Filters

List of sleeve Tenders

List of latest sleeve Tenders in Indian Tenders. Click on any sleeve Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for sleeve Tenders.

All-Tenders (25)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :36336942 | 05 Feb, 2026

Tender Value : 0

Coimbatore - Tamil Nadu

Tender for supply of drive lug, sleeve & square head bolt in set for ground connection for electric point machine.

Central Government/Public Sector

TRN :36337196 | 02 Feb, 2026

Tender Value : 1

Leh - Ladakh

Tender for gem bids for piston , linner sleeve , big end cell , cr brg set , thrust washer , ring set , packing kit

Central Government/Public Sector

TRN :36339081 | 07 Feb, 2026

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for steering bolt joint tata safari , steering rod and joint tata safari , upper bolt joint tata safari , lower bolt joint tata safari , break pad tata safari , stabilizer bar link tata safari , front shocker left and right tata safari , rear shocker left and right tata safari , clutch plate and presure plate tata safari , release bearing tata safari , rear suspension bush kit tata safari , rear crank seal tata safari , labour charge tata safari , chain tensioner assy lrv , distance piece lrv , bolt lrv , centre bolt with nut royal enfield , kick returning spring royal enfield , oil filter royal enfield , kilometer cable royal enfield , cable guide royal enfield , adjusting rod royal enfield , rear break shoe royal enfield , water pump assy als , thermostat valve als , cabin mounting nut bolt als , self field coil 2.5 ton , self bush set 2.5 ton , ramp assy mounting gas welding als , seat cover royal enfield , clutch cover gas kit royal enfield , oil seal royal enfield , engine oil filter royal enfield , engine oil filter swift dzire , rear break shoe hero honda , cushion rubber hero honda , foot rest hero honda , front and rear wheel spoke oh hero honda , carrier box lock hero honda , stabilizer link rod ciaze , engine oil filter ciaze , ac gas filling and checking ciaze , break pad ciaze , timing belt ciaze , spark plug ciaze , ac filter ciaze , air filter ciaze , seat lock nut ciaze , ac cooling heating relay ciaze , suspension bush left and right ciaze , labour charge ciaze , rear wheel spoke royal enfield , belt water pump ciaze , freedom service camp ciaze , head light bulb ciaze , nozzle washer ciaze , balance rod bush ciaze , relay 12v ciaze , oil filter ciaze , fuel filter ciaze , fuse 12v ciaze , gas kit ciaze , brake pad front ciaze , ignition coil ciaze , suspension bush ciaze , air cleaner hero honda , acc cable hero honda , kicker assy hero honda , battery cover hero honda , air cleaner cover hero honda , clutch plate and pressure plate hero honda , chain sprocket with chain hero honda , head light assy hero honda , foot rest left side hero honda , acc cable mounting bracket hero honda , engine gas kit hero honda , clutch housing hero honda , front break lever hero honda , side stand hero honda , centre stand hero honda , kicker oil seal hero honda , engine mounting pad maruti gypsy , clutch plate maruti gypsy , pressure plate maruti gypsy , release bearing maruti gypsy , main relay 12 volt maruti gypsy , fuel relay 12 volt maruti gypsy , starting relay 12 volt maruti gypsy , self solenoid switch maruti gypsy , kilometer cable hero honda , thermostat valve army bus , temperature sensor army bus , hub seal army bus , hub bearing army bus , acc linkage army bus , tappet cover seal army bus , cheek nut army bus , shims army bus , indicator assy army bus , front hub bearing army bus , hand break assy army bus , gear lever bush 2.5 ton , master cylinder assy 2.5 ton , suspension bush maruti gypsy , knuckle bearing maruti gypsy , hub bearing maruti gypsy , 12 volt 2.5 watt bulb royal enfield , ignition key royal enfield , sleeve cylinder assy 2.5 ton , gear lever kit 2.5 ton , isolator switch 2.5 ton , break shoe liner als , lock clip als , hub oil seal als , returning spring als , air compressor kit army bus , air dryer kit major army bus , rear break shoe spring army bus , rear hub oil seal army bus , rear hub lock army bus , rotary switch maruti gypsy steering bolt joint tata safari 19b 132361y, steering rod

State Government

TRN :36340611 | 23 Jan, 2026

Tender Value : 0

Trivandrum - Kerala

Tender for gem bids for sleeves for dvt pump q3 pac only * * % % 2 32 3 /mse relaxation for years of experienceand turnoveryes | complete& % & % * * % % 2 2 / startup relaxation for years ofexperience and turnoveryes | complete 6 6 & & /document requiredfrom selleroem authorization certificate, additional doc 1 requestedin atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer8 8 : : ; ; < < & : & : : : < < ? ?? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in & & c c d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2026/b/7093117< /dated: 13-01-2026 & & / bid document1 / 12 < :< : d d, , n n -- / / number of days for which bidwould be auto--extended3 8 8 < < < < / /number of auto extension count3 q %q % <6 <6 < < /bid to ra enabledno 2 2 /type of bidsingle packet bid2 2 t t /primary product categorysleeves for dvt pump u u & w & w /time allowed for technicalclarifications during technical evaluation2 days x x c c y y x x 2 2 / % % : : ; ; /inspection required byempanelled inspection authority / agenciespre-registered with gemno u u y y /evaluation methodtotal value wise evaluation & & /arbitration clauseno /mediation clauseno //bid details /emd detail c /requiredno /epbg detail ? /advisory bankstate bank of india 2 %/epbg percentage%3.00 c /duration of epbgrequired months.2a. , , ^ x < / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. ^ ^ /beneficiary : director, sctimstthiruvananthapuram, department of science and technology dst, sree chitra tirunal institute for medicalsciences and technology sctimst, ministry of science and technologydirector, sctimstuin number nctgc2415p2 / 12 < / bid splitting not applied. / mii purchase preference / mii purchase preferenceyes < 6 2, < u l1+x% / purchasepreference to mii sellers availabele upto pricewithin l1+x%20 < 2 2 / maximum percentage of bidquantity for mii purchase preference50 % - - < 2 2017 8 1/8 2 & % % < 16.09.2020 - / allowparticipation only from class 1/class 2 localsuppliers as per the publicprocurementpreference to make-in-india order2017 date 16.09.2020as amended andapplicable time to timeno, got exemption from competent authority as defined indepartment of expenditure om no. f.12/17/2019-ppd dated29.10.2020, since the procurement is of spares parts of theequipment / plant & machinery etc. on nomination basisfrom original equipment manufacturer oem/ originalequipment supplier oes or original part manufactureropm /mse purchase preference /mse purchase preferenceyes c e % 2, < u l1+x% /purchase preference to mse oems available uptoprice within l1+x%15 c e 2 2 / maximumpercentage of bid quantity for mse purchasepreference25 & & x x 2 2 :/details of the competent authority approvalfor paccompetent authority approval document for pac : view document x 2 /name of competentauthoritydr ashalatha r x 2 /designation of competentauthorityprofessor x 2 % / /2 /o ce /department / division of competent authorityneurology department d /ca approval numbernil3 / 12 x 2 /competent authorityapproval date2025-12-17 00:00:00 x 2 ; 2 & nx3 /brief description of the approval grantedby competent authoritysince the intended item is a proprietary product of kendalscd sleeve, it is recommended that procurement beinitiated under the proprietary article certificate pactender mode on the gem portal.1. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall berelaxed from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking relaxation from experience criteria, shall upload the supportingdocuments to prove his eligibility for relaxation.2. if the bidder is a micro or small enterprise mse as per latest orders issued by ministry of msme, the biddershall be relaxed from the eligibility criteria of bidder turnover as defined above subject to meeting of qualityand technical specifications. if the bidder itself is mse oem of the offered products, it would be relaxed from theoem average turnover criteria also subject to meeting of quality and technical specifications. the bidderseeking relaxation from turnover, shall upload the supporting documents to prove his eligibility for relaxation.3. if the bidder is a dpiit registered startup, the bidder shall be relaxed from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking relaxation from experience criteria, shall upload the supporting documents to prove his eligibility forrelaxation.4. if the bidder is a dpiit registered startup, the bidder shall be relaxed from the the eligibility criteria of bidderturnover as defined above subject to their meeting of quality and technical specifications. if the bidder is dpiitregistered oem of the offered products, it would be relaxed from the oem average turnover criteria alsosubject to meeting of quality and technical specifications. the bidder seeking relaxation from turnover shallupload the supporting documents to prove his eligibility for relaxation. 5. preference to make in india products for bids > 200 crore can also be used in bids < 200 crore but onlyafter exemption by competent authority as defined in deptt of expenditure om dated 28.5.2020: preferenceshall be given to class 1 local supplier as defined in public procurement preference to make in india, order2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministryfor specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the biddocument. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from theoem regarding the percentage of the local content and the details of locations at which the local value addition ismade along with their bid, failing which no purchase preference shall be granted. in case the bid value is morethan rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditoror cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oemsother than companies as per the public procurement preference to make-in -india order 2017 dated 04.06.2020.the buyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 6. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. sleeves for dvt pump 285 pieces under pac 6 6 1 2 & & % % % % f f % % 2 32 3 c c /minimum 50% and 20% local4 / 12 content required for qualifying as class 1 and class 2 local supplier respectivelymakekendallscdmodelkendallscd w w /technical specifications w / as per gem category speci cation /speci cation w w /specificationname c c u u /bid requirementallowed valuesgeneral featurespatient sizings //q < h q < h /consignees/reporting officer and quantity6. .6. ./s.no. //q < h q < h /consigneereporting/officer /address /quantity< < < < /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum285365sleeves for dvt pump 120 pieces under pac 6 6 1 2 & & % % % % f f % % 2 32 3 c c /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelymakekendallscdmodelkendallscd w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname c c u u /bid requirementallowed valuesgeneral featurespatient sizingm //q < h q < h /consignees/reporting officer and quantity5 / 12 . .6. ./s.no. //q < h q < h /consigneereporting/officer /address /quantity< < < < /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum120365special terms and conditions-version:2 effective from 12-01-2024 for category sleeves for dvtpump1. 1. all provisions of drugs and cosmetics act, 1940 and rules including medical device rule 2017made there under as amended till date will always be applicable. this will include all notificationsissued by central drugs standard control organization cdsco, ministry of health & family welfaremohfw and department of pharmaceuticals dop, ministry of chemicals & fertilizers time to timein this regard.2. the sellers are registered on gem based on self-declaration of valid drug license, productcertification, test reports etc if applicable. however, buyers must check and validate the details attheir end for all applicable licenses and certifications e.g., validity and authenticity/genuineness ofdrug license, product certification, manufacturer certification/licenses, test reports etc if applicable.3. the price offered by the seller/bidder shall not, in any case exceed the dpco/nppa controlled priceor price fixed by state government, if any. the seller must reduce the prices if there is anyreduction in dpco/nppa ceiling price or price fixed by state government, if any.4. any other terms and conditions which is not included or at variance with the conditions specified instc/gtc, may be added by the buyer through additional terms and conditions atc in the bid toensure items are procured from authentic/validated source with appropriate and applicable quality.the above terms and conditions are in reverse order of precedence i.e. atc shall supersede specificstc which shall supersede general terms and conditions gtc, whenever there are any conflictingprovisions.6 6 ; ; j j/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.3. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take anyresponsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.4. rate contract6 / 12 bidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.5. generic1. the seller shall not assign the contract in whole or part without obtaining the prior written consent ofbuyer.2. the seller shall not sub-contract the contract in whole or part to any entity without obtaining the priorwritten consent of buyer.3. the seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severallyliable and responsible to buyer together with the assignee/ sub-contractor, for and in respect of the dueperformance of the contract and the sellers obligations there under.6. genericwithout prejudice to buyer s right to price adjustment by way of discount or any other right or remedyavailable to buyer, buyer may terminate the contract or any part thereof by a written notice to the seller, if:i the seller fails to comply with any material term of the contract.ii the seller informs buyer of its inability to deliver the materials or any part thereof within thestipulated delivery period or such inability otherwise becomes apparent.iii the seller fails to deliver the materials or any part thereof within the stipulated delivery periodand/or to replace/rectify any rejected or defective materials promptly.iv the seller becomes bankrupt or goes into liquidation.v the seller makes a general assignment for the benefit of creditors.vi a receiver is appointed for any substantial property owned by the seller.vii the seller has misrepresented to buyer, acting on which misrepresentation buyer has placed thepurchase order on the seller.7. genericwhile generating invoice in gem portal, the seller must upload scanned copy of gst invoice and thescreenshot of gst portal confirming payment of gst.8. buyer added bid specific atcbuyer added text based atc clausessl. no.terms and conditions1eligibility criteria only manufacturers, their accredited agents, or authorized distributors are eligible to participate in this tender. additionally, they must maintain a functional office within the state of kerala. documentary evidence of the functional o ce must be submitted along with the quotation. o ers submitted without thisdocumentation will be summarily rejected without further communication.2proof of authorization bidders must submit valid documentation establishing their status as a manufacturer, accredited agent, or authorized distributor along withthe technical bid. the manufacturer s name and the country of origin of the offeredmaterials must be clearly stated in the manufacturer s authorization form mfa, which must remain valid for at least one year from the date of issuance. the prescribed format for mfa is provided in buyer added bid speci c atc format a.7 / 12 bid submission restrictions if an agent submits a bid on behalf of a principal/oem, the same agent cannot submit bids for any other principal/oem in this tender. in any bid, either the indian agent or the principal/oem may participate; but not both simultaneously. a principal/oem may authorize only one agent for this tender.4regulatory compliance all provisions of the drugs and cosmetics act, 1940 and associated rules including the medical device rules, 2017, as amended to date, shall apply. this includes all relevant noti cations issued by cdsco, mohfw, and dop.4.afor imported brands quoted on behalf of foreign principals/manufacturers, a valid cdsco certificate/license must be attached.4.bfor indigenous items, a certi cate issued by the state drug controller should be submitted.5price control compliance the price quoted must not exceed the ceiling price xed under dpco/nppa or by the state government, if applicable. in case of any reduction in such ceiling prices, the seller must revise the quoted price accordingly.6quality assurance and sample evaluation the items under this contract are critical for super-specialty treatments. substandard products may compromise patient safety and institutional integrity. the institute reserves the right to request product samples at any stage of the tender or

Central Government/Public Sector

TRN :36341056 | 22 Jan, 2026

Tender Value : 1.00 Crore

Baramulla - Jammu And Kashmir

Tender for gem bids for upgradation, constr of pcc 1 2 4 pavement of size 5000m x 5000msuitable for cheetah cheetak and alh inter lockingconcrete blocks drain of width 060 internal and length400m protective wall 6 00 rm constructed with pcc soildblocks pilot waiting shelter qick setting compoundrapidite make manufacturing sand aggregate 5 to 8mm aggregate 12 5mm aggregate 20mm aggregate 40mm aggregate 63mm load bearing concrete pcc soild blocks bricks common burnt clay building bricks sub class b hdpesheet of 400 micron thickness forming of size 25 mm x 10mm forming construction 65 mm deep x 10 mm widefilling bitumen blown of vg 10 grade sealing compoundgrade a for joint packing road marking paints syntheticenamel paint thinner confirming to is 14314 cemnetbase paint wooden form work wooden form work for endbay panels size 3 15x 0 10m mild steel tmt bars 8 mm and10mm dia powder coated anodised aluminim frame windsock confirming to dgca and icao guidelines whitecement packet 01 kg vitrified ceramic anti skid tiles ofsizes 600x600mm non skid ceramic tiles confirming to is13712 prefabricated foundation reinforcement type f 2 form work type -2 ms clamp made of ms flat 40 x 4 mm200mm long liquid water proofing compound pvc ceilingrose 2 3 terminal led tube light 1 x18w 4 feet long xlpeinsulated pvc seathed heavy duty armoured multi corecable 16 sqmm 2 core cable pvc insulated unsheathedsingle core flexible copper conductor 1100v grade of size 15 sqmm cable pvc insulated unsheathed single coreflexible copper conductor 1100v grade of size 25 sqmm cable pvc insulated and pvc sheathed 1100v grade twincore 4 sq mm flexible wire pvc insulated twin core twistedof size 22 00076 with copper conductor modular switchone way 6 amps one module ms screw 20 mm per pkt 100 bid number gem2026b7101324 dated 12-01-2026 bid document1 111 0 0 nos, ms screw 35 mm per pkt 100 nos, insulation tape 2cm width 10 mtr long, mcb single pole 230v ac 50 hz 6amps 10ka, mcb single pole 230v ac 50 hz 16 amps 10ka, mcb distribution boards in sheet metal enclosure 8 waysdouble door, residual current circuit breaker with over loadand short circuit protection dp 32 amps, modular switchone way 16 amp 1 module m, modular socket 6a 2 3 pincombined 2 module, modular socket 6a 16a 2 3 pincombined 2 module, white cover plate with frame 3 module, white cover plate with frame 4 module, white cover platewith frame 1 module, metal flush box 3 module, metal flushbox 4 module, metal flush box 1 module, compact streetlight 36 w, pvc casing caping pipe 25mmx16mm, pvccasing caping l bend 25mm, pvc casing caping elbow25mm dia, pvc casing caping t 25mm for conduit pipe, pvc casing caping square box 4 inch x 4 inch, pvc bodyexhaust fan 250mm sweep with lowers, plastic body wallmounting fan 450mm sweep, storage electrical waterheater geyser capacity 15 ltr with accessories, 3 layer pp-r polypropylene random copolymer, 20mm elbow suitablefor 20 mm dia pp r pipe, 20mm socket suitable for 20mmdia pp r pipes, 20mm equal tee suitable for 20mm dia pp rpipe, 20mm union suitable for 20mm pp r, gi reducersocket 15 20mm, gi reducer elbow 15 20 mm, pp r endplug 20mm, pp r pipe clamps suitable for 20mm piping, cpstop cock 20mm, cp bib cock 20mm with flange, pp r tankconnector 20mm with check nut and washer, rotationalmoulded polyethylene water storage tank double layer, snow white colour european wc with s or p trap concealed, 600mm x 450mm looking mirror cabinet, over headshower without arm, soap dish for one soap, towel rail cp750mm long with fixing clips complete, towel ring, toiletpaper holder, health faucet with 1.5 mtr tube and hook, cppillar cock 20mm, pre fabricated man hole cover 6 ft x 4 ft, white lead safeda, thread cotton ball 100m long, 110 x110mm nahani trap with jali, 110 mm dia upvc swr pipesingle socketed, 110mm dia upvc single tee, 4 inch diaupvc bend, 110mm dia upvc swr pipe single socketedpipe, single tier sleeping bunks, single piece cushionmade of 100 mm thick puf foam of density 40 kg, ms steellocker, office chair, office steel table, waste bin 60 ltr, looking mirror 1200x750x3.5mm thick with plasticdecorative frame, hanger stand 450mm length with 6hangers, supply of centre table toughened glass 12mmthick, supply of 2 seater sofa the top shall be ofupholstery with pu finish, anaerobic advance septic tank, 110 mm dia upvc swr single socketed pipe, 110 mm diapvc l bow, 110 mm dia pvc socket, 110 mm dia pvc tequal, pvc pipe 3 inch 75mm dia 3 mtr, 75 mm dia pvc lbow, 75 mm dia pvc socket, 75 mm dia pvc t equal, pvcsolution 250 ml, prefabricated gel earthing electrode ofpipe in pipe technolog, gi pipe 100 mm dia medium grade, back fill compound, ms earth pit cover of size 30 cm x 30cm with handle, aluminium strip 25 x3 mm x 9m, ironspikes 16 inch long, gi strip 32 x 6mm of length 3m, ginipple 20 mm dia and 10 cm long, gi reducer socket 40x20mm, lightning air terminal a copper tube 150 cm long x25 mm, ms clamp 25 x 3mm with nut and bolt complete, gi wire 12 gauge, earth augur, pvc pipe 3m long 6 inchdia, user manual, tester set, gi pipe medium grade of40mm dia 6 mtr long, gi pipe 40 mm bore 2m long, 50 mmbore gi pipe sleeve, crystaline conductive mixture, aluminimum straight edge 50mm squre 2mm thick1800mm long, wooden flat gurmala, water leveling pipe //bid details2 / 111 pvc 100 mtr, tasla iron 18 inch, shovel with woodenhandle, hammer with wooden handle 5 kg, tapemeasuring metallic 30m, mason trowel karchi, axe pickswith wooden handle, fawda with wooden handle, crowbar5 feet long, pipe wrench 18 inch, aluminium spirit level 12inch, hand gloves insulated with rubber isi mark, triplelayered hdpe water tank of size 500 ltrs, rubber boots, tampers, slump cone pot and rod, concrete vibrator withhonda gx80 petrol engine, hdpe pipe of size 13 mm innerdia, specialised eqpt hiring of concrete transit mixture asper site requirement, specialised eqpt hiring of vibratorroad roller with operating, drilling machine portable typeelectrically driven, hand rivet gun machine, tile cuttermachine with 6 spare blades each, brick hammer 1.2kgs, cutting plier insulate 6 inch, screw driver 12 inch, adjustable spanner 12 inch, hacksaw frame with 2 blade, drill bit 6mm heavy duty 10 nos in each pkt, drill bit 8mmheavy duty 10 nos in each pkt, drill bit 10mm heavy duty10 nos in each pkt, axepicks with wooden handle, rammerwith wooden handle of wt 5 kg, pipe wrench 12 inch, aluminum spirit level 6 inch, brick line, neon tester, sievefor sieving fine and corse agg, spanner rings 13x17mm, spanner rings 10x11mm, spanner rings 14x15mm, spanner rings 19x22mm, spanner rings 24x26mm, spanner ojde 19x22, plumbbob 250 gms

Central Government/Public Sector

TRN :36328725 | 22 Jan, 2026

Tender Value : 15.1 Thousand

Faridkot - Punjab

Tender for gem bids for hub oil seal , pull cable accelerator , belt v ribbed , wheel cyl repair kit , major kit slave cyl , door regulator rh , flasher unit 24 v , isolator switch , rolled pully water pump , fuel filter , oil filter , fuel feed pump , seal kit valve sleeve , element fuel water seperator , cross universal joint , ignition cum steering lock , assy hose

Central Government/Public Sector

TRN :36329708 | 22 Jan, 2026

Tender Value : 0

Gandhi Nagar - Gujarat

Tender for gem bids for clutch assy, clutch assy 260 dia, gasket cylinderhead mls, oil seal rear axle shaft, bearing blockfront antiroll bar, piston, sleeve kit, brgconnecting, big end cell

Central Government / Public Sector

TRN :36330700 | 22 Jan, 2026

Tender Value : 4.76 Lacs

Amethi - Uttar Pradesh

Tender for gem bids for oil temperature sensor , water pump assembly , oil seal flywheel side , oil seal , water level sensor , oil pressure sensor , pigtail harness , piston gudgeon pin clip , engine cylinder liner , connecting rod bearing , oil ring viton , cylinder head cover gasket , copper bush , disc washer , o ring viton , copper washer , engine wiring harness , canopy wiring harness , high pressure fuel pipe , high pressure pipe , flexible fuel pipe , o ring set , gasket set , flexible fuel pipe set , hose set , hose clip set , radiator coolant , inlet valve , exhaust valve insert , inlet valve insert , valve cone outlet , valve collet , valve spring outer , valve spring inner , valve guide , valve spring cap , injector sleeve , brass cap , injector stud bolt , lubricating oil pump , lube oil filter element , fuel filter pre , fuel filter micro , lubricating oil , lubricating oil ci 4 , air filter outer element , air filter inner element , battery , toh charges , freight charge , cylinder head calibration , fip calibration , injector calibration , turbo calibration

Central Government/Public Sector

TRN :36318502 | 28 Jan, 2026

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for ste, lv2 icvs 5330-018814 kb-05-96 seal plain, lv2 icvs5330-021422 903-01-85 ring sealing toridal, lv2 icvs5340720324857 765-08-sb166 handle lock, lv2 icvs5330720115634 765-31-71 seal plain, lv2 icvs 5365-009348 765-12-73 ring retaining, lv2 icvs 5306-72-005-3275 700-28-716-01 bolt, lv2 icvs 3040720311367765-1368 axle, lv2 icvs 675-08-sb124 tube, lv2 icvs5340720370047 730-95-40 shock absorber, lv2 icvstu6-05-211-1169-78 ball plastic shp2 dia 25.4, lv2icvs 2540400001678 675-60sb-130 cushion, lv2 icvssduasdutu unified presure warning device sdu-6-2.6, lv2 icvs 4710-005161 765-08sb-484 pipe assy, lv2icvs 5305-72-016-1483 700-35-378 screw machine, lv2icvs 5330-72-011-4237 700-40-260-11 gasket, lv2 icvs5340-135197 675-94-sb168 clamp, lv2 icvs5306720058877 672-28-44 screw machine, lv2 icvs3040720256954 765-78-1408 eye 765-78-1408, lv2 icvs5310-023460 272-80-83 nut plain hexagon, lv2 icvs3120720154243 765-78-1371 bushing sleeve 765-78-1371 /bid number: gem/2026/b/7082539* /dated: 07-01-2026 & & / bid document1 / 22

Central Government/Public Sector

TRN :36319844 | 28 Jan, 2026

Tender Value : 35.55 Lacs

Korba - Chhattisgarh

Tender for gem bids for supply, controller 24 vdc, part no. - x85535, way valve wv-m-w20-1, 2.24v, part no. - 525320831, pressure switch, partno. - 69630, motor, part no. - 272545, timer board forx85535, part no. - x250599, pressure relief valve, safetyunloader, part no. - 272722, check bushing, part no. -81938, replacement injector, part no. - 6640010003, adapter nipple, part no. - 12213, adapter union, part no. -10009591014, reducer nipple, part no. - 14727, repair kitfor injector, part no. - 664101, pressure gauge, part no. -270768, ball cage, part no. - 270675, outlet pin nut, partno. - 270619, polymide hose, part no. - 111351141, fittingassembly, part no. - 6641011004, extension adaptor, part no. - m991050350, hose stud, part no. - x432241621, hose sleeve, part no. - x432230311, straight fitting, partno. - h841512229, elbow fitting, part no. - h841518229, pressure switch, part no. - x623254562, coupling nut, partno. - h851506029, ferrule 6dpr, part no. - h861304029, hose, part no. - h259999239, grease mouth, part no. -5852, grease gun assembly, part no. - 2096811230, frl unit, part no. - h455102047, pump, part no. -6753022002, control valve, part no. - 003050, hoseend, part no. - 7013036494 /bid number: gem/2026/b/7083329* /dated: 07-01-2026 & & / bid document1 / 38

Related Sub Industries : Other Metal Products

List of sleeve Tenders

Tender for supply of drive lug, sleeve & square head bolt in set for ground connection for electric point machine.

Tender for gem bids for piston , linner sleeve , big end cell , cr brg set , thrust washer , ring set , packing kit

Tender for gem bids for clutch assy, clutch assy 260 dia, gasket cylinderhead mls, oil seal rear axle shaft, bearing blockfront antiroll bar, piston, sleeve kit, brgconnecting, big end cell

Get Sleeve Tender Alert...

Related Sub Industries : Other Metal Products

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us