Filters

List of aviation-equipment Tenders

List of latest aviation-equipment Tenders in Indian Tenders. Click on any aviation-equipment Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for aviation-equipment Tenders.

All-Tenders (79)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35518706 | 07 Oct, 2025

Tender Value : 1.42 Lacs

Chandigarh Ut - Chandigarh

Tender for comprehensive annual maintenance of electromechanical equipment suitable for goods/parcel etc. to raise /lower from ground floor to first floor at hpo bldg. ferozepur for fy 2025-26

Central Government/Public Sector

TRN :35523941 | 02 Dec, 2025

Tender Value : 0

New Delhi - Delhi

Tender for procurement of spares for il-78 aircraft

Central Government/Public Sector

TRN :35513452 | 08 Oct, 2025

Tender Value : 0

Jalandhar - Punjab

Tender for gem bids for professional painting service - painting of equipment;na; ground equipment /

Central Government/Public Sector

TRN :35514653 | 22 Oct, 2025

Tender Value : 0

Angul - Orissa

Tender for gem bids for online ups v2 q2 area gm within 30 days after completion of supplies and acceptance of material by the consignee. all central/state government organization/psus shall be exempted from submission of security deposit. oem/oes shall also be exempted from submission of security deposit in case of procurement of spare parts forequipment against single tender enquiry/open/ limited tenders. submission ofsecurity deposit is exempted for the contracts having value up to rs.2 lakhs. the sdbg will be submitted through structured financial management system sfms. gst shall be applicable on security deposit forfeiture and will be extra and recovered from suppliers/bidders.8. the bidder has to submit bis certificate for ups with battery.9.performance guarantee: the successful bidder shall be required to furnish a performance guarantee equivalent to 10% value of the total landed value of the contract including all taxes, duties and other costs and charges, without considering input tax credit. the performance guarantee shall be in the form of a bank demand draft or in the form of a bank guarantee in the prescribed formatthe pbg will be submitted through structured financial management system sfms.a. the performance guarantee shall remain valid till 3 months after the completion of warranty period.b. the performance guarantee shall be submitted su ciently in advance say3-4weeks to enable its veri cation from the issuing bank, before submission of the invoice for payment of the particular goods/equipments.c. the release of the performance guarantees after above indicated period, shall be subject to satisfactory performance of the equipment/ items during the warranty period and ful lment of contractual obligations failing which, action for further extension or encashment of pbg, as deemed suitable shall be taken. the performance bank guarantee shall be released after expiry of validity period if no claim is pending, with the approval of the concerned cms, i/c., ch area. d. in cases where the supplier does not submit the performance guarantee in time or as per the prescribed format in line with the contract stipulations, the performance guarantee amount may be deducted from the rst bill or in case of insu cient amount, from subsequent bills of the supplier till the full performance guarantee amount is deducted. this amount shall be refunded to the supplier upon acceptance of performance guarantee submitted by them. e. gst shall be applicable on performance guarantee forfeiture and will be extra and recovered from suppliers/bidders.performance bank guarantee format................................................ name& address of the purchaser................................................ company9 / 28 re: bank guarantee in respect of agreement dated ................ day of ...... 20 ............... between... . ........................ name of purchaser companyand.......................... name ofsupplier company messers............................................... a company / firm having its office at no. . . . . . . . . . . . . . . ... . . . . . . . . . . . . .. . . . . . . . . . . . . .. . . . . . .hereinafter called the contractor has entered into anagreement dated .................... hereinafter called the said agreement with ........................... name of the purchaser company hereinafter called the company to supply ................ stores/materials amounting to rs................................... on the terms and conditions contained in the said agreement.it has been agreed that ................................... ......... percent payment o f the value of the stores/materials will be made to the contractor in terms of the said agreement on the contractors furnishing to the company a bank guarantee for the sumof rs............................................................................................................................... as security for due repayment of the said sum in terms of the said agreement, and also interest as therein provided.the...................... name of the bank having its o ceat............................................... has at the request of the contractor agreed to give the guarantee as hereinafter containedwe ......................................... name of the bank herein after called thebank do hereby unconditionally agree with the company that if the contractor shall in any way fail to observe or perform the terms and condition of the said agreement regarding repayment of the said sum of rs .......................... or any of them including the term for payment of interest for delay in deliveries or shall commit any breach of its obligations there under, the bank shall on demand and without any objection or demurpay to the company the said sum of rs........................................................................................ or such portion as shall then remain unpaid with interest without requiring the company to have recourse to any legal remedy that may be available to it to compel the bank to pay the same, orcalling on the company to compel such payment by the contractor.any such demand shall be conclusive as regards the liability of the contractor to the company and as regards the amount payable by the bank under this guarantee. the bank shall not be entitled to with hold, payment on the ground that the contractor has disputed its liability to pay or has disputed the quantum of the amount or that any arbitration proceeding or legal proceeding is pending between the company and the contractor regarding the claim.we, the bank- further agree that the guarantee shall come into force from the date hereof and shall remain in full force and e ect till the period that will be taken for the performance of the said agreement which is likely to be the....day of............................................................................................... but if the period of agreement is extended either pursuant to the provisions in the said agreement or by mutual agreement between the contractor and the company the bank shallrenew the period of the guarantee failing which it shall pay to the company the said sum of rs................or such lesser amount out of the said sum of r s............................................ as may be due to the company and as the company may demand. this guarantee shall remain in force until the dues of the company in r10 / 28 espect of the said sum of rs and interest are fully satisfied and the company certifies that the agreement regarding re-payment of the said sum of rs has been fully carried out by the contractor and discharges the guarantee.the bank further agrees with the company that the company shall have the fullest liberty without the consent of the bank and without affecting in any way the obligations hereunder to vary any of the terms an d conditions of the said agreement or to extend the time for performance of the said agreement from time to time or to postpone for any time or from time to time any of the powers exercisable by the company against the contractor and to forbear to enforce any of theterms and conditions relating to the said agreement and the bank shall not be relieved from its liability by reason of such failure or extension being gran ted to the contractor or through any forbearance, act or omission on the part of the company or any indulgence by the company to the contractor or any other matteror thing whatsoever which under the law relating to sureties would but for this provisions have the effect of relieving or discharging the guarantor.the bank further agrees that in case this guarantee is required for a longer period and it is not extended by the bank beyond the period speci ed above the bank shall pay to the company the said sum of rs or such lesser sum as may then be due to the company out of the said advance of rs... and as the company may require.notwithstanding anything herein contained the liability of the bank under this guarantee is restricted to rs....... . only. the guarantee shall remain in force till the .......... day of .............. and unless the guarantee is renewed or a claim is preferred against the bank within 3 months from the said date all rights of the company under this guarantee shall cease and the bank shall be released and discharged from all liability her eunder except as provided in the preceding clause.the bank has under its constitution power to give this guarantee and ........... name of the person who has signed it on behalf of the bank has authority to do so.the details of beneficiary bank for sending details of bg under sfms platform is furnished below. name of the bank: - .......... .branch: - ............ .ifsc: - ............ ..a/c no: - ........... .customer id : ......... .dated this ................ day of ....................20 .. .place ........................................ . 11 / 28 signature of the authorized person for and on behalf of the bank~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 10.the scanned copies of the following con rmatory documents shall be submitted by bidder:a provenness criteria:sl.no.alternative provenness criteriascanned copy of documents to be uploaded by the bidder in support of information declarationfurnished online by the bidder against provenness criteria as confirmatory document self certified copy the tendered item must havebeen supplied during the last 5 years from the date of tender opening to any government/public sectoru ndertakings indigenous or global or any private industry indigenous orglobal, . please note that the orders should not be older than five 05 years from the date of opening of tender. uploaded orders older than 5 years from the date of opening of tender shall be ignored.no new supply orders shall be accepted during recycling of shortfall documents. therefore bidders must be careful whileuploading supply order copies onlineandeither, having satisfactory performance report from the user for a period of not less than 01 yearor the bidder will be required to furnish a self- certificate both the following documents a and bi or biia. complete set ofsupply orders firmcopies for the tendered item. the age of orders uploaded shall be maximum 5 five years from the date of opening of tender for the purpose of determination of provenness of the product offered by a bidder.please note that the orders should not be older than five 05 years fromthe date of opening of tender. uploaded orders older than 5 years from the date of opening of tender shall be ignored.andb. any of the following:i. satisfactory performance report from the users for a period of not lessthan 01 year from the date of fitment/commissioning.orii. the bidder will be required to furnish a self-certificate to the following extent along with proof of payment against the purchase orders/rate contracts :12 / 28 to the following extent along with proof of payment againstthe purchaseorders/ rate contracts:: the items covered in the purchase orders/ rate contracts copies enclosed with our offer have been fully executed and have performed satisfactorily as per the provisions of respective purchase orders/ rate contracts and all the complaints/ claim s lodged by the purchaser, if any, have been attended to and no complaints/ claimss are pending.note: the supplies must be completed at least twelve months prior to last date of tender submission. the items covered in the purchase orders/ rate contracts copies enclosedwith our offer have been fully executed and haveperformed satisfactorily as per the provisions of respective purchase orders/ rate contracts and all the complaints/ claim s lodged by the purchaser, if any, have been attended to and no complaints/ claimss are pending.note: the supplies must be completed at least twelve months prior to last date of tender submission.no new supply orders shall be accepted during recycling of shortfall documents. therefore bidders must be careful while uploading supply order copies online iiif the bidder is a startup or micro & small enterprise msesfor the tendered items to be offered by thema certificate issued by dipp department of industrial policy & promotion for being startup or certificate issued by authorities for being mse andb any one of the following documents attested by public notary:- valid isi marking license / dgms approval certificate for the offered item or rate contract issued by cil/ any other subsidiary for the offered item or proven ancillary certificate issued by mcl for the offered item notarized. or filled up proforma for equipment and quality control as per annexure-a for verification of your technical capability by concerned technical department. 13 / 28 c other qualification criteria: all the following specified documentssl.no.other qualification criteriascanned copy of documents to be uploaded by all the bidders in support of other eligibility criteriapreferably self certified copy01certificate of local contentformat at annexure-hself-certification from manufacturer/ oem indicating percentage of local content & that the item offered meets the local content requirement for class-i local supplier / class-ii local supplier as the case may be along with details of locations at which the local value addition is made. note:i. non-local supplier with offered item having local content less than or equal to 20%are not eligible to bid in this procurement.ii. bidders offering imported products will fall underthe category of non-local suppliers. they can t claim themselves as class i local supplier/ class ii local supplier by claiming profit, warehousing, marketing, logistics, freight, after sales service support likeamc/cmc etc as local value addition14 / 28 lowest price certificateformat at annexure-kbidder shall submit lowest price certificate as under: we certify that the prices quoted in the tender are the lowest and not higher than as applicable to any organization / ministry / department of the govt. of india or coal india ltd. and/or its subsidiaries or other psu or any other private organization. annexure-aproforma for equipment and quality controlreference : cil/subsidiary co. gem bid no. date for supply of 1. name and address of the firm2. a telephone no. office/factory/worksb e-mail id3. location of manufacturing works/factories owned by the rm documentary evidence of ownership must be produced.4. brief description of the factory i.e. area covered accommodation, department into which it is divided, laboratory etc.5. details of plant and machinery erected and functioning in each department monographs and description pamphlets be supplied if available.6. whether the process of manufacture in the factory is carried out with the aid of power or without it.7. process flow charts for the whole manufacturing process of the tendered item.8. details and stocks of raw materials held.9. production capacity of items quoted for with the existing plants and machinerya normalb maximum10. details of quality assurance plan and quality control infrastructure such as laboratories etc.11. a details of technical supervisory sta in-charge of production and quality control.15 / 28 b skilled labour employed.c unskilled labour employedd maximum number of workers skilled and unskilled employed on any day during 18 months preceding the date of application.12. whether stores were tested to any standard speci cation, if so, copies of original test certificate should be submitted in duplicate. signature of tenderer nb: details against sl. nos. 5 to 12 inclusive need be restricted to the extent they pertain to the items underannexure-b m/s. mcl, addressdear sirsub: gem bid no.:authorization & undertaking certi cate by manufactureron letter head of the principal / manufacturerwhereas we, m/s name of manufacturer who are established and reputable manufacturers of tendered/o ered items having factories at andaddresses of factoryies, do here by authorize m/s name & address our agent to submit the bid and execute the resultant contract with you on our behalf against the above tender.we, m/s name of manufacturer also undertake the following:i that, as a matter of our corporate policy, we don t directly quote / market our products and if, subsequently, at any stage, it is found that we have quoted directly to any organization, we shall be liable for penal action asper provisions. further, if at any stage, it is found that agency commission has been paid by us without declaring the agent, the commission will berecovered with interest.ii that we will accept the responsibility for the satisfactory execution of orders placed on our authorized agent including warranty/ guarantee obligations.iii that, wherever necessary, we will provide requisite inspection and test16 / 28 ing facilities at our works in respect of orders placed on our authorized agent.iv our authorized agents price will not exceed that which we would havequoted.v letter submitted by our agent for inspection of goods would be accompanied by a certificate from us that the goods o ered for inspection as indicated in the letter have been manufactured by us.vi we hereby accept to extend our full support and commitment for all the terms and conditions including guarantee and warranty as per the conditions of contract, technical specifications for the goods and services offered for supply by the above bidder on our behalf against this tender for the entire

Central Government/Public Sector

TRN :35515527 | 22 Oct, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for custom bid for services - annual maintenancecontract for ground support equipment /

Central Government/Public Sector

TRN :35501889 | 10 Oct, 2025

Tender Value : 0

Gwalior - Madhya Pradesh

Tender for gem bids for repair and overhauling service - painting of groundequipments; painting of ground equipments; yes;buyer premises

Central Government/Public Sector

TRN :35485778 | 11 Oct, 2025

Tender Value : 0

Nilgiris - Tamil Nadu

Tender for gem bids for food mixer with ss arm rest, dough divider, semiautomatic chappati machine, bain marie counter with under shelf, lpg pipe line work, multifunctional vegetablecutters, installation and commissioning

State Government

TRN :35487116 | 16 Oct, 2025

Tender Value : 79.89 Lacs

Chandigarh Ut - Chandigarh

Tender for gem bids for mechanical, apparatus for verification of law of polygon of forces simply supported beam apparatus inclined plane andfriction slide apparatus winch crab single purchaseapparatus apparatus for determining centre of gravity ofregular irregular lamina bench grinding machine metallurgical microscope heat treatement furnace mufflefurnace spark test apparatus metallurgical cut offmachine standard prepared readymade samplesspecimen with photographs go-no go thread plug gaugem16x15 made of ss go-no go thread plug gaugem22x15 made of ss go-no go snap gauge measuringrange 50-63 mm made of ss go-no go ring gauge dia22mm with tolerance 0 to minus 21 microns made of ss go-no go ring gauge dia 22mm with tolerance 0 to plus21 microns made of ss slip gauges set surfaceroughness tester magnetic v block dial indicator withstand auto collimator with stand angle deckor with set ofangle gauges screw thread micrometer sine bar length125mm made of ss sine bar length 250mm made of ss feeler gauge comparator stand mechanical comparator clinometer gear tooth vernier meteric thread pitchgauge electronic weighing machine digital tachometer digital torsion testing machine pressure measuringbench hydraulic system trainer kit pneumatic systemtrainer kit pelton wheel turbine test rig francis turbinetest rig infrared thermometer digital pyrometer modelsof safety valve blow off cock steam stop valve feed checkvalve economizer demonstration actual cut section modelof two stroke single cylinder petrol engine model of solexcarburettor model of amal carburettor model of watercooling system of an automobile model of lubricationsystem of ic engine mpfi four stroke four cylinderpetrol engine test rig with eddy current dynamometer bid number gem2025b6723232 dated 26-09-2025 bid document1 130 1 1 model of mpfi system, model of crdi system, tool kit, pressure gauge, compound gauge, thermometer withcase, leak dedector to detect cfc hfcs, thermostaticswitch lp-hp cut out overload protector filters strainersand filter driers, refrigeration cycle testing rig, gascharging kit, split ac test rig, actual cut section model ofscrew compressor, actual cut section model of rotarycompressor, vapour absorption refrigeration test rig, vaccum pump, ice plant trainer, sling psychrometer, single plate clutch, multi plate clutch unit, centrifugalcluth unit, cut section of synchromesh gear box, model ofrack and pinion steering gear, model of power steering gearor re-circulating type worm and wheel or other type ofsteering gear, model of ac pump, model of su pump, automobile electric system, brake master cylinder, slidingmesh gear box, cut section model of 4 cylinder 4 strokepetrol engine, diesel fuel supply system, abs systemtrainer, air compressor for tyre inflation, inverter, electricvehicle kit, software, acetylene cylinder, acetylene pipe15 meter, acetylene regulator with spanner, anvil 50 kgwith stand, earthing cable 50mm 06 meter, electrodeholder simple, electrode holder heavy duty, gloves, handhacksaw frame, oxygen regulator with spanner, oxygencylinder, oxygen pipe 15 meter, single snip, weldingscreen, welding torch high pressure, welding torch lowpressure, carpentry bench vice, firmer chisel, gimlet, plough plane 200 mm, spoke shave plane, tenon saw 12inch -300mm, analog meggar, desert cooler, digital earthtester, earth leakage circuit breaker single phase, earthleakage circuit breaker single phase three phase four pole, electric oven, heat convector, motor coil windingmachine, residual current circuit breaker single phase, residual current circuit breaker single phase three phasefour pole, leg vice 4 inch, swage block 4 inch, benchgrinder 0.5 hp motor, bench vice heavy duty, flat filerough 10inch, flat file smooth 10inch, grinder, pipe vice, round die handle, tap wrench 5by16 inch to 1 inch, edgefolding machine, foot shear machine, funnel stake, grinder machine, hand shear 12inch bent snip aviationsnips, hand stake, hearth anvil, round stake, taper stake, gaggers, hand rammer, ladle, lifter- tong 2 in 1, molding boxes flasks, oil fired tilting type furnace, pneumatic rammer, riddle, sand mix muller, drillingmachine, grinding machine heavy duty, planner, powerhacksaw, shaper, welding cable 50mm copperapparatus for verification of law of polygon offorces:apparatus consisting of a wooden board of approx 20mm thickness of size 24x30 inches, fixed on a woodenslotted frame. four adjustable frictionless aluminium pulleysto be provided in the slots of the frame and the frame to beprovided with suitable arrangements for fixing it to a wall., simply supported beam apparatus:apparatus consists oftwo compression dial type spring balance and a woodenbeam of length 1m, minimum cross section 2cmx5cm withall weights and accessories, inclined plane and friction slideapparatus:apparatus consisting of wooden plane ofminimum size 60x15 cms having adjustment for setting theangle precisely. apparatusshould be supplied completelywith frictionless pulley, linear and circular scale, pan, awheeled trolley and a set of minimum six slide drawshaving bottom of metalic and non metalic materials., winch crab single purchase apparatus:apparatus consistingof a heavy duty c.i. wall brackets. the grooved wheel of 25cm dia and a set of gearing arrangements machine cut //bid details2 / 130 gears to be provided for measurement of efficiency ofwinch crab complete set with accessories., apparatus fordetermining centre of gravity of regular & irregularlamina:apparatus consisting of a rod mounted on a basewith a screw at the topand 8 laminas of clear acrylicmaterial- circular, triangular, square, trapezoidal and fourirregular shapes, bench grinding machine:grinding wheel dia300 mm, width 38mm, bore 1, centre height 910 mm, metallurgical microscope :the microscope should havemagnification 50x to 1500x with binocular head inclined at45 . both side coaxial focusing knobs, quadruple revolvingnosepiece with accurate centering and positive click stop, large coaxial mech. stage for x-y movement of specimen, bright field illuminator 6v-20w halogen lamp with fielddiaphragm, filter slot and bulb centering mechanism withred, green and blue filters . objectives : 10x, 45x, 100x, eyepiece : 5x, 10x, 15x paired . the microscope to besupplied with suitable digital camera resolution 10, 20, 50micrometer which can picturize & camera attachments fortaking photos of microstructure . the instrument should bepainted and supplied with dust cover & wooden box withlock and keys ., heat treatement furnace mufflesurface:rectangular design with regulator, mains indicator, 900-1000 c digital thermo electric pyrometer, mainthermal fuse, 3.5 kw . muffle size 12 6 6 with door . thefurnace should be with good insulation., spark testapparatus :suitable for measuring length of spark of metalsand alloys fitted with scale and pointer with heightadjustable vice for holding specimen, complete withgrinding wheel fitted on 1/2 h.p. motor works on 220v, 50hz supply . the apparatus should be nicely painted andfitted on a stand ., metallurgical cut off machine:suitable forcutting upto 30mm dia metal specimen complete with cutoff wheel fitted on 1 h.p. motor and coolant pump andholding vice, works on 220/230v ac supply ., standardprepared readymade samples/specimen withphotographs:set consists of a low carbon steel, bmedium carbon steel, c high carbon steel, d high speedsteel, e hardened and tempered steel, f grey cast iron, g malleable iron, h s.g. iron, i austenitic stainless steel, j case carburized steel, k aluminum alloy, l copperalloy brass, m powder metallurgy sample, n copperalloy bronze, o muntz metal, p electroplatedcomponent, q white cast iron, r pure aluminium, t purecopper, u magnesium alloy, v dead mild steel and xfusion weld steel, go-no go thread plug gauge : m16 x1.5 made of stainless stee, go-no go thread plug gauge:m22*1.5 made of ss, go-no go snap gauge measuringrange 50-63 mm made of ss:measuring range 50-63 mmmade of ss, go-no go ring gauge dia 22mm withtolerance 0 to minus 21 microns made of ss: 22 withtolerance 0 to - 21 microns made of ss, go-no go ringgauge dia 22mm with tolerance 0 to plus 21 microns madeof ss: 22 with tolerance 0 to + 21 microns made of ss, slipgauges set : surface finish below 0.2 of 1 microns, set ofm122 pieces with 87 set made of ss, surface roughnesstester:measuring range: 360 m minimum profileresolution: 0.02 m minimum minimum measuring range:17.5 mm x axis standards: iso, ansi, vda, jis powersupply: battery & ac adapter, magnetic v block : 70lx 100w x 95 h mm made of ss, dial indicator with stand : leastcount 0.01 mm maximum, auto collimator withstand:with standard accessories like plane reflector, opticalsquare instrument, base with leveling attachment, //bid details3 / 130 magnification 10x or above, lc 1sec, measuring range 30mins of arc in x-y axis, angle deckor with set of anglegauges:micro optic and manual operated with maximumworking distance 12m, should consist of microscope, objective lens, two scales engraved on glass screen, opticalsquare of a 1 sec of arc, accuracy 6 sec of arc, resolution0.5 secs of arc or better and set of angles, screw threadmicrometer:stainless steel 0-25mm screw thread pitchmicrometer: with anvils, sine bar : length of sine bar125mm and made of ss to be used for anglemeasurement, sine barlength: 250mm made of ss :length : 250 mm made of ss to be used for anglemeasurement, feeler gauge : 4 long, 26 leaves made ofss, comparator stand:the comparator stand shouldconsists of a very stable flat ground base and an uprightpillar with a mounting bracket for the dial gauge. horizontaldisplacement for the dial gauge should be provided in themounting bracket. base size: 150 x 150 mm pillar dia: 30mm measuring range: 160 mm horizontal displacement: 40mm throat depth: 130 mm, mechanical comparator:magnification range 300-5000 scale estimation of the orderof 0.001 mm, clinometer : minimum dimensions :75 x 50 x15 mm tools for accurately measuring angles andelevations in various applications., gear tooth vernier :measuring range 0-25 mm with l.c 0.001mm used tomeasure the dimensions of gear teeth, meteric thread pitchgauge:pitch range 0.4 mm to 7 mm with 21 leaves made ofss, electronic weighing machine:capacity, 5kg readabilitymin.1 gm, min. pan diameter 100 mm with lcd displaywith battery, digital tachometer : range 0.5 to 19999 rpmor higher, contact type, with lcd display : used for themeasurement of rpm, digital torsion testing machine: maximum torque capacity 100 nm least count 0.01nm torsion speed 1.5 rpm clearance between grips 0-420 mm grips for round specimen 4 mm 8 mm, 8mm 12 mm grips for flat specimen 2-8 mm width forflat specimen 25 mm motor power 0.5 hp powersupply 3 phase 440 volt 50 hz windows 11 os basedsoftware should be capable of real time graphs, pressuremeasuring bench:the setup should be self containedwater recirculating unit consisting of a pipe line withpressure gauge, u- tube differential manometer, singlecolumn manometer and piezometer tube for measuringdifferent types of pressure. ss sump tank of 50 literscapacity with drain valve, fhp centrifugal pump with motor, control panel with on / off switch, mains indicator, fuses etc.the setup should be arranged in a good quality paintedstructure and should be supplied with instructional manual., hydraulic system trainer kit:hydraulic trainer kit, consisting of the following matching components andaccessories :- 1. hydraulic power pack with 1 external gearpump having a delivery rate of 2.5 pm, approx @1400rpm operating pressure 60 bar, coupled to a single-phase ac motor 230 v ac having start capacitor andon/off switch and overload protection, 2 pressure reliefvalve adjustable from 0-60 bar, 3 oil reservoir> 5 literscapacity having sight glass, drain screw, air filter, and p andt ports. 2. pressure relief valve pilot-operated 3. drip tray.shell size 1160 mm x 760 mm 4. pressure gauge glycerin-damped, indication range of : 0-100 bar 5. four-waydistributor with five ports, equipped with a pressure gauge6. double acting hydraulic cylinder with a control cam, piston diameter 16 mm, piston rod diameter 10 mm, strokelength 200 mm. 7. suitable weight for vertical loading of //bid details4 / 130 hydraulic cylinder 8. mounting kit for weight for realizingpulling and pushing load 9. 3/2 way directional controlvalve with hand lever actuation 10. 4/2- way directionalcontrol valve with hand lever actuation 11. 4/3 waydirectional control closed-center position, with hand leveractuation 12. non-return valve 13. pilot-operated checkvalve pilot to open 14. one-way flow control valve withintegrated check valve 15. t- connector with self sealingcoupling nipples 2 nos. and quick coupling socket 1 no.16. profile plate, anodized aluminum, 100x700 mm, withcarriers, mounting frames and mounting accessories 17.dol starter, pneumatic system trainer kit:pneumatictrainer kit, consisting of the following matching componentsand accessories :-1. single acting cylinder max. strokelength 50 mm. bore dia 20 mm. 2. double acting cylindermax. stroke length 100mm. bore dia 200 mm magnetictype. 3. 3/2- way valve manually actuated normally closed4. 3/2-way valve pneumatically-actuated. spring return. 5.one-way flow control valve. 6. 5/2- way valve withmanually-operated switch 7. 5/2-way valve pneumatically-actuated spring return 8. 5/2-way valve pneumatically-actuated double pilot 9. 3/2-way roller lever valve directactuation normally closed 10. shuttle valve or 11. two-pressure valve and 12. pressure gauge 0-16 bar 13.manifold with self-closing nrv, 6-way 14. push buttonstation for electrical signal input with 3 illuminatedmomentary-contact switches 1 no + 1 nc and 1illuminated maintained-contact switch 1 no + 1 nccontact load 2 a. 15. relay station with 3 relays each with 4contact sets 3 no + 1 nc or change- over type. 5 a 16.3/2-way single solenoid valve with led 17. 5/2-way singlesolenoid valve with manual override and led. 18. 5/2-waydouble solenoid valve with manual override and led. 19.power supply unit, input voltage 85-265 v ac, outputvoltage : 24 v dc, output current : max 4.5 a, short-circuit proof. 20. profile plate . anodised aluminum 1100x700mm, with carriers. mounting frames and mountingaccessories., pelton wheel turbine test rig: outputpower: 1 kw. discharge : 350 lpm approx. supplyhead : 30 m. speed : 1000 rpm approx. impeller :bucket type, nozzle: materia| stainless steel. spear:material stainless steel. dynamometer: rope brake drumtype, drum dia. 200 mm. sump tank: capacity 200 ltrs. water circulation! centrifugal pump, ktrloskar/standardmake, 5 hp, discharge measurement: venturi meter withdifferential pressure manometer. control panel comprisesof: rpm measurement: digital rpm indicator with proximitysensor., francis turbine test rig: output power : 3 kw. discharge : 2000 lpm approx. supply head : 20 mapprox. speed : 1500 rpm approx. runner: curvedvanes type. dynamometer: rope brake drum type, drumdia 300 mm. sump tanl : capacity 400 ltrs. approx. water circulation: centrifugal pump, i|kioskar/standardmake, 15 hp, 3 phase. discharge measurement: venturimeter with differential pressure manometer. control panelcomprises of :rpm measurement: digital rpm indicator withproximity sensor., infrared thermometer :range unto 500degree celsius with digital display, digital pyrometer:opticalsensor radiation pyrometer for temperature measurementon small target to 0.0005 0.0127mm accuracy: 0.5%range selectable digital display: c, f, r, k standardtemperature ranges: unto 1000 c, adjustable emissivitysetting: 0.01 to 1.0, models of safety valve, blow off cock, steam stop valve, feed check valve, economizer:metallic //bid details5 / 130 cut section model, demonstration actual cut section modelof two stroke single cylinder petrol engine:originaldissected, two stroke single cylinder petrol engine of ascooter. engine consisting of carburettor etc. complete withall salient parts sectioned for study of the variouscomponents and their functions., model of solexcarburettor:original carburettor duly sectioned andmounted on base., model of amal carburettor:originalcarburettor duly sectioned and mounted on base., model ofwater cooling system of an automobile:metallic modelshowing various parts of water cooling system, model oflubrication system of i.c. engine :actual metallic modelshowing various parts of lubrication system, mpfi, fourstroke four cylinder petrol engine test rig with eddycurrent dynamometer: i. petrol engine: a four strokefour cylinder petrol engine developing about 85 hp withstandard accessories. engine provided with water cooledradiator system, self-starter with battery, dynamo, lubrication oil filter, fuel pump, ignition coil, exhaust silencer.engine provided with switches for conducting morse test.ii. loading device: an eddy current dynamometermust be provided with the engine which is directly coupledand should have cooling system. iii. suitable arrangementfor fuel consumption measurement. iv. latest suitablearrangement for air intake and exhaust gasmeasurement.temperature sensor for measuring the airintake temperature to be provided. a temperature sensoralso provided to measure the exhaust gas temperature.suitable arrangement for measurment of heat carried awayby cooling water. v. panel board : the entiretemperature and other parameter measuring devicesmounted on separate panel board. it also consists of ignitionand starting switch and switch assembly for cutting off eachcylinder for conducting morse test with control of eddycurrent dynamometer loading. , model of mpfi system:actual working metallic model showing various parts ofmpfi system, model of crdi system :actual working metallicmodel showing various parts of crdi system, tool kit:kitconsists of cutting toolstube cutter, bending tool, flaringtool, swaging tool & brazing tool for copper pipeused forrepair and maintenance of refrigeration equipmentequipment, pressure gauge : size 0-300 lb/sq inch., compound gauge : 30-0-150 lb. 2.5 dial 1/8 inches hpt, thermometer with case : range 0 to 250 degree celcius, leak dedector to detect cfc & hfcs:leak detector withprobe minimum 14 inch long made up of stainless steel andhose, led display, leak alarm and able to detect cfc hfcs, thermostatic switch, lp/hp cut out, overload protector, filters, strainers and filter driers: thermostatic switch, lp/hp cut out, overload protector, filters, strainers andfilter drier fitted on board, refrigeration cycle testingrig:vapour compression type consisting of refrigerationcycle demonstration equipments compressor : 1/3 hpcondensor fin : air cooled solenoid valve, expansion valve, capillary expansion, lp-hp cutout, pressure and compoundgauge : variac : for applying variable load in evaporatorammeter: digital 0 10a ac lc 0.01 amp voltmeter :digital 0 500v ac lc 1v rota meter: for measuring flowof liquid refrigerant, digital wattmeter for powermeasurement of compressor and heater. pressure gauge 0to 300 psi r-134a temp indicator 6 channel : digital, -500c to1500c lc 0.10c overall size : 4 x 2 x 5 approx , gas charging kit:fitted with vaccum pump withpipe line with different valves and pressure gauges. //bid details6 / 130

Central Government/Public Sector

TRN :35492084 | 13 Nov, 2025

Tender Value : 0

New Delhi - Delhi

Tender for procurement of spares for mirage aircraft

Central Government/Public Sector

TRN :35492307 | 11 Nov, 2025

Tender Value : 0

New Delhi - Delhi

Tender for procurement of spares for mirage aircraft

Related Sub Industries : Aviation Equipment

Aviation Equipment Tenders

List of aviation-equipment Tenders

Tender for comprehensive annual maintenance of electromechanical equipment suitable for goods/parcel etc. to raise /lower from ground floor to first floor at hpo bldg. ferozepur for fy 2025-26

Tender for procurement of spares for il-78 aircraft

Tender for gem bids for professional painting service - painting of equipment;na; ground equipment /

Tender for gem bids for custom bid for services - annual maintenancecontract for ground support equipment /

Tender for gem bids for repair and overhauling service - painting of groundequipments; painting of ground equipments; yes;buyer premises

Tender for gem bids for food mixer with ss arm rest, dough divider, semiautomatic chappati machine, bain marie counter with under shelf, lpg pipe line work, multifunctional vegetablecutters, installation and commissioning

Tender for procurement of spares for mirage aircraft

Tender for procurement of spares for mirage aircraft

Get Aviation Equipment Tender Alert...

Related Sub Industries : Aviation Equipment

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us