p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor:size 530x410mm. 58 p & f european type white glazed vitreous china 1st quality double syphonic w.c (is :2556 mark) with p or s trap including cutting and making good the wall and floor 59 p & f 15 mm. dia connection pipe of approved quality/make :600 mm dia 60 p & f kitchen & lab. sink of approved make with c.i. brackets duly painted, 40 mm c.p. waste coupling, c.p. brass chain with rubber plug, 40 mm g.i. waste pipe up-to floor level complete including cutting and making good the wall & floor : fire clay glazed kitchen sink (i.s 771-1985marked) size 600 x 450 x 250mm. 61 p & f full-way valve (is:778 mark) or wheel valve of approved make : 62 gun-metal 15mm nominal bore. 63 gun-metal 25mm nominal bore. 64 p & f looking mirrors with p.v.c. frame of approved (atul modi guard saint gobin or equivalent)size 500 x 400 mm 65 p & f towel rail or ring of approved quality/ make: 66 c.p. brass towel rail with brackets 600x 20 mm 67 c.p. brass towel ring revolving type 68 p & f grating of approved quality /makestainless steel sheet size 125 mm diaheavy quality of approved make 69 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (is 15778 : 2007 code) having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work including cutting chases and making good the walls etc.,) 70 15mm dia nominal bore 71 25mm dia nominal bore 72 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (is 15778 : 2007 code) having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings, this included jointing of pipes & fittings with one step cpvc solvent cement , trenching refilling & testing of joints complete as per direction of engineer in charge.(external work). 73 15mm dia nominal bore 74 25mm dia nominal bore 75 p & f bib cock (is : 8931 mark), superior quality of approved make: c.p. brass bib cock, 15 mm nominal bore 76 p & f stop cock (is :8931 mark), superior quality & of approved make: c.p. brass 15 mm nominal bore. 77 p&f soap dish or tray of approved quality/ make. c.p. brass heavy and superior quality 78 p&f bath shower of approved quality/ make . c.p. brass of heavy & superior quality 150mm. 79 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. c.p. inlet connection 15 mm brass (is:8931 marked)with 60 cm long thread and nut. 80 p & f ball cock (is :1703 mark) with rod & p.v.c. ball complete : brass wt.400 gm,15mm. 81 p & f pvc storage tank (is : 12701marked indicating the bis license no), of approved make with cover, 25mm dia 1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. 82 hoisting charges for each floor : 83 construction of manhole in all type of soil inner size 90 x 60 cm. 300 mm thick masonry in cm 1:6, 10 cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in cm 1:6, finished with floating neat cement, 50mm thick m-15 grade c.c. flooring, making channels, 80mm thick stone slab covering with 40mm thick m-15 grade c.c. flooring, cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. depth up to 0.5 m 84 construction of chamber in all type of soil with 300 mm thick masonry in cm 1:6 m,10 cm thick c.c. 1:5:10 in foundation, 20mm thick insider plaster in cm 1:6, finished with floating neat cement, 50mm thick m-15 grade c.c. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. size 450 x 450mm depth upto0.5 m cement cover with frame 85 construction of septic tank in all types of soil with 40 cm .thick masonry in cm 1:6, 15 cm thick c.c bed of 1:5:10, m-15 gradec.c floor &rcc slab covering with m15 grade c.c. floor,50 mm thick stone slab partition walls, 20 mm thick plaster in cm 1:6 finished with neat floating cement, 4 nos stone foot rests of approved design ,two no. 450 mm dia each ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-size 400 x140x150 cm.(for 50 users)with 115 mm thick rcc (m-20) slab with tor steel reinforcement 10mm ? @15 cm c/c bothways including shuttering complete in all respect 86 construction of open surfacedrain with 112mm thick brick masonry in cm 1:4,110mm thick base concrete 1:5:10, 37mm thick m-15 grade c.c. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing: 150mm drain,225mm av. depth 87 p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 88 75mm dia 89 110mm dia 90 160mm dia 91 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 92 plain tee 110 mm 93 vent covel 75mm 94 plain floor trap 110mm dia 95 bend 87.5 - 75mm 96 bend 87.5 - 110mm 97 pipe clip- 110mm 98 coupler-110 mm dia 99 making connection of g.i. distribution branch with g.i. main including all fitting. beyond 25mm & upto 100mm dia 100 construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in cm 1:6, 80mm thick stone slab, jointing of slab in cm 1 : 3, ralthal, kharanja, 40 mm thick m-15 grade c.c flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: size 300 cm. dia outside & 300 cm. depth . 101 p & f water closet seat covers with brass hinges complete : solid pvc (is 2548 marked) grade-i black for ewc. 102 p & f low level flushing cistern of 10 litres capacity (is : 2556 mark) of approved make with complete fittings c.i. brackets duly painted, brass ball cock with ball (is: 1703 mark) complete including cutting and making good the wall: pvc withpvcbend and superior internal fittings as per is : 7231 . 103 p & f jet spray for water closet with c.p. copper tube flange of approved make. 104 p & f wvc wash basin (ist quality is:2556 mark) of approved make with c.i. brackets duly painted 1 no. 15 mm c.p. pillar cock (is:8934 mark) & 32 mm c.p. brass waste coupling of approved make, p.v.c waste pipe with pvc nut 32 mm complete including cutting & making good the wall : size 580 mm x 450 mm 105 p & f flush cock/flush valve (is:9758 mark) or wc of approved quality make : c.p. brass push type exposed 25 mm nominal bore. 106 brick work with f.p.s. bricks of class designation 75 in superstructure above plinth level upto floor v level in all shapes and sizes in :cement mortar 1 : 6 (1 cement : 6 coarse sand) 107 random rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in : 108 repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead with cement mortar 1 :4 ( 1 cement : 4 coarse sand) 109 patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. 110 labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 111 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. c.p. inlet connection 15mm.brass (is : 8931 marked) 112 p & f 15 mm. dia connection pipe of approved quality/make : cp brass pipe with cp brass nuts upto length 600mm. 113 providing & fixing premium quality white glazed vitreous china sanitary wares (is:2556 mark) of approved make as per direction of engineer-in-charge including cutting and making good the wall and floor. double syphonic european w.c. with mounted w.v.c. flushing cistern of 10 litre capacity complete with all necessary internal fittings with hydraulic seat cover. 114 p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: size 580x440mm. 115 providing and fixing t-iron frames for doors, windows and ventilators of mild steel tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 116 providing and fixing fully panelled/partly panelled/double leaf shutter frames for doors as per approved design and drawings with approved ordinary c.p./ oxidised steel fittings as per annexure - a and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete : 35 mm thick nigeria wood grade i 117 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth completeold plastered surface (two or more coats) 118 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:old work (one or more coats ) two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.old work (one or more coats ) 119 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provision old work 120 providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 kg/sqm) on top of hot bitumen @ 1.7 kg/sqm. (1.40 kg ofvg-40 (30/40 )grade and 0.30 kg/sqm. ofvg-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of engineer-in-charge. 121 supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 122 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirmingto is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 123 providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred weldedand grinded including hold fast of steel lugs 13mm x 3mm and 15 cm long embedded in c cblock 15 x 10 x 10 cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to framefor paitam fixing float glass 4mm thickpanes with glazing clips and metal sash putty andfixing of shutters frames peg stay, u shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of engineer-in –charge window openable. 124 providing and fixing concertina coil fencing with required dia 610 mm (having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal r.b.t. stud tied with gi staples and gi clips to retain horizontal including necessary bolts or gi barbed wire tied to angle iron all complete as per direction of engineer in charge with reinforced barbed tape (r.b.t.)/spring core(2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (cost of ms angle, cc block shall be paid extra) 125 renewing glass panes,with putty and nails wherever necessary float glass panes of thickness 4 mm 126 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 40mm nominal size). 127 kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm 128 earth work in excavation by mechanical means (hydraulic excavator ) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed : all kinds of soil

State Government

TRN :49033374 | 16 May, 2025

Tender Value : 0

Kashmir - Jammu And Kashmir

Tender for annual maintenance contract amc for civil/sanitary repairs to various assets of jktdc for the calendar year - providing/fixing of c.p. fittings of jaquar /cera / hindware or equivalent make including all leads lifts and carriages conmplete. 2 a.bib-cock/pillar cock/angle valve 15-mm dia 3 b. wall mixer/sink mixer/basin mixer 4 c. c.p. nipple 2/3/4/6 (1/2) 5 d. c.p.jet 6 f. health fucet 7 g.grating 8 h. p. v.c. connection(1/2) 12/18/24 9 i. c.p. coupling 10 j. bottle trap 11 k. c.p. showe with arm 12 l.glass shelf 13 m.soap case steel/glass 14 n. p.v.c corner shelf 15 o. pvc waste pipe 1/4,1/2 16 p. pvc siphon complete 17 q. pvcsiphon consolation complete 18 r. ¾’’+½’’ pvc siphon washels. 19 s. pvc flush handle 20 t. pvc seat cover plain/hydrolic 21 u. pvc seat cover consolation 22 v. pvc cistern 23 w. spandle (parko/ jaquar/cera). 24 x. gyzer bolt 25 y. connection washels 26 z. spandle washels 27 aa. mixer washels 28 bb.seat hinges normal 29 cc. seat hinges consolation 30 dd.pvc connection thread tape 31 ee.looking mirror with pvc frame 2-feet/ 2.5-feets 32 ff.mixer legpair 33 gg. towel rod 34 hh. towel ring 35 ii. paper holder 36 jj. angle value two in one 1.2 37 kk. water storage tank 38 ll. kitchen sink stainless steel 1.5-feet/2-feet 39 jj. brass ball cock 1/2,3/4/1-inch 40 providing/fixing of chinaware of standard quality includingcutting and making good the wall with all leads lifts and carriages complete. 41 a. english w.c/indian w.c 42 b. wash-basin 43 c. wash-basinpediatal 44 d. vanity wash basin of standard size 45 e. english w.c with cistern combined set (one piece set) 46 providing and fixing of pvc pipes of standard quality and fittings including all leads lifts and carriages complete. 47 a. 3/4 pvc pipes 48 b. 3/4 pvc plain bend 49 c. 3/4 pvc door bend 50 d. floor trap/master trap 3, 4 51 i. 12x12/ 18x18 hard plast pvc cover and frame 52 j. bottle trap 53 providing/fixing ofppr pipes and fittings ofapproved quality including all leads lifts and carriages complete. 54 a. 25-mm / 20-mm /32-mm dia ppr pipes 55 b. 25-mm/20-mm ppr fittings, elbow / socket / reducer/ tees/ 56 c. angle valve / gate valve of 25/20-mm dia 57 d. . 25 mm dia ppr plug 58 e.. 25 mm/20-mm adaptor (female) 59 f. 32 mm adaptor (female) 60 g. 25 mm 20-mm adaptor (male) 61 h.32 mm adaptor (male) 62 i.20 mm ball value 63 j.20 mm ,union 64 k. 25 mmunion 65 l. 32 mm ,union 66 m.40-mm ball valve 67 n.25 mm ball value 68 o.32 mm ball value 69 providing/fixing ofg.i piesfittings ofapproved quality including all leads lifts and carriages complete. 70 a. 15/20-mm dia g.i.pipe 71 b.25/40-mm dia g.i. pipe 72 c. g.i. fittings such as elbow/socket/tee/reducer (1, 1/2,3/4) 73 d. g. i. 15/20-mm ball valve /gate valve (25-mm/32-mm) 74 e. 1- hpmotor of standard quality 75 f.0.5- motor of standard quality 76 g.15mm dia20-mm dia - 25-mm dia union 77 h. 15 /20/25-mm dia(upto 600-mm nipple). 78 i. 15 mm cross over 79 j. 15 mm/ 25-mm tanki nipple. 80 k. 20 mm dia upto 600 mmlongnipple. 81 l. 20 /15 mm plug. 82 providing & fixing of hardware fitting and fixtures of m.s/ aluminium approved make including all leads lifts complete. 83 a. 3/4/5 hinges 84 b. 4/6/8 handle 85 c. 8- l-drop 86 d. 10/12-l-drop 87 e. 4/6 tower bolt 88 f. hydrolic door closer 89 g.door stopper 90 h. 6/8 i-hooks 91 providing/laying of cement concrete works in followinh mixes. 92 a.1:4:8 mix (1-cement : 4-sand: 8 graded strone agg). 93 b.1:2:4 mix (1-cement :2-sand: 4 graded strone agg). 94 c.1:3:6 mix (1-cement : 3-sand: 6graded strone agg). 95 d.1:1.5:3 mix (1-cement : 1.5-sand: 3 graded strone agg). r.c.c work only. 96 p/laying of laminated ac3 parquet flooring 6- mm thick with foam in floor including cost of cornice/side beading including cost of nails, fevicol with foamt- profile etccomplete. 97 dismantling of wooden flooring including frames/rails posts etc including stacking of serviceable material and disposal of unserviceable material, both lead upto 50-mt. 98 providing & fixing of wooden flooring made up ist class deodar wood including fixed with nails & providing of other required accessories all complete.( 40-mm thick). 99 wood work in trusses purlins rafter of 1st class budloo wood/fir woodor equivalent incl. hoisting fixing with nails etc. 100 provioding/ fixingof door window shutters glazed/panelled 1st class kailincluding cost of nails etc complete of required thickness excluding panelling / glazing which will be paid seperately 101 providing/fixing of galvanised ms wire gauze of average width with wire of dia 0.63 mm for doors, windows wherever required including all carriages and cost of other materialsviz beading complete. 102 re-enforcement for rcc work including straightening cutting, bending, placing in position and binding all complete including all carriages of tmt bars (thermo-mechanically treated bars). 103 providing and fixing of panellingor panelling and glazing for panelled or glazedshutters for doors, windows 104 a. kail wood 105 b. 4-mm thick glass 106 providing wood work in frames of door, window, chowkhats and other frames wrought framed and fixed in position with hold fasts, lugs or with dash fasteners of required dia and length first class kail wood. 107 providing/fixing of weather boarding 20-mm thick of first class kail wood plank including cost of frame work if any for making even surface where ever required complete job. 108 providing and fixing ofwire gauzeshutters using galvanized m,s. wire gauze of average width for aperture 1.4-mm in both the directionswith wire of dia 0.63 mm for doors, windowswith isi marked m.spressed butt hinges bright finished ofrequired sizewith necessary screws as directed .using first class kail wood. including all carriages and cost of other materials complete. 109 supply & fixing of 12-mm thick foam complete including adhesive . 110 dismantling of cement concrete / r.c.c work including disposal of excavated material upto 1-km lead complete. 111 providing & fixing of all sorts of tile/marble/ granitework in 1:4-mix (1-cement 4:sand) over a bed of 20-mm thick cement mortar complete. 112 b. glazed/ceremic tiles 113 c. cement concrete tiles 114 e.. 20-mm thick marble work 115 f. 16-mm thick granite flooring work 116 engagement of skilled / semi skilled man power as under:- 117 a. massion 118 b. carpentor 119 c. plumber 120 d. welder 121 e.blacl smith 122 f.drain cleaner 123 g. sweeper 124 h.labour 125 i. . skilled labour 126 p/fixing of stainless steel alimarah. 127 stainless steel curtain rods including brackets, side balls, screws etc complete job. 128 p/fixing of 12 mm ply including frame work. 129 p/fixing of 10 mm ply including frame work. 130 p/fixing of 19 mm ply including frame work. 131 p/fixing of 8-mm ply including frame work. 132 p/fixing of nodic panelling including frame work. 133 p/fixing of 12 mm thick mdf including frame work.single side laminated (ssl). 134 p/fixing of 6 mm thick mdf including frame work. single side laminated (ssl). 135 p/fixing of 1’’ to 3’’ width cornices of approved material. 136 p/fixing of colour coated cgi sheet roofingof 0.50-mm thick including nails, washels, etc complete job. 137 providing/fixing of 3.5-mm to 5-mm ordinary glass sheets for window paines including cost of beading etc complete. 138 earth work excavationin trenchs/foundation footingsin all kinds of soil including disposal of surplus soil and re-filling of the soil as required at site. 139 constructionof cement concrete manholes including dismantling of existing defunct slab, walls, in cement mortar 1:4 (1 cement 4 coarse sand) rcc top slab/walls with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate) foundation concrete 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) side plaster 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand) finished with floating coat of neat cement. size of main hole upto 600 x 600x450 -mm , including top made of cast iron frames with cover. complete job including carriage of required materialsfrom source to site, including all leads , lifts and headloads etc. 140 providing and applying 12-mm/15-mm cement plaster interior / exterior in 1:4-mix complete. 141 providing/fixing of msholdfasts of required size. 142 repair to iron workby way ofnecessary correction including requisite material weilding etc complete job . 143 structural steel work in built of section including bending, wielding, cutting, and primer coat in trusses fencing etc complete job. 144 dismantling of wall tiles/granite/ plaster including disposal of excavated material upto lead as directed complete. 145 prividing/applying of following painting / priming / snowcem/ touch wood and polishing items. 146 a. primer red oxide on steel / wood work 147 b. synthetic enemal paint two or more coats 148 c. snowcem two or more coats 149 d.touch woodtwo or more coats 150 e.plastic emulsion two or more coats 151 f. ready mixed paint two or more coats 152 g.washable oil bound distemper two or more coata

State Government

TRN :49019580 | 14 May, 2025

Tender Value : 7.89 Lacs

Mohali - Punjab

Tender for tender for misc civil works in the campus; 1 supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. 2 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 3 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 4 providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - all work up to plinth level : 5 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from naturalsources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 6 centering and shuttering including strutting, propping etc. and removalof form for 7 foundations, footings, bases of columns, etc. for mass concrete 8 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 9 thermo-mechanically treated bars of grade fe-500d or more. 10 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: 11 cement mortar 1:6 (1 cement : 6 coarse sand) 12 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 13 600x600 mm 14 12 mm cement plaster of mix : 15 1:6 (1 cement: 6 fine sand) 16 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 17 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 18 old work (one or more coats) 19 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 20 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 21 one or more coats on old work 22 supplying and stacking at site. 23 good earth 24 taking out existing cc interlocking paver blocks from footpath/ centralverge, including removal of rubbish etc., disposal of unserviceablematerial to the dumping ground, for which payment shall be madeseparately and stacking of serviceable material within 50 metre leadas per direction of engineer-in-charge. 25 laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern overand including 50 mm thick compacted bed of coarse sand, filling thejoints with fine sand etc. all complete as per the direction of engineer in-charge. (old cc paver blocks shall be supplied by the departmentfree of cost).

Government Departments

TRN :49019871 | 21 May, 2025

Tender Value : 8.47 Lacs

Agra - Uttar Pradesh

Tender for tender for repair work of zone-1 ward no. 16 ratanpura nagla vida community hall. - cleaning of the site for warkable etc. all complete. (non scheduled) 2 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (dsr 2023 sh-4.1.10 ) 3 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in :cement mortar 1:4 (1 cement : 4 coarse sand) (dsr 2023 sh-6.4.1 ) 4 brick work 7 cm thick with common burnt clay f.p.s. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level. (dsr 2023 sh-6.8 ) 5 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,taircases and spiral stair cases above plinth level up to floor fiveevel, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(dsr 2023 sh-5.3 ) 6 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500d or more(dsr 2023 sh-5.22.6) 7 centering and shuttering including strutting, propping etc. and removal of form work for :columns, piers, abutments, pillars, posts and struts(dsr 2023 sh-4.3.3 ) 8 12 mm cement plaster of mix : 1:4(1 cement: 4 fine sand)(dsr 2023 sh-13.1.1 ) 9 structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(dsr 2023 sh-10.1 ) 10 providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.fire retardant plywood conforming to is: 5509(dsr 2023 sh-9.126.2 ) 11 providing and fixing isi marked is:1341 m.s. pressed butt hinges bright finished with necessary screws etc. complete :)75x47x1.70 mm (dsr 2023 sh-9.55.3 ) 12 providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side ofdhesive bonding quality conforming to is : 2046 type s including cost of adhesive of approved quality. 1.0 mm thick (dsr 2023 sh-9.127.2 ) 13 distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour new work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre (dsr 2023 sh-13.41.1 ) 14 painting steel work with deluxe multi surface paint to give an even shade. two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture(dsr 2023 sh-1021sub head : 13 finishing13.48.3 ) 15 providing & fixing white vitreous china water closet squatting pan (indian type) along with “s” or “p” trap including dismantling of old wc seat and “s” or “p” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of engineer-in charge. long pattern w.c pan of size 580x440 mm (dsr 2023 sh-14.80.1) 16 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require white vitreous china flat back wash basin size 450x 300 mm with single 15mm c.p. brass(dsr 2023 sh-17.7.7) 17 providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps (all in c.p. brass) with waste fitting as per is: 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required(dsr 2023 sh-17.5.1 ) 18 providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white p.v.c. automatic flushing cistern, with fittings, standard size g.i./ pvc flush pipe for back and front flush with standard spreader pipes with fittings, g.i clamps and c.p. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: single squatting plate with 5 litre p.v.c. automatic flushing cistern(dsr 2023 sh-17.6.1 ) 19 providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge :flamed finish granite stone slab jet black, cherry red, elite brown, cat eye or equivalent.(dsr 2023 sh-11.55.1 ) 20 providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to isi : 12701, colour of opaque white or as approved by engineer-in- charge. the rate includes making necessary holes for inlet, outlet & over flow pipes. the base support i/c fittings & fixtures for tank shall be paid separately 21 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer -in-charge100 mm nominal size dia 22 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer -in-charge150 mm nominal size dia 23 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one stepcpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall 15 mm nominal dia pipes 24 providing and fixing ptmt bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms 25 providing and fixing ptmt stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms) 26 mirror of superior make glass 60x45 cm 27 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tile 600x600 mm 28 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 29 supply and fixing of light fitting switch board. (none sheduled) 30 supply and fixing wiring of light point. (none sheduled) 31 s/l/j of 20mm dia pvc cunduct pipe etc. all complete. 32 supply & fixing of wiring sub main. 33 supply & fixing of plug point 15mm. 34 lettering & painting of wall etc. all complete. 35 supply & fixing of 27watt. cfl etc. all complete. 36 carriage of materials by manual labour including loading, unloading and stacking for lead less than 01-50 mtrm.207.34+30.42 every 50 additonal meter 37 stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 7.38.1 8mm thick (mirror polished and machine cut edge) 7.38.1.1 granite stone of any colour and shade 38 constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design :with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 39 kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick 40 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) 41 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.) 42 stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (to be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :8.14.1 red sand stone - exposed face fine dressed with rough backingt 43 marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :raj nagar plain 44 providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)(dsr 2023 sh-10.28 ) 45 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). (dsr 2023 s h) 46 supply & fixing granite stone work display board (size 2.50ft x 4.00ft) including painting, lettering etc. all complete. (none schedule) 47 sub total 48 add/deduction rs. for estimate figure amount match 49 grand total

State Government

TRN :49019937 | 22 May, 2025

Tender Value : 0

Bhopal - Madhya Pradesh

Tender for tender for building material and other open bhatta brick (8x4x4) cement (isi mark) 53 grade stone aggregate 40 mm stone aggregate 20 mm stone aggregate 6 mm dust narmada sand tested steel (isi mark) 6 mm tested steel (isi mark) 8 mm tested steel (isi mark) 10 mm tested steel (isi mark) 12 mm tested steel (isi mark) 16 mm copra bolder stone profile sheet 0.5 mm 1.20 mtr width 3 mtr length muram steel iron ms pipe 72x72mm steel iron ms pipe 40x40mm steel iron ms pipe 25x25mm steel iron ms pipe 50x25mm fertile soil fresh cow dung (kachha gobar) pakaa gobar wall ceramic tiles 12x18 floor vitrified tiles matt & glossy 24x24 floor & wall tiles vitrified matt & glossy 24x48 vitrified porch tiles rustic 16x16 green net heavy duty type-2 uv stabilized material, 75% shed per kg 180-200 poly bags poly bag 15x25 cm size, 75 (300gauge) micron ldpe sheet natural compound/black compound conforming size 10.25 m x 1.25 m. minimum 125 micron 500 guage, weight 3 kgs 10 % per bed paver block 60mm thick, c.c.paver block of m-35 grade, shape-cube/hexagon/dumble vermi compost lamination bag size 19x32 (inch) per bag, gsm approx weight capacity 25 kg with office name printing wall putti (brand-asian paints true care 40kg) white cement brand birla primer interior brand asian primer exterior brand asian steel primer brand asian wood primer brand asian oil paint (wood) brand asian oil paint (iron) brand asian emulsion interior brand asian emulsion exterior brand asian distemper brand asian tarpin oil brush 4 brush 5 vinyl printing board-vinyl 5mm forex with i ms pipe frame pasting and installation at nursery qr code stickers -medicinal plant, ret plants, ficus plants, water proof sticker of size 8x12 having plants details with qr code display board approx size 2x8 (feet) with iron frame, acp base and disigned printed on vinyl fixing at signed

State Government

TRN :49020396 | 14 May, 2025

Tender Value : 0

Belagavi - Karnataka

Tender for tender for rate contract supply of disposable items to bims belagavi - corrugated drain.,water - bed,visualis-100-irrigation-aspiration-tubing-set-reusable,vaccum-suction-set-non-toxic-pyrogen-free-sterilised-disposable-ce/iso-certified(yankur-suction-set),urine-container-30ml,urine-collection-bag-1.5ltr,umbilical-venous-catherter-no5,umbilical-venous-catherter-no4,umbilical-venous-catherter-no3.5,umbilical-artery-catheter-5f,twin-bore-nasal-canula-adult,tracheostomy-tubes-with-no8.5-cuff-protex-or-equivalent,tracheostomy-tubes-with-no7.5-cuff-protex-or-equivalent,tracheostomy-tubes-with-no7.0-cuff-protex-or-equivalent,tracheostomy-tubes-with-no6.0-cuff-protex-or-equivalent,tracheostomy-tubes-with-no5.0-cuff-protex-or-equivalent,tracheostomy-tubes-with-no.0-cuff-protex-or-equivalent,tracheostomy-tubes-silicon-uncuff-size(pead)5.0,tracheostomy-tubes-silicon-uncuff-size(pead)4.5,tracheostomy-tubes-silicon-uncuff-size(pead)4.0,tracheostomy-tubes-silicon-uncuff-size(pead)3.5,tracheostomy-tubes-silicon-uncuff-size(pead)3.0,tracheostomy-tubes-silicon-uncuff-size(pead)2.5,tracheostomy-tubes-kit-uncuff-size4.5,tracheostomy-tubes-kit-uncuff-size4,tracheostomy-tubes-kit-uncuff-size3.5,tracheostomy-tubes-kit-uncuff-size3,tracheostomy-tubes-kit-size4.5,tracheostomy-tubes-kit-size4,t - protector,thermal-paper(high-quality)for-use-with-edan-se-1200-ecg-machine(1x100)-packa4-size,suction-catheters-no8,suction-catheters-no6,suction-catheters-no16,suction-catheters-no14,suction-catheters-no12,suction-catheters-no10,stillets-fitting-for-sizes7-endotracheal-tube,stillets-fitting-for-sizes4-endotracheal-tube,stillets-fitting-for-sizes3-endotracheal-tube,stillets-fitting-for-sizes2.5--endotracheal-tube,stillets-fitting-for-sizes2-endotracheal-tube,sterile-disposable-infusion-set(iv-infusion-set),steri-drape-for-ent,stehtoscope-peadiatric,stehtoscope-adult,stainless-steel-hydro-cannula-no.24,spinal-needle-no27g,spinal-needle-no26g,spinal-needle-no25g,spinal-needle-no24g,spinal-needle-no23g,spinal-needle-no22g,spinal-needle-no20g,spinal-needle-no18g,spc-catheter-malecot-with-stillete-fr20,spc-catheter-malecot-with-stillete-fr18,spc-catheter-malecot-with-stillete-fr16,spc-catheter-malecot-with-stillete-fr14,spc-catheter-malecot-with-stillete-fr12,spc-catheter-malecot-with-stillete-fr10,spc-catheter.,sony-thermal-glossy-paper-rolls-for-ultra-sound-typev,skin-staplers-disposable-35w-regular-size,skin-grafting-blade(humby-knife-blade),simcoe-irrigating-aspirating-cannula-22g,simco-cannula-no.22,siliconized-endotracheal-tubes-size4.5-without-cuff,siliconized-endotracheal-tubes-size4.0-without-cuff,siliconized-endotracheal-tubes-size3.5-without-cuff,siliconized-endotracheal-tubes-size3.0-without-cuff,siliconized-endotracheal-tubes-size2.5-without-cuff,siliconized-endotracheal-tubes-size2.0-without-cuff,side-port-blade-,septal-buttons,scented-masks-inflatable-cuff5,scented-masks-inflatable-cuff4,scented-masks-inflatable-cuff3,scented-masks-inflatable-cuff2,sanitary-napkin(size-extra-large),ryles-tube-no8,ryles-tube-no6,ryles-tube-no5,ryles-tube-no18,ryles-tube-no17,ryles-tube-no16,ryles-tube-no14,ryles-tube-no12,ryles-tube-no10,ryles-tube-no.-20,rubber-toniquet-no.6,rubber-toniquet-no.4,romovac-drain16,romovac-drain14,romovac-drain12,red-rubber-torniquet-4inch,red-rubber-catheter-no8,red-rubber-catheter-no7,red-rubber-catheter-no12,red-rubber-catheter-no11,red-rubber-catheter-no10,rae-ivory-pvc-nsala-tubes-with-soft-seal-cuff6,radiography-dry-laser-films-14inchx17inch(shall-give-one-cr-film-printer-free-of-cost-which-should-be-compatible-with-existing-fuji-cr-reader),radiography-computer-radiography-film-8inchx10inch(shall-give-one-cr-film-printer-free-of-cost-whichshould-be-compatible-with-existing-fuji-cr-reader),proseal-laryngeal-mask-airway-reusable-no4,proseal-laryngeal-mask-airway-reusable-no3,pigtail-catheter-8,pigtail-catheter-20,pigtail-catheter-18,pigtail-catheter-12,photo-therapy-eye-pad/goggles,phaco-tubings,peripherally-insrted--central-catheter-picc,pelvic-binder-l-size,papsmear-kit-(cytobrush-with-spatulla),oxygen-mask(adult),oxygen-mask-paediatric,ot-mask-with-tie-knot,optivantage-high-pressure-syringe-200ml,nrb-mask,north-polar-preformed-ivory-pvc-nasal-tubes-cuff8,north-polar-preformed-ivory-pvc-nasal-tubes-cuff7,north-polar-preformed-ivory-pvc-nasal-tubes-cuff6.5,nasal-splints-(internal-nasal-splints),nasal-splints-(external-nasal-splints),nasal-canula-paediatrics,nasal-02cannula-,n95-mask,micro-drip-set,measured-volume-set(coomb-set),long-arm-splint-universal,laryngscope-paediatric-conventional-4blades-set,laryngscope-adult-conventional-4blades-set,laparoscopic-tubal-ligation-band,lacrimal-stent,keratome-blade-2.8mm,iv-extension-3way-10cm,iv-extension-100cm,iobon-(antimicrobial-incise-drape-60x45-cm),iobon-(antimicrobial-incise-drape-34x35-cm),intubating-styleptes-small,intubating-styleptes-medium,intubating-styleptes-large,intubating-lma-reusable-size5,intubating-lma-reusable-size4,intubating-lma-reusable-size3,intrajagular-catheter-no10,intra-oculr-lens(foldable)no9-injector-system-preferably-2.8mm,pigtail-catheter-14,intra-oculr-lens(foldable)no8-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no6-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no5-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no23-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no22-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no21-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no20-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no19-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no17-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no16-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no15-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no14-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no13-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no12-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no11-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no10-injector-system-preferably-2.8mm,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size21,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size20,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size19,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size18,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size17,intra-ocular-lens(pciol)no26-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no25-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no24-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no23-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no22-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no21-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no21.5-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no20-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no20.5-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no19-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no19.5-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no18-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no17-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no16-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(iris-claw)size-5.5x8mm-no24d,intra-ocular-lens(iris-claw)size-5.5x8mm-no23d,intra-ocular-lens(iris-claw)size-5.5x8mm-no22d,intra-ocular-lens(iris-claw)size-5.5x8mm-no16d,intra-ocular-lens(iris-claw)size-5.5x8mm-no21,intra-ocular-lens(iris-claw)size-5.5x8mm-no20,intra-ocular-lens(iris-claw)size-5.5x8mm-no19,intra-ocular-lens(iris-claw)size-5.5x8mm-no18,intra-ocular-lens(iris-claw)size-5.5x8mm-no17,intra-ocular-lens(aciol)no19.5-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no19-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no18-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no17-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no16-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no15-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no14-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no12-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no11-optic-diameter5.25mm-and-size-13mm,intersurgical-i-gel-no.-5.0,intersurgical-i-gel-no.-4.0,intersurgical-i-gel-no.-3.5,intersurgical-i-gel-no.-3.0,infant-feeding-tube-no9,infant-feeding-tube-no8,infant-feeding-tube-no7,infant-feeding-tube-no6,infant-feeding-tube-no5,infant-feeding-tube-no10,ijc-dialysis-catheters-dual-luman-with-ctheter-kit-curved-extension-and-laser-cut-side-slots-3.8mmx13.5,i-gel-supraglottic-airways(inter-surgical)-size2.5,i-gel-supraglottic-airways(inter-surgical)-size2,i-gel-supraglottic-airways(inter-surgical)-size1.5,i-gel-supraglottic-airways(inter-surgical)-size1,icds-bags,icd-tubes-trocer-no32,icd-tubes-trocer-no30,icd-tubes-trocer-no28,icd-tubes-trocer-no24,icd-tubes-trocer-no16,icd-tubes-trocer-no14,heparinised-syringes-(for-abg-analysis)(plastic-round-disposable-heparin-coated-abg-syringe,14g,-packet),hemolock-(weck)-clips-size-600,hemolock-(weck)-clips-size-400,hemolock-(weck)-clips-size-200,hb-strips-with-machine(should-give-one-machine-free-of-cost-for-each-500-strips),glucometer-strips-with-machine(should-give-one-machine-free-of-cost-for-each-1000-strips),folleys-catheters-no.22,folleys-catheters-no.20,folleys-catheters-no.18,folleys-catheters-no.16,folleys-catheters-no.14,folleys-catheters-no.12,folleys-catheters-no.10,folleys-catheters-no.08,folleys-catheters-no.06,folleys-catheter-three-way--22fr,folleys-catheter-three-way--20fr,folleys-catheter-silicone-two-way-18fr,folleys-catheter-silicone-two-way-16fr,folleys-catheter-silicone-two-way-14fr,extension-with-integrated-bi-way-50cm,extension-with-integrated-bi-way-25cm,extension-with-integrated-bi-way-10cm,examination-gloves(small-size),examination-gloves(medium-size),examination-gloves(large-size),examination-gloves(extra-small-size),endotracheal-tubes-size9.5with-cuff,endotracheal-tubes-size9.0without-cuff,endotracheal-tubes-size9.0with-cuff,endotracheal-tubes-size8.5without-cuff,endotracheal-tubes-size8.5with-cuff,endotracheal-tubes-size8.0without-cuff,endotracheal-tubes-size8.0with-cuff,endotracheal-tubes-size7.5without-cuff,endotracheal-tubes-size7.5with-cuff,endotracheal-tubes-size7.0without-cuff,endotracheal-tubes-size7.0with-cuff,endotracheal-tubes-size6.5without-cuff,endotracheal-tubes-size6.5with-cuff,endotracheal-tubes-size6.0without-cuff,endotracheal-tubes-size6.0with-cuff,endotracheal-tubes-size5.5without-cuff,endotracheal-tubes-size5.5with-cuff,endotracheal-tubes-size5.0without-cuff,endotracheal-tubes-size5.0with-cuff,endotracheal-tubes-size4.5without-cuff,endotracheal-tubes-size4.5with-cuff,endotracheal-tubes-size4.0without-cuff,endotracheal-tubes-size4.0with-cuff,endotracheal-tubes-size3.5without-cuff,endotracheal-tubes-size3.5with-cuff,endotracheal-tubes-size3.0without-cuff,endotracheal-tubes-size3.0with-cuff,endotracheal-tubes-size2.5without-cuff,endotracheal-tubes-size2.5with-cuff,endotracheal-tubes-size2.0without-cuff,endotracheal-tubes-size2.0with-cuff,elbow-gloves(small),elbow-gloves(medium),elbow-gloves(large),elastic-adhesive-bandage-10cmsx4/6mtr,ecg-rolls-106mm-4inch,ecg-paper-roll-size-3inch(80mm-x-20-mtrs),ecg-chest-leads-disposable,ear-foam-tips-small-size.,ear-foam-tips-big-size.,ear-foam-tips-for-paediatrics-packets,ear-foam-tips-for-adults-packets,dry-laser-films-14inchx17inch(shall-give-one-cr-film-printer-free-of-cost-which-should-be-compatible-with-existing-fuji-cr-reader),disposable-syringe-5ml-with-23g-needle,disposable-syringe-50ml-with-needle,disposable-syringe-2ml-with-23g-needle,disposable-syringe-20ml-with-needle.,disposable-syringe-1ml-26x1.5-g,disposable-syringe-10ml-with-needle,disposable-plastic-sheet,disposable-plastic-apron-material-hmhd/ldp-plastic-colour-medical-blue-length-52inch-56inch-(below-the-knee)-size-medium-blood-and-water-resistant-fits-men-and-women,disposable-ot-masks-three-layer-with-6.5inch-ear-loop-melt-blown-cloth-and-non-woven-material-colour-medical-blue-dimension-6.88-inchx-3.74inch-outside-layer-leak-proof-non-woven-abric(25gsm)middle-layer-high-density-filter-yer(25gsm)-melt-blown-fabric-bfe-more-and-equivalent-to95%inner-layer-direct-contact-skin-layer-non-woven-fabric-quad-fold-design-pleat-depth-design-5/8inch-size-universal-certification-ce-iso/astm-level1,disposable-ot-caps-25-gsm-medical-grade-polypropylene-spun-bond-non-woven-materials-with-ultrasonic-sealed-with-small-elastic-at-the-back,disposable-needle-no26g-half-inch,disposable-needle-no.-24g,disposable-needle-no.-20g,disposable-needle-no.-18g,disposable-microtone-blade-high-profile-set,disposable-mackintosh-sheet,disposable-iv-cannula-26g,disposable-iv-cannula-24g,disposable-iv-cannula-22g,disposable-iv-cannula-20g,disposable-iv-cannula-18g,disposable-iv-cannula-16g,disposable-insulin-syringe-1ml(0.25x6mm),disposable-hiv-protection-kit hiv-kits-discription.-(1) surgical-gown-1piece (2) face-mask-1piece (3) face-protector-1piece (4) head-cap-1piece (5) shoe-cover-1 piece (6) gloves-1 piece,disposable-gown,disposable-glove-7inch(pair)-disposable-sterile-isi-or-ce-marked-gloves,disposable-glove-7.5inch(pair)-disposable-sterile-isi-or-ce-marked-gloves,disposable-glove-6inch(pair)disposable-sterile-isi-or-ce-marked-gloves,disposable-glove-6.5inch(pair)disposable-sterile-isi-or-ce-marked-gloves,disposable-crescent-blades,disposable-bed-sheet-colour-medical-blue-disposable-breathable-chemical-free-skin-friendly-bacterial-and-viral-barrier-tear-and-puncture-resisitant-impervious-and-repellant-to-fluids-adhesive-strip-fitted-elastic-on-all-boundaries-sterilized-dimension-and-weight-width-160cm-length-180cm-weight-of-bedsheet-130gram-material-nonwoven-fabric-polycoated-gsm-of-non-woven-material(g/m2)-40-to-60certifications-and-reports-aami-protection-level-level-iv-certification--iso-13485-medisurge-or-equivalent,disposable-a-scopy-shaver-4.00mm,disposable-1.5inch-needle-length,-26-gauge-needle-thickness-and-2ml-syringe-with-thread-locking-system-(unilock),disafe-plus-,diaper(adult)m-l(30inch-to-50inch),diaper-newborn(2-5kg),dialyser-suitable-for-fresenius-dialyser-machine0.8(m2)inline-steam-sterilization-reusable,dialyser-suitable-for-fresenius-dialyser-machine(f6)1.3(m2)inline-steam-sterilization-reusable-,dermatome.,dcr-stents-(dacrocystorhinostomy),dark-goggle,cord-clamp,computer-radiography-film-8inchx10inch(shall-give-one-cr-film-printer-free-of-cost-whichshould-be-compatible-with-existing-fuji-cr-reader),collegen-sheet-dressing,chest-drain32,chest-drain30,chest-drain28,chest-drain24,central-venous-line7,central-venous-line6.5,central-venous-line6.0,central-venous-line5,central-venous-line4.5,central-venous-line4,central-venous-line3.5,blood_lancet.,central-venous-line3.0,central-line-triple-lumen-,central-line-double-lumen-,cannula-fixator-,caesarian-drape-sterilized-disposable-non-woven-material-disposable-breathable-chemical-free-skin-friendly-bacterial-and-viral-barrier-tear-and-puncture-resisitant-impervious-and-repellant-to-fluids-colour-medical-blue-43gsm-size-160cmx250cm-43gsm-8mms-100cmx80cm-absorbent-80gsm-10inch-hole-2inch-adhesives-with-butter-paper,bone-wax-2.5gms-each-pkt,-1-box-contains-12-pieces-per-box,blood-transfusion-set,blood-tubing-set,blood-bags-double-450-ml,blood-bags-double-350-ml,biway-cannula,biopsy-disposable-punches--3.5,biopsy-disposable-punches--3,biopsy-disposable-punches--2.5,biopsy-disposable-punches--2,b-p-blade-no11,b-p-blade-no.12,b-p-blade-no.-21,b-p-blade-no.-20-,b-p-blade-no.-15,avf-needle-17g,a-scopy-burr-4.mm,angiographic-syringe-ct-and-mr-connector-pipe-compatable,angiographic-syringe-connection-pipe-two-way/by-way,angiographic-syringe-connection-pipe-single-way,angiographic-disposable-syringe-ct-and-mri-4x12,angiographic-disposable--syringe-200ml,ambu-bag-set-autoclavable-paediatric,ambu-bag-set-autoclavable-neonatal,ambu-bag-set-autoclavable-adult,ambu-bag-reservior-750ml,ambu-bag-reservior-500ml,ambu-bag-reservior-250ml,ambu-bag-reservior-1000ml,ambu-bag-face-mask-size2,ambu-bag-face-mask-size1,ambu-bag-face-mask-size00,ambu-bag-face-mask-size0,airways-no-3,airways-no-2,airways-no-1,air-bed-,adhesive-abdomen-drape,abgel-(gel-foam),abdominal-drain-kit-size-32,abdominal-drain-kit-size-30,abdominal-drain-kit-size-28,abdominal-drain-kit-size-26,abdominal-drain-kit-size-24

Government Departments

TRN :49020962 | 21 May, 2025

Tender Value : 10.31 Lacs

Agra - Uttar Pradesh

Tender for tender for hariparvat zone, room no. 28, jageshwar nagar, from saurabh house to hubbalal temple, drain repair and road improvement work by interlocking tiles and cc on the side track. - demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge. 2 earth work in excavation by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by engineer-in-charge: all kinds of soil. 3 by machenical transport including loading, unloading and stacking of earth (upto 10 km) 4 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4 (1 cement: 4 coarse sand) 5 cement plaster in coarse sand : 12mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) 6 1:5:10 (1 cement: 5 coarse sand (zone-iii) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources) 7 providing and laying design mix cement concrete of m-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy m.s. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of engineerin-charge (item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). cement concrete manufactured in automatic batching plant (rmc plant) including transportation to site in transit mixer 8 extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). 53 mm to 22.4 mm size stone aggregate 9 supplying and stacking at site. red bajri 10 laying, spreading and compacting stone aggregate of specified sizes to wbm specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density. 11 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge. 80 mm thick c.c. paver block of m-35 grade with approved colour design and pattern 12 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 13 raising & re-fixing of manhole including all material labor t&p etc. all complete. 14 supply & fixing of r.c.c. manhole frame and cover including all complete. 15 r.c.c. precast slab 900mm x 450mm having thickness (150mm with 10mm dia) reinforcement double cage and having two lifting handles. 16 supply and fixing of r.c.c. slab as per direction of engineer-in-charge etc. all complete. 17 supply and fixing of black granite stone board and approved standard matter with brick work, plaster & paint etc. all complete. 18 sub total (a) 19 add / deduction for estimate figure amount match

State Government

TRN :49021044 | 12 May, 2025

Tender Value : 0

Khurd - Maharashtra

Tender for supply of materials for construction of pandhan road from donad (khurd) to bhavarkhed remaining pandan road- 1 supplying trap /granite /quartzite / gneiss stone metal of required size by bringing the boulders at the road side breaking them to required gradation including conveying the boulders and stacking the broken metal etc. complete. (prior approval of sample stack of broken metal by the ex. engineer is necessary, the date of approval will form par b. by breaking boulder (hand broken)ii. 80 mm metal spec. no.rd. 19,20,21 / page no. 197 to 201 2 supplying trap /granite /quartzite / gneiss stone metal of required size by bringing the boulders at the road side breaking them to required gradation including conveying the boulders and stacking the broken metal etc, complete. (prior approval of sample stack of broken metal by the ex engineer is necessary, the date of approval will form par b. by breaking boulder (hand broken)ii. 40 mm metal. spec.no. rd. spec. no.rd. 19,20,21 / page no. 197 to 201 3 supplying murum having pi < 6 at the road side, including conveying and stacking complete. (pwd csr 2022-2023 it no. 2.29b) p.n.25 4 supplying soft murum at the road side, including conveying and stacking complete. (pwd csr 2022-2023 it no. 2.29b) p.n.25 5 compacting the subgrade/gravel/over size metal (200mm loose) layers for all width with power roller having weight 8 to 10 mt. including necessary, labour, materials and artificial watering complete 6 compacting the sub grade/gravel/ size metal (100 mm loose) layers for all widths with power roller having weight 8 to 10 mt. including necessary, labour, materials and artificial watering complete 7 compacting the hard murum / kankar for all widths (200 mm. loose) with static roller including necessary artificial watering complete. spec. no. rd 38/ pge no. (csr it 2022-2023) 8 providing and fixing road junction / information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge m.s. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 nos. high strength g.i. bolts and nuts of size 10 mm dia, and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by engineer-in-charge etc. complete. mild steel board with engineering grade. pwd ssr 2022-23 it. no. 6.47 9 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada pwd ssr it. no 24.01 10 providing cast in situ / ready mix m10 grade cement concrete for head walls of cd work/ retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with scada with natural / vsi standard artificial sand, cement 4.05 bags/cumt). (pwd csr 2022-2023 it. no.11.28) 11 providing and laying cement concrete pipe of is 458:2003 np-2 class of 800mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (pwd csr 2022-2023 it. no.11.10)800 mm dia 12 450 mm dia

Government Departments

TRN :49021397 | 21 May, 2025

Tender Value : 8.28 Lacs

Agra - Uttar Pradesh

Tender for tender for hariparvat zone, room no. 28, from jageshwar nagar saurabh house to hubbalal temple, drain repair and road improvement work by interlocking tiles and cc on the side track. - excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. dsr code no. 2.25(b) page no. 94 2 1:5:10 (1 cement: 5 coarse sand (zone-iii) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources) dsr code no. 4.1.10 page no. 103 3 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4 (1 cement: 4 coarse sand) dsr code no. 6.1.1 page no. 127 4 cement plaster in fine sand :12mm cement plaster of mix : 1:4 (1 cement : 4 fine sand) dsr code no. 13.1.1 page no. 217 5 p/l gsb with graded stone ballast with stone grit size stone ballast with hand ramming watering including all material labor t&p etc.all complete (ns) 6 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in- charge 80 mm thick c.c. paver block of m-35 grade with approved colour design and pattern 7 supply & fixing graniteboard 2.5x4 size display board including painting, lettering etc. all complete. (none schedule) 8 sub total (a) 9 add/deduction rs. for estimate figure amount match 10 grand total

1
2
3
4
5
6
7
8
9

Related Searched Keywords : water bed

Get water bed Tender Alert...

Related Searched Keywords : water bed

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

Copyright ©2018 - Thetenders.com. Read Policies