Indian Tenders Tender information of India
Global Tenders International Tender information
Projects Project information of India
Tender Awarded Tender awarded information
Sub-Contractor Vendor information of India
Pay Online
Register now
Login
Contact Info All India : 9276083333 / 9274315555 South India : 9274315555

Filters

List of hydro-mechanical-work Tenders

List of latest hydro-mechanical-work Tenders in Indian Tenders. Click on any hydro-mechanical-work Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for hydro-mechanical-work Tenders.

All-Tenders (13)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :49054152 | 20 May, 2025

Tender Value : 77.92 Lacs

Abohar - Punjab

Tender for tender for special repair to building no p-137 at mil stn abohar; 1 demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise complete all as specified and directed by engr-in-charge. 2 material & labour for 75mm thick pcc 1:3:6, type c1, using 20mm graded stone aggregate as in hard standing ,plinth protection/path etc,laid in suitable panels n.exc 3.00 m length finished even and smooth without using extra cement with contraction(dummy)joints 65mm deepx10mm wide joints filledwithbituminous sealing compound of grade ‘a’/bitumen mastic filler/sealant complete all as specified and directed by engr-in-charge. 3 dismantling brick tiles in floor or in roofs laid dry and pointed in any cement mortar complete all as specified and directed. 4 demolition of mud in roofs any thickness incl plastering and leeping 5 m & l for 40mm thick cement concrete type b0 1:2:4, (using 12.5mm graded stone aggregate) as in, surface finished even and smooth without using extra cement 6 m & l 10mm thick rendering in cement mortar 1:3 on fair facesof brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by engr-in-charge. 7 m&l for preparation of roof top surfaces,providing and applying uv stable single component smart care damp proof ultra is a fiber reinforced elastomeric liquied appplied water proofing membrane formulated with pu hybrid polymers and reinforcing acrylics fibres and having sri of 106 on top of concrete roof surface in three coats including self primer at ratio pf dampproof and water 3:1 and coverage @ 1 ltr/10 sqm with a thickness of 650 micron. note : (i) 6 hrs interval between two coats will be maintained. (ii)the treatment shall be carried out by authorised applicator approved by ge as per the manufacturer(iii)payment will be made after providing warrnty certificate from the company. 8 m&l 40mm thick brick tiles laid/beded including screed bed 15mm thick in cement mortar (1:6) on existing lime concrete sufaces of roof,joints grouted flush in cement mortar (1:3) mixed with liquid wpc @ as per manufacturer instruction per bag of cement of 50kg and including flush pointing as work proceed with same material complete all as specified in clause 11.27.3 of mes sch part-i (2009) complete all as specified and directed by engr-in-charge. 9 m&l 40mm thick brick tiles( old serviceable tiles obtained from demolition/desmantled item shall be reused) laid/beded including screed bed 15mm thick in cement mortar (1:6) on existing lime concrete sufaces of roof,joints grouted flush in cement mortar (1:3) mixed with liquid wpc @ as per manufacturer instruction per bag of cement of 50kg and including flush pointing as work proceed with same material complete all as specified in clause 11.27.3 of mes sch part-i (2009) complete all as specified and directed by engr-in-charge. 10 dismantlingof reinforced cement concrete by chiseling (without affecting other portion) of any description and in any position as in roofs, floors (other than ground floor), beams, landing, chajjas and similar suspended work. 11 m&l reinforced cement concrete 1:1 1/2:3 (nominal mix) using 20mm graded stone aggregate as in slab supported on walls,beams and columns in floors,roofs,landings,balconiies,deck slabs and in shelves and the like all as specified and directed. (form work & reinforcement measured separately). 12 m & l mild steel tmt bars 10mm dia or over cut to length bent to shape required including cranking, hooking ends and binding with ms wire (annealed) not less than 0.90mm dia all as in column, beam etc . 13 m&l for form work to soffits of suspended slabs such as roof slabs,floor slabs,landings and similar work not exc.200 mm thick(horizontal or sloping) rough finish surface of concrete flat all as specified and directed. 14 m&l for precast reinforced cement concrete (1:2:4) type b1 (using 20 mm graded crushed stone aggregate) as in cover slab of drain/manhole set in cm (1:6).note :- cost of form work is deemed to be inclusive of unit rate quoted by the contractor & reinforcementshall be measured & paid separately.) 15 taking down chowkatsor frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified. 16 taking down chowkatswith shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) 17 taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in same opening after necessary easing, adjustments, minor repairs, oiling, adjustment with cutting or fixing plain fillets/planks made from second class hard wood etc to remove gap between floor and shutter complete all as specified and as directed by engineer-in- charge. 18 taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm eachcomplete all as specified and as directed by engineer-in- charge. 19 s&f factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modules ofelasticity 900 n/mm2and resistance to spread of flame of class a category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with ms hold fast/ lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in-charge. (m.s. hold fast/ lugs or ss dash fasteners shall be paid for separately). note :- for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed . 20 providing and fixing factory made single extruded wpc (wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant. wpc to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer- in- charge including supply and fixing following items : (a) stainless steel (304 grade) finished butt hinges 100mm - 4 nos. per leaf (b) stainless steel (304 grade) finished square tower bolt 150 mm long - 2nos per leaf (c) stainless steel (304 grade) finished handles 150 mm - 2 nos. per leaf 21 supply and fixingfactory made pressed steel frames of size 125 x 60mm (thickness of sheet shall be 1.25mm) for doors with one or more rebates including necessary lugs and lock strike plate, etc. , includingbutt hinges suitable nos as directed for each leaf, complete all as specified and as directed by engineer-in- charge. 22 supply and fixingfactory made pressed steel frames of size 105 x 60mm (thickness of sheet shall be 1.25mm) for doors with one or more rebates including necessary lugs and lock strike plate, etc. , including butt hinges suitable nos as directed for each leaf, complete all as specified and as directed by engineer-in- charge. 23 m&l cement concrete 1:3:6 type c-1 using 20mm graded stone aggregate for filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by engineer - in - charge. 24 s & f factory made plain framed, panelled shutter iind class hardwood rail and style 35 mm thickness (two panel) with lock rail and panel of 9 mm b.w.p. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per is : 1003 (part i), kiln seasoned and chemically pressure treated complete all as specified and directed by engineer - in - charge. 25 s & f factory made 35mm thick iind class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in ssr part – i, section – 8, clause 8.20 (a) ; supplied and fitted to chowkats complete all as specified and directed by engineer - in - charge. 26 s & f100 mm aluminium alloy anodised butt hinges, and fixed with steel scerws for frp doors/pvc door, type b-21complete all as specified and directed by engineer - in - charge. 27 s & f in repair 100 mm mild steel butt hinges, and fixed with steel scerws for wooden doors, complete all as specified and directed by engineer - in - charge.note :- rate deemed including necessary welding etc) 28 s & f tower bolt 200 mm of aluminum complete all as specified and directed by engineer - in - charge. 29 s & f in repair tower bolt 200 mm of aluminum complete all as specified and directed by engineer - in - charge. 30 s & f door handle d type 150 mm of aluminum complete all as specified and directed by engineer - in - charge. 31 s & f in repair door handle d type 150 mm of aluminum complete all as specified and directed by engineer - in - charge. 32 s & f aluminium alloy, anodised, sliding door bolt 300mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed. 33 s & f in replacement aluminium alloy, anodised, sliding door bolt 300mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed. 34 s&f floor door stopper of aluminum allow body and tongue, 150mm overall length, anodised, with hard drawn steel spring, fixed in floor. 35 s&f in repairs floor door stopper of aluminum allow body and tongue, 150mm overall length, anodised, with hard drawn steel spring, fixed in floor. 36 s & f mild steel 300mm ordinary rat rail rod pattern spring inluding roller and roller plate complete all as specified. 37 s & f in repairs mild steel 300mm ordinary rat rail rod pattern spring inluding roller and roller plate complete all as specified. 38 s& fstainless steel curtain rod 25 mm dia , including fancy type brackets and pair of decorated end knobs (finials), stop roller etc.as per site requirement, fixed to wall with fixing accessories,including taking down old existing curtain rods any description complete all as specified and directed by engr-in-charge. 39 s&f factory made box type steel window with side hung shuters both glazed and gauged, shutter frame 60x25mm erw hollow p section with wall thickness not less than 1mm fixed to pressed steel frame 120mmx70mmx1.60mm thick including fixing glazed portion, iron grills 8mm suare ms barhinges with steel handle and fitting, lugs etc., including one shop coat of primer complete all as specified.(drg no btd889 sheet 1/4 ).note :- (i) wire mesh and glass shall be measured and paid separately under relevent items of sch/boq.(ii)measurement for payment shall be the opening area of the window between inner edges of wall. 40 s&f factory made box type steel window with side hung glazedshutter, frame 60x25mm erw hollow p section with wall thickness not less than 1mm fixed to pressed steel frame 120mmx70mmx1.60mm thick including fixing glazed portion, iron grills 8mm suare ms barhinges with steel handle and fitting, lugs etc., including one shop coat of primer complete all as specified.note :- (i)wire mesh and glass shall be measured and paid separately under relevent items of sch/boq.(ii)measurement for payment shall be the opening area of the window between inner edges of wall. 41 s&f stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm all as specified. 42 s & f in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm all as specified. 43 s & f 4 mm thick sheet glass ordinary quality and glazing within square not exceeding 0.50 sqm including aluminium cleat/rubber beading in each pane complete all as specified and directed by engineer - in - charge. 44 supply & fixing aluminium anodisedframes/chowkhats,shutter and like made out of aluminium sectionpowder coated(minimum thickness of powder coating not less than 50 micron) for window, ventilators and aluminium partition with one or more rebates or without rebate including joining cleat for fixing etc., the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners. aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and as directed by engineer-in-charge.. 45 s & f figured glass 4 mm thick pin head type and glazing withnot exceeding 0.50 sqmincluding aluminium cleat/rubber beading in each pan complete all as specified and directed by engineer - in - charge. 46 material and labour for machine cut 16 to 18 mm thick, kota stone slab (size of slab not less than 500x550mm for flooring and in single piece for treads of staircase), laid over and including 20 mm thick bedding layer in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding (mirror finish) andpolishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed by engineer-in-charge. 47 material and labour for machine cut 16-18mm thick, kota stone slab as in skirting, dado and on pillar, laid over and including 10 mm thick bedding layer in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding (mirror finish ) and polishing by machine, including machine cutting to make it square or rectangularcomplete all as specified and as directed by engineer-in-charge. 48 taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc. 49 m & lfor rendering 15mm thik on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement. 50 m & lfor rendering 15mm thick on fair faces of brick work in cement mortar 1:4 finished even & smooth without using extra cement. 51 m&l rendering10 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement. 52 m&l integal water proofing compound 53 preparation of new plastered surfaces/existing platered surfaces and applyingwall care putty in internal/external walls/rcc surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed.note : (i) the prepared surface after wall putty, the contractor will inform to the ge as well as to the engineer-in-charge for site inspection before applying further external finishes. please note that the further external finishes work will start only after approval of the prepared surface from the ge as well as to the engineer-in-charge through site order. 54 preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using spray gun to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. 55 preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats by by using spray gun to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. 56 preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade)@ 5 sq.m/litre/2 coats by using spray gun to external walls/rcc surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. 57 preparation of new/existing plastered surfaces as in ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. this shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by engineer-in-charge. 58 preparation of new/existing plastered surfaces as in walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. this shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by engineer-in-charge. 59 m & l providing two coats of synthetic enamel paint over new steel surfaces and a coat of red oxide primer onincluding preparation of surface of any description not exceeding 10 cm width or girth complete all as specified and directed by engineer -in -charge. 60 m & l providing two coats of synthetic enamel paint over new wooden surface including preparation of surface withprimer all as specified. 61 m&l for preperationof old steel surface and applying two coat of synthetic enamel paint complete all as specified and directed by engineer -in -charge. 62 m&l for preperationof old wooden surface and applying two coat of synthetic enamel paintcomplete all as specified and directed by engineer -in -charge. 63 m&l for shotcreting 25mm thick in rcc columns, beams and slabs etc in layers with approved design mix (minimum cement content of 350 kg/cum on m-25) concrete having the specified minimum characterristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of centering and shuttering at edges and corners etc as directed by engineer-in-charge including chipping of unsound /weak concrete material 25 mmaverage thickness from slabs,beams, columns etc with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with dr fixit epoxy zinc primer or equivalent @ 6sqm/ltr at dft of 100microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of engineer-in-charge. 64 m&l hard drawn steel wire fabric not exc 4kg/sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemntall as specified & directed by engineer-in-charge. 65 m & l 5mm thick rendering in cement mortar 1:3 on fair facesof brick work or concrete surfaces of ceiling finished even and smooth without using extra cementcomplete all as specified and directed by engineer - in - charge . 66 dismantling structural steel work including doors,gates but excluding framed truss etc. 67 s & f framed work such as grills,cooler stand ,ladder grating and sun shed etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming tofe 410-0 or fe 310-0 all as specified . 68 dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the permices. 69 s&f glazed ceramic colouredtiles joint free 350x250x7mm/450x350x7mm square or rectanguleras on walls etc set and jointed in neat cement slurry and pointed in whiteor coloured cement to match over and including 10mm thick rendering in cm 1:4 complete all as specified and directed by engr-in-charge. 70 m&l non skid ceramic coloured /printed tiles 7 to 8 mm thick( square / rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shadeover and incl 15 mm thick screed bed in cm 1:6 complete all as specified and directed by engr-in-charge. 71 m&l cement concrete type b-0, 1:2:4 using 12.5 mm graded stone aggregate as in floors 25 mm thick for tilesall as specified.& directed by engr -in-charge.. 72 m&l 16-18 mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and likein cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding/moulding of edges. 73 demolitionof cement concrete ( un re-inforced) of any description in ground floor and pavings exc15 cm thickness (below or above gl). 74 material and labour for water proofing treatment to rcc sunken slab and adjoining vertical slab as described following any one method complete as per directions of ge. 75 method 1(a) supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, smart care damp proof 2k, having 100% elongation as per astm d412, resisting 5 bars hydrostatic pressure as per din 1048, reduction to rapid chloride shall be 70 as per din 1048, crack bridging upto 1.2mm as per astm 4548.5 clean all working surface & made free from dirt, grease laitance etc. after inspection for all working area rough surface, cracks & from dirt, grease laitance etc. after inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 cement : 1polymer : 4 sand). making gola of size 75x75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 (1 cement : 1 polymer : 4 sand). the coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls. the mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc, complete as per manufactures specifications.(b) bore packing: all the borehole gaps between concrete surface and pvc pipe of various dia upto the neck level shall be filled with non-shrink free flow grout – smart care gp grout having dual shrinkage compensation property. before the bore packing, surface of the pvc pie and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent. (c) apply12-15mm plaster on slab and vertical surface admixed with smart care vitalia neo @200ml per bag of cement before treatment. 76 method 2(a) supplying and applying two component cementitious & acrylic flexible water proofing & protective coating, two coats with 1mm dft, having hydrostatic (positive) water pressure resistance (din 1048) is 7. abrasion resistance, cm/km is 0.09 of dr fixit pidifin 2k @ 1.5kg/sqm with a paint brush over existing slab surface and adjoining vertical surface. the polyester reinforced coated netof 45g/sqm, 2.5mmx2.5mm is laying on the surface immediately on the first coat of two component modified polymer dr fixit pidifin 2k. after removal of all lose materials like dust etc. with wire brush coir brushes from surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based mortar/micro concrete, after that making the gola onsurrounding wall’s junction and seal the vertical walls. in case of core cutting on the surface, the joint is seal with non-shrink grout.(b) the coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls.(c) apply12-15mm water proof plaster on slab and vertical surface admixed with dr fixit pidiproof 77 m & l pcc (1:5:10)using 40mm graded burnt bricksaggregate as in foundation filling & mass concrete or as in sunkenfloor complete all as specified & directed by engineer-in-charge 78 dismantling water tanks and removing to store ofexc 500 and nexc 1000 ltr capacity 79 s & f rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part i of capacity 1000 litres all as specified and directed by engineer - in - charge . 80 s&f in repair 20mm ball brass valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe orr brass ferrule and fixed. 81 s & f in 20mm bore gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed all as specified . 82 s & f in 25 mm bore gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed all as specified . 83 s & f in repairs pvc 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of pvc 32mm bore and connection to wc pan complete all as specified. 84 s&f in repair viterous china squating pan orrisa pattern size 580/440mm wash down water closet pan ,white (excluding fixing bolts, flushing cistern and flush pipe) with plastic seat cover. 85 s&f in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe ,anti-syphonage pipe and white closed patern with flat bottom & mild steel cromium plated or aluminium hinging device plasticseat cover complete . 86 s&f repairs vitreous china half stall urinals flat back white minimum with grating and union for discharge pipe ,providing & fixing plugs, bedding urinal against wall in cm 1:2 , securing urinal to plugs with & incl 60mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with nbrackets, flush pipe, grating and union for discharge pipe complete all as specified. 87 s & f in repairs vitrous china oval wash hand basin white of size 550x400 mm including brackets 300mm long pvc connection with brass nuts, 40mm dia waste coupling including cutting for and pinning in end of brackets or erecting stand etccoloured top bowl type screwed shank fly nut flange end including cutting for and pinning in granite slab of hole including 32 mm dia chromium plated waste coupling and bottle trap all as specified. 88 s&f in repair 600mm x 450mm beveled edge mirror of selected quality glass on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washes fixed in repair. 89 s & f repairs 15 mm bore concealed stop cock cast copper alloy screwed down high pressurewith crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated with long shank and cup (concealled type) 90 s & f in repairs 15mm bore angle cock one waychromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified . 91 s & f in repairs 15 mm bore bib tap fancy type chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe all as specified. 92 s&f in repairs pillar taps 15mm borefancy type chromium plated cast copper alloywith capstan heads scre-wed down high pressure with or without lettered hot orcold with long screwed shanks and fly nuts screwed for iron pipe . isi marked 93 s&f in repair brass chromium plated central hole basin mixer with regular spout,popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by engr-in-charge. 94 s&fin repair brass chromium plated shower rose 125mm size with swivel joints,any size, incl shower arm fixing to pipe or union complete all as specified and directed by engr-in-charge. 95 s&f in repair pvc connection both side brass unions internal for size 15mm dia and 450mm long all as specified and directed by engineer-in-charge. 96 s&f ewc jet spray complete all as specified and directed. 97 s & f in repairsoap dish approximately size 160 x160x 90 mm and fixed withas chromium plated brass screws complete all as specified and directed by engineer -in -charge. 98 s&f peg set of stainless steel solid body of 125mm to 175 mm having 6 nos hooks fixed with brass chromium plated screws complete in all as specified 99 taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by engr-in-charge. 100 fixing only mild steel tubes of size 15mm bore (medium grade) galvanised with all fittingsand fixed complete to wallall as specified & directed by engineer-in-charge. 101 supply & fixing mild steel tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to wallall as specified & directed by engineer-in-charge. 102 taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store omplete all as specified and directed by engineer -in -charge. 103 supply & fixing of 16mm outer dia cpvc pipes sdr 11 including all fittings plain/brass threaded cpvc sdr 11 fittings (like elbow, tee, socket, reducer, union, bushing, step over bends, end cap, end plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including cpvc solvent cement for jointing omplete all as specified and directed by engineer -in -charge. 104 supply & fixing of 20mm outer dia cpvc pipes sdr 11 including all fittings plain/brass threaded cpvc sdr 11 fittings (like elbow, tee, socket, reducer, union, bushing, step over bends, end cap, end plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including cpvc solvent cement for jointing omplete all as specified and directed by engineer -in -charge. note :-(i) pipes inside the buildings shall be fixed concealed and outside the buildings shall be fixed on the surface along wall with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, as directed by engineer-in-charge.(ii)bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on btd drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. 105 supply & fixing of 25mm outer dia cpvc pipes sdr 11 including all fittings plain/brass threaded cpvc sdr 11 fittings (like elbow, tee, socket, reducer, union, bushing, step over bends, end cap, end plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including cpvc solvent cement for jointing complete all as specified and as directed.note :- (i) pipes inside the buildings shall be fixed concealed and outside thebuildings shall be fixed on the surface along wall with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, as directed by engineer-in-charge.(ii) bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on btd drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. 106 taking up or down steel tubing of 25 to 32 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by engr-in-charge. 107 s & f 40mm bore medium grade tube galvanised with all fittings and fixed complete concealed including groove cutting for concealing to walls & ceiling or laid in floor complete all as specified and directed by engineer - in - charge. 108 dismantling of cast iron pipes jointed in cement mortar and taking out from trenches walls etc upto 100 mm bore all as specified and directed by engr-in-charge . 109 supply & fixing 110mm bore upvc pipes grade b single socketed in any length with rubber ring joints, laid in trenches, joints fixed with pipe joint lubricant c complete all as specified and directed by engr-in-charge. 110 supply & fixing 75mm bore upvc pipes grade b single socketed in any length with rubber ring joints, laid in trenches, joints fixed with pipe joint lubricant complete all as specified and directed by engr-in-charge. 111 supply & fixing upvc junction (double t/socket) grade b equal or unequal suitable for 110mm bore pipe complete all as specified and complete all as specified and directed by engr-in-charge. 112 all as per item no 109 above 113 supply & fixing upvc bends (any radius) grade b suitable for 110mm bore pipe complete all as specified and directed by engr-in-charge. 114 all as per item no 111 above 115 supply & fixing upvc vent cowl grade b suitable for 110mm bore pipe complete all as specified and directed by engr-in-charge. 116 supply & fixing pvc vent cowl grade b suitable for 75 mm bore pipe complete all as specified and directed by engr-in-charge. 117 supply & fixing upvc grade b multi floor trap 110 mm bore and 600mm long with grating including jointing with with pipe joint lubricant complete all as specified and directed by engr-in-charge. 118 supply & fixing upvc grade b multi floor trap 75 mm bore and 600mm long with grating including jointing with with pipe joint lubricant complete all as specified and directed by engr-in-charge. 119 demolition of brick work built in cement mortar including all quoins, arches, pillars etc . 120 m&l for brick work with subclass‘b’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by engineer-in-charge. 121 labour only forbrick work built in cm (1:6) with subclass b bricks, straight or curved on plan exceeding 6m mean radiuswith reusing the old bricks obtained fromitem no 118 . 122 m&l for taking down carefully point wiring complete including fixture and fittings from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc and making good to disturbed area all as specified 123 m&l for point wiring complete with isi marked 1.5 sqmm single core pvc insulated unsheathed cable 1100v grade frls with multistranded copper conductor drawn through concealed in wall/ceiling surface and its accessories includingpvc rigid concealed conduit heavy duty suitable size with all accessories such as bend, reducers, ms hooks, ms junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switchs, sockets, fan regulator etc covered with 3 mm thick plastic laminated hylem top cover sheet of required color fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer includingfixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for the following all as specified 124 (a)one light point/fan point/exhaust controlled byone way switch 125 (b)one light point controlled by one two way switch 126 (c)one 5 pin socket out let 5 amps on the same board with other switches 127 (d)one 5 pin, 5a switch socket outlet point on independent board with other switches. 128 all as per item no. 02 here-in-before but with 2.5 sqmm cable for 1no 16 amps socket outlet point on independent board including 2.5 sqmm pvc insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor all as specified 129 s&f piano type switch single pole 1 way 5/6 amps 230 volt ac supply complete all as specified and directed by engr-in-charge. 130 s&f socket two in one 6/5 pin 5 amps230 volt ac supply complete all as specified and directed by engr-in-charge. 131 s&f piano type switch single pole 1 way 15/16 amps 230 volt ac supply complete all as specified and directed by engr-in-charge. 132 s&f piano flush type switch single pole 2 way 15 amps 230 volt ac supply complete all as specified and directed by engr-in-charge. 133 s&f socket two in one 6/5 pin 15/16 amps230 volt ac supply complete all as specified and directed by engr-in-charge. 134 s&f ceiling rose surface type, 65mm x 50mm three terminals, 3 phase / pvc / polycarbonate isolated body complete all as specified and directed by engr-in-charge. 135 s & f stepped type electronic fan regulator flush type on the existingphenolic laminated sheet etc. as reqd complete all as pecified and directed. 136 s&f lamp holder, pvc/polycarbonate type with back plate suitable for batten fittings with led bulb 09 watt complete all as specified 137 supply and fixing led lights fitting 20 w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 138 supply and fixing led light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 139 supply and fixing led street light fitting 35 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete. 140 s&f single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole mcb 20 amps capacity complete all as specified and directed by engr-in-charge. 141 s&f sheet metal enclosure for vtpn dbs 415 volts 08 way with 200 amps rated bus bar neautral link, earth bar double door with mccb as incomer complete all as specified 142 s&f sheet metal enclosure for vtpn dbs 415 volts 04 way with 200 amps rated bus bar neautral link, earth bar double door with mcb tpn as incomer complete all as specified and directed by engr-in-charge. 143 s&f sheet metal enclosure for dbs spn 230 volts 12 way with 200 amps rated bus bar neautral link, earth bar double door complete all as specified and directed by engr-in-charge. 144 supply and fixing 415v 16 ka 415 volts mccb of cap 100 amps following poles and current carrying capacity in the db complete with connection testing and commissioning. 145 supply and fixing 415v 10ka b curve miniature circuit breaker (mcb) tpn/4p of capacity 40 to 100 amps poles and current carrying capacity in the db complete with connection testing and commissioning. 146 supply and fixing 240v, 10 ka b curve miniature circuit breaker (mcb) of single poles and current carrying capacity 6 to 32 amp, in the mcb db complete with connection testing and commissioning complete all as specified and directed by engr-in-charge. 147 supply and fixing amp rating 240v, 10ka c curve miniature circuit breaker (mcb) of spn 40 to 63 amp and current carrying capacity in the mcb db complete with connection testing and commissioning complete all as specified 148 m&l forsubmain wiring comprising single core , 2 runs of 2.5 sqmm nominal cross sectional areamulti stranded copper conductor cable, pvc insulated unsheathed 1100 volts gradedrawing in and including appropriate dia. in surface/recessed pvc conduit and its fittings completeincluding provision of 1x2.5 sqmm nominal cross sectional areamulti stranded copper conductor cable, pvc insulated unsheathed 1100 volts grade as earthwire and using color code as per is and specified and making good all disturbed work to match the existing complete incl taking down old unsv sub main complete all as specified and directed by engr-in-charge. note :- (i)extra length of cables/ wire required for connection to mcbs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly.(ii) two run of wire, one run of earth wire and conduct shall be measured as one unit. 149 all as per item no 142 abovebut for single core , 2 runs of 4.0 sqmm nominal cross sectional area including provision of 1x4.0 sqmm nominal cross sectional area complete all as specified and directed by engr-in-charge. 150 all as per item no 142 above but for single core , 2 runs of 6.0 sqmm nominal cross sectional area including provision of 1x 6.0 sqmm nominal cross sectional area complete all as specified and directed by engr-in-charge. 151 m&l for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal gl connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washersand earth strip protected by 15 mm dia gi pipe medium grade and connected to main distribution board panel/earthing test point all as shown on electrical plate no.3 of ssr part i and all as specified including testing on completionincluding taking down old unserviceable earthing any type complete all as specified and directed by engr-in-charge. note :-gi wire 4mm dia including test point terminal box include in the quoted rate.

State Government

TRN :49059485 | 31 May, 2025

Tender Value : 70.47 Lacs

Vrindavan - Uttar Pradesh

Tender for tender for construction of rotary at different nodes-1, 2, 3 and 4 at vrindavan yojna, lucknow. - bituminous workdismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per technical specification clause 202. 2 providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical meansincluding supply of all materials, labour t&p etc. required for proper completion of the work as per mort&h specificationno. 502 (5.1)and as per dierction of the engineer in charge. 3 providing & laying dense graded bituminous macadam with hot mix 100-120 tph hot mix plant producing an average out put of 75 tonnes per hourusing crushed aggregate of specified grading, premixed with bituminous binder,@ 4.0 to 4.5 % weight of total mix and fillertransporting the hot mix to work site, laying with hydrostaticpaver finisher with sensor controller to requiredgrade, level & alignment & rolling with smooth wheeled vibratory and tandem rollers to achieved the desired compaction complete in all respects & as per relevant clauses of mort & h section-507 (vg-30) 4 providing & applying tack coat with bitumen vg-10using bitumen pressure distributor at the rate of 0.35kg/sqm on theprepared bituminous/granular surface cleaned with mechanical broomincluding supply of all materials, labour t&p etc. required for proper completion of the work as per mort&h specification and as per dierction of the engineer in charge. 5 providing & laying bituminous concrete 30 mm withhigher capacitybatch type hot mix plant producing an average out put of 75 tonnes per hourusing crushed aggregate of specified grading, premixed with bituminous binder,@5.4% weight of total mix and fillertransporting the hot mix to work site, laying with hydrostaticpaver finisher with sensor controller to requiredgrade, level & alignment & rolling with smooth wheeled vibratory and tandem rollers to achieved the desired compaction complete in all respects & as per relevant clauses of mort & h section-507 6 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 grms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35. the finished surface to be level, uniform and free from streaks and holes. 7 supply and fixing of pavement marker (cat eye) type x - astmd - 4956 - 04 avey dennison / 3 - m (usa make) consisting of asa plastic housing fitted with lightly adherent ploting compound. the housing cell contain prismatic two glass covered presmatic reflective fase to reflect incident light. (rpm with shank as per astm. dar 8.35 8 supply and fixing of monument forrotary including supply of all materials labourt & petc. required for proper complition of the work and as per direction by e/i. (m. r.) 9 retro-reflectivesheeting type-iv with 4 mm thick acm double side:providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with high intensity prismatic sheeting type iv as per irc-67:2012 retro reflective sheeting with back frame ms angle of 35x35x5 mm. legends, letters, numerals and borders etc should be as per morth specification no-801.3.7 the sheeting shall have a pressure sensitive adhesive of the aggressive-lack type requiring no heat. solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. the acm (aluminium composite materials) shall be fixed on the back frame ms angle with riveting. micro prismatic type iv retro reflective sheeting confirming to astm d4958-09 shall be pressure fixed. the retro reflective sheeling shall be lested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international government laboratory/ iristitute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad. aternatively, a certificate conforming to astm specification (d) 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally, in such a situation, the employer/client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67:2012 & proof of the same report shall be uploaded which quoting tender. the rate shall include all materiais, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. uppwd sor 2020-21 ch-26 s.i. no. 11 ref mort&h-801 10 providing and laying of trapezoidal hump/table top speed breaker as per drawing/design including all material, labour, t&p etc complete as per direction of e/i. 11 circular rotary and triangular islandearth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10sqm.on plan including getting out and disposal of excavated earth upto 50m and lift upto1.5m as directed by e/i. (uppwd sor s.i. no. ch.-7 s.l.-1 ref. dar 2.6.1)0.30m and above 12 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement, 4 coarse sand and 8 graded stone agreegate 40mm nominal size). (uppwd sor chap- 8, si no 1, ref to dar 4.1.8) 13 centering and shuttering including strutting, propping etc. and removal of form work for: foundations, footings, bases for columns(uppwd sor chap- 8, si no 3, ref to dar 4.3.1) 14 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1:1.5:3 (1 cement, 1.5 coarse sand and 3 graded stone agreegate 20mm nominal size). (uppwd sor chap- 8, si no 1, ref to dar 4.1.2) 15 m.s.iron work in plain work such as reinforced concrete or reinforced brick work wrought to required shape as necessory including bending for proper completion of the work. and including supply of steel its wastage bend hooks and authorised overlapping shall be measured. 16 finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade :new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg /10 sqm )(apex ultima weather coat all guard ) asian, berger also including providing and applying white cement based putty of averge thickness 1 mm of approved brand over the plasterd surface to prepare thesurface even and smooth complete as per direction by e/i. 17 providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, ivc fixing the railing with necessary accessories & stainless steel dash fasteners stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 18 filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. (uppwd sor s.l. no. 4 ref dar 2.25) 19 providing and laying of interlocking concrete block pavement having thickness 80mm as per drwaing and technical specification clause-1504 including earth work in excavation of required depth and width, providing, laying and compacting of w.m.m. and local sand for cussion of tiles etc also including supply of all material, labour, t&p etc complete.

corporations/Associations/Others

TRN :49065897 | 22 May, 2025

Tender Value : 37.31 Lacs

Mumbai Suburban - Maharashtra

Tender for tender for dd - mumbai city-marol mmr zone- i industrial area. m and r to nrb at udyog sarathi at marol. annual maintenance services for fire hydrant and fire alarm system, pa system for 2 years.; 1 providing annual maintenance services for maintenance of fire hydrant system with fire engine,fire alarmsystem,publicaddress system,includingproviding skilled technicalstaff,electrician,plumber, un skilled worker including day-to day maintenance; entire repairing of fire enginerepairsofelectricalpanels, relays, electrical motors. providing fieldtesting&givingdemonstration byevery15days;runningoffire engineeverysaturdayforatleast1 hour & running of pumpset for atleast 5 min/ day; maintenance of fire hydrant, wet risers, including their accessories like sluicevalves, maintaining name boards, signs, electrical data history sheets including every type of repairs in the firehydrantsystem including jockey pumps/booster pumps including safety,security, insurance etc. complete. 2 providing of skilled operator techniciansin fire control roomfor round o clock for a year operation & monitoring of hydrant system and fire alarm systems etc. complete. 3 servicing of all pumps including jockey, booster, engine pump including all removing & refitting, cleaning, rewinding motors if required, repainting, change of bearing etc. complete. the item includes following details. 1. dismantling of jockey, diesel engine pump, completely. 2. cleaning, oiling etc ofjockey, diesel enginepump complete. 3. replacement of bearing required as per capacity, replacement of gaskets or any other spares required.4. jockey, dieselengine pump/motorsetc. complete if required as per directions. 5. refitting jockey, dieselengine pump etc. complet e. item includes all material,spares, labours (skilled/unskilled), transportation,taxes etc. complete. 4 painting of electrical, mechanical machinery such as pumpsets, panels, motors, compressors, surge arrestors, transformers, ht & lt breakers, including rubbing down oil paint, cleaning with emery papers & makingthesurfacecleantoreceive the paints & providing & applying one coatofprimer & two coats of synthetic enamel painting conforming toisofapprovedcolour&shade, including scaffolding if necessary. 5 providing hydro testing, refilling, painting & labeling of fire extinguishers of following various types and capacities etc. complete. 6 dcp type 2 kg 7 dcp type 5 kg 8 abc type 5 kg 9 dcp type 10 kg 10 abc type 2 kg 11 co2 type 4.5 kg 12 water co2 type 9 ltr. 13 supplying and installing wall mounting swinginghose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (polyhose) alongwith necessary accessories complete as per specification no. ff-ffa/hv 14 supplying and erecting 63mm dia, reinforced rubber lined (r.r.l.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. ff-ffa/rrl 15 conventionalfirealarmsystem (ff-fas) 16 supplying, erecting testing and commissioning multi sensor (smoke+ heat) detector with base on back box, necessary connections complete asper specification no. ff-fas/msd 17 supplying, erecting testing and commissioningoptical type smoke detector on suitable backbox with necessary connections complete as per specification no. ff-fas/sd 18 supplying, installing, testing and commissioning2 zone, localsignal conventional control panel (lcp) with standard accessories complete as per specification no.ff-faas/lcp 19 supplying, installing, testing and commissioningfr, xlpe armoured cable 4 core 1.5 sq.mm.copper conductor complete erected on wall/ ceiling complete as per specification no. cb-lt/cu 20 fire extinguishers 21 supplying & erecting carbon dioxide (co2) fireextinguisher of 4.5 kg. capacity cartridge type conform to is 2878 /15683 complete erectedwith necessary clamp made from 50 x 6 mm. m.s. flat with nut & bolts routed in wall complete.

State Government

TRN :49033374 | 16 May, 2025

Tender Value : 0

Kashmir - Jammu And Kashmir

Tender for annual maintenance contract amc for civil/sanitary repairs to various assets of jktdc for the calendar year - providing/fixing of c.p. fittings of jaquar /cera / hindware or equivalent make including all leads lifts and carriages conmplete. 2 a.bib-cock/pillar cock/angle valve 15-mm dia 3 b. wall mixer/sink mixer/basin mixer 4 c. c.p. nipple 2/3/4/6 (1/2) 5 d. c.p.jet 6 f. health fucet 7 g.grating 8 h. p. v.c. connection(1/2) 12/18/24 9 i. c.p. coupling 10 j. bottle trap 11 k. c.p. showe with arm 12 l.glass shelf 13 m.soap case steel/glass 14 n. p.v.c corner shelf 15 o. pvc waste pipe 1/4,1/2 16 p. pvc siphon complete 17 q. pvcsiphon consolation complete 18 r. ¾’’+½’’ pvc siphon washels. 19 s. pvc flush handle 20 t. pvc seat cover plain/hydrolic 21 u. pvc seat cover consolation 22 v. pvc cistern 23 w. spandle (parko/ jaquar/cera). 24 x. gyzer bolt 25 y. connection washels 26 z. spandle washels 27 aa. mixer washels 28 bb.seat hinges normal 29 cc. seat hinges consolation 30 dd.pvc connection thread tape 31 ee.looking mirror with pvc frame 2-feet/ 2.5-feets 32 ff.mixer legpair 33 gg. towel rod 34 hh. towel ring 35 ii. paper holder 36 jj. angle value two in one 1.2 37 kk. water storage tank 38 ll. kitchen sink stainless steel 1.5-feet/2-feet 39 jj. brass ball cock 1/2,3/4/1-inch 40 providing/fixing of chinaware of standard quality includingcutting and making good the wall with all leads lifts and carriages complete. 41 a. english w.c/indian w.c 42 b. wash-basin 43 c. wash-basinpediatal 44 d. vanity wash basin of standard size 45 e. english w.c with cistern combined set (one piece set) 46 providing and fixing of pvc pipes of standard quality and fittings including all leads lifts and carriages complete. 47 a. 3/4 pvc pipes 48 b. 3/4 pvc plain bend 49 c. 3/4 pvc door bend 50 d. floor trap/master trap 3, 4 51 i. 12x12/ 18x18 hard plast pvc cover and frame 52 j. bottle trap 53 providing/fixing ofppr pipes and fittings ofapproved quality including all leads lifts and carriages complete. 54 a. 25-mm / 20-mm /32-mm dia ppr pipes 55 b. 25-mm/20-mm ppr fittings, elbow / socket / reducer/ tees/ 56 c. angle valve / gate valve of 25/20-mm dia 57 d. . 25 mm dia ppr plug 58 e.. 25 mm/20-mm adaptor (female) 59 f. 32 mm adaptor (female) 60 g. 25 mm 20-mm adaptor (male) 61 h.32 mm adaptor (male) 62 i.20 mm ball value 63 j.20 mm ,union 64 k. 25 mmunion 65 l. 32 mm ,union 66 m.40-mm ball valve 67 n.25 mm ball value 68 o.32 mm ball value 69 providing/fixing ofg.i piesfittings ofapproved quality including all leads lifts and carriages complete. 70 a. 15/20-mm dia g.i.pipe 71 b.25/40-mm dia g.i. pipe 72 c. g.i. fittings such as elbow/socket/tee/reducer (1, 1/2,3/4) 73 d. g. i. 15/20-mm ball valve /gate valve (25-mm/32-mm) 74 e. 1- hpmotor of standard quality 75 f.0.5- motor of standard quality 76 g.15mm dia20-mm dia - 25-mm dia union 77 h. 15 /20/25-mm dia(upto 600-mm nipple). 78 i. 15 mm cross over 79 j. 15 mm/ 25-mm tanki nipple. 80 k. 20 mm dia upto 600 mmlongnipple. 81 l. 20 /15 mm plug. 82 providing & fixing of hardware fitting and fixtures of m.s/ aluminium approved make including all leads lifts complete. 83 a. 3/4/5 hinges 84 b. 4/6/8 handle 85 c. 8- l-drop 86 d. 10/12-l-drop 87 e. 4/6 tower bolt 88 f. hydrolic door closer 89 g.door stopper 90 h. 6/8 i-hooks 91 providing/laying of cement concrete works in followinh mixes. 92 a.1:4:8 mix (1-cement : 4-sand: 8 graded strone agg). 93 b.1:2:4 mix (1-cement :2-sand: 4 graded strone agg). 94 c.1:3:6 mix (1-cement : 3-sand: 6graded strone agg). 95 d.1:1.5:3 mix (1-cement : 1.5-sand: 3 graded strone agg). r.c.c work only. 96 p/laying of laminated ac3 parquet flooring 6- mm thick with foam in floor including cost of cornice/side beading including cost of nails, fevicol with foamt- profile etccomplete. 97 dismantling of wooden flooring including frames/rails posts etc including stacking of serviceable material and disposal of unserviceable material, both lead upto 50-mt. 98 providing & fixing of wooden flooring made up ist class deodar wood including fixed with nails & providing of other required accessories all complete.( 40-mm thick). 99 wood work in trusses purlins rafter of 1st class budloo wood/fir woodor equivalent incl. hoisting fixing with nails etc. 100 provioding/ fixingof door window shutters glazed/panelled 1st class kailincluding cost of nails etc complete of required thickness excluding panelling / glazing which will be paid seperately 101 providing/fixing of galvanised ms wire gauze of average width with wire of dia 0.63 mm for doors, windows wherever required including all carriages and cost of other materialsviz beading complete. 102 re-enforcement for rcc work including straightening cutting, bending, placing in position and binding all complete including all carriages of tmt bars (thermo-mechanically treated bars). 103 providing and fixing of panellingor panelling and glazing for panelled or glazedshutters for doors, windows 104 a. kail wood 105 b. 4-mm thick glass 106 providing wood work in frames of door, window, chowkhats and other frames wrought framed and fixed in position with hold fasts, lugs or with dash fasteners of required dia and length first class kail wood. 107 providing/fixing of weather boarding 20-mm thick of first class kail wood plank including cost of frame work if any for making even surface where ever required complete job. 108 providing and fixing ofwire gauzeshutters using galvanized m,s. wire gauze of average width for aperture 1.4-mm in both the directionswith wire of dia 0.63 mm for doors, windowswith isi marked m.spressed butt hinges bright finished ofrequired sizewith necessary screws as directed .using first class kail wood. including all carriages and cost of other materials complete. 109 supply & fixing of 12-mm thick foam complete including adhesive . 110 dismantling of cement concrete / r.c.c work including disposal of excavated material upto 1-km lead complete. 111 providing & fixing of all sorts of tile/marble/ granitework in 1:4-mix (1-cement 4:sand) over a bed of 20-mm thick cement mortar complete. 112 b. glazed/ceremic tiles 113 c. cement concrete tiles 114 e.. 20-mm thick marble work 115 f. 16-mm thick granite flooring work 116 engagement of skilled / semi skilled man power as under:- 117 a. massion 118 b. carpentor 119 c. plumber 120 d. welder 121 e.blacl smith 122 f.drain cleaner 123 g. sweeper 124 h.labour 125 i. . skilled labour 126 p/fixing of stainless steel alimarah. 127 stainless steel curtain rods including brackets, side balls, screws etc complete job. 128 p/fixing of 12 mm ply including frame work. 129 p/fixing of 10 mm ply including frame work. 130 p/fixing of 19 mm ply including frame work. 131 p/fixing of 8-mm ply including frame work. 132 p/fixing of nodic panelling including frame work. 133 p/fixing of 12 mm thick mdf including frame work.single side laminated (ssl). 134 p/fixing of 6 mm thick mdf including frame work. single side laminated (ssl). 135 p/fixing of 1’’ to 3’’ width cornices of approved material. 136 p/fixing of colour coated cgi sheet roofingof 0.50-mm thick including nails, washels, etc complete job. 137 providing/fixing of 3.5-mm to 5-mm ordinary glass sheets for window paines including cost of beading etc complete. 138 earth work excavationin trenchs/foundation footingsin all kinds of soil including disposal of surplus soil and re-filling of the soil as required at site. 139 constructionof cement concrete manholes including dismantling of existing defunct slab, walls, in cement mortar 1:4 (1 cement 4 coarse sand) rcc top slab/walls with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate) foundation concrete 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) side plaster 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand) finished with floating coat of neat cement. size of main hole upto 600 x 600x450 -mm , including top made of cast iron frames with cover. complete job including carriage of required materialsfrom source to site, including all leads , lifts and headloads etc. 140 providing and applying 12-mm/15-mm cement plaster interior / exterior in 1:4-mix complete. 141 providing/fixing of msholdfasts of required size. 142 repair to iron workby way ofnecessary correction including requisite material weilding etc complete job . 143 structural steel work in built of section including bending, wielding, cutting, and primer coat in trusses fencing etc complete job. 144 dismantling of wall tiles/granite/ plaster including disposal of excavated material upto lead as directed complete. 145 prividing/applying of following painting / priming / snowcem/ touch wood and polishing items. 146 a. primer red oxide on steel / wood work 147 b. synthetic enemal paint two or more coats 148 c. snowcem two or more coats 149 d.touch woodtwo or more coats 150 e.plastic emulsion two or more coats 151 f. ready mixed paint two or more coats 152 g.washable oil bound distemper two or more coata

Central Government/Public Sector

TRN :49021106 | 21 May, 2025

Tender Value : 1

Mysore - Karnataka

Tender for tender for providing architectural, design consultancy including project management services for construction of multipurpose building and trainee hostel with vip transit house building at beml township, mysuru; 1 basic engineering shall include topographic survey, complete building layout and plan for both the buildings (multipurpose building & trainee hostel with vip transit house) with suitability to cater the required facility & 3d walk through presentations. 03 (three) different optional layout plans in 2d with elevations, shall be presented for discussion & approvals from beml. 3d walkthrough presentations to be made for approved /corrected option. the selected one option shall be used for detailed design and execution. i) 15 days from scheduled date of commencement of work for submission of building layouts in 2d 20% of the total quoted amount shall be paid on completion of jobs mentioned at sl. nos (i) & (ii) (ii) 21 days from the date of acceptance of plant layout by beml for submission of 3d walk-through presentation. 2 soil testing and borewell points: (i) conducting soil testing in both the locations by a reputed agency and submission of the report. (ii)hydrogeological investigation for identification borewell points on both the locations and submission of the report. 30 days from the date of commencement mentioned in the po. 10% shall be paid after completion of soil testing and submission of report 3 complete design / calculations & detailed engineering for multipurpose building & trainee hostel with vip transit house sufficiently rigid to take wind & seismic load as applicable in that area and shall also include analysis and design of civil, architectural and structural for foundation structures, drainage system, roads, waste water treatment plants, firefighting system, mechanical works like interiors, air-conditioning, furniture, electrical works including substation, dg set, dg room, & allied required works, utility services pump house, ug sump, oht, rain water harvesting, garden , drinking water system, sanitary lines, office area, material store etc., complete for all that is required as per the required mentioned in the page 13 and 14. the above description is for information purpose and beml ltd., may add or delete additional utilities, facilities, during the tenure of the project. the green building concept may be opted in the design, wherever applicable. preparation and submission of estimates based on latest mes ssr & market rates, boq, detailed specification and assisting m/s beml ltd., for finalization of contract for execution. 4 liasoning works: i)preparation & submission of all relevant documents and obtaining approvals/license from mysuru city corporation authorities, forest department, electricity board, or any statutory approval from govt. bodies/quasi/local acts as required before starting of project and after completion of the work for completion of the project in all respects. note: beml ltd., shall pay all the statutory fees/payments as applicable to the concerned agencies / departments on production of documentary proofs. concurrent activity 10% of the total quoted amount shall be paid on submission of the approvals/license from the statutory bodies before execution. 10% of the total quoted amount shall be paid on submission of the approvals/license from the statutory bodies after completion of the project. 5 third party design certification: preparation & submission of all relevant documents and obtain approvals from third party certification for structural design calculations from iit’s/iisc. concurrent activity 10% of the total quoted amount shall be paid on submission of the certification report. 6 project monitoring: preparation and release of good for construction drawings, 3d views for interior works (as hard copies and soft copy -03 copies), preparation of pert chart activity wise using software and monitoring of weekly progress by submitting the progress report. the consultant has to verify, certify the quality and quantities or any relevant document essential for the rar & final bills claimed by executing contractor/s before those bills are submitted to beml ltd., the consultant has to prepare/certify deviation order, rate analysis for non-tender items, if any and completion certificate for executing contractor/s.

corporations/Associations/Others

TRN :49022887 | 29 May, 2025

Tender Value : 2.62 Crore

Jagdishpur - Uttar Pradesh

Tender for annual maintenance works at i.a. jagdishpur distt. amethi. - providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 2 providing and applying primer coat with bitumen emulsion/ vg-10 on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.including supply of all materials, labour and t&p etc. required for proper completion of the work. 3 providing and laying densed gradded bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 4.50% by weight of total mix and filler, transporting the hot mix material to work site, laying with a hydrostatic paver finisher with sensor control to the required grede,level and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per mort&h specificationsclauses507 complete work in all respects. including supply of all materials,labour,t&p etc as required for proper completion of the work. 4 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.including supply of all materials, labour and t&p etc. required for proper completion of the work. 5 providing and laying 25mm thickbituminous concrete with higher capacity batch typehot mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 5.20 % percent of mix and filler ,transporting the hot mix material to work site , laying with hydrostatic paver finisher with sensor control to the required grade ,level and alignment ,rolling with smooth wheeled , vibratory and tandem roller , to achieve the desired compaction as per mort&h.. specification clause no - 507, complete in all respect. ( grading -i ) 6 road marking with hot applied thermoplastic compound with reflectoringmglass beads on bituminous surface,providing and laying of hot applied thermoplastic compound 2.50mm thick including reflectoring glass beads @ 250 gms per sqm area, thickness of 2.50mm is exclusive of surface applied glass beads as per irc :35.the finished surface to be level uniform and free from streaks and holes. rate as per uppwd. 7 earth work in excavation by mechanical means/manual means over areas including getting out and disposal of excavated earth lead upto 50m and for all lift for all kinds of soil. 8 m-150 brick workin foundation and plinth in cement mortar 1:6 with cement and coarse sand. 9 12 mm thick cement plaster of mortar 1:4 with cement and coarse sand on brick work. 10 providing & laying in position cement concrete of grade 1:5:10 with cement, coarse sand and 40 mm grade stone aggregates. 11 providing and laying 80 mm thick factory made chamfered edge cement concrete paver blocks of m-35 grade with approved colour, design and pattern ,thickness & size / shape complete item no 16.91.2 12 m-150 brick workin plinth and foundation with cement mortar 1:4 with cement and coarse sand. 13 providing and fixing concrete 1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)on culvert parapet as per standard design,including finishing smooth with cement mortar . 14 finishing walls with water proof cement paint of approved make and quality on new work with 2 coats to give an even shadeincluding supply of all materials, labour and t&p etc. required for proper completion of the work. on culvert parapet 15 repairing of 110 mm dia water supply line leakages including cost of earth work excavation, bailing out water,supply of pipe, d-joint ,nut bolts and specials etc.as required at site condition complete sa per direction of engineer in-charge. 16 repairing of 160 mm dia water supply line leakages including cost of earth work excavation, bailing out water,supply of pipe, d-joint ,nut bolts and specials etc.as required at site condition complete sa per direction of engineer in-charge. 17 providing and laying of 100 mm dia pvc pipe as per code specifications including cost of all material ,specials, excavation of earth work,all labour t&p etc ,testing of pipe line as per requirement complete 18 providing and laying of 150 mm dia pvc pipe as per code specifications including cost of all material ,specials, excavation of earth work,all labour t&petc,testing of pipe line as per requirement complete 19 repairing and rewinding of motor,repairing of pump accessories complete including cost of all material,labour ,t&p etc as required at site condition also including lowering & lifting of motor pump from tubewell boring testing complete. 20 repairing of electric control panel 21 manual sweeping ,garbage/litter collection and removal of animal carcasses etc in all streets,main and arterial roads all street and roadsurfaces, footpaths, pavements, parking, lots, foot, overbridges, busshelters, roadmedians, traffic islands and any other open public areas and structures outing. 22 cleaning & removal of garbage, litter, silt or any blockages from the street side, shallow surface drains(other than under ground sewerage and under ground drains) including tractor with trolly, its pol & driver, 2 nos helper for loading/unloading of garbage, etc . complete item as per direction of engineer in charge. 23 desilting of drain in foul position (work frequency every week ) including disposal of silt/waste out side of industrial area as per direction of engineer in charge. 24 clearing jungle i/c uprooting of rank vegetations, grass, bush, wood trees and saplings of girth upto 30cm measured at a height of 1m above ground level & removal of rubbish upto 50m.

Government Departments

TRN :49028133 | 21 May, 2025

Tender Value : 7.73 Lacs

Agra - Uttar Pradesh

Tender for tender for zone-3 tajganj zone room no.-77 patch repair work by hotmix on the road of chamrauli pushp praful nagar and nikhil garden. - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (22.40-53mm) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber. applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. 2 providing and applying primer coat with ssi grade bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. (as per attached analysis) 3 providing and laying dense graded bituminous macadam with higher capacity batch type hmp using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 505 complete in all respects including cost of all materials, t&p, labour, cartage for proper completion of work as per direction of enginee-in-charges. (20-chapter analysis rate) 4 providing and laying bituminous concrete (grading-11) with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder vg-30 as per approved job mix formula which ever is higher of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification sth revision clause no. 509 complete in all respects including cost of all materials, t&p, labour, cartage for proper completion of work as per direction of enginee-in-charges. (20-chapter analysis rate) 5 banking excavated earth by mechanical /manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with % tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and for all kinds of soil. (chapter no.2 code-2.3 page no. 91) 6 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:5:10 (1 cement: 5 coarse sand (zone-iii) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources etc all complete. (chapter no.4 dsr code-4.1.10 page-103) 7 providing and fixing pvc pipe conforming to 86.00 isi make working pressure 6 kg/cm including testing labour t&p etc. all complete. 140mm diameter. (chapter no.23 sl.no. 30(iv)) 8 constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1) cement: 4 coarse sand) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and rcc top slab 1:1.5:3 mix (1 cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design with common burnt clay f.p.s.(non modular) bricks of class designation 7.5 (chapter no.18 dsr code-18.34.1 pg-286) 9 supply & fixing r.c.c menhole cover heavy duty size etc. all complete. (non scheduled) 10 sub total (a) 11 add/deduction rs. for estimate figure amount match 12 grand total

State Government

TRN :49005623 | 26 May, 2025

Tender Value : 18.56 Crore

Jayal - Rajasthan

Tender for tender for widening and strengthening on kasnau (sh-92a) to dehri - tarnau - merwas - upto mataji road - 1 part a road work clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of non-thorny jungle 2 excavation in soilwithdozer with lead upto 100 mexcavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. 3 construction of embankment with material obtained from roadway cuttingconstruction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of tables 300-1 and 300-2 as per morth specification clause 305.3 4 construction of embankment with material obtained from borrow pitsconstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3 5 granular sub-base with well graded material (table 400-1)by mix in place methodconstruction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesired density, complete as per morth specification clause 401. for grading iiimaterial 6 crusher run macadam baseproviding crushed run stone aggregate greading conforming to table 400-14 depositing on a prepared surface by hauling vehicles, spreading and mixing witha motor grader, watering and compacting with a threewheel 80-100 kn static roller as per morth specification clause 407 to form a layer of sub-base/base by mixing plant method with 53 mm maximum size of aggregates 7 wet mix macadamproviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead 8 prime coatproviding and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502 9 tack coatproviding and applying tack coat with bitumen emulsion (rs-1)using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503. 10 tack coatproviding and applying tack coat with bitumen emulsion (rs-1)using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per morth specification clause 503. 11 providing and laying dense graded bituminous macadam with 100-120 tph batch type hmp producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 percentby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specifications clause 505 complete in all respects. bitumen (vg-30)grading - ii (26.50 mm (nominal size)) 12 providing and laying bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler,transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specifications clause 507 complete in all respectsfor grading-ii(13 mm nominal size) bitumen (vg-30) 13 providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510.by mechanical means bitumen (vg-30) 14 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511type b bitumen (vg-30) 15 part b c.c. pavement work dry lean cement concreteconstruction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. 16 construction ofun-reinforced , plain cement concrete pavement m-40 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cementas per clause 602.2.2 , coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a in fullyautomatic batching plant andtransported to site intransit mixer for having continous agitated mixer, manufactured as per approved mix designincluding pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using fixed form paver and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawingand morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). 17 providing and fixing of dowel bars of mild steel confirming to is : 432 of specified length and diameters as per morth specification irc 15 & 58 including cutting, placing in position across transverse joint with proper spacing, providing with pvc sleeve complete as per drawing, technical specification and as per direction of the engineer-in-charge. 18 part c protection wallearthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. ordinary soil upto 3 m depth 19 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 20 stone masonry work in cement mortar in foundation complete as per drawing and morth specifications clauses 1402, 1405, 2102 & 2104. random rubble masonry in 1:6 cement mortar 21 plastering with cement mortar (1:4), 20 mm thick on stone work. 22 providing pcc m-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and morth specification clauses 1313, 1411 and 2206.650 mm thick 23 part d c.d.workearthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. ordinary soil upto 3 m depth 24 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 25 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c. grade m 20nominal mix (1:2:4) 26 providing and fixing stone slab covering over drains (kota/bijoliya quarry) having thickness 75 mm to 150 mm including filling of joints in cement mortar 1:3 with 50 mm thick cement concrete flooring in 1:2:4 mix complete with good finish as per approved drawings and specifications.for drain opeining size 300 to 450 mm stone patty drain cover size 800mm x 600mm x 75mm 27 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 28 providing and laying reinforced cement concrete pipe np3 as per design in single row providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets clause 2905. 29 600 mmdia 30 300 mm dia 31 part f road saftykilometrestonereinforced cement concrete m15grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and morth specification clause 801 32 5th kilometre stone (precast) 33 ordinary kilometer stone (precast) 34 200 m stone (precast) 35 traffic signsretro-reflectorised traffic signsproviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on gi pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 36 600 mm equilateral triangle 37 600 mm circular 38 600 mm x 450 mm rectangular 39 900 mm side octagon 40 direction and place identification signs upto 0.9 sqm size boardretro-reflectorised traffic signsproviding and erecting direction and place identification retro-reflectorised sign asper irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1. fixed over aluminium sheeting, 2 mm thickwith areanot exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and morth specification clause 801. direction and place identification signs upto 0.9 sqm size board 41 direction and place identification signs with size more than 0.9 sqm size boardretro-reflectorised traffic signsproviding and erecting direction and place identification retro-reflectorised sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1, fixed over aluminium sheeting, 2 mm thickwith areaexceeding 0.9 sqm supported on dia gi pipe firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and morth specification clause 801 42 marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160 c with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. 43 supplying and fixing of cat’s eye made of aluminium alloy size 75x100x22 mm having 21 biconvex lenses embedded in circular disk of abs plastic on each side. 44 providing and fixing mukhya mantri sadak yojana/ mahatma gandhi rajya sadak yojana informatory sign board with logo for roads funded by state road fund having m.s. definition plate of 1.60 mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast including paint logo as per approved design and colours. the logo shall be made out of 1.6mm thick circular plate duly framed with ms angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. the size of definition plate shall be 1500x600mm and embedding the posts by m-15 cement concrete block45 cm x 45 cm x 60 cm, 60 cm below ground levelincluding lettering / writing and painting etc. complete in all respect.as per morth specification clause 801. 45 supply of swiss type of hazard marker, made out of 2 mm thick m.s. sheet size of box is 15x15 cm with hold fast at bottom, the body is painted in orange stoving enamel paint with white/high intensity grade micro-prismatic type sheeting, on all four side.

State Government

TRN :48961517 | 21 May, 2025

Tender Value : 4.69 Crore

Jayal - Rajasthan

Tender for construction of sankhwas bypass--1 part a road work boundary pillar reinforced cement concrete m15 grade boundary pillars/local stone of standard design as per irc:25, fixed in position including finishing and lettering but excluding painting as per drawing and morth specification clause 807 2 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of non-thorny jungle 3 excavation in soilwithdozer with lead upto 100 mexcavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. 4 construction of embankment with material obtained from borrow pitsconstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3 5 carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. 6 crusher run macadam baseproviding crushed run stone aggregate greading conforming to table 400-14 depositing on a prepared surface by hauling vehicles, spreading and mixing witha motor grader, watering and compacting with a threewheel 80-100 kn static roller as per morth specification clause 407 to form a layer of sub-base/base(b) by mixing plant method(i) with 53 mm maximum size of aggregates 7 granular sub-base with well graded material (table 400-1) by mix in place method construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesired density, complete as per morth specification clause 401.for grading iiimaterial 8 wet mix macadamproviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead 9 prime coatproviding and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502 10 tack coatproviding and applying tack coat with bitumen emulsion (rs-1)using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503. 11 providing and laying dense graded bituminous macadam with 100-120 tph batch type hmp producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 percentby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specifications clause 505 complete in all respects. bitumen (vg-30) grading - ii (26.50 mm (nominal size)) 12 providing and laying bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler,transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specifications clause 507 complete in all respects for grading-ii(13 mm nominal size) bitumen (vg-30) 13 part b protectionearthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. ordinary soil upto 3 m depth 14 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 15 stone masonry work in cement mortar in foundation complete as per drawing and morth specifications clauses 1402, 1405, 2102 & 2104. random rubble masonry in 1:6 cement mortar 16 providing pcc m-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and morth specification clauses 1313, 1411 and 2206.650 mm thick 17 plastering with cement mortar (1:4), 20 mm thick on stone work. 18 providing and laying reinforced cement concrete pipe np3 as per design in single row providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets clause 2905. 19 600 mmdia 20 300 mm dia 21 providing and laying precast reinforced cement concrete box culvert section of m-40 grade designed for aa class loading as per irc specifications including to effect of impact, eq etc. complete on firm base of 200mm thick lean concrete of m-10 grade with aggregate of size 40mm nominal of following internal size the work includes required safety measures cost of design of rcc precast box and its proof checking from iit / nit / government engineer college complete in all respect as per specifications size 1.00 m x 1.00 m 22 part c road furniturekilometrestonereinforced cement concrete m15grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and morth specification clause 801 23 5th kilometre stone (precast) 24 ordinary kilometer stone (precast)

State Government

TRN :34438665 | 10 May, 2025

Tender Value : 0

Pithoragarah - Uttaranchal

Tender for capital maintenance work of electro-mechanical equipment and power house of 2x300 kw capacity taleeshwar hydroelectric project

1
2

Related Searched Keywords : hydro mechanical work

Get hydro mechanical work Tender Alert...

Related Searched Keywords : hydro mechanical work

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

Copyright ©2018 - Thetenders.com. Read Policies