Filters

List of cast-iron Tenders

List of latest cast-iron Tenders in Indian Tenders. Click on any cast-iron Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for cast-iron Tenders.

All-Tenders (244)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35883349 | 20 Nov, 2025

Tender Value : 0

Ahmednagar - Maharashtra

Tender for providing following materials - excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) bd.a.1 page no. 259 ssr item no 21.02 excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) bd.a.2 page no. 259 ssr item no 21.06 providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. bd.a. 12 page no. 264 ssr item no ssr item no 21.38 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd. e. 1 page no. 287 ssr item no 24.01 providing and laying in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.3 page no. 298 and b.7, page no.38 ssr item no 25.11 providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.5 page no. 300 and b.7, page.no. 38 ssr item no 25.31 providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.6 page no. 300 and b.7, page no.38 ssr item no 25.50 providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite/ quartzite/ gneiss metal for r.c.c. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.9 page no. 303 and b.7, page no.38 ssr item no 26.05 providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.8 page no. 302 and b.7, page no.38 ssr item no 25.70 providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. bd.f.17, page no. 306 ssr item no 26.33 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete. bd.g. 1 page no. 313 ssr item no 27.01 filling in plinth and floors with contractors material/brought from outside and approved by engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. bd.a.11 page no. 263 ssr item no 21.37 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete bd.g.5 page no. 315 ssr item no 27.05 providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. bd.l.1 page no. 367 ssr item no 32.01, 32.15 providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. bd. l.2 page no. 368 ssr item no 32.01, 32.15 providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.spec. no.: bd.l.7 page no. 369 ssr item no 32.11 providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to i.s.15622/2006 (group d ii-a) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. ssr item no 33.24 providing sills of polished kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. bd.m.29 page no. 391 ssr item no 33.20 providing and laying antiskid ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to is 15622-2006 (group-b iia) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing complete. ssr item no 33.67 providing and fixing solid core flush door shuttercommercial in single leaf 30 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel hinges and cromium plated fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.spec. no.: bd-t-36, page no. 500 ssr item no 39.10 providing and fixing in position (as per 1868 / 1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kilogram/running metre.. top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kilogram/running metre. the shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kilogram/running metre. inter locking section 40 x 18 x 1.10 mm at weight 0.469 kilogram/running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kilogram/running metre. as per detailed drawings and as directed by engineerincharge ssr item no 39.44 providing and fixing mild steel grill work weighing 20 kg / sqm. for windows, ventilators etc. as per drawing including fixtures, necessary welding & painting with one coats of anti corrosive paint & two coats of oil painting complete. ssr item no 40.01 providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding i.s. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. ssr item no 35.25 providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. ssr item no 36.12 providing and fixing m40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to i.s. 65241983 having 6 mm dia. bars 3 nos. and stirrups @250 mm c/c and fixing in wall with 6 nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . ssr item no 39.56 providing and applying two coats of lead/zinc base oil paint/bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete.(excluding primer coat). ssr item no 35.04 providing water proof bedding for flooring of bath and wc 25 mm thick in c.m. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of rs.500/- including ponding test etc. complete. ssr item no 31.05 providing and fixing 40mm diameter and 1.5 mm thick stainless steel hand railing in s.s.304 grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete ssr item no 40.06 providing and fixing heavy duty inter locking concrete coloured paving blocks of 60 mm thickness of having a strength of 300 kilogram/sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete ssr item no 33.51 providing and fixing board displaying information, such as 'name of work, tender cost, name of contractor, work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x 35 x 3 mm frame with properly cross braced m.s. angles of size 35mmx35mmx3mm duly painted including two m.s. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. spec. no. as directed by engineer in charge ssr item no 6.36 material testing charges for work constructing one room z p primary school building dighewasti at chambhurdi tal shrigonda

corporations/Associations/Others

TRN :35883624 | 27 Nov, 2025

Tender Value : 0

Salem - Tamil Nadu