Filters

List of water-main Tenders

List of latest water-main Tenders in Indian Tenders. Click on any water-main Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for water-main Tenders.

All-Tenders (502)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :49067914 | 21 May, 2025

Tender Value : 2.87 Lacs

Kolkata - West Bengal

Tender for tender for improvement of filter water supply by replacing 100 mm dia. 0.1. main at 371e, suren sarkar road and its surrounding areas ¡n ward no. 33.

corporations/Associations/Others

TRN :49067943 | 21 May, 2025

Tender Value : 3.58 Lacs

Kolkata - West Bengal

Tender for tender for development of filter water supply at 6b, b!7a1h12, 88 kavi sukanta sarani and their adjacent areas by replacing existing old and worn out 150 mm dia. filter water service mains and allied works in ward no. 35.

State Government

TRN :49067990 | 22 May, 2025

Tender Value : 21.18 Lacs

Devbhumi Dwarka - Gujarat

Tender for comprehensive operation, maintenance & repair of all the components nc-21 pipeline khambhaliya section for 6 months for panchdevda h.w. to ghee dam h.w. including proper supply of water as per demand, all civil structures, all electro mechanical items, operation & maintenance records, supply of skilled & unskilled manpower, vehicles, tools, materials etc. complete under the project.

Central Government/Public Sector

TRN :49068313 | 13 May, 2025

Tender Value : 27.15 Lacs

Vadodara - Gujarat

Tender for providing and laying of new water supply line from main gate to wtp plant at 06 bn ndrf, jarod, vadodara(gujarat).

State Government

TRN :49068569 | 20 May, 2025

Tender Value : 43.26 Lacs

Narela - Delhi

Tender for maintenance of boundary wall in dda vacant land under na-ii.sub-head: hiring of equipments, manpower and transport etc. for demolition programme in narelazone-hiring and running oftractor with trolleyor equivalent complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme carried out at site successfully 2 hiring and running oftractor with trolleyor equivalent complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme failed/could not be carried out due to any reason at site. 3 hiring and running of hydraulic excavator(3d)with operator and fuel complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme carried out at site successfully 4 hiring and running of hydraulic excavator(3d)with operator and fuel complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme failed/could not be carried out due to any reason at site. 5 hiring and running of pneumatic cutter/hammer with air compressor and operator complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme carried out at site successfully 6 hiring and running of pneumatic cutter/hammer with air compressor and operator complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme failed/could not be carried out due to any reason at site. 7 hiring and running of gas cutter/hammer with air compressor and operator complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme carried out at site successfully 8 hiring and running of gas cutter/hammer with air compressor and operator complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme failed/could not be carried out due to any reason at site. 9 hiring and running of crane with operator complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme carried out at site successfully 10 hiring and running of crane with operator complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme failed/could not be carried out due to any reason at site. 11 hiring of cameraman for photography & videography and making 3 nos. of compact disk & 20 nos. of photograph of demoloiton programme as per direction of engg. incharge. 12 providing and deploying of manpower in demolition programme in narela zone as per direction of engineer-in-charge.labour/coolie without hammer 13 providing and deploying of manpower in demolition programme in narela zone as per direction of engineer-in-charge.labour/coolie with hammer 14 hiring and running of mobilecrane with operator and fuelcomplete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme carried out at site successfully 15 hiring and running of mobilecrane with operator and fuelcomplete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme failed/could not be carried out due to any reason at site. 16 hiring and running of loader or equivalent complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme carried out at site successfully 17 hiring and running of loader or equivalent complete in all respect to dda and its deployment as per direction of engineer-in-charge for demolition programmes in narela zone.demolition programme failed/could not be carried out due to any reason at site. 18 c.f. @ 0.973 = 4326583.00 19 special conditions:1 that the agency shall supply, on demand, equipment for demolition programmes as well as manpower for carrying out demolitions, at the quoted/ awarded rates, which have been described in schedule of rates here to.3 the engineer-in-charge shall be the competent authority to take a decision for forfeiting the security deposit or any part thereof, because of non-compliance of any instructions/orders issued by him. 4 that the agency shall, simultaneously after signing of the agreement, submit a certificate along with agreement with equipment supplier if any to the engineer-in-charge that all demolitions items, equipments as well as manpower whenever required for the demolitions shall be kept readily available at shortest time gap and the contractor shall be informed about the demolition programme either through letter, telephonically, whatsapp, e-mail or by any other means.5 it is specifically agreed that in case of any failure/ non-compliance on the part of the agency, in respect of the supply of any equipments, manpower, the engineer-in-charge shall be entitled to arrange requisite demolition equipments, and manpower at the risk and cost of the agency. it is further specifically agreed that any loss or damages suffered by the authority because of any non-fulfilment of the agencies obligations under the agreement or violations of the terms and conditions of the agreement by the agencyshall be recovered from the agency. 6 that while making payments, the authority shall abide by all the fiscal legislation including deduction of tax at source as applicable, as per prevalent government orders. 7 that the agency shall carry the demolition items, equipments, instruments and manpower required for carrying out the same to the site of demolition at its own expenses. nothing extra shall be payable by the authority to the agency in this behalf. 8 that the labour/ manpower employed by the agency shall always be employees of the agency and under no circumstances the authority shall have to do anything with the labour/ manpower. any injury caused to the manpower, or damage to the demolitions items/ equipments/ instruments shall be the sole and exclusive responsibility of the agency9 that the agency is required to carry out an insurance of all its demolition items/equipments and instruments which shall cover the third party claim also. further the agency is required to get itself insurance protection in respect of any injury to the labour/manpower employed by the agency for the purpose of carrying out any requisite demolition. it is specifically agreed that any claim on the insurance company in respect of any damage to the demolition items/ equipments/ instruments or claim in respect of any injury to the labour employed, shall be borne by the agency exclusively and the authority shall have no concern with the same. the demolition equipments wherever required to be operated manually, shall be operated by persons employed by the agency and the authority shall have no concern in respect of the terms or incidents of employment of such persons. 10 recovery at double the agreement /accepted rate or market rate whichever is more per machinery/per day shall be made if agency fails to provide requisite machinery tools & manpower on the day of demolition programme. 20 12 in case any equipment or machinery becomes unserviceable, during the execution of demolition programme, the rates/ reduced rates be paid to the agency as per the recommendations of the engineer-in-charge. 13 executive engineer ensure that all the dismantled material received during the course of demolition at site will be the property of dda and same shall be kept in record & will be auctioned in open market to bear the cost of demolition.any recoverable or reusable material (e.g., doors, windows, steel, bricks) shall be listed, stored, and handed over to dda officials or disposed of as per written directions14 the contractor shall provide personnel safety equipment to all the manpower engaged on work. 15 all labours will be wearing reflective jackets of same colour. 16 agency will carry out photography & videography of all demolition carried out. in absence of videography & photography, no payment will be made to agency.17 agency may be asked to carryout up to three programmes in a day depending on job requirements as decided by engineer-in-charge. in case of failure to supply equipment and manpower etc., punitive action shall be taken under relevant terms and conditions described above.18 all demolition work must comply with local/state/national safety regulations (e.g., osha, is codes, etc.). the contractor shall be responsible for providing all personal protective equipment (ppe) to their workforce.19 adequate measures must be taken to control dust, noise, and vibrations. water spraying and sound barriers should be used where necessary.20 the contractor shall strictly adhere to all relevant guidelines, circulars, and standard operating procedures (sops) issued by the dda related to demolition works and environmental management21 the contractor must coordinate with relevant dda departments such as land management, engineering wing, and horticulture (if applicable) during the execution.22 after demolition, the site must be restored and leveled as per dda’s instructions. temporary structures, debris, and waste materials must be fully removed.23 the employer reserves the right to terminate the contract for unsatisfactory performance or violation of any terms.

State Government

TRN :49068596 | 13 May, 2025

Tender Value : 26.50 Lacs

Dwarka - Delhi

Tender for maintenance of various colonies under nazul a/c -ii, dwarka zone supplying of water through tankers for automatic misting system on road no. 224, near sector -6 and 7 red light dwarka.

State Government

TRN :49068664 | 14 May, 2025

Tender Value : 18.81 Lacs

Mumbai - Maharashtra

Tender for tender for annual comprehensive maintenance contract of window/split ac’s and water coolers installed at msebhcl’s offices, guest houses and vip staff quarters in mumbai area.

Central Government/Public Sector

TRN :49068676 | 28 May, 2025

Tender Value : 20.00 Lacs

Bikaner - Rajasthan

Tender for tender for welcome maintenance to officers md accommodation at af station nal; 1 demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified and directed. 2 material and labour brick work with sub class -b bricks old size, straight or curved on plan exc 6m mean radiusbuilt in cm 1:6. complete all as specified & directed. 3 all as per serial item no. 2.00 (here in before) but as in half brick thick walls built in cement mortar 1:4. 4 taking down chawkhat or frame with shutter (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. 5 taking down chawkhat or frame with shutter (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed. 6 taking down door shutter of any description exc 1.00 sqm but n. exc. 2.00 sqm each complete all as specified and directed. 7 taking down wooden shutters of any description exc 1 sqm but n.exc 2 sqm each from chowkhat and re-fixing in same opening after re-securing or easening and adjusting including repair of hinge as required complete all as specified and directed. 8 s&f solid pvc door frame of size 50mm x 47mm made out 5mm both side prelam pvc sheet used instead of plain colour pvc sheet & edges will be painted to match with prelam sheet re-inforced with ms square tube complete all as specified and directed. 9 m&l for factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of ms tubes 40mm x 20 mm for top and bottom rails ms frame shall be covered with heat moulded prelam pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour pvc sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail both side prelam pvc sheet used instead of plain colour pvc sheet. stile and rails feathered at edges paneling of prelam solid pvc sheets 10mm thick to be filted in msframe 40 x 20 mm welded, sealed to the stiles and rails with suitable pvc sheet beading, and jointed together with the solvent cement complete all as specified and directed. 10 s&f 1.25 mm thick pressed steel frames of size 125mm x 60mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with pcc 1:3:6 type c-0 using 12.5 mm graded stone aggregate complete all as specified and directed. 11 s&f 1.25 mm thick pressed steel frames of size 105mm x 60mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with pcc 1:3:6 type c-0 using 12.5 mm graded stone aggregate complete all as specified and directed. 12 s&f 35 mm thick 2nd class hard wood factory made plain framed, pannelled shutter (any number of panels) with panel of timber flat on both sides (feather edged) or of 12mm thick bwp commercial plywood with commercial face veneers, supplied and fitted complete all as specified and directed. 13 supply and fixing glazed and gauged skeleton factory made shutters35mm thick, 2nd class hard wood hollockopen rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cutand mitred beads for securing glass etcincl priming coat. the size of member of shutters as spfd in ssr part-1 section 8 clause 8.20 (b) incl kiln seasoned and chemically pressure treated, complete all as specified & directed. 14 s&f30mm factory made thick flush shutters, solid core construction,with particle board coreand plywood face panels,commercial type on both face is covered with decorative face veneer with lipping/frame to match sides includeforthe provision of suitable blocks for taking mortice locks, latches, or other fittings complete all as specified and directed. 15 s&f butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, 100mm size, isi marked, complete all as specified & directed. 16 supply and fixing200mm size aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. 17 supply and fixing 150mm sizeextruded aluminium alloy handles, fabricated type, anodised aluminium handles, complete all as specified and directed. 18 supply and fixing 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. 19 supply& fixingas in repairfloor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed to door shutters,complete all as specified and directed. 20 supply and fixing galvanised stainless steel wire cloth 0.45mm nominal dia of wire and width of aperture 1.40mm and fixed with tinned tacks or galvanised wire stapples/ screws in metal surrounds as required fixedcomplete all as specified and directed. 21 all as per description of serial item no. 20 here in before but as in repair 22 hacking out old broken glass of any thickness/size of any description from wooden frames/metal frame glazed with putty or fixed with beads all as specified. 23 supply and fixing 3mm thick sheet glass, ordinaly quality and glazing with oil putty or secured with spring clips in metal surrounds as required in square n exc 0.5 sqm in each pane , complete all as specified and directed. 24 all as per description of serial item 23 here in before but figured glass, pin head type. 25 s&f as in repairs door closer hydraulically regulated cast iron body, designation no 2, universal type, suitable for door shutters of size 701 to 850 mm in width and of weight between 36 to 60 kg,complete all as specified and directed. 26 s&f as in repair mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller pleat complete all as specified and directed. 27 s&f in repair stainless steel (grade 305) curtain rods 25mm dia 0.80mm wall thickness mild steel chromium plated incl supporting brackets complete all as specified and directed. 28 s&f in repair stainless steel (grade 305) ornamental type brackets (open ends) suitable for curtain rods of 25mm dia all as specified and directed. 29 s&f in repair stainless steel (grade 305) brackets (dead ends) suitable for curtain rods of 25mm dia all as specified and directed. 30 demolition of cement concrete in any positionand removing the rubbish outside mod land complete all as specified anddirected. 31 m&l for pcc (1:3:6) type c-2, using 40mm graded stone aggregate as in plinth protection 75mm thick laid in bays including all necessary form work, finishing exposed edges fair and providing 10 mm wide joints throughout the thickness of plinth protections duly filled with matic filling(one part of hot bitumen 85/25 and three parts of sand)and surfaces finished even & smooth without using extra cement complete all as specified . 32 m&l 25mm thick pcc 1:2:4 type b-0(using 12.5mm graded stone aggregate)as in sub base of floor surface finished even rough to receive floor topping complete all as specified and directed. 33 dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed. 34 m&l for granite (of any type)slab 18-20 mm thick machine cut ,bedded and jointed with gray cement slurry and pointed with white cement as in floors/ cooking plateform, with admixiture of pigment to match the shade of granite stone including grindingand polishing complete over and including20 mm thick screed bed in cm 1:6 complete all as specified . 35 m&l for granite (of any type)slab 18-20 mm thick machine cut , jointed with gray cement slurry and pointed with white cement as in vertical surfaces / dado / skirtingwith admixiture of pigment to match the shade of granite stone indluding grindingand polishing complete over and including10 mm thick backing coat in cm 1:4 complete all as specified . 36 m& l green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, including grinding and polishing providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete complete complete all as specified and directed. 37 dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. note:-the demolished material should be disposed off out side the mod land. the contractor shall quote his rates considering the above element 38 material and labour for glazed ceramic coloured tiles 7 to 8mm thick (square/rectangular )in vertical surface area of each tile exceeding 0.13 sqm but not exceeding 0.18 sqm thick set & jointed in neat gray cement slurry and pointed with coloured cement to match,the sahde of tiles laid over and including 10mm thick rendering in cm 1:4 complete all as specified and directed. 39 material and labour non-skid, ceramic coloured tiles 7 to 8mm thick (square/rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,as in floors, set and jointed ingray cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 as specified and directed. 40 material and labour non-skid, ceramic, coloured tiles 7 to 8mm thick (square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,as in floors, set and jointed ingray cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 as specified and directed. 41 material and labour non-skid, ceramic, coloured tiles 7 to 8mm thick (square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, set and jointed ingray cement slurry and pointed in white or coloured cement to matchthe shade of tiles laid over and including 10mm thick backing coat on fair faces of brick work or concrete surface in cm (1:4) complete all as specified and directed. 42 m&l for vitrified light shade ceramictiles9 to 10 mm thick polished,area of each tile exc 0.18 sqm andn exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cm 1:6 complete all as directed by engr-in-charge. 43 all as per ser item no.42 (here in before) but as in skirting laid over and including 10mm cement backing in cm 1:4. 44 material and labour for repairing of soffits of slabs/chajja, facia and similar works by dismantling of loose/ disintegrated portion of rcc upto 7.5 mtr heightand in any sitution, including provn of support,formwork and welding of reinforcement and fixing in position and with provision of weld mesh, applying dubbing 1st coat of 20 to 25mm thick in cm 1:3 finished rough and finishing coat of 10mm thick in cm (1:3) finished even and smooth without using extra cementover and including cement slurry @ 3 kg/sqm, finished even and smooth to desired shapeand applyingtwo coats of weather proof exterior emulsion paint over a coat of arylic resistant primer to match with existing surfaces complete all as specified and directed.(weld mesh measured and paid sepatrtely)note:-(i) unit rate of this item includes the cost of scaffolding, formwork etc. and nothing extra shall be paid on account of variation in height.(ii) for payment purpose, the area of finished plaster in 2nd coat shall be considered. 45 material and labour for hard drawn steel wire fabric (weld mesh) of weight not less than 3 kg/ sqm and not exc 4 kg/ sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt including necessary fixing arrangements etc complete all as specified and directed. 46 taking down cementplaster of any description on brick wall surfaces etc including raking out joints hacking for key , scrubbing down down with water etc complete all as specified and directed. note:- the demolished materials should be disposed off at a site as described by the eng-in-charge. the contractor shall quote his rates considering the above element. 47 m&l for rendering 10 mm thick on ceiling (brick or concrete surfaces)in cement mortar 1:4 and surface finished even and smooth without using extra cement complete all as specified and directed. 48 m&l for rendering 15mm thick on brick or concrete surfaces in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed. 49 m&l forrendering 15mm thick on brick or concrete surfaces other than fair face of brick work in cement mortar 1:4, finishing surfaces even and smooth without using extra cement complete all as specified and directed. 50 m&l for applying three coats of white wash on newly plasteredsurfaces of ceiling including preparation of surfaces complete all as specifed and directed. 51 m&l for preparation of newly plastered or unplastered surfaces of walls and applying two coats of exterior acrylic emulsion in any pattern (approved by ge), paint over and including a coat of exterior primer complete all as specified and directed. 52 m&l for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted over and including a coat of primer complete all as specified and directed. 53 material & labour for prepapration of new or previously untreated surfaces of wood or wood based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over & including a coat of pink primer comlplete all as specified and directed. 54 material & labour for prepapration of new or previously untreated steel or iron surfaces of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over & including a coat of red oxide primer comlplete all as specified and directed. 55 material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified. 56 material and labour for preparation of plastered or unplastered old decorated surfaces of ceiling etc. incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified. 57 material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of oil bound distemper complete all as specified & directed. 58 material and labour for comple removal ofold decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying two coats of oil bound distemper complete all as specified & directed. 59 m&l for complete removal of existing treatment on walls and applying two coat ofoil bound distempe paint interior gradeover & including a coat of alkali resistant priming paint over 7 including two layer of birla wall putty (min thickness 3mm) incl filling in craks etc to achieve a uniformsmooth finish incl preparationof surfaces complete all as specified & directed . 60 material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of plastic emulsion complete all as specified & directed. 61 m&l for preparation of old painted surface of wood and wood based materials of any description not otherwise described over 10 cm. width or girthshallapplying one coat of synthetic enamel painting overthe wooden surfaces all as specified & directed. 62 m&l for preparation of old painted surfaces of steel and iron work of any description exc 10 cm width or girth applying one coat of synthetic enamel paint on steel surface all as specified. 63 taking up or down 15 mm bore steel tubing & connections including clearing for refixing or removal to store complete all as specified and directed. 64 all as perserial item 63 here in before but 20m bore tubes 65 supply and fixing15mm bore tubes “medium grade”, galvanized, with and including all fittings and fixed completetowalls and ceilings or laid in floors,complete all as specified and directed. 66 all as per serial item 65 here in before but 20m bore tubes 67 s&f as in repair pillar taps long body fancy type quarter turn with capasten head chromium plated screwed down high pressure with without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. 68 supply and fixing as in repairs bib cock quarter turn cast copper alloy chromium plated, fancy type, long body screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 69 s & f as in repairs two way angle cock quarter turn cast copper alloy 15 mm bore chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioin fixed complete all as specified and directed. 70 s & f as in repairs angle cock quarter turn cast copper alloy 15 mm bore chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioin fixed complete all as specified and directed. 71 supply and fixing as in repair central hole basin mixer long swang nack, without poup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 72 supply and fixing as in repair central hole sink mixer long body swang nech for mixing hot & cold water, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 73 s&f as in repair brass cp wall mixer 3-in-1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe, connecting legs and wall flange for mixing hot and cold water screwed down for iron pipe 15 mm complete all as specified and directed. 74 s&f as in repair brass cp wall mixer 2-in-1 system with provision for over head shower complete with 115mm long bend pipe on upper side, connecting legs and wall flange for mixing hot and cold water screwed down for iron pipe 15 mm complete all as specified and directed. 75 supply & fixingas in repair chromium platedshower rose with or without swivel joints 125mm dia including fixing to steel pipe,complete all as specified and directed. 76 supply& fixing as in repair toiletpaper holder of brass chromium plated, complete all as specified and directed. 77 supply& fixing as in repairs pvc (ptmt) float valve,high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed suitable for 20mm bore pipe,complete all as specified and directed. 78 supply& fixing as in repairs pvc waste down pipeof 32/40 mm bore for basin, complete all as specified and as directed. 79 supply and fixing as in repairs 15mm dia pvc connection of length 450 mm, with ptmt nut, complete all as specified and directed. 80 supply and fixing as in repairs faucet health (hand jet) 15mm bore cast copper alloy, chromium plated with flexible chromium plated connection pipe 1.5 mtr length, with fittings, complete all as specified and directed. 81 supply& fixingas in repairs wash hand basin, vitreous china, white, decorative type, flat or angleback, size 580mm x 450mm inclusive ofwaste pipe and brass coupling and including cutting for and pinning in ends of brackets or erecting stand and inclusive of cost of brackets complete all as specified and directed. 82 s&f as in repair vitreous china pedastal pattern, wc incl connection to trap, and to flushing pipe anti-syphonage pipe, etc. complete all as specified and directed. 83 s&f in repair rimless single piece wc with uf soft close slim seat cover, hinges, fixing accessories set , incl cisternfittings, size 385x720x715mm complete all as specified directed by engr-in-charge. make: jaguar/cera/hindware 84 supply and fixing as in repair pvc valve less syphonic action type flushing cistern low level white with pvc in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including pvc connection and 32mm dia pvc long bend for squat pattern etc, set with concrete and making good to floor including taking down existing, fixed as in repairs complete all as specified & directed. 85 s&f as in repair ptmt seat cover white colour for padastal pattern,incl connection nut & bolts, etc. complete all as specified and directed. 86 s&f as in repair sinks with drain board made of stainless steel sink of 1mm thick sheet, kitchen or laboratory with plug washer and waste pipe incl bedding in cement mortar 1:6 on to draft wall of including fixing cantilever brackets and connecting unions overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed as in repairs complete all as specified. 87 supply& fixingas in repair pvc bath cabinet, size 622mm x 422mm, comprising of lookingglass, space for bath soaps, shampoo, tooth brush and paste, hand towel rail, complete all as specified and directed. 88 supply and fixing in repair stainless steel towel rack 600mm long with lower hangers incl 3 hooks complete all as specified and directed. 89 supply and fixing in repair brass chromium plated tubular towel rail 20mm dia d type 60 cm long between flanges complete all as specified and directed. 90 supply and fixing as in repair soap dish chromium plated of size 100 x 100 mm any type, fixed with chromium plated brass screwscomplete all as specified and directed. 91 s & f as in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws, complete all as specified and directed. 92 s&f as in repairs corner glass shelf with cp brackets (3 pcs set having size 8,10 & 12)complete all as specified and directed. 93 demolition and breaking up drain pipes 110/75 mm bore (salt glazed ware, ac or reinforced concrete) set in cement mortar complete all as specified and directed. 94 s&f 110mm dia pvc (swr) pipes single socketed in any length with rubber ring joints fixed to wall &laid in trenches or in floors,including clamps as required, complete all as specified and directed. 95 s&f 75mm dia pvc (swr) pipes single socketed in any length with rubber ring joints fixed to wall &laid in trenches or in floors,including clamps as required, complete all as specified and directed. 96 s&f in repair 75mm dia pvc (swr) floor trap plain with cp grating including jointing with solvant cement incl necessary pcc & form work as required complete all as specified and directed. 97 s&f 75mm dia pvc (swr) bends with rubber ring joints fixed as required with oval access door complete all as specified and directed. 98 s&f 110mm dia pvc (swr) bends with rubber ring joints fixed as required with oval access door complete all as specified and directed. 99 s & f 110mm bore pvcswr junction single (single t) with access door complete all as specified and directed 100 s&f in repairs stainless steel plate rack of size 78cmx91cmx25cm made out of 0.80 mm thick of stainless steel sheet , fixed in wall with rawl plugs and screws complete all as specified and directed. 101 dismantling boarding, any description any size , fixed in any position with screws complete all as specified . 102 m& l for 18 mm thick pvc board celuka ply of density 600kg/cum one side prelam/rigid laminated (colour/shade as approved by engr-in-charge) and other side plain white colour to make kitchen cabinet shutters /shelves/partitions and incl all required brackets ss screws etc, approved by engr-in-charge. 103 m& l for 18 mm thick pvc board celuka ply of density 600kg/cum both sidesplain white colour to make kitchen cabinet shutters/shelves/partitions and all required brackets ss screws etc, approved by engr-in-charge. 104 s&fin repair auto closes clip on cabinet hinges (regular) for kitchen cabinet shutters note : each pair means one piece fixed on openable shutter and other piece fixed on fixed portion. 105 s&fin repair stainless steel (ss 304) handles 100 mm size for kitchen cabinet shutters. 106 s&fin repair ball bearing drawer channel telescopic type (500mm) full extention load of load bearing capacity 45 kg.note : each pair means 2 nos of telescopic channel, one piece fixed on left side and another piece fixed on right side. 107 s&f rab door seal bottom brush duststopper with aluminium plate nylone brush of selected colour for fit each complete all as specified and directed. note : the sample of item shall be approved by ge before placing at site 108 supply and fixing powder coated aluminium (minimum thickness of powder coating 50micron) work for frames of doors, windows,ventilators and partitions (fixedportions) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, c.p. brass/ stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge note:-for payment purpose weight of aluminium section will only be measured 109 providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber/ neoprene gasket required (fittings such as hinges,handle,tower bolt,sliding boltshall be paid for separately) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, c.p. brass/ stainless steel screws,rollers & dust proof brush for sliding door / windowcomplete all as per architectural drawings and the directions of engineer-in-charge note:-for payment purpose weight of aluminium section will only be measured 110 s & f as aluminium grill of size, 85mm x 85mm hexagonal shaped mesh, fixed to aluminium frame work with u clip of size 15mmx12mm & fastners complete all as specified and directed. 111 s & f4.80 mm thick sheet glass ofordinary quality plain / tintedand glazing with rubber beads, clips etc complete all as specified and directed. 112 s & f 3 mm thickhigh quality, durable acrylic panel sheet and glazing with rubber beads, clips etc complete all as specified and directed. 113 s & f double action floor door spring hydraulically regulated made up minimum1.25 thick aluminium alloy sheet foundation box, main body stainless steel cover, with governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified 114 s&f conceled lock (push to unlock) for sliding window made with zinc body, aluminium hook and anti rust material with power coated metallic finish of approved colour having size100mm x 24 mm incl necessary cutting for fixing all as specified and directed.

State Government

TRN :49068805 | 16 May, 2025

Tender Value : 0

Malda - West Bengal

Tender for operation and maintenance of intermediate pumping arrangement (capacity- of glr 500 m3) and other electrical accessories at majhikhanda boosting station under sub surface water based piped water supply scheme at tapan eastern sector in the district

State Government

TRN :49068978 | 20 May, 2025

Tender Value : 39.38 Lacs

Bikaner - Rajasthan

Tender for tender for repair and beautification work of the park near neelkanth mahadev temple in muralidhar vyas nagar, bikaner - 1 dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 2 surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr. and lift up to 1.5 mtr. : all kinds of soil 3 cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable materialby manualmeans with all lifts as per morth specification clause 201. lead upto 1000 mgirth above 2700 mm to 4500 mm 4 girth above 4500 mm 5 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils 6 carriage of earth sand line murom with all leads 7 providing and laying in position cement concrete including curing, compaction etc complete in specified grade excluding the cost of centering and shuttering- all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 8 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). 9 brick work with common burnt clay f.p.s.(non modular) bricks of class designation 100 infoundation and plinth withcement mortar 1 : 6 (1 cement : 6 coarse sand) 10 brick work with common burnt clay f.p.s.(non modular) bricks of class designation 100 in superstructure above plinth level upto floor five level in all shapes and sizes in : cement mortar 1: 6 (1 cement : 6 coarse sand) 11 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. 12 finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 13 providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 14 painting with synthetic enamel paint of approved brand and manufacture to give an even shade :two or more coats on new work 15 supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth 16 supply of dry manure including loading unloading,transportation & stacking at site. compost 17 preparation of soil including cleaning & removing of unwanted shrubs removal of stones & garbage. 18 digging of pits size 60x60x60 cms. including removal of stones manuring applicable of insecticides & watering atleast 15 litre per plant after plan ting. 19 suppling and laying of prepared& fully developed slection ist lawn rolls, including cost & tranporation of lawn rolls, preparation of bed also cost of all labours, manur water charges, removing of grass and stone from beds. maintance of lawn upto three monthsall work executed as per direction of engineer incharge. (approved by chief eng. kota) 20 supply of champa plant of ht 5 to 6 feet having age 1/2 to 3/4 year minimum fully developed including cost of growing of tree, cost of manure watering charge & maintances of tree to next six months with replacement of tree with new one if plants is dead complete as per direction of engineer in charges. (approved by chief eng. kota) 21 planting of trees /shrubs/ hedge and climbers plants at desired distance in row and watering 22 supply of different varieties of bougainvillea in ply bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. completedifferent varieties of bougainvillea 600mm to 900mm 23 supply of different varieties of rose plants in poly bag/ earthen pot according to height growth and age of the plant at site including loading unloading and transportation etc. completedifferent varieties of grafted rose plants in poly bag 1 to 1½ feet 24 supply of different varieties of palms in poly bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete arica palm many branches 5 to 6 feet 25 maintenace of plants by the contractor including of pits/bids watering preparation of thavala hoeing weeding etc. & application of insecticides etc. & security if the plant die during maintenance contractor has to replace same height plant at his own cost. 26 providing & fixing of pre cast coated concrete bench made of m-20 reinfor cement concrete having each bench consists of 2 no.s l-shape base support in white cement color (thickiness:-100 mm, back height: 1000 mm, front height :450 mm, base width: 620mm) and 2 nos. reinforced concrete planks in yellow & red color of size 1200 mm x 150mm x 50 mm, supreme designds smooth surface finish and durable structure.overall dimensions: seating length of the bench: 1200; seating heigh of the bench 450 mm total height of the bench 1000 mm

Related Searched Keywords : water main

List of water-main Tenders

Tender for tender for improvement of filter water supply by replacing 100 mm dia. 0.1. main at 371e, suren sarkar road and its surrounding areas ¡n ward no. 33.

Tender for tender for development of filter water supply at 6b, b!7a1h12, 88 kavi sukanta sarani and their adjacent areas by replacing existing old and worn out 150 mm dia. filter water service mains and allied works in ward no. 35.

Tender for providing and laying of new water supply line from main gate to wtp plant at 06 bn ndrf, jarod, vadodara(gujarat).

Tender for maintenance of various colonies under nazul a/c -ii, dwarka zone supplying of water through tankers for automatic misting system on road no. 224, near sector -6 and 7 red light dwarka.

Tender for tender for annual comprehensive maintenance contract of window/split ac’s and water coolers installed at msebhcl’s offices, guest houses and vip staff quarters in mumbai area.

Tender for operation and maintenance of intermediate pumping arrangement (capacity- of glr 500 m3) and other electrical accessories at majhikhanda boosting station under sub surface water based piped water supply scheme at tapan eastern sector in the district

Get water main Tender Alert...

Related Searched Keywords : water main

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us