Latest and live tenders published in united arab emirates. Click on any tender to view further details.
g station fuel tank trench cleaning work. oily water and sludge cleaning work location: g-station 1 main trench: 1.8 m x 75 m x 1.5 m oily water to e removed: 1.8 m x 75 m x 0.20 m 2 trench: 1.8 m x 9.0 m x 1.5 m oily water to e removed: 1.8 m x 9.0 m x 0.20 m 3 pumping station near la 1.5 m x 1.5 x 2.0 m. oily water to e removed 1.5 m x 1.5 x 1.0 m. contractor scope: e fore quote, do site visit and understand scope of work and take measurement for oily water. 1#transfer of usale oil from drain oil collecting tank/ interceptor to the heavy fuel oil tank. 2 pump out the waste oily & water mixture from the pits to the oil tan ker y using pneumatic transfer pump to hazardous waste container 3 degassing of drain oil collecting tank/interceptor 4 otain m an entry permit from third party. 5 removal of sludge from the pits 6contractor shall have valid permit form duai municipality to dispose of the waste oily water 7 contractor shall arrange all the required equipment like compressor; pneumatic pumps, hose, chemicals for desludging, cleaning and transferring oil and the waste. 8 the contractor shall sumit the method statement and risk assessment along with the work permit request dewa scope 1 dewa will supply water free of cost 2 dewa engineer i n charge will assist for entry permit to work etc. general terms and conditions: 1 the contractor should apply for work to permit in advance efore commencing the work. 2 along with the work to permit, the contractor should sumit the method statement, time and work schedule ar chart y indicating each activity & risk assessment. 3 entry pass for the workmen should e applied with visa, passp ort and laor card copies, for each in advance. persons whose names are not availale in the list will not e permitted inside the powe rhouse. 4 entry pass for the vehicle should e applied with copies of registration and for drivers with copies of their driving lice nse. 5 no ojection certificate from the su-contractor should e provided if the contractor hiring manpower. 6 the contractor includ ing group or personal insurance should provide all the safety gear for the manpower. 7 toolox talks should e given y the contractor efore the start of ever days# work y supervisor and the copy should e sumitted to dewa staff. 8 hot work permit should e applied i n advance if required in daily asis. 9 hot permit should e approved y the concerned dewa staff and should ensure the availaility of fire extinguishers efore the start of work. site contact person: arad a moile no: 0504611635 / 0408044632 e mail id: hausahea@dew a.gov.ae
technical and general specification of outsourcing work m station, jeel ali power station title: insitu seat ring replacement of hr sg32 start up vent control valve; size: 12 in, make: cci qty: 01 no. duration: 04 days. a.#scope of work ·#moilize men/equipment within 02 days of advance notice. ·#get ptw permit to work and lc line clearance document from dewa. ·#the following documents to e sumitted to get ptw, o#method statement. o#risk assessment of the work. o#tool ox talk report. ·#ensure area is correctly secur ed and safe to work in all aspects. ·#conduct site survey and safety inspection to assess the working environment. ·#if the working environment safe, then proceed with the following steps. ·#mark the parts orientation efore dismantling. ·#decouple and remove the a ctuator. ·#disassemle the valve internals. ·#install inline oring machine and cut seat seal weld and pull out existing seat. ·#grind and clean the welded area to insert new seat. ·#install new seat ring & prepare for welding. ·#preheat the seat / ody welding area. heating arrangement & technician will e provided y dewa ·#weld the seat on the ody as per applicale wps y oem. welder will e pro vided y dewa ·#check / lue match the seat ring & plug contact area. ·#carry out lapping if required. ·#re assemly the valve, mount actuator, calirate and stroke test. ·#dewa engineer shall e consulted in case of any indication of damages. ·#replacement of spares shall e decided during the joint inspection. ·#all olts & nuts to e cleaned and luricated. ·#the flange olts are to etorque tighten ed. ·#hot tightening of the olts to e done after start up. ·#final inspection shall e done y dewa personnel. ·#cci service specialis t/engineer to e assigned for the jo. ·#02-03 skilled helpers will e assigned y dewa to carry out the jo. ·#cci service specialist/en gineer has to work complete the jo within the target time. ·#de-moilize men and equipment after completion of the jo. ·#inspection & maintenance report to e sumitted to dewa. inspection report with photos to e provided. ·#seat cutting machine and related tools is in contractors scope. ·#proper and tested tools to e used. ·#all lifting & power tools should e with valid test certificate. ·#the contractor shall visit the site and e fully familiar with the work scope efore sumitting the id. ·#dewa scope: o#spares# o#welder with welding machine o#scaffolding erection at site o#02-03 skilled helpers. .#warranty ·#the warranty period for the work shall e on e year from the date of completion of work certified y dewa. ·#in case of any damage/defect of the work carried out under this contr act within this warranty period, the contractor shall attend and carry out the necessary repair work and rectify the defect within s hort period without affecting the production of electricity and water. c.#general terms & conditions ·#the contractor shall visit the site and make himself fully familiar with the work scope, plant access, facilities, complexities, safety measures etc., efore he sumit his id. ·#the contractor shall ensure housekeeping on a daily asis and the contractor shall e responsile for allwaste materi al disposals to designated places. ·#all dewa safety & environment policy, rules and regulation shall e followed at work site during the execution of the work. the contractor#s engineer should e familiar with safety regulations while working in a hazardous area. · #scaffolding if required shall e arranged y dewa. ·#crane if required shall e arranged y dewa. ·#all rigging and transporting equipm ent should e arranged y the contractor. these equipment should e duly tested and certified y the 3rd party inspection agency and the certificates should e produced on demand. qualified rigger, mechanics should e provided. ·#the work shall e executed under dewa sup ervision and as per quality/schedule requirement. ·#contractor#s supervisor shall e availale at site throughout the period of work. ·#entry permits for the staff/workers should e applied with passport copies having valid visa. persons, whose names are not availale in the list, will not e allowed to enter the powerhouse. ·#entry permits for the vehicle should e applied with copies of vehicle re gistration. ·#dewa will arrange necessary ptw / lc / hwp from operation, chemical la / fire department clearances to carry out the s cope of work under this contract. ·#the contractor upon receiving the work permit shall first ensure a safe working condition. ·#all the persons should wear all the required ppe while at work. ·#all material and tools rought in shall e declared at power station se curity gate and the list of these items shall e signed y dewa security. the copies of these documents shall e lodged with dewa engin eer in-charge on daily asis. this document will e the asis for the clearance gate pass to take them out on completion of the jo. · #service air, electricity and water for work at dewa site. it is the responsiility of the contractor to have his own arrangement in extending the electricity and water utility to his places of work including lighting. contact person rafael 0524537031/arvind 05539 05432
technical and general specification of outsourcing work m station, jeel ali power station title: refurishment of gearox of hrsg lp steam miv utterfly valve size: 38 in. gearox manufacturer: samo. ind.co.ltd duration: 04 days a.#scope of work: ·#collect & tr ansport the gearox from dewa m station, jeel ali within a day of notice. ·#dismantle the gearox and inspect all components. ·#clean all components. ·#all defects to e rought to the notice of dewa. ·#all damaged parts like gears, earings, housing etc. to e replaced . ·#reassemle the gearox. ·#paint the gearox efore packing. ·#deliver and install the gearox at dewa m station. ·#final inspection f rom dewa personnel. ·#inspection/repair/ndt report with photos to e sumitted. material certificates to e sumitted in the report ·#the contractor shall visit the site to check the gearox and e fully familiar with the work scope efore sumitting the id. .#warranty ·#the warranty period for the work shall e one year from the date of completion of work certified y dewa. ·#in case of any damage/de fect of the work carried out under this contract within this warranty period, the contractor shall attend and carry out the necessar y repair work and rectify the defect within short period without affecting the production of electricity and water. c.#general term s & conditions ·#all transporting equipment should e arranged y the contractor. these equipment should e duly tested and certified y the 3rd party inspection agency and the certificates should e produced on demand. qualified rigger, mechanics should eprovided. · #entry permits for the staff/workers should e applied with passport copies having valid visa. persons, whose names are not availale in the list, will not e allowed to enter the powerhouse. ·#entry permits for the vehicle should e applied with copies of vehicle reg istration. contact person rafael 0524537031/ 048161622 / arvind 0553905432 / 048161612, technical and general specification of outsourcing work m station, jael ali power station title: gearoxes farication for ng all va lves size 8x6 class 150 - 2 no. scope of work ø collect & transport the gearox as sample for gearox farication from dewa m stat ion, jeel ali within a day of notice communication of outage. ø disassemle sample gearox and remove parts inside the casing. ø tak e gearox casing and parts measurements for casting, machining and farication ø re-assemle sample gearox and return to dewa within 1 day after collection. ø casting, machining and farication of gearox as per sample. ø ndt for cracks checking for gearox. ø paint ing of gearox efore packing. ø packing the gearox and deliver at dewa m station. ø sumitting full farication report including mate rial certificates to dewa representative. ·#the contractor shall visit the site to check the gearox and e fully familiar with the w ork scope efore sumitting the id. ø warranty for one year. ø the party should complete the jo within 5 days. .#warranty ·#the w arranty period for the work shall e one year from the date of completion of work certified y dewa. ·#in case of any damage/defect of the work carried out under this contract within this warranty period, the contractor shall attend and carry out the necessary repai r work and rectify the defect within short period without affecting the production of electricity and water. c.#general terms & con ditions ·#all transporting equipment should e arranged y the contractor. these equipment should e duly tested and certified y the 3 rd party inspection agency and the certificates should e produced on demand. qualified rigger, mechanics should e provided. ·#entry permits for the staff/workers should e applied with passport copies having valid visa. persons, whose names are not availale in the list, will not e allowed to enter the powerhouse. ·#entry permits for the vehicle should e applied with copies of vehicle registrati on,
technical specification this enquiry is to supply and faricate gi frame supports for fixing of new lcd tv at l1 station ccr uilding . s##stn.#jo description#quantity of lcd frame supports # 1#l1 # ccr uilding #supply and faricate gi frame supports for fixing of n ew lcd tv#03# scope of work. 1.#removal of existing lcd tv and frames supports. 2.#supply and farication of new tv frame supports, materials shall e use 40x20x3 mm gi channel and 85x30x3 mm angle. 3.#complete frame painting 1st coat prime and final lack mat colo r. complete materials, consumales, for supply and faricate gi frame supports for fixing of new lcd tv shall e arranged y contractor . general condition ü#complete resources including manpower, materials, tools, tackles, etc. required shall e arranged ycontractor . ü#safety of the persons is the responsiility of successful contractor and should strictly follow dewa safety and environment regu lations. ü#the contractor shall have adequate and proven experience in the field. ü#contractor required to sumit risk and method s tatement prior to start the jo. ü#jo carry out shall have warranty for period of one year from date of jo completion. ü#loose dust, scrap waste, and other miscellaneous wastes generated during the execution work should e cleaned / cleared and disposed off on da ily asis, the work area should kept clean at close of each day. ü#the contractor shall visit the site and make himself fully famili ar with the work scope, plant access, facilities, complexities, etc., efore he sumithis offer. dewa will not accept any claim for extras eyond the order rates / prices during and after the execution of work ordered. ü#site visit can e made on any working day fro m sunday through thursday, etween 07:30 and 14:30 hrs. with prior appointment. contact person mr. dayanandan. 04 816 1603 / 050 598 6074.
m-station desal required farication and supply of dn400 grp flanges for replacing the damaged flanges of lime stone filters in lendin g plant. work scope. 1 supply of dn 400 grp flanges. 2 removal existing damaged grp flange 3 farication & site installation of grp flange 4 field joint & lamination of newly installed grp flange. pressure rating pn 16 stiffness: 10000 n/m2 qty: 4 nos. no te: warranty to e provided for more details vinish.sanath@dewa.gov.ae / 048161608 senthilkumar.t@dewa.gov.ae / 048161629 4
project description for repair and lamination of grp firefighting pipe underground size dn250 at e-station near chemical store sco pe of work: 1#repairing or replacing partially grp pipe of existing size-dn250 2#consumales, equipment and tools required for the jo shall e arranged y the contractor 3#risk assessment covering complete activities shall e display on site 4#responsile supervis or from the contractor shall conduct tool ox talk to their staff. note-dewa will provide water and electric supply required for the jo will e arranged y dewa.
refurishment and repairing of c analyzer make: programma, model : tm1600. for execute please contact mr. ashif 04-3229804,
expansion replacement work at e-station in #jeel ali power station technical specification and general terms & conditions title: hr sg#4 pre-heater expansion joint replacement work replacement of faric expansion joints to e done as per existing installed sizes & lengths including all attachments in ph-iii, oiler hrsg-5 at e station as per attached scope of work. existing expansion joints# d etails are as follows. 1. faric expansion joint size-width:260mm;length:5500mm; 2. olster size-width:200mm, length:5000mm, 140mm cer amic wool 3. olt & nut size:m12x60, 100nos. in each joint 4. numer of faric expansion joints to e replaced:14nos. duration: 14days / oiler scope of work: moilize men and equipment. tool ox talk for the work to e conducted and copy to e sumitted prior start of work. risk analysis for work to e carried out and report to e sumitted prior to start of work. method statements to e sumitted prior t o start of work. removal of expansion joint flange connection all the removed olt and nuts shall e cleaned and luricated remove fari c out layer. remove inner olster cleaning of expansion joints ellow connection duct. weld the support holding hook with casing for i nner olster fix the inner olster fix the faric layer and joining y welding heat sealing all the olts nut to e torque tightened. al l the required tools and tackles for the installation shall e rought y supplier dewa will not provide any tools and tackles and manp ower. housekeeping of the site and proper waste disposal as per dewa safety rule. work completion report shall e sumittedwith detai led description and photos. work period # 4 days warranty # one year technical specification and general terms & conditions the c ontractor shall visit the site and make himself fully familiar with the work scope, plant access, facilities, complexities, safety m easures etc., efore he sumit his id. the contractor shall sumit the schedule of work the period efore commencement of the work and shall e approved y dewa. dewa anticipates maximum 3 days all dewa safety & environment policy, rules and regulation shall e followed at work site during the execution of the work. the contractor#s engineer should e familiar with safety regulations while working in a hazardous area. all tools required for the contract shall e arranged y thecontractor. all rigging and transporting equipment should e arranged y the contractor. these rigging tools should e duly tested and certified y the 3rd party inspection agency and the certificates should e produced on demand. contractor#s supervisor shall e availale at site throughout the period of work. the work carried out y the contractor shall carry a warranty for one year and the contractor shall attend any defects come out of ad workman ship etc free of charge within this period. the contractor should apply for the permit to work well in advance and this request sha ll e followed with method statement, risk assessment as attachments. hot work permit should apply on daily asis. entry permits for t he workmen should e applied withpassport copies having valid visa. persons, whose names are not availale in the list will not e all owed to enter the power house. entry permits for the vehicle should e applied with copies of police vehicle registration. all the w orkmen should wear the uniform, safety shoes and helmet while at work. toolox talks should e given to the workmen y their supervisor efore start of work. all material and tools rought in shall e declared at power station security gate and the list of these items s hall e signed y dewa security. the copies of these documents shall e lodged with dewa engineer in-charge on daily asis. this docum ent will e the asis for the clearance gate pass to take them out on completion of the jo.in #jeel ali power station technical specification and general terms & conditions title: hr sg#4 pre-heater expansion joint replacement work replacement of faric expansion joints to e done as per existing installed sizes & lengths including all attachments in ph-iii, oiler hrsg-5 at e station as per attached scope of work. existing expansion joints# d etails are as follows. 1. faric expansion joint size-width:360mm;length:22000mm; 2. olster size-width:300mm, length:22000mm, 140mm c eramic wool 3. olt & nut size:m16x60, 700nos. 4. numer of faric expansion joints to e replaced:1no. duration: 14days / oiler scope of work: moilize men and equipment. tool ox talk for the work to e conducted and copy to e sumitted prior start of work. risk analy sis for work to e carried out and reportto e sumitted prior to start of work. method statements to e sumitted prior to start of wor k. removal of expansion joint flange connection all the removed olt and nuts shall e cleaned and luricated remove faric out layer. r emove inner olster cleaning of expansion joints ellow connection duct. weld the support holding hook with casing for inner olster fi x the inner olster fix the faric layer and joining y welding heat sealing all the olts nut to e torque tightened. all the required tools and tackles for the installation shall e rought y supplier dewa will not provide any tools and tackles and manpower. housekee ping of the site and proper waste disposal as per dewa safety rule. work completion report shall e sumitted with detailed description and photos. work period # 4 days warranty # one year technical specification and general terms & conditions the contractor shal l visit the site and make himself fully familiar with the work scope, plant access, facilities, complexities, safety measures etc., efore he sumit his id. the contractor shall sumit the schedule of work the period efore commencement of the work and shall e approv ed y dewa. dewa anticipates maximum 3 days all dewa safety & environment policy, rules and regulation shall e followed at work site during the execution of the work. the contractor#s engineer should e familiar with safety regulations while working in a hazardous area. all tools required for the contract shall e arranged y the contractor. all rigging and transporting equipmentshould e arran ged y the contractor. these rigging tools should e duly tested and certified y the 3rd party inspection agency and the certificates should e produced on demand. contractor#s supervisor shall e availale at site throughout the period of work. the work carried out y the contractor shall carry a warranty for one year and the contractor shall attend any defects come out of ad workmanship etc free of charge within this period. the contractor should apply for the permit to work well in advance and this request shall e followed with method statement, risk assessment as attachments. hot work permit should apply on daily asis. entry permits for the workmen sho uld e applied with passport copies having valid visa. persons, whose names are notavailale in the list will not e allowed to enter the power house. entry permits for the vehicle should e applied with copies of police vehicle registration. all the workmen should wear the uniform, safety shoes and helmet while at work. toolox talks should e given to the workmen y their supervisor efore start o f work. all material and tools rought in shall e declared at power station security gate and the list of these items shall e signed y dewa security. the copies of these documents shall e lodged with dewa engineer in-charge on daily asis. this document will e the asis for the clearance gate pass to take them out on completion of the jo.
supply of s no#description#qunatity# 1#1 inch, endless round polyster sling, length 1.5m, capacity 3tonn#6# 2#2 inch singly ply endless elt, lengt h 2m, capacity 2tonnn#1# 3#2 wide polyster duplex we sling soft eye oth ends, length 2 m, capacity 2 tonn#2# 4#2 wide polyster duple x we sling, end less, length 3.5 m, capacity 4 tonn#4# 5#3wide polyster duplex we sling, flat end less, length 4 m, capacity 3 tonn#2# 6#3wide polyster duplex we sling, std soft eye oth ends, length 3 m, capacity 3 tonn#4# 7#3wide polyster duplex we sling, end less, le ngth 3 m, capacity 3 tonn #2# 8#4wide polyster duplex we sling, soft eye oth ends, length 5.7 m, capacity 4 tonn#2# 9#8inch wide pol yster duplex weing sling, eye oth ends, length 10 m, capacity 4 tonn#2#inch, endless round polyster sling, length 1.5m, capacity 3tonn#6# 2#2 inch singly ply endless elt, lengt h 2m, capacity 2tonnn#1# 3#2 wide polyster duplex we sling soft eye oth ends, length 2 m, capacity 2 tonn#2# 4#2 wide polyster duple x we sling, end less, length 3.5 m, capacity 4 tonn#4# 5#3wide polyster duplex we sling, flat end less, length 4 m, capacity 3 tonn#2# 6#3wide polyster duplex we sling, std soft eye oth ends, length 3 m, capacity 3 tonn#4# 7#3wide polyster duplex we sling, end less, le ngth 3 m, capacity 3 tonn #2# 8#4wide polyster duplex we sling, soft eye oth ends, length 5.7 m, capacity 4 tonn#2# 9#8inch wide pol yster duplex weing sling, eye oth ends, length 10 m, capacity 4 tonn#2#sling, length 1.5m, capacity 3tonn#6# 2#2 inch singly ply endless elt, lengt h 2m, capacity 2tonnn#1# 3#2 wide polyster duplex we sling soft eye oth ends, length 2 m, capacity 2 tonn#2# 4#2 wide polyster duple x we sling, end less, length 3.5 m, capacity 4 tonn#4# 5#3wide polyster duplex we sling, flat end less, length 4 m, capacity 3 tonn#2# 6#3wide polyster duplex we sling, std soft eye oth ends, length 3 m, capacity 3 tonn#4# 7#3wide polyster duplex we sling, end less, le ngth 3 m, capacity 3 tonn #2# 8#4wide polyster duplex we sling, soft eye oth ends, length 5.7 m, capacity 4 tonn#2# 9#8inch wide pol yster duplex weing sling, eye oth ends, length 10 m, capacity 4 tonn#2#
refurishment of sewage treatment plant, supply & installation of 2 no#s centrifugal air lower and commissioning d. station ph.2 sco pe of work for dewa: ø#scaffolding for proper access. ø#power supply ø civil repair work & new foundation will e under dewa scope scope of work for supplier: efore starting the jo idder#s responsiility to take the existing corroded structures measurement and make the diagram, faricate the same as it is. 1. cutting corroded portion. after cutting of corroded portion it is mandatory of edg e preparation efore installing new plates. 2.#supply of material 8 mm ms plates, angles, etc. farication and fitting. 3.#it is idd ers responsiility select the suitale electrodes for welding 4.#supply of 2 no#s centrifugal air lower max. output 107m3/hr. and r e location of air lowers, with proper foundation and supports. civil repair work & new foundation will e under dewa scope 5.#scrap o ff the deris using conventional methods. 6.#cover the site using impermeale sheets. 7.#to carry out surface preparation y arasive la st cleaning, surface preparation must ensure the removal of any rust/paint or other contamination. to carry out paintwork, patch coa t as follows: a- coat - two component epoxy intermediate primer to dray film thickness of 25 microns - coats - two component high uild polyamide cured coal tar epoxy to a dry film thickness of 175 microns commissioning of plant: supply of activated sludge and commissioning of sewage plant after refurishment is under supplierscope of work. prior to sumission of the id. the idde rs are, therefore, advised to visit the site in jeel ali power station #d# on prior appointment. understand the scope of work and as sess the quantum of jo. contact, mr. zahid hussain. moile no: 0505805854 office: 048044505.