Latest and live tenders published in united arab emirates. Click on any tender to view further details.

supply of control unit; auma matic for actuators, make- auma, type # ac1.2, com no -13397289, no # 3117ma78352, phase - 3 ph, 400v, i.p -68, c ontrol - profius dp-v2 for mushrif reservoir complex phase-3, actuator with control unit for 300mm valve electric, make- auma, actuator type: sar7.6, actuator com no: 13123230, control unit typ e- ac01.2, control unit com no: 13123230.

supply of encloser;grp, type -for water quality analyzer unit with out instruments, makegrp industries ltd. size-750x750x750. drawing no - grpi en s757575.

supply of eddy current displacement proe make: epro model no.: pr6423/000-000, dual channel shaft viration xmr. make: epro model no.: mms 3110/010-000

supply of lamp tail 24v led, pn:fp-led-05

supply of strut assy front suspension r, suzuki vitara, pn:41602-78k01, hu assy-road w, pathfinder 2009, pn:402024x01a, radiator ruer mounting; nissan xterra; pt#2150610v00, nissan xterra-mounting-ruer, radiator ; p/n -21508-4p00a, hose & tue ass, xtrail 2012, pn:497209h60a, nissan xterra-gasket-liquid; p/n -c8320-00330

supply of cylinder assy, master, toyota fortuner 2009, pn:31420-0k021, cylinder assy, clutch, toyota fortuner 2009, pn:31470-0k060, ignition coil;tyt fortu 2008 2010;part#90919-02260, cover assy; clutch; toyota coaster us year 2008; pn:31210-36340, disc assy; clut; toyota coaster us year 2008; pn:31250-36622, earing assy; toyota coaster us year 2008; pn:31230-36200, earing, radial - coaster, toyota coaster intl no. 687, pn:90363-15017

technical and general specification of outsourcing work m station, jeel ali power station title: refurishment of gearox of hrsg lp steam miv utterfly valve size: 38 in. gearox manufacturer: samo. ind.co.ltd duration: 04 days a.#scope of work: ·#collect & tr ansport the gearox from dewa m station, jeel ali within a day of notice. ·#dismantle the gearox and inspect all components. ·#clean all components. ·#all defects to e rought to the notice of dewa. ·#all damaged parts like gears, earings, housing etc. to e replaced . ·#reassemle the gearox. ·#paint the gearox efore packing. ·#deliver and install the gearox at dewa m station. ·#final inspection f rom dewa personnel. ·#inspection/repair/ndt report with photos to e sumitted. material certificates to e sumitted in the report ·#the contractor shall visit the site to check the gearox and e fully familiar with the work scope efore sumitting the id. .#warranty ·#the warranty period for the work shall e one year from the date of completion of work certified y dewa. ·#in case of any damage/de fect of the work carried out under this contract within this warranty period, the contractor shall attend and carry out the necessar y repair work and rectify the defect within short period without affecting the production of electricity and water. c.#general term s & conditions ·#all transporting equipment should e arranged y the contractor. these equipment should e duly tested and certified y the 3rd party inspection agency and the certificates should e produced on demand. qualified rigger, mechanics should eprovided. · #entry permits for the staff/workers should e applied with passport copies having valid visa. persons, whose names are not availale in the list, will not e allowed to enter the powerhouse. ·#entry permits for the vehicle should e applied with copies of vehicle reg istration. contact person rafael 0524537031/ 048161622 / arvind 0553905432 / 048161612, technical and general specification of outsourcing work m station, jael ali power station title: gearoxes farication for ng all va lves size 8x6 class 150 - 2 no. scope of work ø collect & transport the gearox as sample for gearox farication from dewa m stat ion, jeel ali within a day of notice communication of outage. ø disassemle sample gearox and remove parts inside thecasing. ø tak e gearox casing and parts measurements for casting, machining and farication ø re-assemle sample gearox and return to dewa within 1 day after collection. ø casting, machining and farication of gearox as per sample. ø ndt for cracks checking for gearox. ø paint ing of gearox efore packing. ø packing the gearox and deliver at dewa m station. ø sumitting full farication report including mate rial certificates to dewa representative. ·#the contractor shall visit the site to check the gearox and e fully familiar with the w ork scope efore sumitting the id. ø warranty for one year. ø the party should complete the jo within 5 days. .#warranty ·#the w arranty period for the work shall e one year from the date of completion of workpowerhouse. ·#entry permits for the vehicle should e applied with copies of vehicle registrati on, technical and general specification of outsourcing work m station, jael ali power station title: gearoxes farication for ng all va lves size 6x4 class 600 - 2 no. scope of work ø collect & transport the gearox as sample for gearox farication from dewa m stat ion, jeel ali within a day of notice communication of outage. ø disassemle sample gearox and remove parts inside the casing. ø tak e gearox casing and parts measurements for casting, machining and farication ø re-assemle sample gearox and return to dewa within 1 day after collection. ø casting, machining and farication of gearox as per sample. ø ndt for cracks checking for gearox. øpaint ing of gearox efore packing. ø packing the gearox and deliver at dewa m station. ø sumitting full farication report including mate rial certificates to dewa representative. ·#the contractor shall visit the site to check the gearox and e fully familiar with the w ork scope efore sumitting the id. ø warranty for one year. ø the party should complete the jo within 5 days. .#warranty ·#the warranty period for the work shall e one year from the date of completion of work certified y dewa. ·#in case of any damage/defect o f the work carried out under this contract within this warranty period, the contractor shall attend and carry out the necessary repa ir work and rectify the defect within short period without affecting theproduction of electricity and water. c.#general terms & co nditions ·#all transporting equipment should e arranged y the contractor. these equipment should e duly tested and certified y the 3rd party inspection agency and the certificates should e produced on demand. qualified rigger, mechanics should e provided. ·#entry permits for the staff/workers should e applied with passport copies having valid visa. persons, whose names are not availale in the list, will not e allowed to enter the powerhouse. ·#entry permits for the vehicle should e applied with copies of vehicle registrat ion.

services for 2nos kone elevator installed at k-station whr-51/53: works include routine maintenance, troule shooting & repair/repla ce spare parts for one year. also half yearly load test & 3rd party inspection twice. for technical clarifications party can cont act elow dewa personnel: 1. mr. mohamed sayed mahdi dy sr manager - emd k, moile: 0506585828. 2. mr. ameer asha shaik sr.eng ineer - emd k, moile: 0553876541. quotations to e otained only from oem m/s. kone & their authorized service agents/parties. par ty should visit the site & sumit their quotation in aed only.

expansion joint replacement work at g - station jeel ali power station technical specification and general terms & conditions ti tle: expansion joint replacement at whr # 31 for dd y pass stack # total 1 nos. duration: total 10 days max. expansion joint specifi cation: store code 3600022507 doule expansion joint with control guide. ptfe coated outer elt with insulation olster and joining kit as per drawing# 12250-10 rev a. design temp-600 deg c, pr -700mm/-500mm h20, 5907x6566, 6258x6258mm. mfg -whalco or equivalent. scope of work: method statements to e sumitted prior to start of work. risk analysis for work to e carried out and report to e sumitted p rior to start of work. moilize men and equipment. toolox talk for the work to e conducted and copy to e sumitted priorstart of work . removal of expansion joint flange connection all the removed olt and nuts shall e cleaned and luricated remove faric out layer. re move outer olster ag remove inner olster ag cleaning of expansion joints ellow connection duct. weld the support-holding hook with c asing for inner olster fix the inner olster fix the outer olster fix the faric layer and joining y welding heat sealing all the ol ts nut to e torque tightened. supplier shall ring all the required tools and tackles for the installation dewa will not provide any tools, tackles, and work force. housekeeping of the site and proper waste disposal as per dewa safety rule. work completion report s hall e sumitted with detailed description and phots. work period # total10 days warranty # one year technicalspecification and gene ral terms & conditions the contractor shall visit the site and make himself fully familiar with the work scope, plant access, facili ties, complexities, safety measures etc., efore he sumit his id the contractor shall sumit the schedule of work the period efore com mencement of the work and shall e approved y dewa. dewa anticipates maximum 3 days all dewa safety & environment policy, rules and r egulation shall e followed at work site during the execution of the work. the contractor#s engineer should e familiar with safety regulations while working in a hazardous area. the contractor shall arrange all tools required for the contract. all rigging and tra nsporting equipment should e arranged y the contractor. these rigging toolsshould e duly tested and certified y the third party ins pection agency and the certificates should e produced on demand. contractor#s supervisor shall e availale at site throughout the per iod of work. the work carried out y the contractor shall carry a warranty for one year and the contractor shall attend any defects c ome out of ad workmanship etc. free of charge within this period. the contractor should apply for the permit to work well in advance and this request shall e followed with method statement, risk assessment as attachments hot work permit should apply on daily asis. entry permits for the workers should e applied with passport copies having valid visa. entry permits for the vehicle should e appli ed with copies of police vehicleregistration. all the workers should wear the uniform, safety shoes and helmet while at work. tool ox talks should e given to the workers y their supervisor efore start of work. all material and tools rought in shall e declared at power station security gate and the list of these items shall e signed y dewa security. the copies of these documents shall e lodge d with dewa engineer in-charge on daily asis. this document will e the asis for the clearance gate pass to take them out on compl etion of the jo. dewa scope: 1 lc arrangement. 2 material: expansion joint, nut olts etc. 3 scaffolding where ever required. 4 entry pass for contractor. for site visit contact 1 arad a 0504611635, hausahea@dewa.gov.ae 2 aasaithami 0508847736, aasaithami.

scope of work for h1 ldg. replacement of monkey ladders with step ladder: 1. removal of existing monkey ladder 3 meters# length 2. faricating and mounting of 1 no. 1000mmx2900mmx3900mm wxhxl new step type ladder at dewa designated location.each step height is 180mm 3. the grating of the ladder must e of mild steel s275jr, pattern n50, load ar size 40mmx4mm, load ar pitch 30mm, load ar type plain/serrated and cross ar pitch 50mm 4. the ladder shall e galvanized and painted. 5. ladders must e mounted at oth the ends with olts with hand railing provision. 6. 3 nos of ramps 1350mmx 180mm x 1100mm, length x height x width to e faricated and fixed at dewa designated location. 7. civil work if any must e taken care y the contractor. 8. support services like crane, forkli ft and scaffolding will e provided y dewavendor shall visit the site to know the complete scope of work efore sumitting the quotat ion. for site visit, they may contact mr. venkata ramana sidagam, sr. engineer, mo: +971 588732543/ 04-804-4475/ mr. saheel, sr. su pervisor, mo: +971 505757432/04-804-4466