Filters

List of switches-and-plug Tenders

List of latest switches-and-plug Tenders in Indian Tenders. Click on any switches-and-plug Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for switches-and-plug Tenders.

All-Tenders (42)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34885224 | 09 Aug, 2025

Tender Value : 0

Bardhaman - West Bengal

Tender for gem bids for connector drll pnl, flp, 550v, 1.5kva, 6way , fuse crtrg hrc, 30a , sling wre rpe 16mm,16m , contactor pwr, , contactor pwr,525v,3p,300a , isolator 300 amps on off , fixed contact , moving contact assembly , kit contct pak 50us main blck , compound wear-abrsn rstnc, resin-hrdnr , relay ovrld thrml, 16-25a , head light, 24 volt , socket insulator with pin set , earth leakage relay 12v ac , cbt , sun pinion , planetary pinion fitted needle bearing s , ring gear , thermal overload relay , push switch , current transformer , pilot relay 12 v dc , contactor, ml4, pwr,

Central Government/Public Sector

TRN :34891878 | 11 Aug, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for entry and mid level desktop computer q2, computermonitor q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno -- 8 8 9 9 : : ; ; / minimum number ofbids required to disable automatic bidextension3 > > ; ;, , @ @ -- / / number of days for which bidwould be auto--extended7 b %b % : : /bid to ra enabledyesb %b % c c /ra quali cation ruleh1-highest priced bid elimination 4 4 /type of bidtwo packet bid4 4 f f /primary product categoryentry and mid level desktop computer g g & i & i /time allowed for technicalclarifications during technical evaluation2 days ; /bid number: gem/2025/b/6459939 /dated: 21-07-2025 & & / bid document1 / 14 q q 8 8 s s q q 4 4 / % % u > u > v v /inspection required byempanelled inspection authority / agenciespre-registered with gemno g g s s /evaluation methoditem wise evaluation/ w & w & /arbitration clauseno /mediation clauseno //bid details /emd detail 8 /requiredno /epbg detail 8 /requiredno /splitting / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes1. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 30% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller is2 / 14 validated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 2. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 3. reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1 g g g g / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under: g / evaluation schedules & / / item/category / quantityschedule 1entry and mid level desktop computer8schedule 2computer monitor15entry and mid level desktop computer 8 pieces i i /technical specifications* i / as per gem category speci cation /speci cation i i /specificationname 8 8 g g /bid requirementallowed valuesprocessordescription of storesdesktop computer with table mount monitor systemwith compatible chipset as per processor make withminimum 6 usb portcomputer typemid levelprocessor numberamd ryzen 5 5600g, intel core i5 12400 or highermotherboardexpansion slots pcie x 12 or higherexpansion slots m dot 2 forwifi1 or highergraphicsgraphics typeintegratedoperating systemfactory pre-loadedoperating system bydesktop oemwindow 11 professionalmemory ramram size memorycard/module in gbcapacity to be installed inthe system16, 32 or higher3 / 14 storagetype of storage installedwith the systemnvme-ssd plus hdd@7200 rpmssd - storage capacity ingb500, 512, 1024, 2048 or higherhdd - storage capacity ingb1000, 2000 or highercabinetbays for optical drive1optical drivedvd r/waudio interface typeuniversal 3.5 mm audio jack support for audio-in andaudio out, audio-in, audio-outportsnumber of usb type a portversion 2 point 04 or highernumber of usb type a portversion 3 point 2 gen 13, 4, 5, 6 or highernumber of usb ports type c1, 2 or highernumber of vga ports1 or highernumber of hdmi ports1 or highernumber of dp ports1 or highermonitoravailibility of monitoryes as per is 13252 part 1display technologyled backlit lcd liquid crystal displayscreen size in cms53.1 - 58 20.91 - 22.83, 58.1 - 63 22.87 - 24.8maximum resolution pixels1920 x 1080 full hdmonitor porthdmi, vgaintegrated webcam with micyes, noinput devicesmouse connectivityusb wired, wireless or higherkeyboard connectivityusb wired, wireless or highertype of keyboardstandardwarrantyon site oem warranty inyear3, 4, 5 or higher /speci cation i i /specificationname 8 8 g g /bid requirementallowed values //b y b y /consignees/reporting officer and quantity4 / 14 :. .:. ./s.no. //b y b y /consigneereporting/officer /address /quantity /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant830computer monitor 15 pieces i i /technical specifications* i / as per gem category speci cation /speci cation i i /specificationname 8 8 g g /bid requirementallowed valuesstandardsdescription of storea monitor is an electronic visual display device thatoutputs the video signal generated by a computer. itis essentially a screen that shows text, images, andvideos, allowing users to interact with the computersgraphical user interface gui. it comes with a tablemount for support, a power cable and/or adapter, ports for connectivity and 1 year minimum on sitewarrantyconstructionpanel typein plane switching ips or higherdisplay technologyled backlit lcd liquid crystal displayscreen form factorflatdimensionmaximum resolutionpixels1366 x 768 hd, 1440 x 900, 1920 x 1080 full hdscreen size in cm48.1 - 53 18.94 - 20.87, 53.1 - 58 20.91 - 22.83brightness in nits301 to 350, 350 to 500 or higherconnectivity portsinput port1- hdmi port, 1- vga port //b y b y /consignees/reporting officer and quantity:. .:. ./s.no. //b y b y /consigneereporting/officer /address /quantity /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant1530special terms and conditions-version:5 effective from 06-06-2025 for category entry and mid leveldesktop computer5 / 14 . for buyers:the category has been created in accordance with the model technical specification issued by theministry of electronics and information technology meity vide letter no. w-43/4/2020-iphw dated 19thaugust 2024, and is based on the parameters defined therein. the specifications applicable to thiscategory are as per the meity model technical specification dated 19th august 2024. accordingly, buyersshall not specify or mandate any particular processor, processor brand, or manufacturer in the additionalterms and conditions atc. in this context, reference may also be made to clause 2e of the gemgeneral terms and conditions gtc, which inter alia states: the specifications shall identify the keyparameters defining the products with all necessary validations related to configuration, type of data, restrictions, range / allowed values, allowed units etc. sellers as well as buyers while offering / buying thegoods / services shall have to comply with the validation rules / restrictions provided for in the categoryspecification. buyers / sellers cannot add parameters and / or drop down values not provided for incategory specification. in view of the above, buyers are not permitted to amend or modify any technicalspecification through the additional terms and conditions, and must ensure full compliance with thepredefined category specifications1productverificationa unique device serial number shall be provided by the seller at the time of supply, which is mentioned on the product. the buyer/consignee shall be able to verify thecomplete product details, including configuration, through the oem website. thebuyer/consignee should be able to perform these verifications without needing tocreate an account on the oem website.2operatingsystem1. there is no requirement that the oem of the desktop systems should be adevice partner of microsoft and holding a microsoft authorization form maffrom the software provider.2. microsoft os may be sourced directly from microsoft by oems holding devicepartner status, and those not holding device partner status may source fromauthorized distributors, i.e., ingram/reddington and their authorized channelpartners.3. buyers may ensure that maf shall not be made a mandatory requirement inbids.4. if supplies are made as per brands of oems who are global device partners, then the serial number of the machine supplied can be used to check thedetails of the product from the website of the oem.5. in the case of local device partners of microsoft, os details such as the digitalkey number should be produced with supplies, and the buyer may verify themfrom microsoft.6. in case of other oems who are sourcing from authorized distributors ofmicrosoft, reddington, or ingram, a copy of the invoice which contains therelevant serial number of windows os shall be submitted with supplies, andthe buyer/consignee can verify the same from the os server website or bytelephone, or both.7. in respect of verification of os, the consignee shall take necessary steps at thetime of acceptance. for device partner machines, buyers can check thecomputer oem website to verify the os by entering the pcs serial number andpart code number. for entities that are not device partners and source os fromdistributors networks, they may verify the serial number through the microsoftwebsite or by telephone, or both.8. in case the product offered is with a dos or linux operating system, suchverification of os shall not be applicable.9. buyer shall request for windows hardware compatibility certificate for windowoperating system to ensure the supplied hardware is compatible with windowsoperating system3requirementof oem logo buyers are advised to note that incorporating a condition stipulating an oem logo onthe motherboard is restrictive and may not be incorporated into the bids.6 / 14 processorsintel and amd processors are added as per model technical specification of desktopcomputer issued by ministry of electronics and information technology meity-iphwdivision w-43/4/2020 dated 19 aug 20245scope ofinstallationinstallation requirements shall be indicated in the bid by the buyer under theinstallation, commissioning and testing in bid ict clause. in case installation isspecified in the bid, it shall be the responsibility of the seller to ensure that allsystems are installed and satisfactory working is shown to the consignee orauthorized representative of the buyer. however, in case of direct and l1 purchase, installation of the computer system by the seller/oem is mandatory. installation doesnot include the supply of antivirus, ms office, etc., which are to be separatelyprocured by the buyer only.6buyer/consignee obligationsrelating toinstallationit is necessary that the buyer/consignee provide the seller or authorizedrepresentative access to locations, areas, or rooms for the installation of equipment.the seller or authorized representative will install systems and connect them toexisting power lines/networking at no additional charge. the buyer/consignee will beresponsible for electrical wiring, networking, or any other work connected to theinstallation area. the seller shall be only responsible for ensuring the setup of thedesktop systems, configuring, etc., as well as loading software etc. to be provided bythe buyer/consignee. any other site preparation required before installation andconnection of the desktop shall be the responsibility of the buyer/consignee. thebuyer/consignee, if required, will provide space at the installation site for the safestorage of tools, test equipment, and other materials used for installation at nocharge. in case there is a requirement of obtaining an entry pass for allowingrepresentatives to the premises, the same shall be arranged by the consignee.similarly, if there is a requirement of a gate pass for bringing items required forinstallation, the same is to be arranged by the consignee. in scenarios where multiplelocation installations are required, the buyer must indicate complete installationaddresses in the bid document. in the case of other modes of purchase, as soon asthe order is placed, complete details regarding installation may be informed to theseller. this ensures smooth coordination and delivery of products to the respectivelocations.7warrantythe buyer may ensure that as soon as supplies are received, a request for a warrantycertificate is made, along with logging into the oem website/call centre to verify thecertificate.8om related tomii, localcontent andmeity adviceon modeltechnicalspecifications buyers are requested to refer to various oms pertaining to dpiit and meity, as issuedfrom time to time, while making procurement and follow relevant provisions asapplicable.7 / 14 check pointsduringacceptance ofsupplies before generating the consignee receipt and acceptance certificate crac, theconsignee may inspect the system condition and verify that it complies with theagreed specifications and configurations. in the case of a large number of units to beprocured, then the buyer may opt for bidding and accordingly stipulate conditionsregarding installation, inspection by consignees/inspection agency. consignees whoreceive the supplies should be vigilant and should complete checking to ensure thatthere is no scope for the supply of refurbished products. at the time of receivingsupplies, the consignee may adhere to the following to ensure that any discrepanciesin supplies can be flagged, taken into account, and reflected while generating thecrac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon and checked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settings and canbe verified from the oem website. the above points are for guidance, and thebuyer/consignee may take steps considered suitable by them for checking atthe consignee end before acceptance of systems.v. an escalation matrix for customer grievance redressal shall be insisted uponby the buyer from the seller at the time of delivery.10hdd/ssdstorageretentionbuyer may add their requirement of retention of securely store all hard disk driveshdds or solid-state drives ssds used in the desktop computer under atc clause.11higherconfigurationthe buyer may permit products delivered with advanced usb standards. for example, a usb type-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 1 for seller:1oem websitelink/part nofor productverification the oem shall share the oem website link with the buyer at the time of delivery. theoffered model details/configuration should be available on their website. a uniquedevice serial number shall also be provided at the time of supply, which is alsomentioned on the product. the buyer/consignee shall be able to verify the completeproduct details, including configuration, through the shared oem website link.2changing oraltering theconfigurationthe seller must refrain from changing or altering the configuration of the factory pre-loaded machine. the machine should be delivered to the consignee in its original, factory-approved configuration.3warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specified warranty terms.the warranty certificate should be verifiable through the oem website/customer carecentre.4compliance ofextendedproducer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration is mandatoryfor manufacturing entities. therefore, all oems shall hold valid epr registration, andthe registration number should be reflected in the catalog parameter. oems shallensure compliance with all responsibilities as per epr registration applicable fromtime to time.5mandatory /statutoryrequirementsas applicableoems shall have to ensure compliance with the mandatory/statutory requirements asper the government of india notifications issued from time to time for hardware andsoftware components, as applicable.6operatingsystem1. it shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems.2. seller shall ensure to have windows hardware compatibility certificate forwindow operating systems8 / 14 scope ofinstallation it shall be the responsibility of the seller to ensure that all systems are installed, andsatisfactory working is shown to the consignee or authorized representative of thebuyer. however, in the case of direct and l1 purchase, installation of computersystem by the seller/oem is mandatory.8categoryspecification1. the seller may list products with advanced usb standards. for example, a usbtype-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 12. the supply of the monitor shall be in accordance with the parameteravailability of monitor. the details mentioned under description of storeregarding the monitor are applicable only if the monitor is being supplied.special terms and conditions-version:2 effective from 31-01-2025 for category computer monitor1. the product in gem marketplace direct purchase & l1 purchase comes with a minimum standard on sitewarranty of one year. in case the seller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.: : v v \ \/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. buyer added bid specific atcbuyer added text based atc clauses1.material: procurement of desktop based programming hmi unit and monitor.please submit gem bid document duly stamped and signed .2.delivery schedule: as per bid document. however, rinl-vsp reserves the right to revise the delivery schedules, depending on vsp s production requirements and storage capacity, without any change in price, terms and conditions of po.3. rinl reserves the right to negotiate with the tenderers without prejudice to their quoted price.4. inspection: inspection at r.i.c. central stores department, r.i.n.l., visakhapatnam steel plant, visakhapatnam-530031, andhra pradeshtest certificate not applicable5.number of sources: 01 one :the intended number of source is one . however, the bid quantity may be split in two sources as per the mii and mse policy of buyer; subject to purchase preference to eligible mses and make-in-india suppliers; subject to matching l1 price by any of the tenderers from l2 onwards in the order of ranking. if none of the l2 tenderers onwards matches the l1 price, then full tendered quantity may be ordered on the l1 tenderer.6.purchase preference: purchase preference will be accorded to micro & small entrepreneurs mses/ssis and make in india class-1 local suppliers mii class-1 as per the prevailing orders / policy of govt. / rinl, subject to fulfillment of eligibility and submission of requisite / stipulated documents in support ofeligibility and subject to matching of l-1 lnip price. 7.conditions for availing benefit is detailed under cl.no. 8.0 of detailed terms and conditions of invitation to supply tender ref vsp s website: www.vizagsteel.com.9 / 14 .for the purpose of this bid, the order of preference public procurement policy ppp & make in india mii is as under:a local mses - till the total quantity on local mses equals or exceeds 50%.b aimses - till the total quantity on aimses including local mses equals or exceeds 25%.c mii class 1 local suppliers - till the total quantity on class 1 suppliers equals or exceeds 50% d others including mses/non mses/ mii/ non mii in the order of ranking9.price firmness: price shall be quoted in rs. per no. for supply on for vsp stores basis inclusive of material price, freight, transit insurance, taxes / gst, etc. and the price finalized shall remain firm till completion of supplies. gst shall be applicable on all penalties like liquidated damages, penalties for variation in material specification, risk purchase recovery, shortages, penalty for late lifting/ delivery, forfeiture of emd / pg bond/ security deposit etc if levied by the purchaser on the seller/supplier and shall be recovered along with gstapplicable thereon. the purchaser shall issue tax invoice in favour of the seller/supplier for such recoveries. 10.not-withstanding anything specified in this tender document, rinl at its sole discretion, unconditionally and without having to assign any reason, reserves to itself the right: to accept or reject the lowest priced tender or any other tender or all the tenders; to accept any tender in full or in part quantity; to reject the offers not conforming to the tender terms and to accord purchase preference to public sector undertakings wherever applicable as per government policy/ guidelines. to extend purchase preference to local & non-local ssis / mses micro and small enterprises, subjectto submission of documents as stipulated. 11.terms of payment: 100% payment of the value of each consignment shall be made against submission of bills along with vsp s acceptance garn goods acceptance / rejection note. payment shall be released on 60th day 21st day for local micro and small enterprises and 45th day for non-local mses, subject to submission of documents as stipulated for availing mse benefits from the date of acceptance of material at vsp i.e. garn date.payment shall be made by neft/rtgs mode or such other mode of electronic fund transfer offered by banks. tenderers must furnish the required bank account details to vsp in prescribed proforma so that the same can be updated in vsp s database. 12.emd and performance guarantee bond: not required 13.right to accept/reject offers:rinl/vsp does not pledge itself to accept the lowest priced offer or any other offer and reserves to itself the right of accepting the whole or any part of the tender/offer or portion of the quantity tendered and the tenderers bidders shall supply the same at the rate quoted.14.liquidated damages: shall be as per gem gtc clause no. 15. iii with following addition/modification: subject to a maximum of 10% of value of such consignments, excluding taxes. for levy of ld in case of late delivery, date of receipt of material by rinl-vsp stores along with necessary documents shall be considered as date of delivery, subject to acceptance of material by rinl-vsp after inspection. 15.establishment of credibility of non-enlisted/non-assessed vendors: if a tenderer who responds to this bid is presently not enlisted with rinl-vsp as an approved vendor, and/or those tenderers for whom vendor assessment is not done by gem for the category desktop based programming hmi unit and monitor, has to upload the following documents in the offer/bid in gem:notarized statutory manufacturing / service industry registration certificate, i.e., empartiiissuedbydic/nsicregistration certificate / udyog aadhar memorandum for the same/similar tendered itemsfor mses.ornotarized copy of certificate of registration of shops and establishments for a dea1er/agent/trader etc.or10 / 14 notarized copy of certificate of incorporation along with memorandum and articles of association of the private/public limited companies.ii notarized copy of proprietary/partnership deeds in case of proprietary/partnership firms.iii notarized copy of gst registration certificate and pan card copy in the name of company in case of limited companies or in the name of individuals in case of proprietary firms.iv self-attested financial worth and audited financial statements for the last three 3 years.v self-attested copies of purchase orders/contracts for the same or similar tendered item/s.vi self-certified iso certificate, if any.vendor assessment report has to be submitted by the bidders for whom vendor assessment is already done by gem for the category desktop based programming hmi unit and monitor16.bidder shall have minimum 20% domestic value addition class-i or class-ii local supplier as per orderno. p-45021/2/2017-pp be-ii dt. 04.06.2020 of dpiit, ministry of commerce, goi and shall submit declaration as per format at annexure-ii of this atc along with their techno-commercial bid. 17. documents to be uploaded: by the bidder/seller during bid participation in gem: this bid document, specification sheets, drawings, corrigendum if any, etc. duly signed and stamped by bidder on all pages, confirming acceptance. bidders must select the mse option to claim mse benefits while submitting the offer on gem itself and upload their udyam registration for same/

State Government

TRN :34878984 | 25 Jul, 2025

Tender Value : 4.25 Lacs

Kolkata - West Bengal

Tender for maintenance including switching on, off operation of street light installations for the year 2025-26 at chingrighata right turn flyover, park circus 4 no bridge and wall bracket fittings installed at girder / pier of maa flyover at different location 10 / ee / ed-i / em / kmda / t-2 / 2025-26 2nd call

Central Government/Public Sector

TRN :34874584 | 08 Aug, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for gem bids for spares, eng prot pcb av106 a1b1m1 gpu, control rly boardpcb av112 a1 gpu, smps traction battery chargergpu, avr assembly gpu 17 0004a, lube oil filter gpu20 0002, fuel filter 02 nos per set gpu 20 0001, fuelpipe pump filter gpu 18 0038, fuel pipe filter pumpgpu, emergency stop switch, engine start switchpart no 10 0003, engine stop switch part no 10 0004, complete 28 v dc output cable assembly, enginekey switch gpu, diodes 28v dc rectifier gpu 06 0006, starter 24v sr no aaepl 008, dc contactor on offpcb av161 a1, 10 0008 oil pressure gauge 24 v, dcoutput ammeter 0 20000 a part no 10 0010, dcoutput volt meter 0 to 50 v part no 10 011

State Government

TRN :34876555 | 08 Aug, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for 01 2” casing capping pvc 50 nos 02 1 ½” casing and caping pvc 200 nos 03 1” casing and capping pvc 100 nos 04 switch socket 16a combined box (cona) 50 nos 05 socket 6a cona 100 nos 06 switch 6a cona 50 nos 07 socket 20a roma 150 nos 08 switch 20a roma 50 nos 09 2 pair intercom wire- finolex 25 nos 10 6a plug top cona 50 nos 11 16a plug top cona 50 nos 12 anchor europa modular 16a switch 100 nos 13 anchor europa modular 16a socket 100 nos 14 anchor europa modular fan regular 10 nos 15 anchor europa modular 5a socket 100 nos 16 anchor europa modular 5a switch 100 nos 17 abb tvisha 16a switch 50 nos 18 abb tvisha 6/16a socket 50 nos 19 insulation tape – wonder 200 nos 20 abb regulators (1 modules) 50 nos 21 4 sqmm cu flex wire frls 90 mtr roll 30 nos 22 2.5 sqmm cu flex wire frls 90 mtrs roll 40 nos 23 1.5 sqmm cu flex wire frls 90 mts roll 50 nos 24 3c x 4 sqmm cu flex cable frls (100 mtr roll) 02 nos 25 3c x 2.5 sqmm cu flex cable frls (100 mtr roll) 03 nos 26 roma regulator 150 nos 27 fan capacitor 1.5 mfd 100 nos 28 pvc flexible pipe 1 inch (100 mtr) 10 bundle 29 pvc exhaust fan crompton brisk air neo 250mm sweep 20 nos 30 led batted 40 watts 100 nos 31 crompton 9 inch exhaust fan 20 nos 32 crompton 12 inch exhaust fan 20 nos

Central Government/Public Sector

TRN :34877231 | 07 Aug, 2025

Tender Value : 27.24 Lacs

Raipur - Chhattisgarh

Tender for gem bids for supply, bid number gem2025b6462902 dated 17-07-2025 bid document1 72 1 1 led driver, pole junction box, bulb angel holder, led bulb9 w, capacitor 2.5mfd, capacitor 4 mfd, electric call bell, casing caping 25 mm, conduit pvc 25 mm, exhaust fan300 mm, exhaust fan 200 mm, conduit tee 25 mm, conduit bend20mm, conduit bend 25 mm, conduit g.i.seddle 25 mm, connector 4 pole, fan pedastel 400mm, celing fan, five step one module fan regulator, lugsalluminium 25 sq mm, lugs alluminium 35 sq mm, lugs alluminium 70 sq mm, lugs alluminium 95 sq mm, lugs alluminium 185 sq mm, mcb sp 6a, mcb db 20a, isolator dp 63a, isolator fp 40a, plug top 5a, plug top15a, s.s. combined box 15a, switch 5a piano type, socket 5a piano type, switch 15a piano type, socket 15apiano type, bell push switch, timer switch, wire 1.5sqmm, wire 2.5 sqmm, wire 4 sqmm, 3core x1.5 sqmmround cable, 3 corex 2.5 sqmm round cable, steelmachine screw-20mm, steel machine screw-25mm, steelmachine screw-32mm, steel machine screw-40mm, steelmachine screw-50mm, pvc surface box with plate 3 way, pvc surface box with plate 4 way, pvc surface box withplate 6 way, pvc surface box with plate 8 way, pvcsurface box with plate 12 way, water gyser 10 ltrs, submersible pump 5 hp, 20 stages, led strip suitable for2x2 feet light fittings 25-36 watt, schneider switch 6a, schneider switch 16a model cpx161sw1mwe, modularswitch 6a, anchor rider, modular switch 16a anchor rider, schneider socket 6a, schneider socket 16a, modularsocket 6a, industrial socket 20a with mcb single phase, industrial socket 32a with mcb three phase, 30-35 wattageled pcb plate, 45-48 wattage led pcb plate, 80 wattageled pcb plate, 120 wattage led pcb plate, 180 wattageled pcb plate, 30-35 wattage led driver, 45 wattage leddriver, 80 wattage led driver, 120 wattage led driver, 180 wattage led driver, oil filled radiator room heater, aviation obstruction light., hand dryer //bid details2 / 72

State Government

TRN :34855441 | 29 Jul, 2025

Tender Value : 25.02 Lacs

Ahmedabad - Gujarat

Tender for providing and erecting starter, electric motor, welding junction box, highmast, led street light/flood light, cables, stabilizer, panels, limit switchs, existing pole painting, existing pole box repairing, etc. and dismantling existing old cable, elect. motor, starter, pole bracket, etc. and other electrical works at rangmati irrigation project.

Central Government/Public Sector

TRN :34859903 | 26 Jul, 2025

Tender Value : 9.52 Lacs

Baramulla - Jammu And Kashmir

Tender for gem bids for genr, 20 kva diesel generating set complete with diesel enginealternator and amf control panel, xlpe cable. xlpeinsulated pvc sheathed heavy duty armoured multi corecable 10 sqmm 2 core aluminium conductor, on offchangeover switch. on off load change over switches insheet metal enclosure 63 amp, fuel filter, lub oil filter, air filter element, v belt avx 10 1136, lube oil 8 ltrs. perservice, air cleaner, quick setting compound, aggregate20mm., aggregate 40mm., manufactured sand m sand, pcc block of size 400mmx200mmx200mm type c11 3 6using 20mm graded aggregate, freshly burnt fat lime classc white in clour, cement base paint make snowcemsupercem

Central Government/Public Sector

TRN :34860015 | 28 Jul, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for wiper motor pipe , steering horse pipe , door lock , gear box top repair and service with shaft and packing with lathe machine work , above metioned parts removing the vehcile and after service fitting the veh and veh testing labour charge , dor lock , hood lifting pump repair service with oil seal kit and o rings lathe machine work , hood lifting ramp repair service with full kit , self starter repair and service with burning and damaged parts change , diesel pipe line , clutch master cylinder , clutch booster , isolation switch , auxiliary gear box mounting , auxiliary gear box bed bush and bolt , starting trouble rotary pump problem rotary pump removing the vehicle and taken to the pump house and stripping checking all parts. , pump full service and burned parts oil seals o rings, packing and other parts change and pump assembled and injector , the above all old parts removing the vehicle and new parts, repair parts, rotary pump removing after servicing fitting the vehicle , body welding works and patchwork , footrest welding works and patchwork , gear box repair and service , ball joint , top gear bearing ring big , top gear bearing small , gear change finger , gear shifting sleeve 1st and 2nd round , gear shifter synchro ring 1st and 2nd round , top gear , gear shifter sleeve 3rd and 4th , synchro cone , shifter pad , buller spring , gearbox packing kit , synchro ball kit , release bearing , clutch master cylinder assy , clutch booster , popular shaft and cross member bolt , gearbox assembly stripping sr no c removing ad gearbox cleaning ad rusty parts removing , the above all old parts removing the vehicle including gearbox and after service and repair. the parts fitting including gearbox and testing. , auxillary mounting , door catch , bumper denting , door mechanism , hood lifting pump repair and service , relay 12 and 24v , starting problem - rotary pump not working reqd for service, rotary pump removing the pumphouse and pump stripping, cleaning all parts. , censor , packing kit , roller , positioner , pump repair and service and assemble and testing, calibrating with computerised machine mechanical changes , disel lifting pump , the above mentioned all parts including rotary pump removing. the veh and after repair service fitting including rotary pump

Central Government/Public Sector

TRN :34865732 | 06 Aug, 2025

Tender Value : 23.00 Lacs

Gurgaon - Haryana

Tender for gem bids for supply, auto manual selector switch 3 position no element greencolour nc element red colour start push button withled light green colour stop push button with led lightred colour emergency stop switch along with key ondelay timer with 2no 2nc contact 11 pin relay with base 11 pin relay with base coil voltage 24v dc smps powersupply input 230v ac output 24v dc 5a 3 phase digitalmultifunction meter with basic paramaters electricalinsulation pvc fibre glass wire sleeve size 4mm electricalinsulation pvc fibre glass wire sleeve size 6mm electricalinsulation pvc fibre glass wire sleeve size 10mm round 3pin plug top 6a round 3 pin plug top 16a indicator ledlights red color 230v ac indicator led lights yellow color230v ac indicator led lights blue color 230v ac indicator led lights green color 230v ac pvc electricalinsulation tape mulitcolor 2 pole mcb enclosure ms box 4pole mcb enclosure ms box pvc insulated copper flexiblewire size 1sqmm red colour pvc insulated copperflexible wire size 1sqmm black colour pvc insulatedcopper flexible wire size 1sqmm green colour pvcinsulated copper flexible wire size 25sqmm red colour pvc insulated copper flexible wire size 25sqmm blackcolour pvc insulated copper flexible wire size 25sqmmgreen colour pvc insulated copper flexible wire size4sqmm red colour pvc insulated copper flexible wiresize 4sqmm black colour pvc insulated copper flexiblewire size 4sqmm green colour pvc insulated copperflexible wire size 6 sqmm red colour pvc insulatedcopper flexible wire size 6 sqmm black colour pvcinsulated copper flexible wire size 6 sqmm green colour pvc insulated copper flexible cable size 3 core x 25sqmm pvc insulated copper flexible cable size 4 core x25 sqmm pvc insulated copper flexible cable size 4 core bid number gem2025b6459840 dated 16-07-2025 0 0 bid document1 80 0 0 2 2 x 4 sqmm, pvc insulated copper flexible cable size 4 corex 6 sq mm, switch socket combined box 6a 16a, heavyduty ss type electrical panel lock with key, nylon heavyduty cable tie 200mm, nylon heavy duty cable tie300mm, handheld wire crimping tool upto crimping lug of16 mm 2 copper cable, digital clamp meter with probe, single pole mcb c-series 6a sp, single pole mcb c-series16a sp, double pole mcb c-series 25a dp, double polemcb c series 32a dp, double pole mcb c series 40a dp, tpn mcb c-series 32a, tpn mcb c series 40a, tpn mcb cseries 63a, single module 16a switch, double module 3 pin6a-16a combined shutter socket, pvc 4 module box, pvc6 module box, pvc 4 module plate, pvc 6 module plate, no auxiliary contact model 3tx4010-2a, nc auxiliarycontact model 3tx4001-2a, no auxiliary contact modelca5-10, nc auxiliary contact model ca5-01, powercontactor model a30, power contactor model 3tf33, power contactor model 3tf34, power contactor model3tf35, power contactor model 3tf46, power contactormodel 3tf49, power contactor model 3tf50, powercontactor model 3tf51, power contactor model 3tf53, power contactor model 3tf48, contactor kit for model no3tf46, contactor kit for model no 3tf49, contactor kit formodel no 3tf50, contactor kit for model no 3tf51, contactor kit for model no 3tf53, ring or eye type copperthimble 10mm, ring or eye type copper thimble 16mm, ring or eye type copper thimble 25mm, ring or eye typecopper thimble, 35mm, ring or eye type copper thimble50mm, pin type copper thimble 10mm, pin type copperthimble 16mm, pin type copper thimble 25mm, pvc glandpg 36, pvc gland pg 29, pvc gland pg 21, pvc glandpg13, female fasterner bolt type size m10 x 75mm, female fasterner bolt type size m12 x 75mm, led tubelight 4ft t8 18-20 watt, led tube light fitting surfacesuspended waterproof industrial fitting suitable for 4ft 2 x20 watt retrofit led tubelight, led down light roundshape 18-20 watt inner cut out size 6.5 inch, led floodlight pdc housing high efficient led 65k, led high baylight pdc housing high efficient led 65k, led street lightpdc housing high efficient led 65k, led ceiling light size600 mm x 600 mmauto manual selector switch, 3 position, no element, greencolour, nc element, red colour, start push button with ledlight, green colour, stop push button with led light, redcolour, emergency stop switch along with key, on-delaytimer with 2no/2nc contact, 11 pin relay with base3no/3nc, coil voltage-230v ac, 11 pin relay with base3no/3nc, coil voltage-24v dc, smps power supply, input:230v ac, output: 24v dc, 5a, 3 phase digital multifunctionmeter with basic paramaters, electrical insulation pvc fibreglass wire sleeve, size: 4mm, electrical insulation pvc fibreglass wire sleeve, size: 6mm, electrical insulation pvc fibreglass wire sleeve, size: 10mm, round 3 pin plug top, 6a, round 3 pin plug top, 16a, indicator led lights, red color, 230v ac, indicator led lights, yellow color, 230v ac, indicator led lights, blue color, 230v ac, indicator ledlights, green color, 230v ac, pvc electrical insulation tapemulitcolor red, yellow, blue, black, green, 2 pole mcbenclosure ms box, 4 pole mcb enclosure ms box, pvcinsulated copper flexible wire, size: 1sqmm, red colour, pvc insulated copper flexible wire, size: 1sqmm, blackcolour, pvc insulated copper flexible wire, size: 1sqmm, green colour, pvc insulated copper flexible wire, size:2.5sqmm, red colour, pvc insulated copper flexible wire, size: 2.5sqmm, black colour, pvc insulated copper flexible //bid details2 / 80

Related Sub Industries : Switchgear And Switching Apparatus

List of switches-and-plug Tenders

Get Switches And Plug Tender Alert...

Related Sub Industries : Switchgear And Switching Apparatus

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us