Filters

List of coarse-sand Tenders

List of latest coarse-sand Tenders in Indian Tenders. Click on any coarse-sand Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for coarse-sand Tenders.

All-Tenders (473)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :49022887 | 29 May, 2025

Tender Value : 2.62 Crore

Jagdishpur - Uttar Pradesh

Tender for annual maintenance works at i.a. jagdishpur distt. amethi. - providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 2 providing and applying primer coat with bitumen emulsion/ vg-10 on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.including supply of all materials, labour and t&p etc. required for proper completion of the work. 3 providing and laying densed gradded bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 4.50% by weight of total mix and filler, transporting the hot mix material to work site, laying with a hydrostatic paver finisher with sensor control to the required grede,level and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per mort&h specificationsclauses507 complete work in all respects. including supply of all materials,labour,t&p etc as required for proper completion of the work. 4 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.including supply of all materials, labour and t&p etc. required for proper completion of the work. 5 providing and laying 25mm thickbituminous concrete with higher capacity batch typehot mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 5.20 % percent of mix and filler ,transporting the hot mix material to work site , laying with hydrostatic paver finisher with sensor control to the required grade ,level and alignment ,rolling with smooth wheeled , vibratory and tandem roller , to achieve the desired compaction as per mort&h.. specification clause no - 507, complete in all respect. ( grading -i ) 6 road marking with hot applied thermoplastic compound with reflectoringmglass beads on bituminous surface,providing and laying of hot applied thermoplastic compound 2.50mm thick including reflectoring glass beads @ 250 gms per sqm area, thickness of 2.50mm is exclusive of surface applied glass beads as per irc :35.the finished surface to be level uniform and free from streaks and holes. rate as per uppwd. 7 earth work in excavation by mechanical means/manual means over areas including getting out and disposal of excavated earth lead upto 50m and for all lift for all kinds of soil. 8 m-150 brick workin foundation and plinth in cement mortar 1:6 with cement and coarse sand. 9 12 mm thick cement plaster of mortar 1:4 with cement and coarse sand on brick work. 10 providing & laying in position cement concrete of grade 1:5:10 with cement, coarse sand and 40 mm grade stone aggregates. 11 providing and laying 80 mm thick factory made chamfered edge cement concrete paver blocks of m-35 grade with approved colour, design and pattern ,thickness & size / shape complete item no 16.91.2 12 m-150 brick workin plinth and foundation with cement mortar 1:4 with cement and coarse sand. 13 providing and fixing concrete 1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)on culvert parapet as per standard design,including finishing smooth with cement mortar . 14 finishing walls with water proof cement paint of approved make and quality on new work with 2 coats to give an even shadeincluding supply of all materials, labour and t&p etc. required for proper completion of the work. on culvert parapet 15 repairing of 110 mm dia water supply line leakages including cost of earth work excavation, bailing out water,supply of pipe, d-joint ,nut bolts and specials etc.as required at site condition complete sa per direction of engineer in-charge. 16 repairing of 160 mm dia water supply line leakages including cost of earth work excavation, bailing out water,supply of pipe, d-joint ,nut bolts and specials etc.as required at site condition complete sa per direction of engineer in-charge. 17 providing and laying of 100 mm dia pvc pipe as per code specifications including cost of all material ,specials, excavation of earth work,all labour t&p etc ,testing of pipe line as per requirement complete 18 providing and laying of 150 mm dia pvc pipe as per code specifications including cost of all material ,specials, excavation of earth work,all labour t&petc,testing of pipe line as per requirement complete 19 repairing and rewinding of motor,repairing of pump accessories complete including cost of all material,labour ,t&p etc as required at site condition also including lowering & lifting of motor pump from tubewell boring testing complete. 20 repairing of electric control panel 21 manual sweeping ,garbage/litter collection and removal of animal carcasses etc in all streets,main and arterial roads all street and roadsurfaces, footpaths, pavements, parking, lots, foot, overbridges, busshelters, roadmedians, traffic islands and any other open public areas and structures outing. 22 cleaning & removal of garbage, litter, silt or any blockages from the street side, shallow surface drains(other than under ground sewerage and under ground drains) including tractor with trolly, its pol & driver, 2 nos helper for loading/unloading of garbage, etc . complete item as per direction of engineer in charge. 23 desilting of drain in foul position (work frequency every week ) including disposal of silt/waste out side of industrial area as per direction of engineer in charge. 24 clearing jungle i/c uprooting of rank vegetations, grass, bush, wood trees and saplings of girth upto 30cm measured at a height of 1m above ground level & removal of rubbish upto 50m.

State Government

TRN :49022950 | 15 May, 2025

Tender Value : 38.84 Lacs

Gautam Buddha Nagar - Uttar Pradesh

Tender for tender for providing and fixing of water supply in affordables houses sector 22 d ,(group h i),yea. wc-02 - providing & fixing chlorinated polyvinyl chloride cpvc pipes having thermal stability for hot and cold water supply including all cpvc plane and brass threated fittings, i/e fixing the pipe with clamps at 1 mtr spacing. this including jointing of pipes and fitting with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chase and making good the walls etc 20mm nominal outer dia pipes ar/sor 2020/uppwd item 18.8.2 2 providing and fixing ppr unions 20mm dia dar-18/18.6a.1 3 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) up pwd sor 2020/dar-18/15.2.1 4 cement concrete with 2cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (uppwd/sor-2020/279(a)) 5 providing & fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) 20 mm nominal bore 18.17.2

corporations/Associations/Others

TRN :49023085 | 10 May, 2025

Tender Value : 10.32 Lacs

Kanpur - Uttar Pradesh

Tender for tender for 27-construction of entrance gate in gram panchayat pachkhura block-sumerpur - steel work in built up tubular (round hollow tubes ),trusses etc. including cutting ,hoisting ,fixing in position and applying a priming coat of appd. steel primer including welding and bolted with special shaped etc. comp. in all respect hot finished seamless type tubes /pole dsr code no 10.16.2 2 s/f of 25.00mm long steel polished screw with washer 3 painting work with three coat of appd. synthetic enamel paint with one coat of primer 4 construction of r.c.c. foundation size 1.80x1.80mtr. and 1.80 mtr deep for builtup overhead structure including earth work in execavation 150mm thick lean concrete in 1:4:8 cement and coarce sand and 40mm gauge stone ballast r.c.c. with 1:1.5:3 cement ,coarse sand and 20mm stone grite including supply and groutingnof 25mm dia foundation bolt(600mm longas per provision of structure including cost of reinforcement and shuttering including all material ,labour t&p etc. required for proper completion of work including cartage up to site and all taxes labour cess etc. all complete work as per direction of e/i earth work in execavation in foundation by mech. means dsr code no 2.6.1 5 sand filling in foundationdsr code no 2.27 6 lean concrete in 1:4:8 infoundation dsr code no 4.1.8 7 r.c.c. 1:1.5:3 in foundation up to ground level dsr code no 5.1.2 a 8 reinforcement 2% of r.c.c. dsr code no 5.22a.1 9 trasportation .labour charges, t&p such as hydra and other tools etc. 10 providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 04 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with high intensity prismatic sheeting type iv as per irc 67 2012 retro reflective sheeting with back frame ms angle of 35x35x5 mm. legends, letters, numerals and borders etc should be as per morth specification no-801.37 the sheeting shall have a pressure sensitive adhesive of the aggressive-tack type requiring no heat solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer the acm (aluminium composite materials) shall be fixed on the back frame ms angle with riveting. micro prismatic type iv retro reflective sheeting (confirming to astm d4956- 09 shall be pressure fixed the retro reflective sheeting (shall be tested for a certificate or having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility liner removal, adhesion, impact resistance, specular gloss and fungus resistance meeting the requirement of three years outdoor weathering of the sheeting as per irc 67-2012 & proof of the same report shall be uploaded which quoting (tende: the rate shall include all materials labour t&p transportation, installatic and incidentals all complete as per direction of the engineer-in-charge morth 801 s.i. no 11 lucknow sor

Local Bodies

TRN :49023158 | 16 May, 2025

Tender Value : 8.15 Lacs

Raebareli - Uttar Pradesh

Tender for tender for repairing and painting work of outer wall of rda office - engagement of labour for cleaning of entire area including t&p complete (pwd labour rate item no.11) 2 engagement of tractor trolly for cortage of malva including loading unloading all complete.(pwd labour rate item no.58) 3 plaster of thickness 12 mmin (1:4 cement and coarse sand) patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineerin- charge. (pwd sor no.13.4.1) 4 class 150brickworkin 1 : 4 cement andcoarse sandmortarinsuper - structureforwallthickness 23 cms all complete. (pwd sor no.6.4.1) 5 providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (pwd sor no.13.8) 6 finishing walls with acrylic smooth exterior paint of required shade on new work (two or more coat applied @ 1.67 ltr/10 sqm overand including priming coat of exterior primer applied @ 2.20kg/ 10 sqm) 7 enamel painting on iron surface two coatall complete. 8 s/f glass panes all complete includting t& p material all complete. 9 s/f kota stone 20thick all complete includting t& p material all complete. 10 s/f granite stone 20thick all complete includting t& p material all complete. 11 s/f sca ffolding/farm workincludting t& p material all complete as direction by e/i. 12 p/l pcc 1:2:4 in 20mm stone ballast includting t& p material all complete as direction by e/i. 13 p/lofms iron work in plain workincludting t& p material all complete as direction by e/i. 14 letter writing ncludting t& p material all complete as direction by e/i.

corporations/Associations/Others

TRN :49023364 | 19 May, 2025

Tender Value : 12.52 Lacs

Fatehpur - Uttar Pradesh

Tender for tender for work no-05 ward no-02 housing development from the house of dr. ck tripathi to tarun jaiswal and sk chauhan house by drain and cc. - earth work in emabnkment in ordinary soilincluding lift upto 1.5 m & lead up to 50.0 mtr including supply of earth, labour and t&p also including cartage 5km up to site. 2 excavation in foundation in ordinary soil (loam clay, or sand ) including lift upto 1.5 m & lead up to 30.0 mtr & including filling,watering and ramming ofexcavated earth in to the trenches or in to the space between the building and the sides of foundataion trenches or in to the plinth and removal & disposal of surplus earth as directed by the engineer- in-charge up to a distance of 30.0 mtr from the foundation trenches .as per s.i no 251 3 cement concrete with 40mm gauge approved stone ballast, coarse sand and cement in proportions of 1:4:8 including supply of all materials, labour, tools & plant etc required for proper completion of the work. s.i. no-281 4 r.c.c. work with cement approved coarse sand of 2.5 f.m. and 2cm (3/4) gauge approved stone grit in propottions of 1:2:4 on lintels of door and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i.binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour, t&p etc required for proper completion of the work including cost of binding wire. (s.i. no-283) 5 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kn static roller in stages to proper grade and camber,applying and brooming,crushable screening to fill up the interstices of coarse aggregate watering and compacting to required density gr 3 as per t.s clause 405 6 construction of un-reinforced,construction joint only,plain cementconcretepavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m-30 (grade), coarse and fine aggregates conforming to is: 383,maximum size of coarse aggregate not exceeding 20 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film includinglevelling the formwork as per drawing), spreadingthe concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of construction joints, applying curing of concrete slabs for 14-days and water finishing to lines and grade as per drawing and technical specification clause 1501. 7 r.c.c. work with cement approved coarse sand of 2.5 f.m. and 2cm (3/4) gauge approved stone grit in propottions of 1:2:4 on lintels of door and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i.binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour, t&p etc required for proper completion of the work including cost of binding wire. (s.i. no-284 ) 8 mild steel or iron in plain work such as rcc or r.b. work wrought to required shape as necessary including bending for proper competition of work and including supply of all steel & wastage and over lapping and hooks.(s.i. no-504)

corporations/Associations/Others

TRN :49023548 | 19 May, 2025

Tender Value : 16.98 Lacs

Fatehpur - Uttar Pradesh

Tender for tender for work no-04 renewal work with general repair by pc from fatehpur cmo office to idgah. - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kn static roller in stages to proper grade and camber,applying and brooming,crushable screening to fill up the interstices of coarse aggregate watering and compacting to required density gr 3 as per t.s clause 405 2 providing and applying primer coat with bitumen emulsion (ss-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using manual means. clause 502 3 providing and applying tack coat with0.30 kg /sqm with bitumen vg-10 grade surface clean by machanical broom all complete work. 4 providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using bitumenvg10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat type c as per technical specification clause 508. 5 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type c as per technical specification clause 510 6 excavation in foundation in ordinary soil (loam clay, or sand ) including lift upto 1.5 m & lead up to 30.0 mtr & including filling,watering and ramming ofexcavated earth in to the trenches or in to the space between the building and the sides of foundataion trenches or in to the plinth and removal & disposal of surplus earth as directed by the engineer- in-charge up to a distance of 30.0 mtr from the foundation trenches .as per s.i no 251 7 cement concrete with 40mm gauge approved stone ballast, coarse sand and cement in proportions of 1:4:8 including supply of all materials, labour, tools & plant etc required for proper completion of the work. s.i. no-281 8 r.c.c. work with cement approved coarse sand of 2.5 f.m. and 2cm (3/4) gauge approved stone grit in propottions of 1:2:4 on lintels of door and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i.binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour, t&p etc required for proper completion of the work including cost of binding wire. (s.i. no-283) 9 r.c.c. work with cement approved coarse sand of 2.5 f.m. and 2cm (3/4) gauge approved stone grit in propottions of 1:2:4 on lintels of door and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i.binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour, t&p etc required for proper completion of the work including cost of binding wire. (s.i. no-283a ) 10 mild steel or iron in plain work such as rcc or r.b. work wrought to required shape as necessary including bending for proper competition of work and including supply of all steel & wastage and over lapping and hooks.(s.i. no-504) 11 earth work in emabnkment in ordinary soilincludingsupply of earth, labour and t&p also including cartage 5km up to site. 12 brick edging on both sides of the road of first brick class m--150 8 cm wide and 12 cm deep laid withmud mortar including labour & supply of brick finished to required template and in proper alignment and also including dressing & ramming the excavated earth as directed by the engineer in charge of the work including material, labour and t&p etc proper completion of the work

corporations/Associations/Others

TRN :49023560 | 19 May, 2025

Tender Value : 1.26 Lacs

Fatehpur - Uttar Pradesh

Tender for tender for work no-15 ward no-28 mahajri from pappu house to ansar house by drain and cc. - earth work in emabnkment in ordinary soilincluding lift upto 1.5 m & lead up to 50.0 mtr including supply of earth, labour and t&p also including cartage 5km up to site. 2 excavation in foundation in ordinary soil (loam clay, or sand ) including lift upto 1.5 m & lead up to 30.0 mtr & including filling,watering and ramming ofexcavated earth in to the trenches or in to the space between the building and the sides of foundataion trenches or in to the plinth and removal & disposal of surplus earth as directed by the engineer- in-charge up to a distance of 30.0 mtr from the foundation trenches .as per s.i no 251 3 cement concrete with 40mm gauge approved stone ballast, coarse sand and cement in proportions of 1:4:8 including supply of all materials, labour, tools & plant etc required for proper completion of the work. s.i. no-281 4 r.c.c. work with cement approved coarse sand of 2.5 f.m. and 2cm (3/4) gauge approved stone grit in propottions of 1:2:4 on lintels of door and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i.binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour, t&p etc required for proper completion of the work including cost of binding wire. (s.i. no-283) 5 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kn static roller in stages to proper grade and camber,applying and brooming,crushable screening to fill up the interstices of coarse aggregate watering and compacting to required density gr 3 as per t.s clause 405 6 construction of un-reinforced,construction joint only,plain cementconcretepavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m-30 (grade), coarse and fine aggregates conforming to is: 383,maximum size of coarse aggregate not exceeding 20 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film includinglevelling the formwork as per drawing), spreadingthe concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of construction joints, applying curing of concrete slabs for 14-days and water finishing to lines and grade as per drawing and technical specification clause 1501. 7 r.c.c. work with cement approved coarse sand of 2.5 f.m. and 2cm (3/4) gauge approved stone grit in propottions of 1:2:4 on lintels of door and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i.binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour, t&p etc required for proper completion of the work including cost of binding wire. (s.i. no-284 ) 8 mild steel or iron in plain work such as rcc or r.b. work wrought to required shape as necessary including bending for proper competition of work and including supply of all steel & wastage and over lapping and hooks.(s.i. no-504)

State Government

TRN :49023607 | 16 May, 2025

Tender Value : 22.62 Lacs

Lucknow - Uttar Pradesh

Tender for tender for construction and renovation work of community center located in sector-d of kanpur road scheme - rcc repairs 2 chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of engineer-in-charge. 3 75mm average thickness 4 50mm average thickness 5 25 mm average thickness 6 cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of engineer-in-charge. 7 bars upto 12 mm diameter 8 bars above 12 mm diameter 9 drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in rcc beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of engineer-in-charge.upto and including 12mm dia. 10 providing, mixing and applying bonding coat of approved adhesive on chipped portion of rcc as per specifications and direction of engineer-in-charge complete in all respect.epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make 11 providing, mixing and applying sbr polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of engineer-in-charge.note: measurement and payment: the pre-measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 n/sqmm2). 12 25 mm average thickness in 2 layers. 13 50 mm average thickness in 3 layers. 14 providing and laying sbr polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structuralmembers e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of rcc member.note: rates shall be for finished surface area of concrete and shall include the cost of making holes in existing rcc slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved super-plasticiser forrendering concrete as flowable self compacting and sbr polymer but shall exclude cost of reinforcement, bond coat, shear keys, centering and shuttering, strutting, propping etc (payment under this item shall be madeonly after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) 15 50mm thick in grade m 25 with cement content not less than 330 kg per cum 16 75mm thick in grade m 25 with cement content not less than 330 kg per cum 17 100mm thick in grade m 25 with cement content not less than 330 kg per cum 18 providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of engineer-in-charge.(the payment shall be made on the basis of actual weight of approved grout injected.) 19 epoxy injection grout in concrete/rcc work of approved make 20 providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the engineerin- charge.wooven pvc cloth 21 shotcreting r.c.c. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stoneaggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by engineer- in-chargenote: rates shall include the providing necessary ground wires etc. the levelling gauges, if used, shall be paid for separately. payment under this item shall be made only after proper wet curing has been done and surface hasbeen satisfactorily evaluated by sounding/tapping with a blunt metal instrument. 22 50mm thick in grade m 25 with cement content not less than 330 kg per cum 23 75mm thick in grade m 25 with cement content not less than 330 kg per cum 24 providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of engineer-in-charge. 25 providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of l shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by engineer-in-charge. 26 mild steel or iron work in plain work such as in r.c.c. or r.b. (when not included in an over all rates ) including bending for proper completion of the workand including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. 27 centering and shuttering including strutting, propping etc. and removal of form for : lintels, beams, plinth beams, girders, bressumers and cantilevers 28 centering and shuttering including strutting, propping etc. and removal of form for : columns, pillars, piers, abutments, posts and struts 29 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thic 30 waterproofing and terracing 31 providing and laying in situ five course water proofing treatment with app (atactic polypropylene) modified polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to is : 702, 3rd layer of roofing membrane app modified polymeric membrane 2.0 mm thick of 3.00 kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron hmhdpe film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron hmhdpe film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). 32 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 33 miscellaneous works 34 providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, includingadditional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge.note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. 35 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. 36 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand) 37 cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge.the cleaning shall consist following operations:-(i) tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) chlorination of rcc internal surface by liquid chlorine.(iv) the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. 38 door-window repair 39 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) 40 renewal of old putty of glass panes (length) 41 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead asper direction of engineer - in- charge. 42 extra for cutting reinforcement bars manually/ by mechanical means in r.c.c. or r.b. work (payment shall be made on the cross sectional area of r.c.c. or r.b. work) as per direction of engineer-in-charge. 43 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar 44 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area beyond 3 sq. metres 45 casement door double panel with french (false) mullion with zinc alloy (zamak) 3d hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.using r4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above ) x (100 mm& above) & french (false ) mullion (64mm & above) x (60 mm & above). (height above 2.5 metre) 46 toughened glass 12 mm thickness 47 finishing work 48 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 49 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 50 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 51 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 52 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 53 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : new work (two or more coats) over and including water thinnable priming coat with cement primer 54 applying priming coat:with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 55 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work 56 washrooms 57 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm 58 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 59 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including isi marked stainless steel butt hinges with necessary screws 60 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 61 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm 62 providing and fixing aluminium sliding door bolts isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

corporations/Associations/Others

TRN :49023615 | 19 May, 2025

Tender Value : 4.27 Lacs

Fatehpur - Uttar Pradesh

Tender for tender for work no-22 ward no-02 housing development from dayasagar patel house to shivlochan prajapati house by drain and cc. - m-150 class brick work in 1:4 cement coarse sand. 2 12mm thick plaster in 1:4 cement coarse sand 3 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kn static roller in stages to proper grade and camber,applying and brooming,crushable screening to fill up the interstices of coarse aggregate watering and compacting to required density gr 3 as per t.s clause 405 4 construction of un-reinforced,construction joint only,plain cementconcretepavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m-30 (grade), coarse and fine aggregates conforming to is: 383,maximum size of coarse aggregate not exceeding 20 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film includinglevelling the formwork as per drawing), spreadingthe concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of construction joints, applying curing of concrete slabs for 14-days and water finishing to lines and grade as per drawing and technical specification clause 1501. 5 r.c.c. work with cement approved coarse sand of 2.5 f.m. and 2cm (3/4) gauge approved stone grit in propottions of 1:2:4 on lintels of door and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i.binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour, t&p etc required for proper completion of the work including cost of binding wire. (s.i. no-284 ) 6 mild steel or iron in plain work such as rcc or r.b. work wrought to required shape as necessary including bending for proper competition of work and including supply of all steel & wastage and over lapping and hooks.(s.i. no-504)

corporations/Associations/Others

TRN :49023789 | 19 May, 2025

Tender Value : 7.72 Lacs

Fatehpur - Uttar Pradesh

Tender for tender for work no-26 financial year 2024-25 primary school redia gadrian purva improvement work of boundary wall. - excavation in foundation in ordinary soil (loam clay, or sand ) including lift upto 1.5 m & lead up to 30.0 mtr & including filling,watering and ramming ofexcavated earth in to the trenches or in to the space between the building and the sides of foundataion trenches or in to the plinth and removal & disposal of surplus earth as directed by the engineer- in-charge up to a distance of 30.0 mtr from the foundation trenches .as per s.i no 251 2 cement concrete with 40mm gauge approved stone ballast, coarse sand and cement in proportions of 1:4:8 including supply of all materials, labour, tools & plant etc required for proper completion of the work. s.i. no-281 3 first class/class-150 brick work in 1:4 cementand fine sand of 1.25 f.m. modulous mortar in foundation and plinth including supply of all materials, labour & tools & plants etc. requied for proper completion of the work. 4 first class/class-150 brick work in 1:4 cementand fine sand of 1.25 f.m. modulous mortar in foundation and plinth including supply of all materials, labour & tools & plants etc. requied for proper completion of the work. 5 2.5 cm thick and of cement concrete consisting of 1 part cement, 1½ parts approved coarse sand and 3 parts approved 10 mm graded stone grit and including water proofing material as ordered by the engineer incharge in the proportion as specified by the manufacturer. si no. 361 6 12 mm thick plaster with cement course sandincluding supply of all materials-labour and tools and plants etc required for completion of the work. 7 providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. dsr 2023 13.26 / 1.1405 8 wall painting (two coat) with plastic emulsion paint of approved brand & manufacture on decorative wall surface to give an even shade including thoroughly brushing, clean all dirt, grease, loose pieces and prepared smooth. si no. 15.15+15.16 9 painting or varnishing new work in small areas or new wood work with two coat (upto one sq. mt.) of approved superior quality ready mixed paint or varnish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. paint to be used should confirm the i.s.i. no. 103-1950. si no. 642

Related Searched Keywords : coarse sand

List of coarse-sand Tenders

Get coarse sand Tender Alert...

Related Searched Keywords : coarse sand

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us