Filters

List of wood Tenders

List of latest wood Tenders in Indian Tenders. Click on any wood Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for wood Tenders.

All-Tenders (86)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35941730 | 27 Nov, 2025

Tender Value : 23.49 Lacs

Jhunjhunu(N) - Rajasthan

Tender for construction of cc drain and road at luhar basti sitsar ward no 12 - dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer cement concrete grade m-15 and above and pcc blocks dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m "carriage of materials by mechanical transport including loading, unloading and stacking : earth for 5.0 km" providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:5:10 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded 20mm nominal size stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick neat cement punning centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete. providing, laying and spreading of granular sub-base by providing coarse graded material (table 400-2), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - iii material "construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km)" "providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion." providing and laying un-reinforced, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints etc including all material, labour, machinery, lighting, guarding and maintenance of diversion.

State Government

TRN :35942762 | 12 Dec, 2025

Tender Value : 29.88 Lacs

Hardoi - Uttar Pradesh

Tender for gem bids for repair, maintenance, and installation of plant/systems/equipments version 2 - nagar nikay sandila wardno 20 me k p s school se pump house hotey hue pani kitanki hotey hue hasney timber tak path prakash vayvasthaka karya; electrical system or in.

corporations/Associations/Others

TRN :35943031 | 27 Nov, 2025

Tender Value : 32.03 Lacs

Jhunjhunu(N) - Rajasthan

Tender for construction of bt road and drain from mandawa road to rakesh pti plot via govt school, ward no 12 -dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer cement concrete grade m-15 and above and pcc blocks dismantling of flexible pavements and disposal of dismantled materials up to a lead of 50 metres as directed by engineer. bituminous courses "carriage of materials by mechanical transport including loading, unloading and stacking : earth for 2.0 km" dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. providing, laying and spreading of granular sub-base by providing coarse graded material (table 400-2), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - ii material "providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion." providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. "providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion." providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed stone aggregate as per table 500-23, premixed with bituminous binder @ 14.60 kg/ 10sqm (including cost of anti-stripping compound wherever required), including loading of material with f.e. loader, hot mixing of stone aggregate and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting smooth wheeled roller 8-10 tonne capacity and finishing to required level to achieve the desired density as per clause 511 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding cost of tack coat/ seal coat. with bitumen vg-grade 30 providing and applying liquid seal coat type "a" comprising of a layer of bituminous binder @ 9.8 kg/ 10 sqm (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) followed by a cover of stone chipping @ 0.09 cum/10 sqm of specified grading and rolling with power roller 8-10 tonne complete as per clause 513 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. with bitumen vg-grade 30 providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per irc:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. the finished surface to be level, uniform and free from streaks and holes as per clause 803 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m "carriage of materials by mechanical transport including loading, unloading and stacking : earth for 5.0 km" providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:5:10 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded 20mm nominal size stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick neat cement punning centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete. steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Central Government/Public Sector

TRN :35943183 | 08 Dec, 2025

Tender Value : 0

Pune - Maharashtra

Tender for supply of wooden packings

Central Government/Public Sector

TRN :35943191 | 01 Dec, 2025

Tender Value : 0

West Kameng - Arunachal Pradesh

Tender for gem bids for wooden stick with box, water pipe, wire mesh iron 4 kg, arty flag, national flag

Central Government/Public Sector

TRN :35927768 | 29 Nov, 2025

Tender Value : 0

Almora - Uttaranchal

Tender for gem bids for bhagat block board printed, edulji hall printed board, tripathi training area printed board, wooden stand, acpboards 16 x 10 inches, acp boards 15 x 18 inches, acpboards 60 x 12 cm, flex printed, plastic spacer 1 inch, wooden table, wooden trophy stand, acrylic boards

State Government

TRN :35927988 | 10 Dec, 2025

Tender Value : 0

Thiruvallur - Tamil Nadu

Tender for gem bids for gasket (bhel), edta solution 0.02n, shielding gasket, grooved gasket, prevailing torque hexagonal nut-is:1367, metal jacketed gasket, rubberized cork gasket, gasket sealing compound, gasket cylinder head, gasket cutting machine

Central Government/Public Sector

TRN :35930641 | 01 Dec, 2025

Tender Value : 0

Lohitpur - Arunachal Pradesh

Tender for gem bids for workshop, battery cable copper conductor 140 volt heavy duty redcolour 95 sqmm 200amp capacity single core with isi mark battery cable copper conductor 140 volt heavy duty blackcolour 50 sqmm 150amp capacity single core with isi mark battery terminal brass heavy duty negative comma materialiron comma connector type screw comma mounting typepanel mount comma screw mount battery terminal brassheavy duty positive comma material iron comma connectortype screw comma mounting type panel mount screwmount battery terminal brass light duty for gypsy negativecomma material iron comma connector type screw commamounting type panel mount comma screw mount batteryterminal brass light duty for gypsy positive comma materialiron comma connector type screw comma mounting typepanel mount comma screw mount bulb for fog light bigcomma power 70 watt comma voltage 24 volts with isimark bulb for fog light small comma power 55 wattscomma voltage 12 volts with isi mark fog light big commavoltage dc 12v comma power 55w with isi mark fog lightfor maruty gypsy small coma power consumption 24 wcomma voltage 12 v with isi mark mild steel flat iron size25 x 6mm with isi mark mild steel flat iron size 50 x 4mmwith isi mark mild steel flat iron size 50 x 6mm with isimark mild steel sheet plain 8ft x 4ft x 10mm weight 233 pt37kgs per sheet with isi mark mild steel sheet plain 8ft x4ft x 8mm weight 186 pt 70 kgs per sheet with isi mark mild steel sheet plain 8ft x 4ft x 3 pt 15 mm weight 73 pt51kgs per sheet with isi mark mild steel square bar 25 x25 mm with isi mark mild steel square bar 12 x 12 mmwith isi mark bolt hex head with nut size 13mm head m8x1 pt 25 x 50 mm material cold forged high tensile with isimark bolt hex head with nut size 24mm head 16 x 1 pt 5 x75 mm material material cold forged high tensile with isi bid number gem2025b6859328 dated 18-11-2025 bid document1 58 1 1 mark, bolt hex head with nut size 24mm head 16 x 2 x 90mm comma material material cold forged high tensile withisi mark, bolt with nut m16 x 1 pt 7 x 50mm material coldforged high tensile with isi mark, canvas og olive greenwheather proof 48 inch width, thread 1000 oblique 900mtr no 30 black colour material polyster, thread 1000oblique 900 mtr no 30 og colour material polyster, thread1000 oblique 900mtr no 30 white colour material polyster, needle no 21 machine needle, oil for sewing machine in100 ml bottle, packing sheet size 3 feet x 2 feet x zero pt30mm thick superior quality material neoprene rubber corksheet, packing sheet size 3 feet x 2 feet x zero pt 50mmthick superior quality material neoprene rubber cork sheet, packing sheet size 3 feet x 2 feet x zero pt 60mm thicksuperior quality material neoprene rubber cork sheet, polish cloth 1mtr width material cotton, rexine 48 inchwidth colour black superior quality, rexine 48 inch widthcolour white superior quality, thread tape in rolls, foamsize 1800 x 900 x 25mm comma material pu foam with isimark, foam size 1800 x 900 x 50mm comma material pufoam with isi mark, foam size 1800 x 900 x 75 mm commamaterial pu foam with isi mark, foam size 1800 x 900 x100mm comma material pu foam with isi mark, cutterwheel 105 x 1 pt 2 x 16 mm comma grit number 50 with isimark, cutter disc for bosch cutting machine model no2000 professional with isi mark, cutter blade 14 inch dia 1by 18 inch thick 1 inch arbor centre hole dia, cutter wheelsize 14 feet x 3 by 32 x 1 for black smith with isi mark, grinding disc 4 inch dia for hand grinder, grinding stonegreen gold norton inner dia 32 outer dia 150 mm x 25 mm, anna bond 85 gms tube, banjo bolt 10 mm with isi mark, banjo bolt 13 mm with isi mark, banjo bolt 16 mm with isimark, banjo bolt 17 mm with isi mark, banjo bolt 19 mmwith isi mark, banjo bolt 20 mm with isi mark, banjo bolt22 mm with isi mark, banjo washer 10 mm pkt of 100 noswith isi mark, banjo washer 13 mm pkt of 100 nos with isimark, banjo washer 16 mm pkt of 100 nos with isi mark, banjo washer 17 mm pkt of 100 nos with isi mark, banjowasher 18 mm pkt of 100 nos with isi mark, banjo washer19 mm pkt of 100 nos with isi mark, banjo washer 20 mmpkt of 100 nos with isi mark, banjo washer 22 mm pkt of100 nos with isi mark, banjo washer 24 mm pkt of 100 noswith isi mark, battery thimble heavy duty comma 6 mmbattery thimble connectors outer diameter 6mm commainner diameter 3 mm comma length 20 mm high qualitybrass material, bronze rod size 25 mm dia with isi marks, bronze rod size 50mm dia with isi marks, bronze rod size 6mm dia with isi marks, fire fly sheet 1 by 16 inch thicknessmaterial firefly asbestos and ceramic fiber fee mill boardsheet with resistance to high temperature and low thermalconductivity with isi mark, fire fly sheet 1 by 32 inchthickness material firefly asbestos and ceramic fiber fee millboard sheet with resistance to high temperature and lowthermal conductivity with isi mark, fire fly sheet 1 by 8inch thickness material firefly asbestos and ceramic fiber feemill board sheet with resistance to high temperature andlow thermal conductivity with isi mark, main fuel flexiblepipe with isi mark, o ring kit, pvc insulated automobilecable delux comma size 1 mm roll of 25 mtr length with isimark, pvc insulated automobile cable delux comma size 10mm roll of 25 mtr length with isi mark, pvc insulatedautomobile cable delux comma size 2 mm roll of 25 mtrlength with isi mark, spring washer 13 mm commamaterial stainless steel with isi mark, spring washer 14

corporations/Associations/Others

TRN :35931228 | 27 Nov, 2025

Tender Value : 17.35 Lacs

Jhunjhunu(N) - Rajasthan

Tender for construction of cc road from pankaj dhankar house to main mandarala road - dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer cement concrete grade m-15 and above and pcc blocks construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km) providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and laying un-reinforced, dowel jointed, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion pcc m-25.

Central Government/Public Sector

TRN :35931274 | 08 Dec, 2025

Tender Value : 5.02 Lacs

Ernakulam - Kerala

Tender for sale of wooden logs, wooden packing cases suitable for reuse, fire wood, used cartons etc from designated dumping areas within csl.

Related Sub Industries : Woods And Furniture

List of wood Tenders

Tender for gem bids for repair, maintenance, and installation of plant/systems/equipments version 2 - nagar nikay sandila wardno 20 me k p s school se pump house hotey hue pani kitanki hotey hue hasney timber tak path prakash vayvasthaka karya; electrical system or in.

Tender for supply of wooden packings

Tender for gem bids for wooden stick with box, water pipe, wire mesh iron 4 kg, arty flag, national flag

Tender for gem bids for bhagat block board printed, edulji hall printed board, tripathi training area printed board, wooden stand, acpboards 16 x 10 inches, acp boards 15 x 18 inches, acpboards 60 x 12 cm, flex printed, plastic spacer 1 inch, wooden table, wooden trophy stand, acrylic boards

Tender for gem bids for gasket (bhel), edta solution 0.02n, shielding gasket, grooved gasket, prevailing torque hexagonal nut-is:1367, metal jacketed gasket, rubberized cork gasket, gasket sealing compound, gasket cylinder head, gasket cutting machine

Tender for sale of wooden logs, wooden packing cases suitable for reuse, fire wood, used cartons etc from designated dumping areas within csl.

Get Wood Tender Alert...

Related Sub Industries : Woods And Furniture

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us