Filters

List of steel-plate Tenders

List of latest steel-plate Tenders in Indian Tenders. Click on any steel-plate Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for steel-plate Tenders.

All-Tenders (132)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35945233 | 25 Nov, 2025

Tender Value : 38.85 Lacs

Kota - Rajasthan

Tender for excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20 supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c grade m 20 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c. grade m 25 supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and morth specification clauses 1009,1600 & 2202 providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and morth specification clauses 1409, 2204.4, 2206.4 & 2706 providing and laying reinforced cement concrete in superstructure as per drawing and morth specifications clauses 1700, 2302 and 2304 r.c.c. grade m 30 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and morth specifications clauses 1009,1600 and 2302 providing and laying cement concrete wearing course m 30 grade including reinforcement complete as per drawing and morth specifications clauses 1700 and 2702.2 providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and morth specifications clause 2604 providing and fillling joint sealing compound as per drawings and morth specifications with coarse sand and 6 per cent bitumen by weight clause 2604 providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and morth specification clause 2204.6 & 2504.2.2 backfilling behind abutment, wing wall and return wall complete as per drawings & morth specification clause 304.3.7 & 2204.6 granular material supply & fixing of flood gauge (water gauge) as per i.r.c. 67 standard 200 cm long fixed on angle iron posts 50x50x6 mm, 2.6 m. long. granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-ii material dry lean cement concrete construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 602.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.5 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately) providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on gi pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 600 mm x 450 mm rectangular tancha to kohani km. 0/300

State Government

TRN :35945267 | 27 Nov, 2025

Tender Value : 50.00 Lacs

Sriganganagar - Rajasthan

Tender for supply of construction material -ghadla/kankar/jhajhra murder - clay/mud masala lime kiln lime for masonry work cement ppc white cement sand/gravel gravel - local 40mm stone crusher grit (hand-crushed grit) (cut voids 1/11) 40mm stone crusher grit (crushed grit) (cut voids 1/11) 20mm stone crusher grit (crushed grit) 12/10/6mm stone crusher grit (crushed grit) brick crusher 63-40mm stone crusher grit (cut voids 1/11) 63-40mm hand-crushed stone crusher grit (cut voids 1/11) 90-45mm hand-broken stone aggregate (voids cut 1/11) gravel (voids cut 1/6) kankar (voids cut 1/6) binding material (pi 4-6) (voids cut 1/6) first class brick second class brick fly ash brick unpolished rough kota stone up to 900 square cm unpolished rough kota stone 901 to 2300 square cm unpolished rough kota stone more than 2300 square cm polished kota stone (one side polished) up to 900 square cm polished kota stone (one side polished) 901 to 2300 square cm polished kota stone (one side polished) more than 2300 square cm marble stone (makrana adanga 20 mm thick) 900 square cm up to marble stone (makrana adanga 20mm thick) 901 to 2300 sq cm marble stone (makrana adanga 20mm thick) more than 2300 sq cm marble stone (makrana adanga 20mm thick) marble chips marble stone marble powder marble stone (rajnagar ii quality/local 20mm thick) up to 900 sq cm marble stone (rajnagar ii quality/local 20mm thick) 901 to 2300 sq cm marble stone (rajnagar ii quality/local 20mm thick) more than 2300 sq cm stone frame single step size 100 x 75 mm. stone frame double step size 125 x 75 mm. glazed size-30x45 cm mosaic size-40mm thick vitrified size-60x60 cm interlock tiles/brick/block for road work cement interlocking block m-30 grade, 60mm thick interlock tiles/brick/block for road work cement interlocking block m-30 grade, 80mm thick interlock tiles/brick/block for road work cement interlocking block m-30 grade, 100mm thick fr pvc insulated copper conductor single core cable isi marked 1.50 sq mm fr pvc insulated copper conductor single core cable isi marked 2.50 sq mm fr pvc insulated copper conductor single core cable isi marked 0.50 sq mm fr pvc insulated copper conductor single core cable isi marked 1.00 sq mm fr pvc insulated copper conductor single core cable isi marked 4.00 sq mm fr pvc insulated copper conductor single core cable isi marked 6.00 sq mm local wood with fittings (for doors, windows, and furniture) factory-made doors (30 mm thick, solid core, single-pane) structural steel (tor steel fe 415/500 for reinforcement) structural steel winding wire 18 gauge structural steel iron girders conical iron/square rebar/leaf/angle iron barbed iron wire (size 12 gauge wire and 12 gauge strad/12 gauge wire and 14 gauge strad/14 gauge) iron mesh (24 gauge, 14 mesh) cement concrete mesh 40 mm thick 3 mm thick glass enamel paint distemper (water bound) lime - for painting (aras/kali) primer (for iron/wood) (for) diesel hsd movil oil bitumen shalitex board (25 mm thick) plain sheet (plain sheet) gi sheet 22 gauge (0.80 mm) plain sheet (plain sheet) gi sheet 24 gauge (0.63 mm) plain sheet (plain sheet) ms sheet 22 gauge (0.80 mm) plain sheet (plain sheet) ms sheet 24 gauge (0.63 mm) corrugated sheet gi sheet 1 mm thick corrugated sheet gi sheet 22 gauge (0.80 mm) corrugated sheet asbestos cement sheet 6 mm (2.5/2.75 x 1 m) other sheets pvc sheet 1 mm thick (colored/plain) other sheet: greenish-yellow literoof expo sheet (183x90) gi pipe 15 mm diameter (b class) gi pipe 20 mm diameter (b class) gi pipe 25 mm diameter (b class) ac pipe 75 mm diameter ac pipe 100 mm diameter pvc pipe 90 mm diameter (with ring) pvc pipe 110 mm diameter (with ring) pvc pipe 140 mm diameter (with ring) pvc pipe 110 mm (2.5 kg/sq.cm) with coupler sanitary indian w.c. sanitary orrisa w.c. sanitary european w.c. sanitary doormat foot rest porcelain lipped urinal (430350300mm) with coupling, bracket, and pvc waste pipe washbasin (450*300mm) with coupling, bracket, and pvc waste pipe cp pillar cock (dia 15 mm) (is mark) cp bib cock (dia 15 mm) (is mark) 125 mm diameter cp grating rcc np3 hume pipe with collar 1200 mm diameter rcc np3 hume pipe with collar 1000 mm diameter rcc np3 hume pipe with collar 750 mm diameter rcc np3 hume pipe with collar 600mm diameter rcc np3 hume pipe with collar 450mm diameter rcc np3 hume pipe with collar 300mm diameter pvc water tank with cover (conforming to is:12701-1989) steel fasteners 6mm x 75mm pvc conduit isi marked 25mm diameter pvc conduit isi marked 20mm diameter junction box 20mm two-way junction box 20mm one-way junction box 25mm two-way junction box 20mm one-way (pvc) module gi box for 3 modules module gi box for 2 modules module base and cover plate for 2 modules module base and cover plate for 3 modules sp 15/16 ampere sp 5/6 ampere modular socket outlet, isi mar for gram panchyat somasar

State Government

TRN :35945863 | 28 Nov, 2025

Tender Value : 50.00 Lacs

Sriganganagar - Rajasthan

Tender for supply of construction material - ghadla/kankar/jhajhra murder - clay/mud masala lime kiln lime for masonry work cement ppc white cement sand/gravel gravel - local 40mm stone crusher grit (hand-crushed grit) (cut voids 1/11) 40mm stone crusher grit (crushed grit) (cut voids 1/11) 20mm stone crusher grit (crushed grit) 12/10/6mm stone crusher grit (crushed grit) brick crusher 63-40mm stone crusher grit (cut voids 1/11) 63-40mm hand-crushed stone crusher grit (cut voids 1/11) 90-45mm hand-broken stone aggregate (voids cut 1/11) gravel (voids cut 1/6) kankar (voids cut 1/6) binding material (pi 4-6) (voids cut 1/6) first class brick second class brick fly ash brick unpolished rough kota stone up to 900 square cm unpolished rough kota stone 901 to 2300 square cm unpolished rough kota stone more than 2300 square cm polished kota stone (one side polished) up to 900 square cm polished kota stone (one side polished) 901 to 2300 square cm polished kota stone (one side polished) more than 2300 square cm marble stone (makrana adanga 20 mm thick) 900 square cm up to marble stone (makrana adanga 20mm thick) 901 to 2300 sq cm marble stone (makrana adanga 20mm thick) more than 2300 sq cm marble stone (makrana adanga 20mm thick) marble chips marble stone marble powder marble stone (rajnagar ii quality/local 20mm thick) up to 900 sq cm marble stone (rajnagar ii quality/local 20mm thick) 901 to 2300 sq cm marble stone (rajnagar ii quality/local 20mm thick) more than 2300 sq cm stone frame single step size 100 x 75 mm. stone frame double step size 125 x 75 mm. glazed size-30x45 cm mosaic size-40mm thick vitrified size-60x60 cm interlock tiles/brick/block for road work cement interlocking block m-30 grade, 60mm thick interlock tiles/brick/block for road work cement interlocking block m-30 grade, 80mm thick interlock tiles/brick/block for road work cement interlocking block m-30 grade, 100mm thick fr pvc insulated copper conductor single core cable isi marked 1.50 sq mm fr pvc insulated copper conductor single core cable isi marked 2.50 sq mm fr pvc insulated copper conductor single core cable isi marked 0.50 sq mm fr pvc insulated copper conductor single core cable isi marked 1.00 sq mm fr pvc insulated copper conductor single core cable isi marked 4.00 sq mm fr pvc insulated copper conductor single core cable isi marked 6.00 sq mm local wood with fittings (for doors, windows, and furniture) factory-made doors (30 mm thick, solid core, single-pane) structural steel (tor steel fe 415/500 for reinforcement) structural steel winding wire 18 gauge structural steel iron girders conical iron/square rebar/leaf/angle iron barbed iron wire (size 12 gauge wire and 12 gauge strad/12 gauge wire and 14 gauge strad/14 gauge) iron mesh (24 gauge, 14 mesh) cement concrete mesh 40 mm thick 3 mm thick glass enamel paint distemper (water bound) lime - for painting (aras/kali) primer (for iron/wood) (for) diesel hsd movil oil bitumen shalitex board (25 mm thick) plain sheet (plain sheet) gi sheet 22 gauge (0.80 mm) plain sheet (plain sheet) gi sheet 24 gauge (0.63 mm) plain sheet (plain sheet) ms sheet 22 gauge (0.80 mm) plain sheet (plain sheet) ms sheet 24 gauge (0.63 mm) corrugated sheet gi sheet 1 mm thick corrugated sheet gi sheet 22 gauge (0.80 mm) corrugated sheet asbestos cement sheet 6 mm (2.5/2.75 x 1 m) other sheets pvc sheet 1 mm thick (colored/plain) other sheet: greenish-yellow literoof expo sheet (183x90) gi pipe 15 mm diameter (b class) gi pipe 20 mm diameter (b class) gi pipe 25 mm diameter (b class) ac pipe 75 mm diameter ac pipe 100 mm diameter pvc pipe 90 mm diameter (with ring) pvc pipe 110 mm diameter (with ring) pvc pipe 140 mm diameter (with ring) pvc pipe 110 mm (2.5 kg/sq.cm) with coupler sanitary indian w.c. sanitary orrisa w.c. sanitary european w.c. sanitary doormat foot rest porcelain lipped urinal (430350300mm) with coupling, bracket, and pvc waste pipe washbasin (450*300mm) with coupling, bracket, and pvc waste pipe cp pillar cock (dia 15 mm) (is mark) cp bib cock (dia 15 mm) (is mark) 125 mm diameter cp grating rcc np3 hume pipe with collar 1200 mm diameter rcc np3 hume pipe with collar 1000 mm diameter rcc np3 hume pipe with collar 750 mm diameter rcc np3 hume pipe with collar 600mm diameter rcc np3 hume pipe with collar 450mm diameter rcc np3 hume pipe with collar 300mm diameter pvc water tank with cover (conforming to is:12701-1989) steel fasteners 6mm x 75mm pvc conduit isi marked 25mm diameter pvc conduit isi marked 20mm diameter junction box 20mm two-way junction box 20mm one-way junction box 25mm two-way junction box 20mm one-way (pvc) module gi box for 3 modules module gi box for 2 modules module base and cover plate for 2 modules module base and cover plate for 3 modules sp 15/16 ampere sp 5/6 ampere modular socket outlet, isi mar

Central Government/Public Sector

TRN :35947281 | 05 Dec, 2025

Tender Value : 14.23 Lacs

Pune - Maharashtra

Tender for gem bids for surgical, film x ray 30 point 5 cm x 25 point 4 cm 12 x 10 highspeed, film x ray 25 point 4 cm x 20 point 3 cm 10 x 8high speed, liquid developer for automatic processor withstarter, film x ray 38 point 1 cm x 30 point 5 cm 15 x 12high speed, bandage abdominal binder withperineal support large, coloplast colostomy kit 70 mmbase plate 10 bag 10 coloplast tube 01 barrier cream 01belt 01, graduated compression stockings cottonclass ii below knee large, graduated compressionstockings cotton class ii below knee medium, urinary leg bag 540 ml

State Government

TRN :35947962 | 01 Dec, 2025

Tender Value : 35.00 Lacs

Barmer - Rajasthan

Tender for supply of ghadla/kankar/jhajhra mortar - clay/mud mixture kiln lime for lime masonry work cement ppc white cement fine aggregate sand/gravel gravel - local fly ash surkhi stone dust (for masonry use) gitti stone/brick (for other than road work) 40mm stone crushed grit (hand-crushed grit) (voids cut 1/11) 40mm stone crushed grit (crushed grit) (voids cut 1/11) 20mm stone crushed grit (crushed grit) 12/10/6mm stone crushed grit (crushed grit) brick crushed grit road material (including 5 km lead) 63-40mm crusher crushed stone crushed (voids cut 1/11) 63-40mm hand-crushed stone crushed (voids cut 1/11) 90-45 mm. hand-broken stone aggregate (1/11" voids cut) quarry rubbish (1/6" voids cut) gravel (1/6" voids cut) kankar (1/6" voids cut) binding material (pi 4-6) (1/6" voids cut) brick (22.5 x 11 x 7.50 cm) first class (1st class) second class (2nd class) soling/kharanja/masonry stone masonry berada (rr) masonry rudda (cr) kharanja soling (for floor work up to 15 cm height) kharanja soling (for road/kharanja work up to 23 cm height) jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12', thickness 2.5-3.5') stone chips (flaky material) (3-4" thick & length and width 1-2") sandstone (dpc, sill, coping, lintel, tand, almirah, etc.) up to 25mm thick up to 25-40mm thick up to 40-50mm thick up to 50-75mm thick up to 75-100mm thick up to 100-150mm thick flooring/strip paving katla stone floor paving up to 35mm thick, min. 3 sqft or more area strip paving katla 60-75mm thick, min. 3 sq ft or more area unpolished rough kota stone up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm polished kota stone (one side polished) up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm marble stone (makrana adanga 20 mm thick) up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm marble chips marble powder marble stone (rajnagar ii quality/local 20 mm thick) up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm stone frame single patam size 100 x 75 mm. double patam size 125 x 75 mm. stone slabs up to 1.5 m length, minimum 40 mm thick 1.5 m to 2.4 m length, minimum 50 mm thick 2.4 m to 3.0 m length, minimum 65 mm thick above 3.0 m length, minimum 75 mm thick precast tiles / blocks glazed size - 30 x 45 cm mosaic size - 40 mm thick vitrified size - 60 x 60 cm interlock tiles/bricks/blocks for road work cement interlocking block m-30 grade, 60 mm thick cement interlocking block m-30 grade, 80 mm thick cement interlocking block m-30 grade, 100 mm thick fr pvc insulated copper conductor single core cable, isi marked 1.50 sq mm 2.50 sq mm 0.50 sq mm 1.00 sq mm 4.00 sq mm 6.00 sq mm local wood with fittings (for doors, windows, and furniture) mango acacia other factory-made doors (30 mm thick, solid core, single-pane) structural steel iron (tor steel fe 415/500 for reinforcement) winding wire 18 gauge iron girders conical iron/square rebar/patti/angle iron barbed iron wire (size 12 gauge wire and 12 gauge strand/12 gauge wire and 14 gauge strand/14 gauge mesh iron mesh (24 gauge, 14 mesh) cement concrete mesh 40 mm thick glass 3 mm thick glass paint enamel paint distemper (water bound) lime - for painting (saw / bud) primer (for iron/wood) petroleum products diesel hsd movil oil bitumen shalitex board (25 mm thick) plain sheet (plain sheet) gi sheet 22 gauge (0.80 mm) gi sheet 24 gauge (0.63 mm) ms sheet 22 gauge (0.80 mm) ms sheet 24 gauge (0.63 mm) corrugated sheet gi sheet 1 mm thick gi sheet 22 gauge (0.80 mm) asbestos cement sheet 6 mm (2.5/2.75 x 1 m) other sheets pvc sheet 1 mm thick (colored/plain) green & yellow litheroof expo sheet (183x90) pipe gi 15 mm diameter (b class) gi 20 mm diameter (b class) gi 25 mm diameter (b class) ac 75 mm diameter ac 100 mm diameter pvc 90 mm diameter (with ring) pvc 110 mm diameter (with ring) pvc 140 mm diameter (with ring) pvc 110 mm (2.5 kg/sq.cm) with coupler sanitary indian w.c. orrisa w.c. european w.c. foot rest porcelain urinal with lipped hole (430350300mm) coupling, bracket, and pvc waste pipe washbasin (450x300mm) with coupling, bracket, and pvc waste pipe stone beam (sw) pipe 100 mm diameter, 0.6 m long cp pillar cock (15 mm diameter) (is mark) cp bib cock (15 mm diameter) (is mark) 125 mm diameter cp grating rcc np3 hume pipe with collar 1200 mm diameter 1000 mm diameter 750 mm diameter 600 mm diameter 450 mm diameter 300 mm diameter steel conduit (isi marked) 20 mm diameter 25 mm diameter charcoal pvc water tank with cover ( (conforms to is:12701-1989) 13/0.20 mm twin core pvc sheathed flat flexible copper cable steel fasteners 6 mm x 75 mm pvc conduit isi marked 25 mm diameter 20 mm diameter junction box 20 mm two-way 20 mm one-way 25 mm two-way 20 mm one-way (pvc) module gi box for 3 modules for 2 modules module base and cover plate for 2 modules for 3 modules modular switch one-way, isi marked sp 15/16 amperes sp 5/6 amperes

Central Government/Public Sector

TRN :35947998 | 12 Dec, 2025

Tender Value : 3.25 Crore

New Delhi - Delhi

Tender for gem bids for supply, router atleast 4 x 1g rj 45 and 2 x 1gig sfp ports, ngfwutm firewall, 48 ports l3 core switch with sfp portsmanaged, 48 port l2 poe switch, 24 port l2 poe switch, network monitoring system nms, 10 g lr, sfp module smf, wireless controller, wireless access point ap, cat 6 utpcable box 305 mtr, cat 6 io gang box face plate, cat 6 24port loaded jack panel, cat 6 utp patch cord 1 mtr, cat 6utp patch cord 2 mtr, 6 core armored fiber cable singlemode, 12 port liu lc sm, 24 port liu lc sm, lc sm fiberpigtail, lc lc sm fiber patch cord 3 mtr, pvc conduitchannel flexible 1 inch with accessories, 42 u rack800x1000 with standard accessories, 24 u rack 600x600with standard accessories, 1 u pvc cable manager, installation commissiong testing and documentation ofentire boq devices ie lan active devices along with cablingnms and setup of entire network system, one residentnetwork engineer to monitor and managed the entirenetwork system of authority for five years

Central Government/Public Sector

TRN :35936333 | 12 Dec, 2025

Tender Value : 0

West Siang - Arunachal Pradesh

Tender for gem bids for piston pin lock std , piston ring , linner sleeve , main bearing , big end bearing , oil pump , oil pump chain , engine o h gas kit major , head gasket , valve inlet exhaust , valve seal , valve guide inlet exhaust , cam bush , con rod bush , thrust washer , heater plug , thermostate valve , water pump assy , fuel return pipe injector , clutch plate , pressure plate , clutch release bearing , pilot bearing , fly wheel ring , timming belt , timing belt tensioner , fan belt , power steering belt , hose pipe set , turbo charger hose pipe set , cooling jet , temperature sending unit , oil pressure switch , fuel filter , oil filter , combination switch , wheel cylinder , clutch master cylinder , clutch sleeve cylinder , front disc pad , rear brake shoe , valve tikee , engine mounting , air filter , annabond tube big size white , old dhoti , sleeve tie rod end , solniod switch 12 volt , suspension bush with end , cam seal front , cam seal rear , piston pin lock set std , piston ring std , cylinder linner std , main bearing std , big end bearing std , thrust washer std , cr bush std , valve seat inlet exhaust , engine gaskit set o h complete , tensionar lower a c , oil filter element , belt alternator , tensor long auto matic , pressure plate with clutch sleave cylinder , oil pump assy with front plate , fuel filter assy with filter , chain tensioner sec primary , chain sec primary , fixed guide , arm tensioner pri sec , guide cam shaft , guide lock , solonide switch self 12 volt , copper bush gear plate self , bend ix penion assy , sensor crank shaft , cam sensor , oil jet set , u j cross , engine mounting front rh lh , h l a , tie rod end , front brake caliper , front left side fander , scorpio engine timing tool , fip gear , araldite tube big , fevikwik big

State Government

TRN :35937544 | 25 Nov, 2025

Tender Value : 35.80 Lacs

Kota - Rajasthan

Tender for excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20 supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102 construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305 carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge for 5.05 km. granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-ii material dry lean cement concrete construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 602.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.5 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately) dismantling of cement concrete pavements as per morth specification clause 202. dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately harnawda shahji to kachnariya khurd km. 1/500, 1/800, 2/500

Central Government/Public Sector

TRN :35937700 | 28 Nov, 2025

Tender Value : 3.57 Lacs

Imphal - Manipur

Tender for gem bids for 814, main bearing, oil seal for main bearing housing, oil seal cover for main bearing housing, greasenipple for main bearing housing 3by8 inch b s p, adoptor for grease nipple, oil seal for mainbearing housing flange, main bearing housingflange, draw bar bolt with nut and lock nut, distantplate bolt for fix jaw, distant plate bolt for swing jaw, draw bar spring, tension bolt, nylock nut, tension washer, shock spring for screen, shock spring for feeder, v beltfor crusher c 180

State Government

TRN :35941047 | 28 Nov, 2025

Tender Value : 1.00 Crore

Bikaner - Rajasthan

Tender for dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer.cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm brick work with fps bricks of class designation 75 in foundation and plinth in:cement mortar 1:4 (1 cement : 4 coarse sand) cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) providing and laying precast reinforced cement concrete box culvert section of m-40 grade designed for 'aa' class loading as per irc specifications including the effect of impact, eq etc. complete on firm base of 200mm thick lean concrete of m-10 grade with aggregate of size 40mm nominal of following internal sizes. the work includes required safety measures, construction of drain for diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications size 2.00 m x 2.00 m providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.grading - i material providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. "providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion.grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix)" "providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat.grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)" "earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). above 3.0 m and upto 6.0 m depth" dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) brick work with fps bricks of class designation 75 in foundation and plinth in: cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm dismantling of flexible pavements for sewer line and manholes and disposal of dismantled materials up to a lead of 50 metres as directed by engineer including allowances for any additional dismantling beyond the drawings (measurement for payment to be as per standard drawings), re-handling of material/earth to complete the task. bituminous courses granular courses "providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - i material" providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery lighting, guarding and maintenance of diversion. providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion. grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix) providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)

Related Sub Industries : Stainless Steel

List of steel-plate Tenders

Get Steel Plate Tender Alert...

Related Sub Industries : Stainless Steel

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us