Indian Tenders Tender information of India
Global Tenders International Tender information
Projects Project information of India
Tender Awarded Tender awarded information
Sub-Contractor Vendor information of India
Pay Online
Register now
Login
Contact Info All India : 9276083333 / 9274315555 South India : 9274315555

Filters

List of wire-cut-machine Tenders

List of latest wire-cut-machine Tenders in Indian Tenders. Click on any wire-cut-machine Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for wire-cut-machine Tenders.

All-Tenders (28)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :49019244 | 14 May, 2025

Tender Value : 10.00 Lacs

Gandhidham - Gujarat

Tender for annual rate contract for various materials (retail goods) supply work at gandhidham municipal corporation area, gandhidham.; 1 showel (good quality) 1.00 nos 2 wooden handletrikam perfect for digging shovel (good quality) 1.00 nos 3 galvanized iron ghamela (good quality) 1.00 nos 4 baldi galvanized (good quality) 1.00 nos 5 rassi dori (good quality) 1.00 kg 6 kulhadi (good quality) 1.00 nos 7 chisel (good quality) 1.00 nos 8 dharia (good quality) 1.00 nos 9 hammer (good quality) 1.00 nos 10 hammer ghan (good quality) 1.00 nos 11 hose pipe (green) 2 1.00 rmt 12 hose pipe (green) 3 1.00 rmt 13 hose pipe (green) 4 1.00 rmt 14 sunction pipe (garden pipe) 1/2 1.00 rmt 15 sunction pipe (garden pipe) 3/4 1.00 rmt 16 sunction pipe (garden pipe) 1 1.00 rmt 17 sunction pipe (garden pipe) 2 1.00 rmt 18 binding wire 1.00 bundle 19 oil paint (nerolac/asian) 1.00 liter 20 distemper 1.00 liter 21 cotton rassi 1.00 nos 22 pry bar (parai) 1.00 nos 23 cane (lakdi) 1.00 nos 24 oil paper 1.00 nos 25 grease 1.00 kg 26 nylon dori 1.00 kg 27 tarpaulin sheet 10 x 15 1.00 nos 28 tarpaulin sheet 15 x 20 1.00 nos 29 combination pliers taparia 1.00 nos 30 screwdriver set taparia 1.00 nos 31 line tester taparia 1.00 nos 32 big hacksaw blade with frame taparia 1.00 nos 33 big hacksaw blade taparia 1.00 nos 34 mini grinder with cutting blade (good quality) 1.00 nos 35 mini grinder cutting blade (good quality) 1.00 nos 36 single face air blower (good quality) 1.00 nos 37 speed reversible hammer drill machine (good quality) 1.00 nos 38 crimping tools 10mm to 50mm fixed size 1.00 nos 39 drill bit 6mm 1.00 nos 40 drill bit 8mm 1.00 nos 41 drill bit 10mm 1.00 nos 42 gumboots (good quality) 1.00 nos 43 hand gloves (good quality) 1.00 nos 44 mask 1.00 nos 45 safety belts (good quality) 1.00 nos 46 folding ladders (good quality) 1.00 nos 47 aluminium ladders 6 feet 1.00 nos 48 aluminium ladders 12 feet 1.00 nos 49 nails - dhroba 1.00 kg 50 braker machine 1.00 nos 51 cutting machine 1.00 nos 52 lime - wet (5 kg packing ) 1.00 kg 53 brush - fargo company 1 1.00 nos 54 brush - fargo company 2 1.00 nos 55 brush - fargo company 3 1.00 nos 56 brush - fargo company 4 1.00 nos 57 paint roller set 2 1.00 nos 58 paint roller set 4 1.00 nos 59 paint roller set 6 1.00 nos 60 paint roller set 9 1.00 nos 61 paint roller set 2 1.00 nos 62 road safety cone 1.00 nos 63 ghamela heavy 1.00 nos 64 garden pipe (heavy duty) 1/2 to 1 1.00 per 100 feet roll 65 dhoriya pipe 3 1.00 per roll 66 dhoriya pipe 4 1.00 per roll 67 dhoriya pipe 5 1.00 per roll 68 dhoriya pipe 6 1.00 per roll

State Government

TRN :49019760 | 13 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for tender for pd campus colony - dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. dsr -15.56 2 12 mm cement plaster of mixwith 1:6 (1 cement: 6 coarse sand) dsr 13.4.2 on wall. 3 12 mm cement plaster of mixwith 1:4 (1 cement: 4 coarse sand) dsr 13.4.1 on celling. 4 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dsr-9.21.1 5 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with second class teak wood beading 62x19 mm.dsr-9.51.1 6 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completedsr - 13.88 7 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.dsr-13.80 8 finishing walls with water proofing cement paint of required shade .( old work one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. ) dsr-13.109.1 9 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .dsr-13.81 10 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old workdsr-13.99.1 11 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.15 mm nominal dia pipes . dsr 18.8.1 12 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 25 mm nominal dia pipes . dsr 18.8.3 13 providing and fixing c.p. brass bib cock of pproved quality conforming to is:8931 : 15 mm nominal bore sor/dsr 18.49.1 14 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with asingle 15 mm c.p. brass pillar tap dsr 17.7.2 15 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests dsr 17.1.2 16 brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) . with f.p.s.(non modular) bricks .dsr-6.4.2 17 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate dsr 11.3.1 18 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity - white .dsr-17.18.1 19 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr-18.48 20 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). dsr 4.1.8 21 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter dsr12.41.2 22 renewing glass panes, with putty and nails wherever necessary including racking out the old putty:float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) dsr14.5.1 23 cleaning of chocked sewer line by diesel running vehicle mountinghydraulic operated high pressure suction cum jetting sewer cleaningmachine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150 mm dia upto 300 mm dsr 14.77

State Government

TRN :49020042 | 13 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for tender for annual repair to rawatpur colony type-iv servant qatar - dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. dsr -15.56 2 12 mm cement plaster of mixwith 1:6 (1 cement: 6 coarse sand) dsr 13.4.2 on wall. 3 12 mm cement plaster of mixwith 1:4 (1 cement: 4 coarse sand) dsr 13.4.1 on celling. 4 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dsr-9.21.1 5 providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :200x10 mm dsr9.74.2 6 providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm dsr 9.75.1 7 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per is: 1378) 300x16 mm dsr 9.62.2 8 providing and fixing bright finished brass handles with screws etc.complete: 125 mm dsr 9.81.3 9 providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete dsr 9.82 10 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with second class teak wood beading 62x19 mm.dsr-9.51.1 11 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completedsr - 13.88 12 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.dsr-13.80 13 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work (two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface dsr-13.112.1 14 finishing walls with water proofing cement paint of required shade .( old work one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. ) dsr-13.109.1 15 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .dsr-13.81 16 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old workdsr-13.99.1 17 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc., complete. dsr-11.39 18 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complet size of tile 600x600 mm .dsr-14.41.2 19 providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge. with granite stone of area less than 0.50 sqm. dsr 16.86.1 20 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.15 mm nominal dia pipes . dsr 18.8.1 21 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 25 mm nominal dia pipes . dsr 18.8.3 22 providing and fixing c.p. brass bib cock of pproved quality conforming to is:8931 : 15 mm nominal bore sor/dsr 18.49.1 23 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore sor/dsr 18.50.1 24 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15 mm nominal bore sor/dsr 18.53.1 25 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931.15 mm nominal bore dsr 18.52.1 26 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with asingle 15 mm c.p. brass pillar tap dsr 17.7.2 27 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests dsr 17.1.2 28 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredw.c. pan with isi marked white solid plastic seat and lid dsr 17.2.1 29 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 17.9.1 white glazed fire clay kitchen sink of size 600x450x 250 mm .dsr -17.9.1 30 providing and fixing t-iron frames for doors, windows and ventilators of mild steel teesections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).40x40x6mm@3.5kg/m . dsr 10.13.1 31 brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) . with f.p.s.(non modular) bricks .dsr-6.4.2 32 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate dsr 11.3.1 33 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity - white .dsr-17.18.1 34 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr-18.48 35 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter dsr12.41.2 36 renewing glass panes, with wooden fillets wherever necessary:float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) dsr14.6.1 37 cleaning of chocked sewer line by diesel running vehicle mountinghydraulic operated high pressure suction cum jetting sewer cleaningmachine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150 mm dia upto 300 mm dsr 14.77 38 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) dsr 5.2.2 39 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more.dsr 5.22a.6 40 centering and shuttering including strutting, propping etc. and removal of form work for : columns, piers, abutments, pillars, posts and struts.dsr 4.3.3

State Government

TRN :49020061 | 13 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for tender for annual repair to mc robertganj colony - dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. dsr -15.56 2 12 mm cement plaster of mixwith 1:6 (1 cement: 6 coarse sand) dsr 13.4.2 on wall. 3 12 mm cement plaster of mixwith 1:4 (1 cement: 4 coarse sand) dsr 13.4.1 on celling. 4 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dsr-9.21.1 5 providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :200x10 mm dsr9.74.2 6 providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm dsr 9.75.1 7 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per is: 1378) 300x16 mm dsr 9.62.2 8 providing and fixing bright finished brass handles with screws etc.complete: 125 mm dsr 9.81.3 9 providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete dsr 9.82 10 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with second class teak wood beading 62x19 mm.dsr-9.51.1 11 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completedsr - 13.88 12 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.dsr-13.80 13 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work (two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface dsr-13.112.1 14 finishing walls with water proofing cement paint of required shade .( old work one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. ) dsr-13.109.1 15 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .dsr-13.81 16 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work dsr-13.99.1 17 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc., complete. dsr-11.39 18 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complet size of tile 600x600 mm .dsr-14.41.2 19 providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge. with granite stone of area less than 0.50 sqm. dsr 16.86.1 20 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.15 mm nominal dia pipes . dsr 18.8.1 21 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 25 mm nominal dia pipes . dsr 18.8.3 22 providing and fixing c.p. brass bib cock of pproved quality conforming to is:8931 : 15 mm nominal bore sor/dsr 18.49.1 23 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore sor/dsr 18.50.1 24 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15 mm nominal bore sor/dsr 18.53.1 25 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931.15 mm nominal bore dsr 18.52.1 26 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with asingle 15 mm c.p. brass pillar tap dsr 17.7.2 27 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests dsr 17.1.2 28 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredw.c. pan with isi marked white solid plastic seat and lid dsr 17.2.1 29 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 17.9.1 white glazed fire clay kitchen sink of size 600x450x 250 mm .dsr -17.9.1 30 providing and fixing t-iron frames for doors, windows and ventilators of mild steel teesections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).40x40x6mm@3.5kg/m . dsr 10.13.1 31 brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) . with f.p.s.(non modular) bricks .dsr-6.4.2 32 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in:: cement mortar 1:6 (1 cement : 6 coarse sand)dsr 6.1.2 33 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate dsr 11.3.1 34 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity - white .dsr-17.18.1 35 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr-18.48 36 earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by engineer-in-charge. all kinds of soil dsr 2.6.1 37 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). dsr 4.1.8 38 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter dsr12.41.2 39 renewing glass panes, with wooden fillets wherever necessary:float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) dsr14.6.1 40 cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150 mm dia upto 300 mm dsr 14.77 41 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) dsr 5.2.2 42 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more.dsr 5.22a.6 43 centering and shuttering including strutting, propping etc. and removal of form work for : columns, piers, abutments, pillars, posts and struts.dsr 4.3.3

State Government

TRN :49020519 | 15 May, 2025

Tender Value : 0

Pandavapura - Karnataka

Tender for tender for melukote gp nrlm shed - ppura mason class 1,eletrification,gst,ppura cp brass waste 32 mm of standard pattern,ppura brass stop cock,ppura lead or pvc connection pipe 32mm dia (for wash basin),ppura licenced plumber with tools,ppura pvc pipe of 4kg cum,63 mm,ppura pvc pipe of 4kg cum,110 mm,ppura polyenthylene water storage tank of specified capacity l,ppura labour charges for lifting and placing in position and making connection at 7%,ppura handling loading and unloading 3% on material,ppura water proofing cement paint,ppura add brush, putty, sand paper at 2% on cost of paint,ppura plastic emulsion paint,ppura add brush, putty, sand paper, roller at 5% on cost of paint,ppura enamel paint,ppura transportation charges of materials beyond 5 km10%,ppura cost of 6.5mm m.s. coil,ppura fabrication charges.,ppura mason class 2,ppura rcc cap 1000 mm dia, 100 mm thick,ppura corpenter,ppura corpenter avrage,ppura chrominum plated screws,ppura 5.50 mm thick plain glass,ppura fabricator,ppura add hom of welding and grinding machine 2% on material,ppura formwork, centering & scaffolding for plastering & painting of ceiling - 25%,ppura vitrified tiles 600x600 mm,ppura high bond tile adhesive for vitrified tiles,ppura adhesive for joints,ppura machine polished granite stone slabs 20 mm,ppura stone dresser (with tools),ppura ceramic tiles of size 30 x 30 cms,ppura white cement,ppura orissa pattern of size 580x440mm with integral type foot rests,ppura 100mm s or p trap,ppura p.v.c. flushing cistern 10 lts low level with fitting,ppura c.i. / m.s. brackets for flushing cistern,ppura g.i. 32mm dia telescopic flush pipes with fittings specials,ppura m.s. holder bat clamp 32mm,ppura g.i. overflow pipe 20mm dia,ppura special for overflow pipe,ppura mosquito proof coupling 25mm,ppura add white lead paint, gasket, cement, sand for making good the wall and floor,ppura white vitreous china clay flat back wash basin size 630x450mm,ppura copper plated brass piller tap 15mm,ppura cp brass chain with plug,ppura binding wire,ppura m.s rods,ppura ms flat,ppura fitter class i,ppura welder grade i,ppura add hom of welding and grinding machine 4% on material,ppura ready mix primer paint (ready mix red lead paint),ppura add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint,ppura painter class i,ppura add providing and removing scaffolding at 3% on labour,ppura add handling , loading and unloading at 2% on material,ppura enamel metal paint,ppura add brush at 1% on cost of paint,ppura mathi/nandi wood planks for panels 25 mm thick,ppura add cutting and other wastage 5%,ppura hom of machinaries for planing,ppura mathi/nandi wood scantling,ppura unit cost as per the specification,ppura powder coated 60-70 micron,ppura nylon rollers,ppura rubber beading for shutters beading,ppura pvc beading,ppura alluminium tower bolt - 20 cm,ppura alluminium handles - 15 mm,ppura cleat angles,ppura coarse sand (zone iii),ppura portland cement,ppura mixer (concrete) - 1 cum capacity,ppura add watering charges at 1 % on material,ppura add sundries charges at 1 % on material,ppura over head & other miscellaneous charges,ppura size stone 20 x 20 x 25 cms,ppura bond stone 20 x 20 x 45 cm,ppura boulders,ppura mixer (concrete small used in culvert),ppura mason class i (with tools),ppura mason class ii (with tools),ppura stone chistler class ii,ppura plasticizer / super plasticizer,ppura hom of vibrator 0.71 days,ppura add sundries charges at 1 % on labour,ppura add watering charges at 1 % on labour,ppura formwork, centering & scaffolding for beams & lintels of building - 60%,ppura formwork, centering & scaffolding for roof (straight & arched) - 50%,ppura burnt bricks of class designation 35 modular,ppura casurina poles 100 - 150 mm,ppura add handling , loading and unloading at 1% on material,ppura add sundries charges at 2 % on material,ppura formwork, centering & scaffolding for chejjas, canopy & other architectural,ppura tmt bars fe 500,ppura broken stone aggregate 40 mm size,ppura broken stone aggregate 20 mm size,ppura broken stone aggregate 12 mm to 10 mm size

Local Bodies

TRN :49020595 | 01 Jan, 0001

Tender Value : 0

Mandi - Himachal Pradesh

Tender for tender for supply of sand ceiling color stone stone (cut store) brick clay kiln soil cutting and breaker by cb machine material eplant (including unloading from somet sunaag) dector jeep gadhar gadhar & karsog to kakadadhar by other vehicles shuttering iron & wooden wooden, leigh & aluminium fittings & doors with ply board other filling lig pvc fair sheets leka ret pelling pvc hardware (barriers, signal bar, 6ting. pvc/hdpe container various siddhas, sanitary fittings & lavour rent etc.) colour coated roof sheet etc. ceiling sheets etc. solar street lights 9.12. war lights repair, high mask lights furniture items (all types of niche sewage mixer machine painter wall writing sandwich, pear plants authorized by horticulture department electrical fitting materials and services lcd bar, mike, computer.19, projector, etc. gas detergent stationery various items for sanitation management dalan, reservoir site chachar by horse cart wire span other materials to be used in panchayat work should be mentioned above.

State Government

TRN :49020624 | 14 May, 2025

Tender Value : 11.82 Lacs

Katageri - Karnataka

Tender for supply of materials to construction katageri nrlm shed - pvc pipe of 10kg/cum,90 mm (kat01),rcc cap 1000 mm dia, 100 mm thick (kat01),transportation charges of materials beyond 5 km at 10 percentage (kat01),labour charges for handing errection of rcc rings etc. at 5 percentage (kat01),fabrication charges. (kat01),cost of 6.5mm m.s. coil (kat01),polythylene pipes high density 25mm external dia (kat01),add 5 percentage for fittings and wastage charges (kat01),licenced plumber with tools (kat01),add cement sand and grit 1 percentage on material (kat01),add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material (kat01),a 100mm s or p trap (kat01),indian type water closet of size 580 mm of specified make with footrests (kat01),handling loading and unloading 3 percentage on material (kat01),labour charges for lifting and placing in position and making connection at 7 percentage on material (kat01),polyenthylene water storage tank of specified capacity l (kat01),enamel paint (kat01),add brush, putty, sand paper at 5 percentage on cost of paint (kat01),liquid wood filler (kat01),add brush, putty, sand paper at 2percentage on cost of paint (kat01),water proofing cement paint (kat01),add brush, putty, sand paper, roller at 5 percentage on cost of paint (kat01),plastic emulsion paint (kat01),white cement (kat01),ceramic tiles 30 x 30 cms (kat01),add brush at 1 percentage on cost of paint (kat01),enamel metal paint (kat01),painter class i (kat01),add wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint (kat01),ready mix primer paint (ready mix red lead paint) (kat01),add hom of welding and grinding machine at 4 percentage on material (kat01),welder grade i (kat01),fitter class i (kat01),ms flat (kat01),m.s rods (kat01),unit cost as per the specification (kat01),mathi/nandi wood scantling (kat01),hom of machinaries for planing (kat01),add cutting and other wastage 5 percentage (kat01),mathi/nandi wood planks for panels 25 mm thick (kat01),vitrified tiles 600x600 mm (kat01),add providing and removing scaffolding at 3 percentage on labour (kat01),solid concrete blocks (40x10x20 cms)-4.00 n/sqmm (kat01),add handling , loading and unloading at 1 percentage on material (kat01),solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm (kat01),jungle wood runners and planks (kat01),casurina poles 75 - 100 mm dia (kat01),add sundries charges at 2 percentage on material (kat01),add handling , loading and unloading at 2 percentage on material (kat01),casurina poles 100 - 150 mm (kat01),silver oak or equivalent planks 38 mm thick (kat01),add watering charges at 1 percentage on labour (kat01),add sundries charges at 1 percentage on labour (kat01),stone chistler class ii (kat01),mason class ii (with tools) (kat01),mason class i (with tools) (kat01),mixer (concrete small used in culvert) (kat01),boulders (kat01),bond stone 20 x 20 x 45 cm (kat01),size stone 20 x 20 x 25 cms (kat01),binding wire (kat01),tmt bars fe 500 (kat01),hom of vibrator 0.71 days (kat01),plasticizer / super plasticizer (kat01),granite/trap broken metal 100 mm and down size (kat01),transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (kat01),add sundries charges at 1 percentage on material (kat01),add watering charges at 1 percentage on material (kat01),mixer (concrete) - 1 cum capacity (kat01),portland cement (kat01),coarse sand (zone iii) (kat01),broken stone aggregate 12 mm to 10 mm size(kat01),broken stone aggregate 20 mm size (kat01),broken stone aggregate 40 mm size (kat01)

State Government

TRN :49020629 | 13 May, 2025

Tender Value : 5.87 Lacs

Katageri - Karnataka

Tender for supply of materials to construction of samashan at konkonakoppa - coarse sand (zone iii) (konkonakoppa samashan),add sundries charges at 1 % on labour (konkonakoppa samashan),add watering charges at 1 % on labour (konkonakoppa samashan),transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (konkonakoppa samashan),broken stone aggregate 20 mm size (konkonakoppa samashan),broken stone aggregate 12 mm to 10 mm size (konkonakoppa samashan),portland cement (konkonakoppa samashan),mixer (concrete) - 1 cum capacity (konkonakoppa samashan),add watering charges at 1 % on material (konkonakoppa samashan),add sundries charges at 1 % on material (konkonakoppa samashan),plasticizer / super plasticizer (konkonakoppa samashan),hom of vibrator 0.71 days (konkonakoppa samashan),boulders (konkonakoppa samashan),size stone 20 x 20 x 25 cms (konkonakoppa samashan),bond stone 20 x 20 x 45 cm (konkonakoppa samashan),mixer (concrete small used in culvert) (konkonakoppa samashan),burnt bricks class 35 (non modular) (konkonakoppa samashan),casurina poles 100 - 150 mm (konkonakoppa samashan),add handling , loading and unloading at 1% on material (konkonakoppa samashan),add sundries charges at 2 % on material (konkonakoppa samashan),tmt bars fe 500 (konkonakoppa samashan),binding wire (konkonakoppa samashan),ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre (konkonakoppa samashan),ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre (konkonakoppa samashan),gusset plates 6 mm thick (konkonakoppa samashan),base plate / base plate (konkonakoppa samashan),anchor bolts 750mm (konkonakoppa samashan),corbon electrodes (konkonakoppa samashan),welder grade i (konkonakoppa samashan),hom of welding and grinding machine (konkonakoppa samashan),add (konkonakoppa samashan),hom of cutting and grinding machine (konkonakoppa samashan),ready mix primer paint (ready mix red lead paint) (konkonakoppa samashan),add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint (konkonakoppa samashan),painter class i (konkonakoppa samashan),add providing and removing scaffolding at 3% on labour (konkonakoppa samashan),add handling , loading and unloading at 2% on material (konkonakoppa samashan),enamel metal paint (konkonakoppa samashan),add brush at 1% on cost of paint (konkonakoppa samashan),tools and plants and electrical charges at 2% (konkonakoppa samashan),unit cost as per the specification (konkonakoppa samashan),mason class i (with tools) (konkonakoppa samashan),water proofing cement paint (konkonakoppa samashan),add brush, putty, sand paper at 2% on cost of paint (konkonakoppa samashan),wire mesh 50mm x 50mm (konkonakoppa samashan),aluminium paint (konkonakoppa samashan),fitter class i (konkonakoppa samashan),welding charges at 10% on material (konkonakoppa samashan),a 50 mm dia ms hollow pipe b class 14 gauge (konkonakoppa samashan),a 16 x 16 mm ms square rod (konkonakoppa samashan),a 36 mm x 6mm ms plates (konkonakoppa samashan),a 40 x 6 mm ms plates (konkonakoppa samashan),cast iron spike (konkonakoppa samashan),ball bearing hinges heavy duty (konkonakoppa samashan),anticorrosive bituminous paint (black) (konkonakoppa samashan),mechanic class ii/mechanic hmp grade i/eme grade (konkonakoppa samashan),hom of cutting and grinding machine - 1 (konkonakoppa samashan),tools and plants at 2% on material (konkonakoppa samashan),transportation loading and unloading at1% on material (konkonakoppa samashan),moulding charges for casting gaurd stones (konkonakoppa samashan),laboratory asst. (sslc passed)/mate/supervisor (konkonakoppa samashan),tractor - 40 hp (konkonakoppa samashan),a 12 x 12 gauge g.i. wire 100 mtr at ts. 8.00/ per m (konkonakoppa samashan)

State Government

TRN :49020994 | 17 May, 2025

Tender Value : 0

Karwar - Karnataka

Tender for supply & installation of various hospital necessities items and instruments - wheel chair non fold fully ss cushion,washing machine,wall mounted oxygen flow meter with humidifier,ventilator batteries (drager savina 300 compatible),thermometer manual,stretcher trolley fully ss with side railings & oxygen trolley,steel instrument trolley (55 lx40wx 76h),stainless steel instrument (14x10),sponge holder kwr,spo2 probes pediatric (drager monitor make/ compatible),spo2 probes neonatal (drager monitor make/ compatible),spo2 probes neonatal (comen monitor make/ compatible),spo2 probes neonatal (bpl monitor make/ compatible),spo2 probes adult (g3d monitor make/ compatible),spo2 probes adult (drager monitor make/ compatible),spo2 probes adult (comen monitor make/ compatible),speculam,skin temperature probes (zeal make/compatible baby warmer),skin temperature probes (phoenix make/compatible baby warmer),skin temperature probes (neokraft make/compatible baby warmer),scissor keeping tray,s.s. bin (small) 9x9,s.s. bin (medium) 11x9,s.s. bin (big) 15x12,s.s instrument tray (9x6),s.s instrument tray (8x6),s.s instrument tray (18x12),s.s instrument tray (15x12),s.s instrument tray (14x10),s.s instrument tray (12x10),resuscitation kit pediatric,resuscitation kit neonatal,resuscitation kit adult,pediatric ambu bag 750 ml,pediatric ambu bag 500 ml,patient monitor bp cuffs pediatric (drager monitor compatible),patient monitor bp cuffs neonatal (drager monitor compatible),patient monitor bp cuffs neonatal (comen monitor compatible),patient monitor bp cuffs neonatal (bpl monitor compatible),patient monitor bp cuffs adult (g3d monitor make/compatible),patient monitor bp cuffs adult (drager monitor compatible),patient monitor bp cuffs adult (comen monitor compatible),oxygen trolley jumbo fully ss,oxygen sensor (accutronic make/compatible, fabian hfo pediatric/ neonatal ventilator,oxygen flow meteres for jumbo cylinders dual gauge,oxygen flow meteres for baby cylinders single gauge,neonatal flow sensor (drager ventilator/ compatible),neonatal flow sensor (accutronic make/compatible fabian hfo pediatric / neonatal ventilator),neonatal ambu bag 250 ml,needle holder,medicine trolley full ss with alcon drawers size 30l x15w x36h,medical examination light led,locker (bedside),laryngoscopes kwr,laryngoscope bulbs kwr,kidney tray kwr,kellys forceps,instrument air dryer,incentive spirometry,hand air dryer,four (4) bucket dust bin system with trolley,flow sensor internal (pm care ventilator/ compatible),extension board heavy duty cable 10 meter wire,etco2 sensors (drager vista 120s 7 para monitor make/ compatible),equipment trolley,episiotomy scissor,ecg leads (drager make/compatible),digital baby & paediatric weight and height scale machine,delivery sheet,crash cart fully ss,cord cutting scissor,chittal forceps jar,cautery machine silicon patient plates and monopolar electrodes (caudra make),cautery machine silicon patient plates and monopolar electrodes (bosch india make),cautery machine silicon patient plates and monopolar electrodes (alan make),bp bladder with cuff pediatric (manual),bp bladder with cuff neonatal (manual),bp apparatus spindle/steel valve (manual),bp apparatus bulb (manual),bp apparatus (manual),bedside stool full ss,autoclave coil 9kv,autoclave coil 3kv,anterior vaginal wall,ampule cutter,adult weighing machine analog,adult flow sensor external (pm care ventilator/ compatible),adult flow sensor (drager ventilator/ compatible),adult ambu bag 1000 ml

State Government

TRN :49021266 | 20 May, 2025

Tender Value : 10.65 Lacs

Baghpat - Uttar Pradesh

Tender for tender for beautification work in nagar panchayat doghat - exavation in foundation in ordinary soil (loam,clay or sand) including lift upto 1.50 m.and including filling watering and ramming of excavated earth into the trenches or into the space beetween the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30 m. from the foundation trenchs .(where machine can not move) as per s.i. no. 251 (a) 2 concrete with 4 cm gauge brick ballast, fine sand of 1.25 f.m and cement, in the proportion of 12:6:1 in foundation and under the floor i/c supply of all materials,labour , t & petc. required for proper completion of the work. as per s.i. no. 273 3 m -150 brick work with 1:4 (one cement & four fine sand mortar ) in foundation and plinth including supply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no 305. 4 r.c.c. work with cement , approved coarse sand & 2 cm guage approved stone grit in proportion of 1:1.5:3 in lintelof doors & windows excluding supply of reinforcement and its bending .but including its fixing and binding the same with 24 b.w.g.g.i. binding wire and including necessary centering and shuttering etc. and supply of all materials ,labour,tools & plants etc.requered for proper completion of the work including cost of binding wire. but in lighter beam havingspans upto 6 m. as per s.i. no. 289 5 r.c.c. work with cement , approved coarse sand & 2 cm guage approved stone grit in proportion of 1:1.5:3 but for slab 284 6 m.s.(tor steel or plain ) in plan work such as rc.c. or r.b. work including bending for proper shape and including supply of steel & its wastage ,bend,hooks,and authorised, overlapping shall be measured and including cost of binding wire.as per s.i. no. 504, 7 m -150 brick work with 1:4 (one cement &four fine sand mortar ) in foundation and plinth including supply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no 304 .but in superstructre including necessary cutting & moulding of bricks add extra labour to this item 305+309(4300.00+225.00=4525.00) 8 cementconcrete with 2 cm gauge stone grit, coarse sand & cement in the proportion of 4 :2:1 includingsupply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no. 279(a). 9 12 mm thick plaster with cement and coarse sand mortar in 1:4 over brick work minimum thickness not be less than 1 cm including supply of all materials, labour, t & p etc. required for proper completion of the work as per s.i. no.584(a). 10 m.s. or iron work of small sizes and section such as holding down bolts ,hold fast tie rods grating etc.same as in item no. 502 above but in m.s. grills / stair case,. raling /gates/trusher racks etc. as per schidule item no. 502 (a) . 11 supply of birbed iron wire 12 supply of birbed iron wire labour only 13 earth work in cutting or embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 m in depth and earth work in embankmentto be in 20 cm layers i/cramming and dressing the surface to required levels and slopes and also i/c 1.50m lift and 30 m lead. the earth from cutting to be used in making embankment or to be deposited as per spoil banks with in 30 m distance as directed by the engineer incharge . complete in all respect as per sino. 253(a) +261 b 14 supply and laying of 80mm thick precast cement concerete i-shape interlocking paver blocks with top layer of minimum 5 mm thickness having paln dimension 200x(160+120mm) of o.p. cement , smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. the compressive strength of concrete paver block shall not less than 40mpa (m-40) and weigt 4.5kg per no. confirming to is: 15658-2006 including cost of material, with a blanket layer of 4.00cm. thick fine sand labour, t&p and vat etc required for proper completion of the work as directed by engineer-in-charge, including c.p.as per s.i. no. new item no. 14 15 construction of cc road in 1:1.5:3 16 i love doghat size (22*3 feet) 17 iron work structure 18 open gym /jhula/ bench 19 lighting work 20 providing & laying of green grass in ground with labour complete work. 21 supply & fixing of sign boardat site including letter writing, painting both side of board including supply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no.

1
2
3

Related Searched Keywords : wire cut machine

Get wire cut machine Tender Alert...

Related Searched Keywords : wire cut machine

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

Copyright ©2018 - Thetenders.com. Read Policies