Filters

List of printing-machinery Tenders

List of latest printing-machinery Tenders in Indian Tenders. Click on any printing-machinery Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for printing-machinery Tenders.

All-Tenders (10)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35498346 | 09 Oct, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for gem bids for electronic digital postal franking machine q3

Central Government/Public Sector

TRN :35499425 | 09 Oct, 2025

Tender Value : 0

Bathinda - Punjab

Tender for gem bids for job, complete vehicle servicing greasing with replacement ofitems, engine oil 15w40, air filter, oil filter, diesel filter, coolant, differential oil, filter head, filter case, primingpump, radiator reservoir tank, m and l for dismantling oftwo door glass channel repairing replacement of the undermentioned items sound free all, door gola beeding, doorrubber beeding, glass machine, glass handle, door nobe, door hinges, alternator opening checking and replacementof following worn out parts and refixing the same in originalposition, rooter, cut out, seal, bearing, pressure kit, complete rear suspension opening repairing and refittingwith the replacement of the following items all as directed, leaf spring, bush kit

Central Government/Public Sector

TRN :35499576 | 10 Oct, 2025

Tender Value : 2.80 Crore

Baramulla - Jammu And Kashmir

Tender for gem bids for ug, supply and construction of ug ops room excavation inover area getting out in hard dense soil n exc 1 50 m deep ditto but exc 150m but n exc 3 0 m ms steel formwork tosides of concrete ms steel formwork finished formwork tofaces of walls ms steel formwork finished formwork tosides and soffits of floor or roof beams ms steel formworkfinished formwork to soffits of suspended slabs ms steelformwork finished formwork to staircases with sloping orstepped soffits including risers and stringers excludinglanding surface excavation n exc not exceeding 30 cmdeep and averaging 15cm deep and getting out in harddense soil returning filling in including spreading levellingwatering and well ramming in layers not exc 25 cm removing excavated material exc 250m n exc 500m anddepositing where directed at a level n exc 1 5 m above thestarting point water proofing compound providing andapplying smartcare dampproof a fibre reinforcedelastomeric liquid water proofing membrane applyingevenly a tack coat of in dustrial bitumen 85 25 at the rate of1 2 kg per sq m including cleaning surfaces app basedpolymeric membrane minimum weighing 3kg sqm andminimum 3mm thick reinforced with polyster m and l for40mm thick brick tiles bedded laid on 15mm thick cementmortar 1 6 and joints grouted flush in cement mortar 1 3 treating the bottom and sides of excavation at the rate of 5litres of emulsion per square metre of surface area treating the backfill in contact with foundation at the rate of7 5 litres of emulsion per square metre of vertical surface treating the top surface of filled earth at the rate of 5 litresof emulsion per square metre of surface m and l treatingthe soil under plinth protection at the rate of 5 litres ofemulsion per square metre of surface area applying two ormore coats of 100 premium acrylic emulsion paint having bid number gem2025b6741448 dated 29-09-2025 bid document1 112 voc less than 50 gm litre mirror polish granite of any typework 25mm thick table rubbed and polished in steps jambspillars window cills cooking platforms and like in cementmortar 1 4 i rounding to edges of stone slabs one edgesuch as in steps cooking platform and other similarsituations m and l vitrified ceramic tiles dark shadedoublecharged ultracharged 10 mm thick squarerectangular polished area of each tiles exceeding 0 42 sqm m and l for non skid joint free ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0 18 sqm but not exceeding 038 sqm in floors etc m and l for coloured joint free glazedceramic tiles in vertical surface 350x 250 x 7mm 450x350x 7mm thick set and jointed in neat cement slurry andpointed in white or colour cement to match providing andapplying plaster of paris putty of 1 mm thickness overplastered surface to prepare the surface even and smoothincl distempering with 1st quality acrylic distemper rccseptic tank designed to carry sewage and sullage waterexcavation in any type of soil pcc 1 4 8 below foundationrcc m 30 design mix in walls base slab baffle walls androof rcc np3 200 mm diameter pipes laid on 150 mmthick bed with excavation m and l for providing and fixingfactory made upvc white colour casement openable doormade of extruded profile wilh wall thickness of 2 3mm 02mm 4 80mm thick froasted glass for fixing in door supplyonly m and l for cortex tile made up of wood fiber cementcomposite 1mm width wood fiber 25mm thick covered withacoustically transparent m and l providing and fixing10mm thick plaster of paris ceiling gypsum anhydrous tocurved surface incl any sunk or raised fe 410w gde e 250quality b framed work as in doors orgates of angle or othersectionwith gusset plates rails braces etc fe 410w gde e250 quality b rolled sections as in framing for claddingglazing and the like fixed with angle cleats flats andconnecting plates etc two coat of synthetic enamel paintover a coat of red oxide surfaces of any description over10cm in width or girth not otherwise described tubesmedium grade galvanised with all fitting and fixed completeto walls and ceilings or laid in floors of 25 mm dia tubesmedium grade galvanised with all fitting and fixed completeto walls and ceilings or laid in floors of 20 mm dia tubesmedium grade galvanised with all fitting and fixed completeto walls and ceilings or laid in floors of 15 mm dia rotational moulded polyethylene water storage tanks 1000ltr capacity m and l for gun metal globe or gate valveswith iron wheel head screwed both ends for iron pipe andfixed for 25 mm bore rimless blind installation wall hungwc with uf soft close slim seat cover hinges accessoriesset size 380x520x375 mm with single piece slim concealedcistern with floor mounting frame hand shower healthfaucet abs body with 8mm dia 1 meter long spirochromeflex tube and wall hook complete fixed at site fullyfunctional incl all necessary fitting and fixtures other thanmentioned table top basin of size 565x425x140 mm inclsingle lever basin mixer without popup waste system with450mm long braided hoses conealed body for singlelever diverter 40mm cartridge with button assemblybutton on top but without exposed parts single leverexposed parts kit of diverter consisting single lever wallmixer 3 in 1 system with provision for both hand showerand overhead shower complete with 115mm long bendpipe connecting legs and wall flange overhead shower140mm round shape single flow with air effect abs bodyand face plate chrome plated with rubit cleaning system bid details2 112 0 0 hand shower 140mm round shape single flow with aireffect abs body and face plate chrome plated with rubitcleaning system make jaquar cat hsh 1727, tumblerholder complete fixed at site fully functional incl allnecessary fitting and fixtures other than mentioned makejaquar cat can 1141n, towel rack 600mm long withoutlower hangers but with 3 hooks stainless steel, toilet rollholder make jaquar cat can 1151n, corner glass shelfwith bracket make jaquar cat can 1173, swivel mirrorcomplete fixed at site fully functional incl all necessaryfitting and fixtures other than mentioned make jaquar catcan 1195n, corner shower basket make jaquar cat can1175n, towel ring square make jaquar cat akp 35721p, soap dish holder make jaquar cat akp 35731p, wastecoupling 32mm size half thread with 80mm height inclwaste pipe complete fixed at site fully functional incl allnecessary fitting and fixtures other than mentioned, 600mm long braided hose with m10x1 nipple15mm nut oring and rubber washer make jaquar cat ald 801b, angular stop cock with wall flange make jaquar cat flp5053pm, 2 way bib cock with wall flange make jaquarcat flp 5041pm, versa horizontal manual geysercomplete fixed at site fully functional incl all necessaryfitting and fixtures other than mentioned make jaquar catvrm wht hd070, walk in panel framed in standarddimension glass 10mm finish black h 2000 w 1200, tubeslight grad galvanised as in sleeves, sand cast cast iron soil100 mm bore waste and vent pipes in any length with orwithout ears with cement joints laid in trenches or in floors, 100mm cast iron sanitary connection bend 92 5 with arms380 to 450mm excluding joint, 100 mm bore cast iron floortrap with grating including jointing to waste pipe fixed incement concrete type b 1 1 2 4, wrought second class hardwood in scantlings timber framed and fixed, 1 5mm thickdecorative laminate type 1 of surface finish colour andpattern as approved fixed with approved adhesive as permanufacturers, glass 5 5 mm thick supplied only, 2ndclass hard wood wrought bullnosed splayed chamfered orrounded on one edge or face secured with nails or bradsarea exc 6 but n exc 13 sqcm, 2nd class hardwood cleansawn battens at 35 cm centres area of each batten exc 15and nexc 25 sqcm, 6mm thick 5 ply veneered decorativeplywood grade 1 with bwr resin with decorative faceveneerson one faces fixed with nails to timberframe work, vista wooden flooring vintage style 12 mm thick woodenfloors ac5 rating or equivalent colour, vista woodenflooring vintage style 12 mm thick wooden floors ac5 ratingor equivalent colour and pattern as aproved, cement opc43 grade packed in hdpe bag each 50 kg wt, quick settingcompound make acclerex rapidite, natural m sand freefrom moisture and organic matter confirming to is 383 1970and is 2386 part vi, agg 20mm the size and grading ofaggregate shall be as specified in is 456 200 rev, agg40mm the size and grading of aggregate shall be asspecified in is 456 200 rev, agg 63mm the size andgrading of aggregate shall be as specified in is 456 200 rev, tmt bar 10mm, tmt bar 12mm, tmt bar 16mm, tmtbar 20mm, tmt bar 25mm, tmt bar 28mm, tmt bar32mm, brickwork with subclass b bricks straight or curvedon plan exc 6m mean radius built in cm 1 4, supply andlaying jointing and testing xlpe insulated pvc sheathedarmoured heavy duty electric cable with strandedaluminium conductor 1100 volts grade, excavation intrenches in soft loose soil n exc 1 5 mtr wide and not exc 1 5 //bid details3 / 112 m deep and getting out including forming bottom surface forlaying of pipes complete all as specified and directed, returning filling in including spreading leveling wateringand well ramming in layers not exc 25 mm thick completeall as specified and directed, removal of excavatedmaterial to a distance not exc 50 meter and depositingwhere directed at a level not exc 1 5 m above the startingpoint complete all as specified and directed, supplyinglaying sand cushioning for cable protection in trenches 8 cmdeep before laying cable and 15 cm deep over the cableincluding well punning complete all as specified anddierected, supplying laying sub class b bricks old size withaxis of the bricks perpendicular to the axis of the cable as incable protection complete all as specified and directed, supply and fixing in replacement gi tubing light grade intrenches fixed to wall ceiling including required gi fitting ofsize 40mm dia complete all as specified and directed, onelight point controlled by one switch, one fan exhaust pointcontrolled by one switch, one three pin switch socket 5amps outlet on independent board, one bell buzzer pointcontrolled by one switch, one power point with insulatedstranded copper conductor cable 4 sqmm single core andpvc insulated frls 1100 volts unsheathed copperconductor 4 sqmm stranded, s and f modular type switch 6amps one way one module complete all as specified makecrabtree anchor legrand, s and f modular type socketoutlet 6 amps 2 3 pin combined 2 module complete all asspecified make crabtree anchor legrand, s and f modulartype socket outlet 6 16 amps combined 2 module completeall as specified, s and f electric bell ding dong ac 230voltssingle pole complete all as specified and directed, s and fmodular bell push 6 amps modular type complete all asspecified, supply and fix modular fan step regulator120watt 2 module, material and labour for white cover withframe suitable for accommodating 01 nos module switchsocket etc, material and labour for white cover with framesuitable for accommodating 02 nos module switch socketetc, material and labour for white cover with frame suitablefor accommodating 03 nos module switch socket etc, material and labour for white cover with frame suitable foraccommodating 4 nos module switch socket etc, materialand labour for white cover with frame suitable foraccommodating 6 nos module switch socket etc, materialand labour for white cover with frame suitable foraccommodating 8 nos module switch socket etc, supplyand fixing pvc body fresh air fan with pvc blades isi marked225 mm sweep with louvers and connecting up includingprovision of three core flexible copper wire of size 1 5 sqmm, m and l submain wiring with two run single core 6 sqmmfrls copper conductor cable pvc insulated unsheathed1100 volts grade in and including pvc conduit, s and f insub main wiring with two runs of 4 sqmm single core pvcinsulated frls cable 1100 volts, s and f factory madeepoxy powder coated distribution board mccb db tpn 4way vertical type ip 43 protection made out of min 1 6 mmthick, m and l for earthing complete with galvanised steel, supply and fix indoor metal black led ceiling lightsfixturesslim edge lit 50w full spectrum square ceilinglamps 6500k cool white, supply and fix indoor ceilingmounted aluminium led profile light ip33 18w wattagewarm white ip 33 ceiling mountedand environmentalprotection, supply and fix led batten luminaire surfacemounted 2 feet system wattage of not less than 10 wattsand not less than 1000 lm, supply and fix track light focus //bid details4 / 112 light bed side decorative type complete all as specified, supply and fix smd led panel recess surface 15 watt roundsquare type led ceiling light with extruded aluminiumhousing and milky diffuser including connecting up with twincore, supply and fix mccb 160 amps fp 415 volts 36 50 hzwith thermal, supply and fix mcb dp 32 40 amps 240 volts10 ka 50 hz b curve, supply and fix mcb sp 5 32 amps240 volts 10 ka 50 hz b curve, supply and fix 3 layer pp rp o l y p r o p y l e n e random copolymer concealed pipessdr 7 4 pn16 uv, excavation in trenches in soft loose soilnexc 1 5 mtr wide and not exc 1 5 m deep and getting outincluding forming bottom surface for laying of pipescomplete all as specified and directed, making connectionof ppr distribution branch with ppr main of sizes 16 mm to40 mm by providing and fixing tee including cutting andmaking fusion joint etc complete all as specified anddirected, supply and fix pp r gate valves brass insert isimarked of external dia 25 mm, supply and fix rnautomatic water pressure pump suitable for hot watercirculation washing machine ro and shower 15mm 1 by 2feet, supply and fix 2 hp single phase motor volt 220 50hz complete all as specified and as directed, supply and fixair cooled and hot system split unit air conditioner ofcapacity 1 tonne single phase 230 volt 50 hz ac indoor andoutdoor unit, supply and fix air cooled and hot system splitunit air conditioner of capacity 1 5 tonne single phase 230volt, supply and fix air cooled air conditioner electric drivensingle phase of capacity of 40 to 5 0tr complete all asspecified, supply and fix voltage stabilizer for automaticoperation single phase naturally air cooled indoor type anddesigned for input variation between 170 volt, s and fsingle pole and neutral sheet metal enclosure with a two pinand earth plug and socket complete with one single polemcb 25 a, sub main wiring with approved colour coding asper is with single core frls pvc insulated flexiblemultistranded copper conductor 1 1 kv grade, supply andfixing of gi duct 24 guage of size 8 inch x 8 inch h x winches 04 ducts complete all as speccified and as directed, sipply and fixing of exhaust inline fan 750 cfm fresh aircomplete all as speccified and as directed, sipply and fixingof exhaust fan 400 mm 15 inch complete all as speccifiedand as directed, sipply and fixing of canvas connectioncomplete all as speccified and as directed, sipply and fixingof diffusers 12 inch x 12 inch complete all as speccified andas directed, three phase 1 2 hp monoblock pump 430 voltcomplete with and incl 3 mtr length required size flexiblesuction pipepipe, provn of 58 5 kva diesel generating setcomplete with diesel engine alternator and amf controlpanel conforming to the specification given, xlpe cablexlpe insulated pvc sheathed heavy duty armoured multicore cable 25 sqmm 3 5 core aluminium conductor forworking voltage upto and including 1100 volts conformingto is 7098, on off changeover switch change over switchesin sheet metal enclosure 63 amp, fuel filter ctg duplextype, spin on lube oil filter, fuel filter element, main element for air cleaner, v belt cogged avx 101136, lube oil, earthing electrode prefabricated gelearthing electrode of pipe in pipe technology, gi pipe 100mm dia med grade as per is specification 1239 part i 1990isi marked length 2 mtr, back filled compound, ms earthpit cover of size 30 cm x 30 cm with handle, aluminiumstrip of size 25mm x 3mm 9 00m long, iron spikes 16 inchlong complete as directed and specified by buyer, gi stripof size 32 x 6mm 3 00m long, gi nipple 20mm dia and //bid details5 / 112 cm long is 1879, gi reducer socket 40x20mm isi marked, lightning air terminal a copper tube 150 cm long x 25 mmdia with five copper prongs of length 15cm each fixed tocopper ball, ms clamp 40x2mm with nut and bolt complete, gi wire 12 gauge conforming to is 2062 1991, earth augur, pvc pipe 3m long 6 inch dia, cement opc 43 gradepacked in hdpe bag each 50 kg, tester set meger forcarrying out serviceability check along with manual one perfive lc, gi pipe medium grade of 40mm dia 6 mtr long andone equal socket of 40mm dia welded with ms plate of size100mm x 100mm x 4mm thick with 04 nos hole of 12mmdia, natural sand, aggregate 20mm stone aggregate to becrushed rock or gravel 20mm, gi pipe 40 mm bore 2m longas per is 1239, 50 mm bore gi pipes sleeve, crystalinecondcutive mixture ccm, supply of control desk forprovision of 06 monitors and 06 operators made in xlat xesystem, supply of control desk for provision of 04 monitorsand 04 operators made in xlat xe system, supply ofcontrol desk made in xlat xe system, supply of managertable, supply of printer table, supply of 2 seater sofa, supply of corner table, supply of center table, supply ofchair

State Government

TRN :35487728 | 21 Oct, 2025

Tender Value : 2.53 Lacs

Surendranagar - Gujarat

Tender for gem bids for repair, maintenance, and installation of plant/systems/equipments version 2 - surendranagar pumpingstation; work of testing, examination, inspection andcertification for lifting machines chain pulley blocks, liftingtackles, pressure hydro test .

Central Government/Public Sector

TRN :35456600 | 04 Oct, 2025

Tender Value : 0

Jaisalmer - Rajasthan

Tender for gem bids for annual maintenance service - desktops, laptops andperipherals - desktop pc; hp, acer, dell, wipro, annualmaintenance service - desktops, laptops and peripherals -ups online 6 kva; uniline, zebronix, annual maintenanceservice - desktops, laptops and peripherals - monocrome, laserjet, colour printer, injet printer, multifuction printer;brother, hp, samsung, canon, richo, annual maintenanceservice - photocopier machine - photocopier machine;canon; any service provider /

Central Government/Public Sector

TRN :35463105 | 15 Oct, 2025

Tender Value : 23.69 Lacs

Nagpur - Maharashtra

Tender for gem bids for custom bid for services - cleaning and desilting of gully trap chamber as per item 1 of schedule of quantities , custom bid for services - cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer as per item 2 of schedule of quantities , custom bid for services - providing services of belder cum sewer man equipped with necessary t&p as per item 3 of schedule of quantities , custom bid for services - cleaning and removal of dirt soiled material of storm water drains manually as per item 4 of schedule of quantities , custom bid for services - lifting of chamber cover and cleaning and desilting and removal of sludge silt brick bat debris of sewerage chamber and etp chamber as per item 5 of schedule of quantities , custom bid for services - earth work in excavation by mechanical means hydraulic excavator or manual means as per item 6 of schedule of quantities , custom bid for services - providing and laying in position cement concrete of specified grade including the cost of centering and shuttering as per item 7 of schedule of quantities , custom bid for services - providing and fixing on wall face unplasticised rigid pvc rain water pipes as per item 8 of schedule of quantities , custom bid for services - providing and fixing on wall face unplasticised pvc moulded fittings accessories as per item 9 of schedule of quantities , custom bid for services - providing and fixing on wall face unplasticised rigid pvc rain water pipes as per item 10 of schedule of quantities , custom bid for services - providing and fixing square mouth sw gully trap class as per item 11 of schedule of quantities , custom bid for services - providing and fixing square mouth sw gully trap class as per item 12 of schedule of quantities , custom bid for services - providing and laying non pressure np2 class rcc pipes as per item 13 of schedule of quantities , custom bid for services - making connection of drain or sewer line with existing manhole including breaking into and making good the walls as per item 14 of schedule of quantities , custom bid for services - constructing brick masonry chamber for underground ci inspection chamber and bends with bricks in cement mortar as per item 15 of schedule of quantities , custom bid for services - constructing brick masonry chamber for underground c i inspection chamber and bends with bricks as per item 16 of schedule of quantities , custom bid for services - providing fixing and laying of hdpe underground pipe line of 100 mm to 150 mm dia join may be done as per item 17 of schedule of quantities , custom bid for services - repair of existing hdpe underground pipe line of 100 mm to 150 mm dia with electro fusion machine as per item 18 of schedule of quantities , custom bid for services - repair of existing ppr underground pipe line of 100 mm to 150 mm dia with ppr jointing machine as per item 19 of schedule of quantities , custom bid for services - repair of existing ductile iron di underground pipe line of 100 mm to 150 mm dia with proper jointing machine as per item 20 of schedule of quantities

State Government

TRN :35464774 | 10 Oct, 2025

Tender Value : 0

Araria - Bihar

Tender for gem bids for volleyball refree stand, volleyball mat terraflex, kabaddimat, hand ball goal post iron, waight plates rack iron, weight lifting plat, whushu mat sanda mat, kho kho matterraflex, kho kho pole ditacheble, chess table, chessclock electronic, taflon adhesive tape, mat for yoga room, mat for weight lifting hall heavey linolium, mat for storeroom heavey linolium mat, steper exerciser cliclibexcerciser, sit ups bench, vibrator machine, gym ropeiron for repairing use, volleyball net vinex, volleyball ballcosco super volley, volleyball net antina 3 set fipur, volleyball electronic score board table mounted, basketballball match ball, badminton match net, badminton ma ttaraflex, badminton rocket corbon shaft, shuttle corkplastic match quality, weight lifting set 185 kg nelco proolympic set, olympic weight rod 7 feet, olympic weightrod 5 feet, olympic weight plates nelco pro, wrestilingmat 75 mm, table tenis board match board, table tenisbat match, table tenis ball, table tenis net with clip, chess board rollon board with plastic stags, heavy dutytreadmill 3 hp electronic, measuring tape fabric freemanbrand 50mtr fabric 2 nos 30mtr fabric 2 nos 15mtr fabric 2nos 5mtr fabric 2 nos, volleyball pole adjustable metal pole, volleyball net standard, volleyball ball super volley, table tenis board match 5000 dx, table tenis bat doublelayer, carrom board match, chess board rollon board withstag, tread mill electronic, cycle excerciser, yoga mats, twister excerciser, 7 station maltigym, bench press bench

Central Government/Public Sector

TRN :35420342 | 16 Oct, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for rammodel oem specified dualchannel ddr 41866oc13331066 mhz 8 gb hard disk interfacesata 6gbscache 8mbcapacity 1tbarea densityavgaverage latency 416msrandom read seek time85ms mouse with mouse padusb mouse optical withmouse pad keyboardkeyboard usb keyboard 104keyscomfortable as per technical specification motherboard motherboard with following config intel corei7i5i3processor supported microatx form factors 1066800533 mhz system bus processorintel processorcore i7 307 ghz 4 mb lga1156 1333 or higher confic speaker 51 inspire inspire 5 1 approx speaker power25w rms per channel 4channel sub woofer power 17wrms as per technical specification cabinet mini towercabinet with 450w500w smps iball length40cms as pertechnical specification smpsmodel oem certifiedcoolermastercorsair etc 720 watt or more ups 1 kva1000va line interactive upsoutput power capacity 600watts 1000 vamax configurable power 600 watts asper technical specification lan card specificationsstandards ieee 8023 10baseas per technical specification 23 inch led monitor non touch23 inch led monitornon touch graphics accelerator card nvidianvidiageforce gtx 9800 graphics as per technical specification dvd rw drive os windows 81 professional hdmito hdmi cable 6 mtr for 5inch lcd monitor 5inch lcdmonitor lan cabling 10 mtr rotary encoder rotaryencoder jencoderj775sl ppr1000 micro switch buttontype round type contact rating 6 amp micro switch longleaf single pole double throw with leafstock no 1594590contact rating 6amp 250v acmechanical life15x10000000 operation stm 32 hs microcontrollerscortex m33 cores 250 mhz 128 kbytes to 2mb of flash bid number gem2025b6651747 dated 16-09-2025 0 0 bid document1 124 0 0 2 2 memory and uptp 640 kbytes of ram or eqvt, electronicguidance unit , relay pcb , 37 pin circular connectormale , 37 pin circular connector female , push buttonswitches , dpdt toggle switch , dpdt momentary 3 wayswitch on off stdby , sunshade fiber glass , 13 pincircular connector male , 13 pin circular connectorfemale , audio cable 10mtr , usb cable 05mtr male tofemale , power spike 5 15 amp 07 socket with safetyfuse , encoder controller board , 13 pin circularconnector socket and pin , pj 16 pvc gland , wago mcs 3pin male female connector , wago mcs 4 pin male femaleconnector , relimate 20pin and 14 pin connector , molexconnector 4 pin , power connector 250v 10amale female , 3 pin 15a plug anchor , meanwhile smps ac input 230v dc output 12v 28 a , relay12v 20 30a , microswitch 5 amp 250v , momentaryswitches 1020x 1620x calonix , 12v 20a solenoid , led with circuit board fire tube , smps holder gvs , magnetic reed switch , rotary switch three position , hall sensor with pcb and magnets , hdmi 5mtr cable haze , hdmi 3 mtr haze , power cables three core1 5mm , teflon cables 10mtr orange black white , spring wire steel 2 mtr , dp to hdmi converter haze , eye piece rubber , sleeve 1mm , sleeve 2mm , sleeve18 mm , aux cable 5 mtr , fire tube rear glass , clockand humidity sensor htc 1 , fire extinguisher life securedry chemical powder 2kg , gen set ep 1000 honda , clamp for elevation encoder as per drg hled in 515 atgmsec, instructor station as per drg hled in 515 atgm sec, aluminum frame with abs sheet with 2 5mm as per drghled in 515 atgm sec, isa frame 25x25x3 as per drg hledin 515 atgm sec, front sheet as per drg hled in515 atgm sec, left and right sheet as per drg hled in515 atgm sec, top partion sheet as per drg hled in515 atgm sec, tray as per drg hled in 515 atgm sec, top sheet as per drg hled in 515 atgm sec, base plate6mm thk as per drg hled in 515 atgm sec, solenoid valveholding sheet 1 as per drg hled in 515 atgm sec, m3csk screws as per drg hled in 515 atgm sec, magnetbase plate 50x18x5mm thk as per drg hled in 515 atgmsec, cradel left 440x44 7x7thk as per drg hled in515 atgm sec, cradel right 440x44 57x7mm as per drghled in 515 atgm sec, cylinder 1 dia17x2thk x66lg asper drg hled in 515 atgm sec, cylinder 2 dia20x2thk x66lg as per drg hled in 515 atgm sec, bush dia32xidx3thk as per drg hled in 515 atgm sec, slider 3 as per drg hled in 515 atgm sec, 1 2 flat80x66x1 2thk m s flat as per drg hled in 515 atgmsec, spring part 280x62x28thk as per drg hled in515 atgm sec, cylinder rod dia19x142 5lg as per drghled in 515 atgm sec, cradel welded part34x32x15thk as per drg hled in 515 atgm sec, slottednut m10 as per drg hled in 515 atgm sec, cradel frameleft470x16x9thk as per drg hled in 515 atgm sec, cradel frame right 470x16x9thk as per drg hled in515 atgm sec, m16 nut as per drg hled in 515 atgm sec, m16 stud as per drg hled in 515 atgm sec, spring clamp54x18x2thk as per drg hled in 515 atgm sec, springshaft dia13x184 5lg as per drg hled in 515 atgm sec, spring bush dia13x9lg as per drg hled in 515 atgm sec, spring 1 as per drg hled in 515 atgm sec, spring 2 as perdrg hled in 515 atgm sec, bush 2 dia17x10lg as perdrg hled in 515 atgm sec, bolt as per drg hled in515 atgm sec, cylinder part 74 43x45x21thk as per drg //bid details2 / 124 hled in 515 atgm sec, cylinder extend 180x22x10thk asper drg hled in 515 atgm sec, pin as per drg hled in515 atgm sec, ti sight holder as per drg noao 515 atgm, left sheet 280x100x2thk as per drg hledin 515 atgm sec, front sheet 280x168x2thk as per drghled in 515 atgm sec, right 242x125x2thk as per drghled in 515 atgm sec, cover with body sheet280x166x2thk as per drg hled in 515 atgm sec, rearsheet 100x64x2thk as per drg hled in 515 atgm sec, bottom sheet 148x96x2thk as per drg hled in 515 atgmsec, top body sheet 255x188x2thk as per drg hled in515 atgm sec, top sheet 195x188x2thk as per drg hledin 515 atgm sec, cover with body 282x168 as per drghled in 515 atgm sec, push buttons as per drg hled in515 atgm sec, csk screws m3x15mm lg as per drg hledin 515 atgm sec, csk screws m3x25mm lg as per drghled in 515 atgm sec, csk screws m2x10mm lg as perdrg hled in 515 atgm sec, allenkey bolts and nutsm6x15mm lg for handle as per drg hled in 515 atgmsec, ti sight clamp holder as per drg hled in 515 atgmsec, day sight as per drg hled in 515 atgm sec, daysight clamp holder as per drg hled in 515 atgm sec, daysight holder with shaft as per drg hled in 515 atgm sec, electronic cover unit elevation encoder casing optics asper drg hled in 515 atgm sec, eye piece 02 lenses and 01mount as per drg hled in 515 atgm sec, reducer 02lenses and 01 mount as per drg hled in 515 atgm sec, right angle prism 30mm 02 nos as per drg hled in515 atgm sec, trigger spare springs as per drg hled in515 atgm sec qty 07, trigger block as per drg hled in515 atgm sec, trigger cup as per drg hled in 515 atgmsec, lever cover as per drg hled in 515 atgm sec, cocking handle as per drg hled in 515 atgm sec, solenoidwith 12v dc and 20 amps as per drg hled in 515 atgm sec, screw driver set, spanner tubular 17 inch, allen key set0 5to 10mm, cutting plier, nose plier, user hand book, technical mannual, log book, table computer 2x3 5feet wooden instructor table, kent chair rotation chairwith backrest and arm rest with wheel assy , dvd, sleeve1 5mm, wiring harness, soldering soft 500g roll, plasticties 200mm, plastic ties base 200mm, insulation tape 10mtr, bubble sheet 5 mtr, hassian cloth 5 mtr width, packing tapram model : oem specified, dual-channel ddr 41866o.c/1333/1066 mhz 8 gb, hard disk interface sata6gb/s, cache 8mb, capacity 1tb, area density avg329gb/in2, guaranteed sectors 488, 397, 168, spin speedrpm 7, 200 rpm or higher confic average latency4.16ms, random read seek time <8.5ms, random write seektime <9.5ms.- segate., mouse with mouse pad usb mouseoptical with mouse pad, keyboard keyboard usb keyboard104 keys, comfortable, quiet typing, spill-resistantdesign, durable keys, sturdy, adjustable tilt legs, plug-and-play lenght -45cms, width -15cms, mother board motherboard with following config: - - intel corei7, i5, i3processor supported. - microatx form factors -1066/800/533 mhz system bus * support for ddr3 1333/1066 mhz dimms * support for up to 16 gb of systemmemory, 8-channel 5.1+ 2 independent multi-streamingaudio subsystem with three analog audio outputs using therealtek alc888s* audio codec, * up to twelve usb 2.0 ports* six serial ata 3.0 gb/s ports, with two ports compatiblewith esata dongles * one serial port header * one parallelport header * one back panel ps/2 connector * one pciexpress* 2.0 x 16 bus add-in card connector * two pci //bid details3 / 124 express 2.0 x 1 connectors * three pci slots . ps/2 portsupports key board and mouse- with on board / externalcommunincation port com port for rs-232communication/or higher confic, processor intel processorcore i7 3.07 ghz /4 mb / lga1156 / 1333 or higher confic, speaker 5.1 inspire inspire 5 :1. approx - speaker power:25w rms per channel 4channel. sub woofer power 17wrms. frequency response: 40 hz ~ 20 khz, s/n ration :80db, distortion :1 %, satelite speaker:lxwxh7cmx8cmx18.3cm. sub woofer:19cmx19cmx19cm. wiredremote control :2cmx6cmx3cm. power 12v ac 2.9ampadopter.volume control with on/off switch.audio cable fromcomputer to sub woofer. extended audio cable moldedone end male connector and other end female connector 15mtrs-qty 4 and all standard accessories to be provided., cabinet mini tower cabinet with 450w/500w smps iballlength-40cms, height 37 cms smps should have 24 pinconnector and sata power connectors, smps model : oemcertified coolermaster/corsair etc; 720 watt or more, ups1 kva 1000va line interactive ups output power capacity600 watts / 1000 va, max configurable power 600 watts /1000 va, nominal output voltage 230v, output connections2/3-pin 6a surge protection 2/3-pin 6a battery backup, input nominal input voltage 230v, input frequency 47 - 63hz, input connections bs 546a, cord length 1.98meters, input voltage range for main operations 175 -295v, input voltage adjustable range for mains operation, power outlet : 4x battery backup & 1x surge, on batteryoutlet voltage : 230v 8%, frequency range :50/60hz 5%, automatic voltage regulation avr :increase on linevoltage by 12%, reducecs on line voltage by11%., adjustable sensitivity and transfer voltage : low, medium and high, typical recharge time : 8 hrs, powerchutepersonal edition v2.0 for windows 2000 & xp multilanguage support, lan card specifications standards ieee 802.3 10base-t ethernet, ieee 802.3u 100base-txfast ethernet, ansi/ieee 802.3 nway auto-negotiation, ieee 802.3x full duplex flow control support network datatransfer rate, ethernet: 200mbps full-duplex, featuresdimensions item wxdxh: 4.9 x 4.8 x 0.5 packagingwxdxh: 9.3 x 9.7 x 1.5, 23 led monitor nontouch 23 led monitor non touch, graphics acceleratorcard nvidia nvidia geforce gtx 9800 graphics acceleratorcard 4 gb ram, 16x pci express/morphics ver 9.0, supportdual link dvi 2560x1600 resolution display outs puts, anddual link hdcp capable, open gl 2.1 support, pci express 2.0support or higher configaration, dvd r/w drive , oswindows 8.1 - professional , hdmi to hdmi cable 6 mtr for5 lcd monitor , 5lcd monitor , lan cabling 10 mtr , rotary encoder rotary encoder jencoder-j775-sl ppr-1000, micro switch button type round type contact rating 6amp, micro switch long leaf single pole double throw withleaf.stock no: 159-4590 contact rating: 6amp 250vac.mechanical life : >1.5x10000000 operation, stm 32 hsmicrocontrollers cortex m33 cores, 250 mhz, 128 kbytes to2mb of flash memory and uptp 640 kbytes of ram or eqvt, electronic guidance unit , relay pcb , 37 pin circularconnector male , 37 pin circular connector female , pushbutton switches , dpdt toggle switch , dpdt momentary3-way switch on/off/ stdby , sunshade fiber glass , 13pin circular connector male , 13 pin circular connectorfemale , audio cable 10mtr , usb cable 05mtr male tofemale , power spike5/15 amp 07 socket with safetyfuse , encoder controller board, 13 pin circular connector //bid details4 / 124

Central Government/Public Sector

TRN :35427502 | 11 Oct, 2025

Tender Value : 0

Angul - Orissa

Tender for gem bids for gear lubricants, multipurpose ?extreme?pressure?gear?oil? v3 conforming to is 1118 q3, antiwear hydraulicoil heavy duty v4 as per is 10522 q2, antiwearhydraulic oil v3 as per is 11656 q2 * * % % 2 32 3 /mse exemption for years of experienceand turnoveryes | complete& % & % * * % % 2 2 / startup exemption for years ofexperience and turnoveryes | complete 6 6 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, oem annual turnover, additional doc 1requested in atc, additional doc 2 requested inatc, additional doc 3 requested in atc, additional doc 4requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer8 8 : : ; ; < < & : & : : : < < ? ?? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in a /bid number: gem/2025/b/6694140< /dated: 20-09-2025 & & / bid document1 / 35 & & j j a a / minimum number ofbids required to disable automatic bidextension3< :< : a a, , m m -- / / number of days for which bidwould be auto--extended7 8 8 < < < < / /number of auto extension count1 p %p % <6 <6 < < /bid to ra enabledno6 6 r r /itc available tobuyeryes 2 2 /type of bidtwo packet bid2 2 t t /primary product categorygear lubricants, multipurpose ?extreme?pressure?gear?oil? v3 conforming to is 1118 u u & w & w /time allowed for technicalclarifications during technical evaluation7 days x x j j y y x x 2 2 / % % : : ; ; /inspection required byempanelled inspection authority / agenciespre-registered with gemno u u y y /evaluation methoditem wise evaluation/ & & /arbitration clauseno /mediation clauseno //bid details /emd detail ? /advisory bankstate bank of indiaschedule 1 /emd amount in inr9282schedule 2 /emd amount in inr7940schedule 3 /emd amount in inr15939schedule 4 /emd amount in inr8schedule 5 /emd amount in inr7490 /epbg detail ? /advisory bankstate bank of india2 / 35 2 %/epbg percentage%5.00 j /duration of epbgrequired months.3a. ^ % & 2& % & % 2 ? p : /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. the emd amount will be applicable for each schedule/group selected during bid creation.c. , , ` x < / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. ` ` /beneficiary : mahanadi coalfields limited, hingula areaname of bank: state bank of india, bank branch name: hingula area, mahendrapur bank account no.:11094460922 beneficiary bank branch ifsc: sbin0012068 beneficiary address: mahanadi coalfieldslimited, hingula area, balaram township, po- nehru satabdi nagar, bharatpur, dist-angul, odisha, 759148mahanadi coalfields limited, hingula area /splitting < / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall beexempted from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking exemption from experience criteria, shall upload the supportingdocuments to prove his eligibility for exemption.2. if the bidder is a micro or small enterprise mse as per latest orders issued by ministry of msme, the biddershall be exempted from the eligibility criteria of bidder turnover as defined above subject to meeting of qualityand technical specifications. if the bidder itself is mse oem of the offered products, it would be exempted fromthe oem average turnover criteria also subject to meeting of quality and technical specifications. the bidderseeking exemption from turnover, shall upload the supporting documents to prove his eligibility for exemption.3. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking exemption from experience criteria, shall upload the supporting documents to prove his eligibility for3 / 35 exemption.4. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofbidder turnover as defined above subject to their meeting of quality and technical specifications. if the bidderis dpiit registered oem of the offered products, it would be exempted from the oem average turnover criteriaalso subject to meeting of quality and technical specifications. the bidder seeking exemption from turnover shallupload the supporting documents to prove his eligibility for exemption. 5. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 6. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 7. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. if the buyer has mentioned mse purchase preference in atc then service provider is required to uploadnecessary documents for mse purchase preference for verification by the buyer during evaluation. u u u u / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under: u / evaluationschedules & / / item/category /quantityschedule 1gear lubricants, multipurpose ?extreme?pressure?gear?oil?v3 conforming to is 11183570schedule 2antiwear hydraulic oil heavy duty v4 as per is 1052237804 / 35 schedule 3gear lubricants, multipurpose ?extreme?pressure?gear?oil?v3 conforming to is 11186300schedule 4gear lubricants, multipurpose ?extreme?pressure?gear?oil?v3 conforming to is 1118210schedule 5antiwear hydraulic oil v3 as per is 116563570gear lubricants, multipurpose ?extreme?pressure?gear?oil? v3 conforming to is1118 3570 containers 6 6 1 2 & & % % % % a a % % 2 32 3 j j /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname j j u u /bid requirementallowed valuesgeneralrequirementstypes of gear lubricants, multipurpose ?extreme?pressure?gear?oil?ep type api gl-5viscosity gradesae 140packing and markingpacking size210lothersagree to provide all relevantdocuments, testreport/supporting document /reports etc to the buyer at thetime of bidding or on demandduring supplyyesadditional specification parameters - gear lubricants, multipurpose ?extreme?pressure?gear?oil?v3 conforming to is 1118 3570 containers specification parameternamebid requirement allowed valuesadditional specificationparametersconfirming to is 1118additional specificationparameters1recommendation/approval of oem m/s. beml is required as lubricant is to beused in equipment under warranty/guarantee/contract.* bidders offering must also comply with the additional specification parameters mentioned above. 6 < 6 < p %p % 2 2 /input tax credititc and reverse chargercm details 6 < 6 < /itc on gst 6 < 6 < /itc on gst cess100%na5 / 35 //p < c p < c /consignees/reporting officer and quantity6. .6. ./s.no. //p < c p < c /consigneereporting/officer /address /quantity< < < < /deliverydays1premkumar p759103, office of the depotofficer, regional stores, hingula area, at/p.o/p.s gopal prasad357030antiwear hydraulic oil heavy duty v4 as per is 10522 3780 liter 6 6 1 2 & & % % % % a a % % 2 32 3 j j /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname j j u u /bid requirementallowed valuesstandards &certificationgoverning standardconformity to is 10522generalrequirementsviscosity grades ofantiwear hydraulic oilvg 68requirements for antiwearhydraulic oilas per clause 3 and table 1 of is 10522packing and markingpacking size in liter210 ladditional specification parameters - antiwear hydraulic oil heavy duty v4 as per is 10522 3780liter specification parameternamebid requirement allowed valuesadditional specificationparameterstest reports: needs to submitted at the time of bidding or during supply.additional specificationparameters1recommendation/approval of oem m/s. beml is required as lubricant is to beused in equipment under warranty/guarantee/contract.* bidders offering must also comply with the additional specification parameters mentioned above. 6 < 6 < p %p % 2 2 /input tax credititc and reverse chargercm details 6 < 6 < /itc on gst 6 < 6 < /itc on gst cess100%na6 / 35 //p < c p < c /consignees/reporting officer and quantity6. .6. ./s.no. //p < c p < c /consigneereporting/officer /address /quantity< < < < /deliverydays1premkumar p759103, office of the depotofficer, regional stores, hingula area, at/p.o/p.s gopal prasad378030gear lubricants, multipurpose ?extreme?pressure?gear?oil? v3 conforming to is1118 6300 containers 6 6 1 2 & & % % % % a a % % 2 32 3 j j /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname j j u u /bid requirementallowed valuesgeneralrequirementstypes of gear lubricants, multipurpose ?extreme?pressure?gear?oil?ep type api gl-5viscosity gradesae 90packing and markingpacking size1l, 5l, 25l, 210lothersagree to provide all relevantdocuments, testreport/supporting document /reports etc to the buyer at thetime of bidding or on demandduring supplyyesadditional specification parameters - gear lubricants, multipurpose ?extreme?pressure?gear?oil?v3 conforming to is 1118 6300 containers specification parameternamebid requirement allowed valuesadditional specificationparametersconfirming to is 1118, test report: needs to submitted at the time ofbidding or during supply.additional specificationparameters1recommendation/approval of oem m/s. beml is required as lubricant is to beused in equipment under warranty/guarantee/contract.* bidders offering must also comply with the additional specification parameters mentioned above. 6 < 6 < p %p % 2 2 /input tax credititc and reverse chargercm details7 / 35 6 < 6 < /itc on gst 6 < 6 < /itc on gst cess100%na //p < c p < c /consignees/reporting officer and quantity6. .6. ./s.no. //p < c p < c /consigneereporting/officer /address /quantity< < < < /deliverydays1premkumar p759103, office of the depotofficer, regional stores, hingula area, at/p.o/p.s gopal prasad630030gear lubricants, multipurpose ?extreme?pressure?gear?oil? v3 conforming to is1118 210 containers 6 6 1 2 & & % % % % a a % % 2 32 3 j j /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname j j u u /bid requirementallowed valuesgeneralrequirementstypes of gear lubricants, multipurpose ?extreme?pressure?gear?oil?ep type api gl-5viscosity gradesae 85w-140packing and markingpacking size210lothersagree to provide all relevantdocuments, testreport/supporting document /reports etc to the buyer at thetime of bidding or on demandduring supplyyesadditional specification parameters - gear lubricants, multipurpose ?extreme?pressure?gear?oil?v3 conforming to is 1118 210 containers specification parameternamebid requirement allowed valuesadditional specificationparametersconfirming to is1118* bidders offering must also comply with the additional specification parameters mentioned above. 8 / 35 6 < 6 < p %p % 2 2 /input tax credititc and reverse chargercm details 6 < 6 < /itc on gst 6 < 6 < /itc on gst cess100%na //p < c p < c /consignees/reporting officer and quantity6. .6. ./s.no. //p < c p < c /consigneereporting/officer /address /quantity< < < < /deliverydays1premkumar p759103, office of the depotofficer, regional stores, hingula area, at/p.o/p.s gopal prasad21030antiwear hydraulic oil v3 as per is 11656 3570 liter 6 6 1 2 & & % % % % a a % % 2 32 3 j j /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname j j u u /bid requirementallowed valuesstandards &certificationgoverning standardconformity to is 11656generalrequirementsviscosity grades ofantiwear hydraulic oilvg 46requirements for antiwearhydraulic oilas per clause 3 and table 1 of is 11656packing and markingpacking size in liter210 ladditional specification parameters - antiwear hydraulic oil v3 as per is 11656 3570 liter specification parameternamebid requirement allowed valuesadditional specificationparametershigh viviscosity indexsae-46, test report: need to submitted at the timeof bidding or during supply, additional specificationparameters1recommendation/approval of oem m/s. tata hitachi is required as lubricantis to be used in equipment under warranty/guarantee/contract.* bidders offering must also comply with the additional specification parameters mentioned above. 9 / 35 6 < 6 < p %p % 2 2 /input tax credititc and reverse chargercm details 6 < 6 < /itc on gst 6 < 6 < /itc on gst cess100%na //p < c p < c /consignees/reporting officer and quantity6. .6. ./s.no. //p < c p < c /consigneereporting/officer /address /quantity< < < < /deliverydays1premkumar p759103, office of the depotofficer, regional stores, hingula area, at/p.o/p.s gopal prasad357030special terms and conditions-version:1 effective from 02-01-2025 for category gear lubricants, multipurpose ?extreme?pressure?gear?oil? v3 conforming to is 11181. isi markstc: the product may also carry an isi mark/standard mark as per the bis standard governingthis category. as such buyers may also opt for isi marked product while creating bid. in such cases buyershall verify valid bis license for the same at the time of evaluation of bid and check isi marking at thetime of receipt of material before issuing crac. eco mark stc:eco mark is applicable as per g.s.r. 85e dated 21st february 1991 annexure - i for thiscategory. as such buyers may also opt for eco mark labelled product while creating bid. in such casesbuyer shall verify eco mark label at the time of evaluation of bid/receipt of material before issuing crac.special terms and conditions-version:1 effective from 02-01-2025 for category antiwear hydraulicoil v3 as per is 116561. isi markstc: the product may also carry an isi mark/standard mark as per the bis standard governingthis category. as such buyers may also opt for isi marked product while creating bid. in such cases buyershall verify valid bis license for the same at the time of evaluation of bid and check isi marking at thetime of receipt of material before issuing crac. eco mark stc:eco mark is applicable as per g.s.r. 85e dated 21st february 1991 annexure - i for thiscategory. as such buyers may also opt for eco mark labelled product while creating bid. in such casesbuyer shall verify eco mark label at the time of evaluation of bid/receipt of material before issuing crac.6 6 ; ; f f/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the original10 / 35 delivery period while exercising the option clause. bidders must comply with these terms.2. scope of supplyscope of supply bid price to include all cost components : only supply of goods3. buyer added bid specific atcbuyer added text based atc clausesadditional terms & conditions:1. qualification criteria: the bidder should be either of the following:a manufacturer of the tendered itemsorb indian selling agent authorized by the manufacturer of the tendered items, if the manufacturer does not quote directly as a matter of policy, 2. provenness criteria: any one of the following conditions should be satis ed for provenness:i. the tendered items must have been supplied during the last 5 years from the date of tender opening against orders to any government/public sector undertakings indigenous or global or any private industry.andeither, having satisfactory performance report from the user for a period of not less than 01 one yearorthe bidder will be required to furnish a self-certi cate to the following extent, along with proof of payment against the purchase orders/ rate contracts: the items covered in the purchase orders/ rate contracts copies enclosed with our o er have been fully executed and have performed satisfactorily as per the provisions of respective purchase orders/ rate contracts and all the complaints/ claim s lodged by the purchaser, if any, have been attended to and no complaints/ claimss are pending.orii. the bidder should be a startup or micro & small enterprise mses for the tendered items to be offered by them.the documentss/certificates of the bidders for bis/isi marking, iso certification towards quality management and dgms approval for any relaxation should be valid as on date of tender opening and a copy of such document/certi catevalid as on date of supply duly notarized, must accompany their billss.3. inspection: - final inspection of materials shall be carried out at the consignee s end by the authorized representative of sta o cer, hingula area at area level before acceptance of materials.11 / 35 .. warranty:4.1. the supplier warrants that the goods supplied under the contract are new, unused, of the most recent or current models and that they incorporate all recent improvements in design and materials unless provided otherwise in the contract. the supplier further warrants that all goods supplied under this contract shall have no defect arising from design, materials or workmanship or from any act or omission of the supplier that may develop under normal use of the supplied goods in the conditions prevailing in the purchasers country.4.2. the supplier shall furnish guarantee/warranty certi cate along with the billfor satisfactory performance of the ordered materials for a period eighteen 18 months from the date of receipt and acceptance of material at consignees end or twelve 12 months from the date of its use/fitment/commissioning, whichever is earlier.4.3. the purchaser shall promptly notify the supplier in writing of any claims arising under this warranty. the supplier shall, within thirty days, repair or replacethe defective goods or parts thereof, free of cost at the ultimate destination. the supplier shall take over the replaced parts/goods at the time of their replacement. no claim whatsoever shall lie on the purchaser for the replaced parts/goods thereafter.5. price certificate: in the event of placement of supply order on the lowest tenderer they shall have to submit a price certificate in all their invoices in the following format: it is certi ed that the prices charged by us for the ordered items are thelowest prices applicable to any other person/organization, private co., government department, undertaking of central/state government 6.compliance with integrated management systems manual of mcl: product / product delivery should comply with, ensuring the quality of service, protection of the environment and health & safety during and after their activities, as per company / govt. norms7. banned or delisted or debarred or put on holiday suppliers:the manufacturer as well as the bidder if bidder is not the manufacturer will give a declaration that they have not been banned or de-listed or debarred or put on holiday by any government or quasi-government agencies or psus. if a bidder and/or manufacturer has been banned or delisted or debarred or put on holiday by any government or quasi government agencies or psu, this fact must be clearly stated and it may not necessarily be a cause for disqualifying them.however, if the manufacturer/bidder is banned or delisted or debarred or put on holiday by doe/moc/mcl / cil, the offer shall be not be considered for furtherevaluation.in case of indian agents of the local suppliers quoting against the tender, both the indian agent and their principals should submit the above declaration as performat given at annexure -g .12 / 35 . security deposit: the successful tenderers will have to submit security deposit for the 5 % value of the total landed value of the contract including all taxes, duties and other costs and charges, without considering input tax credit. the security deposit shall be in the form of a bank demand draft or in the form ofa bank guarantee in the prescribed format from a rbi scheduled bank in purchasers country on a non-judicial stamp paper within 15 days from date of noti cation of award or placement of order. the security deposit shall be in the same currencyies in which contract is to be signed/ issued. in case of multi-currency contract, separate security deposit bank guarantee sdbg in respective currency for required value as above shall be submitted. if the successful tendererfails to deposit the security deposit within 15 fteen days from date of noti cation of award/ placement of order, another opportunity may be given to them for submission of security deposit within next 15 days. lf the successful tenderer still fails to deposit the security deposit within the extended period but executes the supplies within the extended security deposit submission period, the submission of security deposit may be waived, as the purpose of submission of sd is fulfilled.in cases where the successful tenderer did not submit the security deposit evenwithin the extended period for sd submission but has supplied the materials either in full or in part after the extended period for sd submission, the sd may be deducted from the rst bill or in case of insu cient amount from subsequent bills of the supplier till the full sd amount is deducted. further, a penalty equivalent to 0.5% half percent of sd amount for delay of each week or part there of period of delay is to be calculated from the 31st day from the date of noti cation of award/placement of order to the date of receipt of full sd/deduction of full sd shall be levied subject to a maximum of 3% of the contract value. security deposit will be released with the approval of hod of mm department/ area gm within 30 days after completion of supplies and acceptance of material by the consignee. all central/state government organization/psus shall be exempted from submission of security deposit. oem/oes shall also be exempted from submission of security deposit in case of procurement of spare parts forequipment against single tender enquiry/open/ limited tenders. submission ofsecurity deposit is exempted for the contracts having value up to rs.2 lakhs. the sdbg will be submitted through structured financial management system sfms. gst shall be applicable on security deposit forfeiture and will be extra and recovered from suppliers/bidders.9.performance guarantee: the successful bidder shall be required to furnish a performance guarantee equivalent to 10% value of the total landed value of the contract including all taxes, duties and other costs and charges, without considering input tax credit. the performance guarantee shall be in the form of a bank demand draft or in the form of a bank guarantee in the prescribed formatthe pbg will be submitted through structured financial management system sfms.a. the performance guarantee shall remain valid till 3 months after the completion of warranty period.b. the performance guarantee shall be submitted su ciently in advance say3-4weeks to enable its veri cation from the issuing bank, before submission of the invoice for payment of the particular goods/equipments.13 / 35 c. the release of the performance guarantees after above indicated period, shall be subject to satisfactory performance of the equipment/ items during the warranty period and ful lment of contractual obligations failing which, action for further extension or encashment of pbg, as deemed suitable shall be taken. the performance bank guarantee shall be released after expiry of validity period if no claim is pending, with the approval of the concerned cms, i/c., ch area. d. in cases where the supplier does not submit the performance guarantee in time or as per the prescribed format in line with the contract stipulations, the performance guarantee amount may be deducted from the rst bill or in case of insu cient amount, from subsequent bills of the supplier till the full performance guarantee amount is deducted. this amount shall be refunded to the supplier upon acceptance of performance guarantee submitted by them. e. gst shall be applicable on performance guarantee forfeiture and will be extra and recovered from suppliers/bidders.performance bank guarantee format................................................ name& address of the purchaser................................................ companyre: bank guarantee in respect of agreement dated ................ day of ...... 20 ............... between... . ........................ name of purchaser companyand.......................... name ofsupplier company messers............................................... a company / firm having its office at no. . . . . . . . . . . . . . . ... . . . . . . . . . . . . .. . . . . . . . . . . . . .. . . . . . .hereinafter called the contractor has entered into anagreement dated .................... hereinafter called the said agreement with ........................... name of the purchaser company hereinafter called the company to supply ................ stores/materials amounting to rs................................... on the terms and conditions contained in the said agreement.it has been agreed that ................................... ......... percent payment o f the value of the stores/materials will be made to the contractor in terms of the said agreement on the contractors furnishing to the company a bank guarantee for the sumof rs............................................................................................................................... as security for due repayment of the said sum in terms of the said agreement, and also interest as therein provided.the...................... name of the bank having its o ceat............................................... has at the request of the contractor agreed to give the guarantee as hereinafter containedwe ......................................... name of the bank herein after called thebank do hereby unconditionally agree with the company that if the contractor shall in any way fail to observe or perform the terms and condition of the said agreement regarding repayment of the said sum of rs .......................... or any of them including the term for payment of interest for delay in deliveries or shall commit any breach of its obligations there under, the bank shall on demand and without any objection or demurpay to the company the said sum of rs........................................................................................ or such portion as shall then remain unpaid with interest without requiring the company to have recourse to any 14 / 35 legal remedy that may be available to it to compel the bank to pay the same, orcalling on the company to compel such payment by the contractor.any such demand shall be conclusive as regards the liability of the contractor to the company and as regards the amount payable by the bank under this guarantee. the bank shall not be entitled to with hold, payment on the ground that the contractor has disputed its liability to pay or has disputed the quantum of the amount or that any arbitration proceeding or legal proceeding is pending between the company and the contractor regarding the claim.we, the bank- further agree that the guarantee shall come into force from the date hereof and shall remain in full force and e ect till the period that will be taken for the performance of the said agreement which is likely to be the....day of............................................................................................... but if the period of agreement is extended either pursuant to the provisions in the said agreement or by mutual agreement between the contractor and the company the bank shallrenew the period of the guarantee failing which it shall pay to the company the said sum of rs................or such lesser amount out of the said sum of r s............................................ as may be due to the company and as the company may demand. this guarantee shall remain in force until the dues of the company in respect of the said sum of rs and interest are fully satisfied and the company certifies that the agreement regarding re-payment of the said sum of rs has been fully carried out by the contractor and discharges the guarantee.the bank further agrees with the company that the company shall have the fullest liberty without the consent of the bank and without affecting in any way the obligations hereunder to vary any of the terms an d conditions of the said agreement or to extend the time for performance of the said agreement from time to time or to postpone for any time or from time to time any of the powers exercisable by the company against the contractor and to forbear to enforce any of theterms and conditions relating to the said agreement and the bank shall not be relieved from its liability by reason of such failure or extension being gran ted to the contractor or through any forbearance, act or omission on the part of the company or any indulgence by the company to the contractor or any other matteror thing whatsoever which under the law relating to sureties would but for this provisions have the effect of relieving or discharging the guarantor.the bank further agrees that in case this guarantee is required for a longer period and it is not extended by the bank beyond the period speci ed above the bank shall pay to the company the said sum of rs or such lesser sum as may then be due to the company out of the said advance of rs... and as the company may require.notwithstanding anything herein contained the liability of the bank under this guarantee is restricted to rs....... . only. the guarantee shall remain in force till the .......... day of .............. and unless the guarantee is renewed or a claim is preferred against the bank within 3 months from the said date all rights of the company under this guarantee shall cease and the bank shall be released and discharged from all liability her eunder except as provided in the preceding clause.the bank has under its constitution power to give this guarantee and ........... name of the person who has signed it on behalf of the bank has authority to do so.15 / 35 the details of beneficiary bank for sending details of bg under sfms platform is furnished below. name of the bank: - .......... .branch: - ............ .ifsc: - ............ ..a/c no: - ........... .customer id : ......... .dated this ................ day of ....................20 .. .place ........................................ . signature of the authorized person for and on behalf of the bank~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 11.the scanned copies of the following con rmatory documents shall be submitted by bidder: a qualification criteria:sl nocategory of bidderscanned copy of documents to be uploaded by all thebidders in support of basic eligibility criteriaself certified copy16 / 35 manufacturersall of below speci ed documents self certi ed1 any one of the following documents for the tendered items:a. factory license/manufacturing licenseb. nsic registration certificate.c. ssi/dic registration certificated. valid iso certificate.e. valid bis license/certificatef. valid dgms approvalg. micro / small enterprises mse registration certificate for being manufacturer for the tendered itemissued by district industries centres or khadi and village industries commission or khadi and village industries board or coir board or national small industries corporation or directorate of handicrafts and handloom or any other body speci ed by ministry of micro, small and medium enterprises2 for verification of local content class-i local supplier / class-ii local supplier, shall be required to indicate percentage of local content and provide self-certification that the item offered meets the localcontent requirement along with details of the locations at which the local value addition is made as per annexure-h17 / 35 indian selling agents authorized by manufacturerall of below specified documents self certified1 specific authorization & undertaking from manufacturer to quote against this tender as per format enclosed as annexure-b. note: the authorization should be pre-dated from tender opening date, properly signed and valid. the validity should corresponds to the delivery period stipulated in tender enquiry2 indian selling agents authorized by manufacturer is required to submit an undertaking as per format enclosed as annexure-c.3 the manufacturer/ tenderer is required to upload a certificate that no agent/ middleman/ liaisoningagent or any entity in any name other than thedisclosed authorized indian agent is involved in theprocess of procurement of goods and services annexure-d.4 any one of the following documents of the principal manufacturer for the tendered items:a factory license/manufacturing licenseb nsic registration certificate.c ssi/dic registration certificated valid iso certificate.e valid bis license/certificatef valid dgms approvalg micro / small enterprises mse registration certificate for being manufacturer for the tendered itemissued by district industries centres or khadi and village industries commission or khadi and village industries board or coir board or national small industries corporation or directorate of handicrafts and handloom or any other body specified by ministry of micro, small and medium enterprises5 for verification of local content class-i local supplier / class-ii local supplier, shall be required to indicate percentage of local content and provide self-certification from the oem that the item offered meets the local content requirement along with details of the locations at which the local value addition is made as per annexure-h.18 / 35 b provenness criteria:sl.no.alternative provenness criteriascanned copy of documents to be uploaded by the bidder in support of information declarationfurnished online by the bidder against provenness criteria as confirmatory document self certified copy the tendered item must havebeen supplied during the last 5 years from the date of tender opening to any government/public sectoru ndertakings indigenous or global or any private industry indigenous orglobal, . please note that the orders should not be older than five 05 years from the date of opening of tender. uploaded orders older than 5 years from the date of opening of tender shall be ignored.no new supply orders shall be accepted during recycling of shortfall documents. therefore bidders must be careful whileuploading supply order copies onlineandeither, having satisfactory performance report from the user for a period of not less than 01 yearor the bidder will be required to furnish a self- certificate to the following extent along with proof of payment againstthe purchaseboth the following documents a and bi or biia. complete set ofsupply orders firmcopies for the tendered item. the age of orders uploaded shall be maximum 5 five years from the date of opening of tender for the purpose of determination of provenness of the product offered by a bidder.please note that the orders should not be older than five 05 years fromthe date of opening of tender. uploaded orders older than 5 years from the date of opening of tender shall be ignored.andb. any of the following:i. satisfactory performance report from the users for a period of not lessthan 01 year from the date of fitment/commissioning.orii. the bidder will be required to furnish a self-certificate to the following extent along with proof of payment against the purchase orders/rate contracts : the items covered in the purchase orders/ rate contracts copies enclosed19 / 35 orders/ rate contracts:: the items covered in the purchase orders/ rate contracts copies enclosed with our offer have been fully executed and have performed satisfactorily as per the provisions of respective purchase orders/ rate contracts and all the complaints/ claim s lodged by the purchaser, if any, have been attended to and no complaints/ claimss are pending.note: the supplies must be completed at least twelve months prior to last date of tender submission.with our offer have been fully executed and haveperformed satisfactorily as per the provisions of respective purchase orders/ rate contracts and all the complaints/ claim s lodged by the purchaser, if any, have been attended to and no complaints/ claimss are pending.note: the supplies must be completed at least twelve months prior to last date of tender submission.no new supply orders shall be accepted during recycling of shortfall documents. therefore bidders must be careful while uploading supply order copies online iiif the bidder is a startup or micro & small enterprise msesfor the tendered items to be offered by thema certificate issued by dipp department of industrial policy & promotion for being startup or certificate issued by authorities for being mse andb any one of the following documents attested by public notary:- valid isi marking license / dgms approval certificate for the offered item or rate contract issued by cil/ any other subsidiary for the offered item or proven ancillary certificate issued by mcl for the offered item notarized. or filled up proforma for equipment and quality control as per annexure-a for verification of your technical capability by concerned technical department. c other qualification criteria: all the following specified docume20 / 35 ntssl.no.other qualification criteriascanned copy of documents to be uploaded by all the bidders in support of other eligibility criteriapreferably self certified copy01certificate of local contentformat at annexure-hself-certification from manufacturer/ oem indicating percentage of local content & that the item offered meets the local content requirement for class-i local supplier / class-ii local supplier as the case may be along with details of locations at which the local value addition is made. note:i. non-local supplier with offered item having local content less than or equal to 20%are not eligible to bid in this procurement.ii. bidders offering imported products will fall underthe category of non-local suppliers. they can t claim themselves as class i local supplier/ class ii local supplier by claiming profit, warehousing, marketing, logistics, freight, after sales service support likeamc/cmc etc as local value addition02lowest price certificateformat at annexure-kbidder shall submit lowest price certificate as under: we certify that the prices quoted in the tender are the lowest and not higher than as applicable to any organization / ministry / department of the govt. of india or coal india ltd. and/or its subsidiaries or other psu or any other private organization. 21 / 35 annexure-aproforma for equipment and quality controlreference : cil/subsidiary co. gem bid no. date for supply of 1. name and address of the firm2. a telephone no. office/factory/worksb e-mail id3. location of manufacturing works/factories owned by the rm documentary evidence of ownership must be produced.4. brief description of the factory i.e. area covered accommodation, department into which it is divided, laboratory etc.5. details of plant and machinery erected and functioning in each department monographs and description pamphlets be supplied if available.6. whether the process of manufacture in the factory is carried out with the aid of power or without it.7. process flow charts for the whole manufacturing process of the tendered item.8. details and stocks of raw materials held.9. production capacity of items quoted for with the existing plants and machinerya normalb maximum10. details of quality assurance plan and quality control infrastructure such as laboratories etc.11. a details of technical supervisory sta in-charge of production and quality control.b skilled labour employed.c unskilled labour employedd maximum number of workers skilled and unskilled employed on any day during 18 months preceding the date of application.12. whether stores were tested to any standard speci cation, if so, copies of original test certificate should be submitted in duplicate. 22 / 35 signature of tenderer nb: details against sl. nos. 5 to 12 inclusive need be restricted to the extent they pertain to the items underannexure-b m/s. mcl, addressdear sirsub: gem bid no.:authorization & undertaking certi cate by manufactureron letter head of the principal / manufacturerwhereas we, m/s name of manufacturer who are established and reputable manufacturers of tendered/o ered items having factories at andaddresses of factoryies, do here by authorize m/s name & address our agent to submit the bid and execute the resultant contract with you on our behalf against the above tender.we, m/s name of manufacturer also undertake the following:i that, as a matter of our corporate policy, we don t directly quote / market our products and if, subsequently, at any stage, it is found that we have quoted directly to any organization, we shall be liable for penal action asper provisions. further, if at any stage, it is found that agency commission has been paid by us without declaring the agent, the commission will berecovered with interest.ii that we will accept the responsibility for the satisfactory execution of orders placed on our authorized agent including warranty/ guarantee obligations.iii that, wherever necessary, we will provide requisite inspection and testing facilities at our works in respect of orders placed on our authorized agent.iv our authorized agents price will not exceed that which we would havequoted.v letter submitted by our agent for inspection of goods would be accompanied by a certificate from us that the goods o ered for inspection as indicated in the letter have been manufactured by us.vi we hereby accept to extend our full support and commitment for all the terms and conditions including guarantee and warranty as per the cond23 / 35 itions of contract, technical specifications for the goods and services offered for supply by the above bidder on our behalf against this tender for the entire

Central Government / Public Sector

TRN :35389786 | 07 Oct, 2025

Tender Value : 52.04 Lacs

Sambalpur - Orissa

Tender for repairing of track machines by supply, replacing & crimped fittings of hydraulic & pneumatic hoses of different pressures & fittings of hydraulic & pneumatic end connections with crimping to various to various hydraulic hoses of different sizes & lengths, cut into various lengths as per requirements with all contractors men, materials, tools & plants etc as per requirements for track machines working as per the directions of engineer in charge at sd/blgr & track machines working over sambalpur division for 02 two years.

Related Sub Industries : Other Machinery

List of printing-machinery Tenders

Tender for gem bids for electronic digital postal franking machine q3

Tender for gem bids for repair, maintenance, and installation of plant/systems/equipments version 2 - surendranagar pumpingstation; work of testing, examination, inspection andcertification for lifting machines chain pulley blocks, liftingtackles, pressure hydro test .

Get Printing Machinery Tender Alert...

Related Sub Industries : Other Machinery

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us